The charge input threshold voltage register on the MAX77693 PMIC accepts
four values: 0x0 for 4.3v, 0x1 for 4.7v, 0x2 for 4.8v and 0x3 for 4.9v.
Due to an oversight, the driver calculated the values for 4.7v and above
starting from 0x0, rather than from 0x1 ([(4700000 - 4700000) / 100000]
gives 0).
Add 1 to the calculation to ensure that 4.7v is converted to a register
value of 0x1 and that the other two voltages are converted correctly as
well.
Fixes: 87c2d90678 ("power: max77693: Add charger driver for Maxim 77693")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250316-max77693-charger-input-threshold-fix-v1-1-2b037d0ac722@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When registering a power-supply device, either a of_node or the more
recent fwnode can be supplied. Since fwnode can also contain an of_node,
let's try to get rid of it.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250225-psy-core-convert-to-fwnode-v1-4-d5e4369936bb@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This removes .of_node from 'struct power_supply', since there
is already a copy in .dev.of_node and there is no need to have
two copies.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250225-psy-core-convert-to-fwnode-v1-1-d5e4369936bb@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-10-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-9-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-8-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-7-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-6-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-5-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-4-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-3-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-2-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The previous patches in this series removed the only caller
and only setter of this method.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250307230225.128775-4-linux@treblig.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
With power_supply_set_battery_charged() deleted in the previous
patch, there's no one left to call the set_charged method.
The only implemented is in ds2760, unwire it and delete the
associated functions and data.
(Arguably it might be time to delete ds2760 since I don't
think there are any users left)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250307230225.128775-3-linux@treblig.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
power_supply_set_battery_charged() has been unused since 2019's
commit 0f884f8a09 ("ARM: pxa: remove raumfeld board files and
defconfig")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250307230225.128775-2-linux@treblig.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* Split devres APIs to a separate header (linux/device/devres.h)
* Move IOMEM_ERR_PTR() to err.h to avoid unneeded loops
* Introduce devm_kmemdup_array()
* Use devm_kmemdup_array() in input, IIO, and pinctrl subsystems
The following is an automated git shortlog grouped by driver:
baytrail:
- copy communities using devm_kmemdup_array()
cherryview:
- use devm_kmemdup_array()
devres:
- Introduce devm_kmemdup_array()
driver core:
- Split devres APIs to device/devres.h
err.h:
- move IOMEM_ERR_PTR() to err.h
iio:
- adc: xilinx-xadc-core: use devm_kmemdup_array()
- imu: st_lsm9ds0: Replace device.h with what is needed
input:
- ipaq-micro-keys: use devm_kmemdup_array()
- sparse-keymap: use devm_kmemdup_array()
intel:
- copy communities using devm_kmemdup_array()
Merge patch series "Split devres APIs to device/devres.h and introduce devm_kmemdup_array()":
- Merge patch series "Split devres APIs to device/devres.h and introduce devm_kmemdup_array()"
pxa2xx:
- use devm_kmemdup_array()
tangier:
- use devm_kmemdup_array()
-----BEGIN PGP SIGNATURE-----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=j1xo
-----END PGP SIGNATURE-----
Merge tag 'ib-devres-iio-input-pinctrl-v6.15' into psy-next
Merge immutable branch introducing devm_kmemdup_array(), so that
it can be used in the sc27xx fuel gauge.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Raag Jadav <raag.jadav@intel.com> says:
This series
1. Splits device/devres.h for the users that are only interested in devres APIs.
Original work by Andy Shevchenko:
https://lore.kernel.org/r/20241203195340.855879-1-andriy.shevchenko@linux.intel.com
2. Introduces a more robust and cleaner devm_kmemdup_array() helper and uses it
across drivers.
The idea behind embedding both work into a single series is to make the review
process easier and reduce conflicts while merging.
Link: https://lore.kernel.org/r/20250212062513.2254767-1-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() which is more robust.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() which is more robust.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Copy communities using devm_kmemdup_array() instead of doing it manually.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Introduce '_array' variant of devm_kmemdup() which is more robust and
consistent with alloc family of helpers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Instead of including a huge device.h with tons of dependencies
include only what driver actually uses.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
device.h is a huge header which is hard to follow and easy to miss
something. Improve that by splitting devres APIs to device/devres.h.
In particular this helps to speedup the build of the code that includes
device.h solely for a devres APIs.
While at it, cast the error pointers to __iomem using IOMEM_ERR_PTR()
and fix sparse warnings.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since IOMEM_ERR_PTR() macro deals with an error pointer, a better place
for it is err.h. This helps avoid dependency on io.h for the users that
don't need it.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Allow a boolean property of "x-powers,no-thermistor" to specify devices
where the ts pin is not connected to anything. This works around an
issue found with some devices where the efuse is not programmed
correctly from the factory or when the register gets set erroneously.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://lore.kernel.org/r/20250204155835.161973-4-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add the vendor specific boolean property of x-powers,no-thermistor.
This property optionally describes hardware where no thermistor is
present on the battery and is specific to the AXP717. In rare
circumstances this value can be set incorrectly in the efuse of the
PMIC, and if it is not hard-coded the device will fail to charge.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250204155835.161973-2-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----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=6RmG
-----END PGP SIGNATURE-----
Merge tag 'tags/ib-mfd-power-v6.15' into psy-next
Immutable branch between MFD and Power due for the v6.15 merge window
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add AXP717_TS_PIN_CFG (register 0x50) to the table of writeable
registers so that the temperature sensor can be configured by the
battery driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250204155835.161973-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Commit 243f8ffc88 ("power: supply: bq27xxx_battery: Notify also about
status changes") intended to notify userspace when the status changes,
based on the flags register. However, the cached state is updated too
early, before the flags are tested for any changes. Remove the premature
update.
Fixes: 243f8ffc88 ("power: supply: bq27xxx_battery: Notify also about status changes")
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20241125152945.47937-1-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The "interrupts" property in the ZynqMP power/reset binding was previously
marked as required. However, there are multiple mechanisms for
handling power/reset events, including:
-Event management registration,
-Mailbox (mboxes),
-Interrupts (interrupts).
When event management support is available (default on Versal SoC), the
"interrupts" property is not used hence not required.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20250217095226.12606-1-shubhrajyoti.datta@amd.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
On the bq27x00 and bq27x10 variants, a number of conditions may reset the value
stored in the NAC register. This will cause capacity, energy, and charge to
report the value 0, even when the battery is full. On the other hand, the chip
also provides a flag, EDVF, which accurately detects the true battery empty
condition, when capacity, charge, and energy are really 0. Therefore, discard
readings for these properties if their value is 0 while EDVF is unset.
Tested on the Nokia N900 with bq27200.
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20250207220605.106768-1-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Report VOLTAGE_MAX_DESIGN for the bq27x00 and bq27x10 fuel gauges. Per the
datasheet, this value is stored in the Charge Termination Voltage Settings
(QV0 and QV1) of the Pack Configuration register.
Tested on the Nokia N900 with bq27200.
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20250207211521.103357-1-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add health property, which checks that temperature, voltage and current are
within limits for the battery. Limits can be programmed in non-volatile
memory.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://lore.kernel.org/r/20250204-max1720x_health-v1-1-97ebbe4a0bc5@liebherr.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
There is a typo in a dev_warn message:
- reqested -> requested
Fix it via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250206083405.10286-1-algonell@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
-----BEGIN PGP SIGNATURE-----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=mWV6
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
- sh: boards: Use imply to enable hardware with complex dependencies
- sh: Migrate to the generic rule for built-in DTB
- sh: irq: Use seq_put_decimal_ull_width() for decimal values
-----BEGIN PGP SIGNATURE-----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=G6GL
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Signed-off-by: Len Brown <len.brown@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZ5yJdgAKCRBZ7Krx/gZQ
69W4AQDwgxceiQ6icx3rFhCWQigne4jdMO84kd8tNaa+xHGe1AD/WnkeChc5DqjQ
wZWZxAAzml9SS01IcSiHWaF5fgrjlA0=
=rXOq
-----END PGP SIGNATURE-----
Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs cleanups from Al Viro:
"Two unrelated patches - one is a removal of long-obsolete include in
overlayfs (it used to need fs/internal.h, but the extern it wanted has
been moved back to include/linux/namei.h) and another introduces
convenience helper constructing struct qstr by a NUL-terminated
string"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add a string-to-qstr constructor
fs/overlayfs/namei.c: get rid of include ../internal.h