Commit graph

783,042 commits

Author SHA1 Message Date
Dan Carpenter
074df25160 PCI: qcom: Fix a bitwise vs logical NOT typo
Fix a typo that accidentally sets "val" to zero when we intended just to
clear BIT(0).

Fixes: 90d52d57cc ("PCI: qcom: Add support for IPQ4019 PCIe controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Acked-by: John Crispin <john@phrozen.org>
2018-05-16 11:04:18 +01:00
Dan Carpenter
6a89e012aa PM / OPP: silence an uninitialized variable warning
Smatch complains that it's possible we print "rate" in the debug output
when it hasn't been initialized.  It should be zero on that path.

Fixes: a1e8c13600 ("PM / OPP: "opp-hz" is optional for power domains")
[ Viresh: Added the Fixes tag ]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-05-16 15:25:44 +05:30
Waiman Long
5a817641f6 locking/percpu-rwsem: Annotate rwsem ownership transfer by setting RWSEM_OWNER_UNKNOWN
The filesystem freezing code needs to transfer ownership of a rwsem
embedded in a percpu-rwsem from the task that does the freezing to
another one that does the thawing by calling percpu_rwsem_release()
after freezing and percpu_rwsem_acquire() before thawing.

However, the new rwsem debug code runs afoul with this scheme by warning
that the task that releases the rwsem isn't the one that acquires it,
as reported by Amir Goldstein:

  DEBUG_LOCKS_WARN_ON(sem->owner != get_current())
  WARNING: CPU: 1 PID: 1401 at /home/amir/build/src/linux/kernel/locking/rwsem.c:133 up_write+0x59/0x79

  Call Trace:
   percpu_up_write+0x1f/0x28
   thaw_super_locked+0xdf/0x120
   do_vfs_ioctl+0x270/0x5f1
   ksys_ioctl+0x52/0x71
   __x64_sys_ioctl+0x16/0x19
   do_syscall_64+0x5d/0x167
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

To work properly with the rwsem debug code, we need to annotate that the
rwsem ownership is unknown during the tranfer period until a brave soul
comes forward to acquire the ownership. During that period, optimistic
spinning will be disabled.

Reported-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-3-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-16 11:45:16 +02:00
Waiman Long
d7d760efad locking/rwsem: Add a new RWSEM_ANONYMOUSLY_OWNED flag
There are use cases where a rwsem can be acquired by one task, but
released by another task. In thess cases, optimistic spinning may need
to be disabled.  One example will be the filesystem freeze/thaw code
where the task that freezes the filesystem will acquire a write lock
on a rwsem and then un-owns it before returning to userspace. Later on,
another task will come along, acquire the ownership, thaw the filesystem
and release the rwsem.

Bit 0 of the owner field was used to designate that it is a reader
owned rwsem. It is now repurposed to mean that the owner of the rwsem
is not known. If only bit 0 is set, the rwsem is reader owned. If bit
0 and other bits are set, it is writer owned with an unknown owner.
One such value for the latter case is (-1L). So we can set owner to 1 for
reader-owned, -1 for writer-owned. The owner is unknown in both cases.

To handle transfer of rwsem ownership, the higher level code should
set the owner field to -1 to indicate a write-locked rwsem with unknown
owner.  Optimistic spinning will be disabled in this case.

Once the higher level code figures who the new owner is, it can then
set the owner field accordingly.

Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-2-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-16 11:45:15 +02:00
Hisao Tanabe
d6c70a86bc HID: core: fix hid_hw_open() comment
Fix comment typo for hid_hw_open().

[jkosina@suse.cz: write at least some changelog]
Signed-off-by: Hisao Tanabe <xtanabe@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-05-16 11:10:33 +02:00
Simon Horman
eedd790236 ARM: multi_v7_defconfig: Enable RENESAS_WDT
R-Car Gen2 and RZ/G1 platforms come with a watchdog IP, therefore enable
its driver by default. It is enabled as a module to avoid increasing
the kernel image size.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 11:08:35 +02:00
Fabrizio Castro
0743559383 ARM: shmobile: defconfig: Enable RENESAS_WDT_GEN
R-Car Gen2 and RZ/G1 platforms come with a watchdog IP, therefore enable
its driver by default.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 11:08:34 +02:00
Simon Horman
c1fcd2ec1b arm64: defconfig: enable R8A77990 SoC
Enable the Renesas R-Car E3 (R8A77990) SoC in the ARM64 defconfig.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-05-16 11:08:20 +02:00
Terry Junge
37e376df5f HID: hid-plantronics: Re-resend Update to map button for PTT products
Add a mapping for Push-To-Talk joystick trigger button.

Tested on ChromeBox/ChromeBook with various Plantronics devices.

Signed-off-by: Terry Junge <terry.junge@plantronics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-05-16 11:06:40 +02:00
Jiri Kosina
99c703acad HID: multitouch: fix types returned from mt_need_to_apply_feature()
Some exit paths from mt_need_to_apply_feature() returned int instead
of bool; fix that up.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-05-16 11:02:07 +02:00
Yoshihiro Shimoda
086b399965 soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}
This patch adds workaround for 3DG-{A,B} of R-Car E3 ES1.0 because
the SoC has a restriction about the order.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:57:44 +02:00
Takeshi Kihara
44b12d4311 soc: renesas: rcar-sysc: Add support for R-Car E3 power areas
This patch adds Cortex-A53 CPU{0,1}, Cortex-A53 SCU, Cortex-R7, A3VC,
A2VC1 and 3DG-{A,B} power domain areas for the R8A77990 SoC.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[shimoda: fix 3DG-{A,B} and add SPDX-License-Identifier]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:57:13 +02:00
Simon Horman
7fad92d058 ARM: dts: r8a7740: Add CEU1
Describe CEU1 peripheral for Renesas R-Mobile A1 R8A7740 Soc.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
2018-05-16 10:54:50 +02:00
Jacopo Mondi
6ff6991bb4 ARM: dts: r8a7740: Add CEU0
Describe CEU0 peripheral for Renesas R-Mobile A1 R8A7740 Soc.

Reported-by: Geert Uytterhoeven <geert@glider.be>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: dropped clock-names property]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:53:18 +02:00
Niklas Söderlund
afa6dceca1 arm64: dts: renesas: salvator-common: enable VIN
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:22 +02:00
Niklas Söderlund
51b0932786 arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:22 +02:00
Niklas Söderlund
98b6badf77 arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:21 +02:00
Niklas Söderlund
0e5819f10b arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:21 +02:00
Niklas Söderlund
e51c09d537 arm64: dts: renesas: r8a7795-es1: add CSI-2 node
Renesas H3 ES1.0 have one extra CSI-2 node, CSI21 which is not present
for later ES versions of H3.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:20 +02:00
Niklas Söderlund
15da7132f1 arm64: dts: renesas: r8a7795: add VIN and CSI-2 nodes
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:19 +02:00
Niklas Söderlund
111d3ffe16 arm64: dts: renesas: r8a77965: add I2C support
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:19 +02:00
Yoshihiro Shimoda
8441ef643d arm64: dts: renesas: r8a77990: ebisu: Enable EthernetAVB
This patch enables EthernetAVB for r8a77990 Ebisu board.

Based on a patch from Takeshi Kihara <takeshi.kihara.df@renesas.com>

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:18 +02:00
Yoshihiro Shimoda
913a78b575 arm64: dts: renesas: r8a77990: Add EthernetAVB device nodes
This patch adds EthernetAVB node for r8a77990 (R-Car E3).

Based on a patch from Takeshi Kihara <takeshi.kihara.df@renesas.com>

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:18 +02:00
Yoshihiro Shimoda
0d292de1eb arm64: dts: renesas: r8a77990: Add GPIO device nodes
This patch adds GPIO nodes for r8a77990 (R-Car E3).

Based on a patch from Takeshi Kihara <takeshi.kihara.df@renesas.com>

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[simon: dropped use of deprecated "renesas,gpio-rcar"]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:17 +02:00
Yoshihiro Shimoda
4ab0df3399 arm64: dts: renesas: r8a77990: Add PFC device node
This patch adds PFC device node for r8a77990 (R-Car E3).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:17 +02:00
Sergei Shtylyov
116a12f7d6 arm64: dts: renesas: initial V3HSK board device tree
Add the initial device  tree for  the V3H Starter Kit board.
The board has 1 debug serial port (SCIF0); include support for it,
so that the serial console can work.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:16 +02:00
Sergei Shtylyov
52d2e0cec7 arm64: dts: renesas: r8a77980: disable EtherAVB
When adding the R8A77980 EtherAVB device I failed to notice that it does
not have the usual "status" property disabling the described devices in
anticipation that the board device trees enable the devices according to
their needs. This causes the EtherAVB driver to successfully probe despite
e.g. the needed pins not having been configured -- luckily, "eth<n>" device
can't be opened anyway...

Fixes: bf6f90832f ("arm64: dts: renesas: r8a77980: add EtherAVB support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:15 +02:00
Sergei Shtylyov
9223eef03f arm64: dts: renesas: r8a77970: disable EtherAVB
When adding the R8A77970 EtherAVB device I failed to notice that it does
not have the usual "status" property disabling the described devices in
anticipation that the board device trees enable the devices according to
their needs. This causes the EtherAVB driver to successfully probe despite
e.g. the needed pins not having been configured -- luckily, "eth<n>" device
can't be opened anyway...

Fixes: bea2ab136e ("arm64: dts: renesas: r8a77970: add EtherAVB support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:15 +02:00
Jacopo Mondi
d86bd47fef arm64: dts: renesas: r8a77995: Add VIN4
Describe VIN4 interface for R-Car D3 R8A77995 SoC.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[simon: sorted node by bus address]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2018-05-16 10:47:14 +02:00
Simon Horman
22fb06cd54 arm64: dts: renesas: r8a77980: add resets property to CAN-FD node
Add resets property to CAN-FD node to describe it in the reset topology of
on-SoC devices.  This allows to reset the CAN-FD device using the Reset
Controller API.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-05-16 10:47:14 +02:00
Geert Uytterhoeven
d005b562be arm64: dts: renesas: r8a77970: Add Cortex-A53 PMU node
Enable the performance monitor unit for the Cortex-A53 cores on the
R-Car V3M (r8a77970) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:13 +02:00
Geert Uytterhoeven
77899dd2c0 arm64: dts: renesas: r8a77970: Add secondary CA53 CPU core
Add a device node for the second Cortex-A53 CPU core on the Renesas
R-Car V3M (r8a77970) SoC, and adjust the interrupt delivery masks for
ARM Generic Interrupt Controller and Architectured Timer.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:12 +02:00
Takeshi Kihara
aa7a6365d0 arm64: dts: renesas: r8a77965: Add SDHI device nodes
Add SDHI nodes to the DT of the r8a77965 SoC.

Based on several similar patches of the R8A7796 device tree
by Simon Horman <horms+renesas@verge.net.au>.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:47:06 +02:00
Geert Uytterhoeven
1c81a633de arm64: dts: renesas: ulcb: Add PMIC DDR Backup Power config
On the R-Car Starter Kit Premier/Pro, all of the DDR0, DDR1, DDR0C, and
DDR1C power rails need to be kept powered when backup mode is enabled.
Reflect this in the "rohm,ddr-backup-power" property for the BD9571MWV
PMIC node.

The accessory power switch (SW8) is a momentary switch, hense specify
"rohm,rstbmode-pulse".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:18 +02:00
Geert Uytterhoeven
d666493fd6 arm64: dts: renesas: salvator-common: Add PMIC DDR Backup Power config
On Salvator-X(S), all of the DDR0, DDR1, DDR0C, and DDR1C power rails
need to be kept powered when backup mode is enabled.  Reflect this in
the "rohm,ddr-backup-power" property for the BD9571MWV PMIC node.

The accessory power switch (SW23) is a toggle switch, hence specify
"rohm,rstbmode-level".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:18 +02:00
Geert Uytterhoeven
786f3cc022 arm64: dts: renesas: ulcb: Add BD9571 PMIC
Add a device node for the ROHM BD9571MWV PMIC.

This was based on the example in the DT binding documentation, but using
IRQ0 instead of a GPIO interrupt, as that matches the schematics, and
because INTC-EX is a simpler block.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:17 +02:00
Geert Uytterhoeven
80f7297c08 arm64: dts: renesas: r8a77965: Correct whitespace
Add missing space after comma.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:16 +02:00
Geert Uytterhoeven
e4d9242a30 arm64: dts: renesas: r8a7796: Correct whitespace
Add missing spaces after commas.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:16 +02:00
Geert Uytterhoeven
399ec3ffb1 arm64: dts: renesas: r8a7795: Correct whitespace
Add missing spaces after commas.
Replace 8 consecutive spaces by a TAB.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:15 +02:00
Yoshihiro Shimoda
610fd5deb1 arm64: dts: renesas: r8a7795: salvator-xs: enable USB2.0 host channel 3
This patch enables USB2.0 host channel 3 for r8a7795 with Salvator-XS.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:14 +02:00
Yoshihiro Shimoda
5650011a06 arm64: dts: renesas: r8a7795: salvator-xs: enable hsusb channel 3 node
This patch enables HS-USB channel3 node for r8a7795 with Salvator-XS.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:14 +02:00
Yoshihiro Shimoda
cd49f631dd arm64: dts: renesas: r8a7795: salvator-xs: enable usb2_phy3 node
This patch enables usb2_phy3 node for r8a7795 with Salvator-XS.
You must change the SW31 to OFF-OFF-ON-ON-ON-ON on the board.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:13 +02:00
Wolfram Sang
99b1eb0f62 arm64: dts: renesas: salvator-common: add eeprom
Add the EEPROM found on Salvator-X and -XS boards for H3, M3-W, and M3-N
on the IIC_DVFS bus.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:12 +02:00
Sergei Shtylyov
7a9706d25f arm64: dts: renesas: condor: add CAN-FD support
Define the Condor board dependent part of the CAN-FD device node.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:11 +02:00
Sergei Shtylyov
f38c417272 arm64: dts: renesas: r8a77980: add CAN-FD support
Define the generic R8A77980 part of the CAN-FD device node.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[simon: consistently use tabs for indentation]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:11 +02:00
Sergei Shtylyov
bb8d20331f arm64: dts: renesas: eagle: add CAN-FD support
Define the Eagle board dependent part of the CAN-FD device node.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:10 +02:00
Sergei Shtylyov
81a579d53a arm64: dts: renesas: r8a77970: add CAN-FD support
Define the generic R8A77970 part of the CAN-FD device node.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:46:09 +02:00
Niklas Söderlund
4c529600ee arm64: dts: renesas: r8a77965: Add R-Car Gen3 thermal support
Based on previous work by Ryo Kataoka <ryo.kataoka.wt@renesas.com>.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[simon: moved thermal node to preseve ordering of nodes by bus address]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:45:19 +02:00
Niklas Söderlund
7e26520fb4 arm64: dts: renesas: r8a77965: use r8a77965-sysc binding definitions
Replace the hardcoded power domain indices by R8A77965_PD_* symbols.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
[simon: dropped hunk to include r8a77965-sysc.h which is already present]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:45:19 +02:00
Sergei Shtylyov
1184ea3fd4 arm64: dts: renesas: r8a77980: use SYSC power domain macros
Now that the commit 7755b40d07 ("dt-bindings: power: add R8A77980 SYSC
power domain definitions") has hit Linus' tree, we can replace  the bare
numbers (we had to use to avoid a cross tree dependency) with these macro
definitions...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16 10:45:18 +02:00