Use get_device()/put_device() to keep reset controller devices alive
while their reset controls are acquired.
Enable support for the Amlogic T7 SoC reset controller.
Remove unused EyeQ reset bindings and add a reset controller driver
to be instantiated as auxiliary device by the EyeQ clock driver.
Fix OF node leaks in the k210 and berlin probe() error paths.
Add some simplifications and cleanup in the core, lcp18xx driver, and
uniphier bindings.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCZtg4SBcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwI3XAP4voAnbJS7rvnqv9zr/V0sXM2ml
UORkWFiRVDVCavLxUwEAy/zDc3ZtcPSx64PE0o6t1Ol8+i2nqivqWUR3dj9WUg4=
=qXYX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=NcTE
-----END PGP SIGNATURE-----
Merge tag 'reset-for-v6.12' of git://git.pengutronix.de/pza/linux into soc/drivers
Reset controller updates for v6.12
Use get_device()/put_device() to keep reset controller devices alive
while their reset controls are acquired.
Enable support for the Amlogic T7 SoC reset controller.
Remove unused EyeQ reset bindings and add a reset controller driver
to be instantiated as auxiliary device by the EyeQ clock driver.
Fix OF node leaks in the k210 and berlin probe() error paths.
Add some simplifications and cleanup in the core, lcp18xx driver, and
uniphier bindings.
* tag 'reset-for-v6.12' of git://git.pengutronix.de/pza/linux:
reset: eyeq: add platform driver
Revert "dt-bindings: reset: mobileye,eyeq5-reset: add bindings"
reset: reset-meson: Add support for Amlogic T7 SoC reset controller
dt-bindings: reset: Add Amlogic T7 reset controller
reset: core: add get_device()/put_device on rcdev
reset: lpc18xx: simplify with devm_clk_get_enabled()
reset: lpc18xx: simplify with dev_err_probe()
reset: simplify locking with guard()
reset: k210: fix OF node leak in probe() error path
reset: berlin: fix OF node leak in probe() error path
dt-bindings: reset: socionext,uniphier-glue-reset: add top-level constraints
Link: https://lore.kernel.org/r/20240904103921.1479579-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
QMC driver requires fsl_soc.h to use function get_immrbase().
This header is provided by powerpc architecture and the functions
it declares are defined only when FSL_SOC is selected.
Today the dependency is the following:
depends on CPM1 || QUICC_ENGINE || \
(FSL_SOC && (CPM || QUICC_ENGINE) && COMPILE_TEST)
This dependency tentatively ensure that FSL_SOC is there when doing a
COMPILE_TEST.
CPM1 is only selected by PPC_8xx and cannot be selected manually.
CPM1 selects FSL_SOC
QUICC_ENGINE on the other hand can be selected by ARM or ARM64 which
doesn't select FSL_SOC. QUICC_ENGINE can also be selected with just
COMPILE_TEST.
It is therefore possible to end up with CPM_QMC selected
without FSL_SOC.
So fix it by making it depend on FSL_SOC at all time.
The rest of the above dependency is the same as the one for CPM_TSA on
which CPM_QMC also depends, so it can go away, leaving only a simple
dependency on FSL_SOC.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20240904104859.020fe3a9@canb.auug.org.au/
Fixes: 8655b76b70 ("soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Herve Codina says:
================
This series add support for the QUICC Engine (QE) version of TSA and QMC
components.
CPM1 version is already supported and, as the QE version of those
component are pretty similar to the CPM1 version, the series extend
the already existing drivers to support for the QE version.
The TSA and QMC components are tightly coupled and so the series
provides modifications on both components.
Of course, this series can be split if it is needed. Let me know.
The series is composed of:
- Patches 1 and 2: Fixes related to TRNSYNC in the QMC driver
- Patches 3..6: Fixes of checkpatch detected issues in the TSA driver
- Patch 7: The QE TSA device-tree binding
- Patches 8..13: TSA driver preparations for adding support for QE
- Patches 14 and 15: The support for QE in TSA + MAINTAINERS update
- Patch 16: A TSA API improvement needed for the QE QMC driver
- Patch 17: A clarification in the QE QMC driver
- Patches 18..22: Fixes of checkpatch detected issues in the QMC driver
- Patch 23: The QE QMC device-tree binding
- Patches 24..31: QMC driver preparations for adding support for QE
- Patches 32 and 33: Missing features additions in QE code
- Patches 34..36: The QMC support for QE in QMC + MAINTAINERS update
Compared to the previous iteration, this v2 series updates device-tree
bindings and fixes issues detected by kernel test robots.
Related to the QE QMC device-tree binding, I kept the unit address in
decimal and the 3 compatible strings.
================
Link: https://lore.kernel.org/r/20240808071132.149251-1-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
This warning was added by commit 07f86917a4 ("soc/fsl/qbman: Use
shared-dma-pool for QMan private memory allocations") but
RESERVEDMEM_OF_DECLARE usage was removed by
commit 3e62273ac6 ("soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE
usage") . For non-popwerpc platforms, such as ls1043, this warning
is redundant. ls1043 itself uses shared-dma-mem.
Fixes: 3e62273ac6 ("soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20240802021651.3854295-1-xiaolei.wang@windriver.com
[chleroy: Added more details in commit message]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
An iommu domain is allocated in portal_set_cpu() and is attached to
pcfg->dev in the same function.
Use iommu_paging_domain_alloc() to make it explicit.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240610085555.88197-14-baolu.lu@linux.intel.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The Freescale QMC controller driver supports both QE and CPM1.
Add the newly introduced QE files to the existing entry.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-37-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The QUICC Engine (QE) QMC can use a firmware to have the QMC working in
'soft-qmc' mode.
Handle this optional 'soft-qmc' firmware.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-36-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Add support for the QMC (QUICC Multichannel Controller) available in
some PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321.
This QE QMC is similar to the CPM QMC except that it uses UCCs (Unified
Communication Controllers) instead of SCCs (Serial Communication
Controllers). Also, compared against the CPM QMC, this QE QMC does not
use a fixed area for the UCC/SCC parameters area but it uses a dynamic
area allocated and provided to the hardware at runtime.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-35-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The PUSHSCHED command is missing in the QE header file.
This command is supported on MPC8321 and is used to modify the start
address for the task running on a given peripheral. It is needed for the
QMC in order to perform the re-initialization procedure and so, ensure
the correct UCC setup in that case.
Simply add the missing command in the commands list available in the QE
header file.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-34-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Introduce devm_cpm_muram_alloc() and devm_cpm_muram_alloc_fixed(), the
resource-managed version of cpm_muram_alloc and cpm_muram_alloc_fixed().
These resource-managed versions simplify the user avoiding the need to
call cpm_muram_free(). Indeed, the allocated area returned by these
functions will be automatically freed on driver detach.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-33-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of QMC.
In order to prepare the support for the QUICC Engine (QE) version of
QMC, introduce qmc_version to identify versions. This will enable the
code to make the distinction between several QMC implementations.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-32-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles CPM1 version of QMC. Even if GSMRL is specific to
the CPM1 version, the exact same purpose and format register (GUMRL) is
present in the QUICC Engine (QE) version of QMC. Compared to the QE
version, the values defined for the mode bitfield are different and the
0x0A value defined for the QMC mode is CPM1 specific.
In order to prepare the support for the QE version, rename this bitfield
value to clearly identify it as CPM1 specific.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-31-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of QMC, RPACK does not need to
be initialized. This is not the case in the QUICC Engine (QE) version.
In preparation of the support for QE, initialize the RPACK register
when the receiver is initialized and each time it is restarted.
This additional RPACK initialization has no impact in the CPM1 version
of QMC.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-30-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles CPM1 version of QMC and qmc_chan_command() is
clearly CPM1 specific.
In order to prepare the support for the QUICC Engine (QE) version,
rename qmc_chan_command() to reflect that point.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-29-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of QMC and initialize the QMC used
SCC. The QUICC Engine (QE) version uses an UCC (Unified Communication
Controllers) instead of the SCC (Serial Communication Controllers) used
in the CPM1 version. These controllers serve the same purpose and are
used in the same way but their inializations are slightly different.
In order to prepare the support for QE version of QMC, introduce
qmc_init_xcc() to initialize theses controllers (UCC in QE and SCC in
CPM1) and isolate the CPM1 specific SCC initialization in a specific
function.
Also introduce qmc_exit_xcc() for consistency to revert operations done
in qmc_init_xcc().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-28-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of QMC. Resources initialisations
(i.e. retrieving base addresses and offsets of different parts) will
be slightly different in the QUICC Engine (QE) version. Indeed, in QE
version, some resources need to be allocated and are no more "staticaly"
defined.
In order to prepare the support for QE version, introduce
qmc_init_resource() to initialize those resources and isolate the CPM1
specific operations in a specific function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-27-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles CPM1 version of QMC. In the QUICC Engine (QE)
version, some operations done at probe() need to be done in a different
order.
In order to prepare the support for the QE version, changed the sequence
of operation done at probe():
- Retrieve the tsa_serial earlier, before initializing resources.
- Group SCC initialisation and do this initialization when it is really
needed in the probe() sequence.
Having the QE compatible sequence in the CPM1 version does not lead to
any issue and works correctly without any regressions.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-26-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles CPM1 version of QMC. Some hardcoded values are used
several times to initialize the QMC state machine. In the QUICC Engine
(QE) version of QMC, these values are different.
In order to prepare the support for the QE version of QMC and avoid the
copy of the hardcoded values, introduce the qmc_data structure to define
these version specific values.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-25-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Add support for the QMC (QUICC Multichannel Controller) available in
some PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321.
This QE QMC is similar to the CPM QMC except that it uses UCCs (Unified
Communication Controllers) instead of SCCs (Serial Communication
Controllers). Also, compared against the CPM QMC, this QE QMC does not
use a fixed area for the UCC/SCC parameters area but it uses a dynamic
area allocated and provided to the hardware at runtime.
Last point, the QE QMC can use a firmware to have the QMC working in
'soft-qmc' mode.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-24-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
checkpatch.pl signals the following improvement for qmc.c
CHECK: Prefer using the BIT macro
Follow its suggestion and convert the code to BIT() and related macros.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-19-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
QMC_TSA_MASK is a bitfield. The value defined is a specific value of
this bitfield and correspond to the use of 8bit resolution for the
routing entry.
Be accurate and rename the defined constant to reflect this point.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-18-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
TSA consumers in CPM1 implementation don't need to know about the serial
device number used by the TSA component. In QUICC Engine implementation,
this information is needed.
Improve the TSA API with tsa_serial_get_num() in order to provide this
information.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-17-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The Freescale TSA controller driver supports both QE and CPM1.
Add the newly introduced QE files to the existing entry.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-16-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Add support for the time slot assigner (TSA) available in some
PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321.
The QE TSA is similar to the CPM1 TSA except that it uses UCCs (Unified
Communication Controllers) instead of SCCs (Serial Communication
Controllers).
Also, compared against the CPM1 TSA, this QE TSA can handle up to 4 TDMs
instead of 2 and allows to configure the logic level of sync signals.
At a lower level, compared against CPM TSA implementation, some
registers are slightly different even if same features are present.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-15-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles CPM1 version of TSA.
In order to prepare the support for the QUICC Engine (QE) version of
TSA, introduce tsa_version to identify versions. This will enable the
code to make the distinction between several TSA implementations.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-14-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of TSA. Connecting and
disconnecting the SCC to/from the TSA consists in handling SICR register
which is CPM1 specific. The connection and disconnection operation in
the QUICC Engine (QE) version are slightly different.
In order to prepare the support for the QE version, clearly identify
SICR register as specific to CPM1 and isolate its handling done in
connect and disconnect functions.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-13-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of TSA. Setting up TSA consists in
handling SIMODE and SIGMR registers. These registers are CPM1 specific.
Setting up the QUICC Engine (QE) version of TSA is slightly different.
In order to prepare the support for QE version, clearly identify these
registers as CPM1 compatible and isolate their handling in a CPM1
specific function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-12-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of TSA. Compared against QUICC
Engine (QE) version of TSA, CPM1 SIRAM entries are slightly different.
In order to prepare the support for the QE version, clearly identify
these entries and functions handling them as CPM1 compatible.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-11-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Loops handling the tdm array use hardcoded size and the initialization
part uses hardcoded indexes to initialize the array.
Use ARRAY_SIZE() to avoid the hardcoded size and initialize the array
using a loop.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-10-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Add support for the time slot assigner (TSA) available in some
PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321.
This QE TSA is similar to the CPM TSA except that it uses UCCs (Unified
Communication Controllers) instead of SCCs (Serial Communication
Controllers). Also, compared against the CPM TSA, this QE TSA can handle
up to 4 TDMs instead of 2 and allows to configure the logic level of
sync signals.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-8-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
checkpatch.pl signals the following improvement for tsa.c
CHECK: Prefer using the BIT macro
Follow its suggestion and convert the code to BIT() and related macros.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-5-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The tsa_write8() parameter is an u32 value. This is not consistent with
the function itself. Indeed, tsa_write8() writes an 8bits value.
Be consistent and use an u8 parameter value.
Fixes: 1d4ba0b81c ("soc: fsl: cpm1: Add support for TSA")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-4-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The TRNSYNC feature is enabled whatever the number of time-slots used.
The feature is needed only when more than one time-slot is used.
Improve the driver enabling TRNSYNC only when it is needed.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-3-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The TRNSYNC feature is available (and enabled) only in transparent mode.
Since commit 7cc9bda9c1 ("soc: fsl: cpm1: qmc: Handle timeslot entries
at channel start() and stop()") TRNSYNC register is updated in
transparent and hdlc mode. In hdlc mode, the address of the TRNSYNC
register is used by the QMC for other internal purpose. Even if no weird
results were observed in hdlc mode, touching this register in this mode
is wrong.
Update TRNSYNC only in transparent mode.
Fixes: 7cc9bda9c1 ("soc: fsl: cpm1: qmc: Handle timeslot entries at channel start() and stop()")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-2-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The changes in this set remove some unused code and simplify error paths
using scoped helpers.
-----BEGIN PGP SIGNATURE-----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=pomi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aNb0
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.12-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v6.12-rc1
The changes in this set remove some unused code and simplify error paths
using scoped helpers.
* tag 'tegra-for-6.12-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: bpmp: Use scoped device node handling to simplify error paths
firmware: tegra: bpmp: Drop unused mbox_client_to_bpmp()
Link: https://lore.kernel.org/r/20240830141004.3195210-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is a single patch that simplifies code a little by employing the
new scoped OF helpers.
-----BEGIN PGP SIGNATURE-----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=oeVs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Fjd+
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.12-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.12-rc1
This is a single patch that simplifies code a little by employing the
new scoped OF helpers.
* tag 'tegra-for-6.12-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Simplify with scoped for each OF child loop
Link: https://lore.kernel.org/r/20240830141004.3195210-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few main features include:
1. SCMI transport as stand-alone drivers
Currently the SCMI transport layer is being built embedded into in
the core SCMI stack. Some of these transports, despite being currently
part of the main SCMI module, are indeed also registered with different
subsystems like optee or virtio, and actively probed also by those.
This leads to a few awkward and convoluted tricks to properly handle
such interactions at boot time in the SCMI stack.
This change adds the new logic to the core SCMI stack so that each
existing transport is transitioned to be a standi-alone driver. With
that all the probe deferral and awkward retries between the SCMI
core stack and the transports has been removed, since no more needed.
2. Support for obtaining transport descriptors from the devicetree
SCMI platform firmwares might have different designs depending on
the platform. Some of the transport descriptors rely on such design.
E.g. the maximum receive channel timeout value might vary depending
on the specific underlying hardware and firmware design choices.
This change adds support for max-rx-timeout-ms property to describe
the transport needs of a specific platform design. It will be extended
in the future to obtain other such hardware/firmware dependent
transport related descriptors.
3. NXP i.MX95 specific SCMI vendor protocol extensions
SCMI specification allows vendor or platform-specific extensions to
the interface. NXP i.MX95 System Manager(SM) that implements SCMI
extends the interface to implement couple of vendor/platform specific
protocol, namely:
a. Battery Backed Module(BBM) Protocol
This protocol is intended provide access to the battery-backed
module. This contains persistent storage (GPR), an RTC, and the
ON/OFF button. The protocol can also provide access to similar
functions implemented via external board components.
b. MISC Protocol for misc settings
This includes controls that are misc settings/actions that must
be exposed from the SM to agents. They are device specific and
are usually define to access bit fields in various mix block
control modules, IOMUX_GPR, and other GPR/CSR owned by the SM.
4. SCMI debug/tracking metrics
Since SCMI involves interaction with the entity(software, firmware
and/or hardware) providing services or features, it is quite useful
to track certain metrics(for pure debugging purposes) like how many
messages were sent or received, were there any failures, what kind
of failures, ..etc. This feature adds support for the same via debugfs.
Apart from these main features, there are some miscellaneous updates, fixes
and cleanups.
-----BEGIN PGP SIGNATURE-----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=fUHS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbVkXIACgkQYKtH/8kJ
UicZlA//eDFRRTxL5MOHhVY5hpn8Sn0a59Wz0S1x+xy5WnGxxh6EMnyLGr8vxmGp
FREvraghX0/ftPIvDMRD2WgR93R96Q0d10tmLf9Es7iG9WskXqNsWBkTijCdvst4
1iEC/wSu8ab2HGhtoUIM1Wt9R+RlkS7UE0TPRzchGQTM9FdytVv9qECtX9JGi7Wn
CvCgcFGifKyOzigm3a4kf3FPtB8Y/ggPLOoDyIHOlM8lrdGmDh5PXuzbeKMxwSt1
YBZS4T5QaWvwaT8ZOraAMYjNN+PmiL587JbY9L+H+VwPV5VpoxlNmNo3wjkAb1q/
hg4huRJlN7BvN1wTQtsnDpzt4VgnIDOh+RXJ/ulUKSGLQ3TosV88FFIGfAO+KTBP
PaQI4taxcyhsnhl4ab040jumfUbeK8DHwCc1P/HsejYy6H9bmjwFV8WCbSZTNH6g
if6fcGRYIzw8MzeqtTH1qjLwhqYt/iXUahHzzONWzskvzR/kPV1x/mSPQNVcJ51e
rL6D485CjZh85pY7Pvn4+Ylur9uIe9wealipfSFzWlAgo57sTY6xrilO20UHnR6t
n+202dPG8TAoDrpomLsF04rbuV4uhv0gWhtIyCzaJHYfgCUgAQvzniR2T6IaOTM3
ks/SZ0j+sv65/KJd8rO1tZHwgEVwmDElRzO9CPF3pQxMrzKG5iw=
=28qZ
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.12
Few main features include:
1. SCMI transport as stand-alone drivers
Currently the SCMI transport layer is being built embedded into in
the core SCMI stack. Some of these transports, despite being currently
part of the main SCMI module, are indeed also registered with different
subsystems like optee or virtio, and actively probed also by those.
This leads to a few awkward and convoluted tricks to properly handle
such interactions at boot time in the SCMI stack.
This change adds the new logic to the core SCMI stack so that each
existing transport is transitioned to be a standi-alone driver. With
that all the probe deferral and awkward retries between the SCMI
core stack and the transports has been removed, since no more needed.
2. Support for obtaining transport descriptors from the devicetree
SCMI platform firmwares might have different designs depending on
the platform. Some of the transport descriptors rely on such design.
E.g. the maximum receive channel timeout value might vary depending
on the specific underlying hardware and firmware design choices.
This change adds support for max-rx-timeout-ms property to describe
the transport needs of a specific platform design. It will be extended
in the future to obtain other such hardware/firmware dependent
transport related descriptors.
3. NXP i.MX95 specific SCMI vendor protocol extensions
SCMI specification allows vendor or platform-specific extensions to
the interface. NXP i.MX95 System Manager(SM) that implements SCMI
extends the interface to implement couple of vendor/platform specific
protocol, namely:
a. Battery Backed Module(BBM) Protocol
This protocol is intended provide access to the battery-backed
module. This contains persistent storage (GPR), an RTC, and the
ON/OFF button. The protocol can also provide access to similar
functions implemented via external board components.
b. MISC Protocol for misc settings
This includes controls that are misc settings/actions that must
be exposed from the SM to agents. They are device specific and
are usually define to access bit fields in various mix block
control modules, IOMUX_GPR, and other GPR/CSR owned by the SM.
4. SCMI debug/tracking metrics
Since SCMI involves interaction with the entity(software, firmware
and/or hardware) providing services or features, it is quite useful
to track certain metrics(for pure debugging purposes) like how many
messages were sent or received, were there any failures, what kind
of failures, ..etc. This feature adds support for the same via debugfs.
Apart from these main features, there are some miscellaneous updates, fixes
and cleanups.
* tag 'scmi-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (31 commits)
rtc: support i.MX95 BBM RTC
input: keyboard: support i.MX95 BBM module
firmware: imx: Add i.MX95 MISC driver
firmware: arm_scmi: Add initial support for i.MX MISC protocol
firmware: arm_scmi: Add initial support for i.MX BBM protocol
firmware: arm_scmi: Add NXP i.MX95 SCMI documentation
dt-bindings: firmware: Add i.MX95 SCMI Extension protocol
firmware: arm_scmi: Replace comma with the semicolon
firmware: arm_scmi: Replace the use of of_node_put() to __free(device_node)
firmware: arm_scmi: Fix trivial whitespace/coding style issues
firmware: arm_scmi: Use max-rx-timeout-ms from devicetree
dt-bindings: firmware: arm,scmi: Introduce property max-rx-timeout-ms
firmware: arm_scmi: Remove const from transport descriptors
firmware: arm_scmi: Simplify with scoped for each OF child loop
firmware: arm_scmi: Update various protocols versions
firmware: arm_scmi: Remove legacy transport-layer code
firmware: arm_scmi: Make VirtIO transport a standalone driver
firmware: arm_scmi: Make OPTEE transport a standalone driver
firmware: arm_scmi: Make SMC transport a standalone driver
firmware: arm_scmi: Make MBOX transport a standalone driver
...
Link: https://lore.kernel.org/r/20240830135918.2383664-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The main addition this time is the basic support for FF-A v1.2
specification which includes support for newly added:
1. FFA_MSG_SEND_DIRECT_{REQ,RESP}2
2. FFA_PARTITION_INFO_GET_REGS
3. FFA_YIELD support in direct messaging
Apart from these, the changes include support to fetch the Rx/Tx buffer
size using FFA_FEATURES, addition of the FF-A FIDs for v1.2 and some
coding style cleanups.
-----BEGIN PGP SIGNATURE-----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=BpAd
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbVkQcACgkQYKtH/8kJ
Uie7LxAAoOfhZZQVy7z9fCQa9562H7tCZPCk1hHzw/EgDJLU/9OB+x5QiKoqywFf
4JIAzyJZrWjr+s4zOKYb5szuUCLMYjIvgZqVGu7z9pjcHgWr5fTK180Jhi5K4oXW
lYSBKhjhIdVl1oCdF6WD9uNp3tta85CCOiDcMEi6Flm3+d0WZUO8baZbu2xL0os8
zPvM106bTPU/Afuh/Jd4w1TEta7MKbTW19Rm85F6m7y4DRR+V/FOVGCllwtKwgyH
qfRpkLZQG3jdUOyFNfXcwK/N7t6RRNOio0XycGkDNOa73C6KKF7kgWppHqItyaNy
x1PPsPJbba0kUwz9jzMPS8SXNm83tUIB/q0BGuIq22ucLHSq6Vbpw/vFxrYnVR65
bAIGjU6SyZ2gyqTnnd5o95P2eayIS2hFWZ6TjqzlYN27scMVoYPvRJMdS4ruuJvM
8Oin5/3AenbD8F6gtMy6SRejLlKJBscSfbpm/Ksxt51NHi4WLOJqFWQnjE2l/Yrv
i3aCCuH/+9eLmJHtGzJpQLjN0bo5rq9OPaeGa3v4rJYnw58s6PK6zAyaF6CXspDn
w7Ta5dz5Ldk3D/mcoClfym/joFcA0BApZLxP9Oi7qkLHpc5QTf/BD+1KWUB9CvmX
KAEknA5nw+s6p/zL32p1pFH9GoRJLRUV9+jnXRFWS5N5F/0Whok=
=/d2i
-----END PGP SIGNATURE-----
Merge tag 'ffa-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.12
The main addition this time is the basic support for FF-A v1.2
specification which includes support for newly added:
1. FFA_MSG_SEND_DIRECT_{REQ,RESP}2
2. FFA_PARTITION_INFO_GET_REGS
3. FFA_YIELD support in direct messaging
Apart from these, the changes include support to fetch the Rx/Tx buffer
size using FFA_FEATURES, addition of the FF-A FIDs for v1.2 and some
coding style cleanups.
* tag 'ffa-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fetch the Rx/Tx buffer size using ffa_features()
firmware: arm_ffa: Add support for FFA_YIELD in direct messaging
firmware: arm_ffa: Add support for FFA_MSG_SEND_DIRECT_{REQ,RESP}2
firmware: arm_ffa: Add support for FFA_PARTITION_INFO_GET_REGS
firmware: arm_ffa: Move the function ffa_features() earlier
firmware: arm_ffa: Update the FF-A command list with v1.2 additions
firmware: arm_ffa: Some coding style fixes
Link: https://lore.kernel.org/r/20240830135759.2383431-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add Mobileye EyeQ reset controller driver, for EyeQ5, EyeQ6L and EyeQ6H
SoCs. Instances belong to a shared register region called OLB and gets
spawned as auxiliary device to the platform driver for clock.
There is one OLB instance for EyeQ5 and EyeQ6L. There are seven OLB
instances on EyeQ6H; three have a reset controller embedded:
- West and east get handled by the same compatible.
- Acc (accelerator) is another one.
Each instance vary in the number and types of reset domains.
Instances with single domain expect a single cell, others two.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240730-mbly-reset-v2-2-00b870a6a2ff@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
