commit a135aa3d30 upstream.
Sort the global Rust flags so that it is easier to follow along when we
have more, like this patch series does.
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 024f9676a6 upstream.
Perform the same clean commit b2516f7af9 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88975 ("rust: workqueue: add
helper for defining work_struct fields"):
Clippy triggered a false positive on its `new_ret_no_self` lint
when using the `pin_init!` macro. Since Rust 1.67.0, that does
not happen anymore, since Clippy learnt to not warn about
`-> impl Trait<Self>` [1][2].
The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.
Link: https://github.com/rust-lang/rust-clippy/issues/7344 [1]
Link: https://github.com/rust-lang/rust-clippy/pull/9733 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit efa11fd269 ]
[BUG]
When running generic/418 with a btrfs whose block size < page size
(subpage cases), it always fails.
And the following minimal reproducer is more than enough to trigger it
reliably:
workload()
{
mkfs.btrfs -s 4k -f $dev > /dev/null
dmesg -C
mount $dev $mnt
$fsstree_dir/src/dio-invalidate-cache -r -b 4096 -n 3 -i 1 -f $mnt/diotest
ret=$?
umount $mnt
stop_trace
if [ $ret -ne 0 ]; then
fail
fi
}
for (( i = 0; i < 1024; i++)); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
With extra trace printk added to the following functions:
- btrfs_buffered_write()
* Which folio is touched
* The file offset (start) where the buffered write is at
* How many bytes are copied
* The content of the write (the first 2 bytes)
- submit_one_sector()
* Which folio is touched
* The position inside the folio
* The content of the page cache (the first 2 bytes)
- pagecache_isize_extended()
* The parameters of the function itself
* The parameters of the folio_zero_range()
Which are enough to show the problem:
22.158114: btrfs_buffered_write: folio pos=0 start=0 copied=4096 content=0x0101
22.158161: submit_one_sector: r/i=5/257 folio=0 pos=0 content=0x0101
22.158609: btrfs_buffered_write: folio pos=0 start=4096 copied=4096 content=0x0101
22.158634: btrfs_buffered_write: folio pos=0 start=8192 copied=4096 content=0x0101
22.158650: pagecache_isize_extended: folio=0 from=4096 to=8192 bsize=4096 zero off=4096 len=8192
22.158682: submit_one_sector: r/i=5/257 folio=0 pos=4096 content=0x0000
22.158686: submit_one_sector: r/i=5/257 folio=0 pos=8192 content=0x0101
The tool dio-invalidate-cache will start 3 threads, each doing a buffered
write with 0x01 at offset 0, 4096 and 8192, do a fsync, then do a direct read,
and compare the read buffer with the write buffer.
Note that all 3 btrfs_buffered_write() are writing the correct 0x01 into
the page cache.
But at submit_one_sector(), at file offset 4096, the content is zeroed
out, by pagecache_isize_extended().
The race happens like this:
Thread A is writing into range [4K, 8K).
Thread B is writing into range [8K, 12k).
Thread A | Thread B
-------------------------------------+------------------------------------
btrfs_buffered_write() | btrfs_buffered_write()
|- old_isize = 4K; | |- old_isize = 4096;
|- btrfs_inode_lock() | |
|- write into folio range [4K, 8K) | |
|- pagecache_isize_extended() | |
| extend isize from 4096 to 8192 | |
| no folio_zero_range() called | |
|- btrfs_inode_lock() | |
| |- btrfs_inode_lock()
| |- write into folio range [8K, 12K)
| |- pagecache_isize_extended()
| | calling folio_zero_range(4K, 8K)
| | This is caused by the old_isize is
| | grabbed too early, without any
| | inode lock.
| |- btrfs_inode_unlock()
The @old_isize is grabbed without inode lock, causing race between two
buffered write threads and making pagecache_isize_extended() to zero
range which is still containing cached data.
And this is only affecting subpage btrfs, because for regular blocksize
== page size case, the function pagecache_isize_extended() will do
nothing if the block size >= page size.
[FIX]
Grab the old i_size while holding the inode lock.
This means each buffered write thread will have a stable view of the
old inode size, thus avoid the above race.
CC: stable@vger.kernel.org # 5.15+
Fixes: 5e8b9ef303 ("btrfs: move pos increment and pagecache extension to btrfs_buffered_write")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9df23801c8 ]
If a file size has bits 0x410 = ATTR_DIRECTORY | ATTR_REPARSE set
then during queryinfo (stat) the file is regarded as a directory
and subsequent opens can fail. A simple test example is trying
to open any file 1040 bytes long when mounting with "posix"
(SMB3.1.1 POSIX/Linux Extensions).
The cause of this bug is that Attributes field in smb2_file_all_info
struct occupies the same place that EndOfFile field in
smb311_posix_qinfo, and sometimes the latter struct is incorrectly
processed as if it was the first one.
Reported-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Tested-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65c49767dd ]
Member 'symlink' is part of the union in struct cifs_open_info_data. Its
value is assigned on few places, but is always read through another union
member 'reparse_point'. So to make code more readable, always use only
'reparse_point' member and drop whole union structure. No function change.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 9df23801c8 ("smb311: failure to open files of length 1040 when mounting with SMB3.1.1 POSIX extensions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e667a1968 ]
Add locking to `vf610_gpio_direction_input|output()` functions. Without
this locking, a race condition exists between concurrent calls to these
functions, potentially leading to incorrect GPIO direction settings.
To verify the correctness of this fix, a `trylock` patch was applied,
where after a couple of reboots the race was confirmed. I.e., one user
had to wait before acquiring the lock. With this patch the race has not
been encountered. It's worth mentioning that any type of debugging
(printing, tracing, etc.) would "resolve"/hide the issue.
Fixes: 659d8a6231 ("gpio: vf610: add imx7ulp support")
Signed-off-by: Johan Korsnes <johan.korsnes@remarkable.no>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250217091643.679644-1-johan.korsnes@remarkable.no
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b35c124f9 ]
There's no need to use the OF-specific variant to get the match data.
Switch to using device_get_match_data() and with that remove the of.h
include. Also remove of_irq.h as none of its interfaces is used here and
order the includes in alphabetical order.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241007102549.34926-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: 4e667a1968 ("gpio: vf610: add locking to gpio direction functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 879f70382f ]
The format of the port width field in the DDI_BUF_CTL and the
TRANS_DDI_FUNC_CTL registers are different starting with MTL, where the
x3 lane mode for HDMI FRL has a different encoding in the two registers.
To account for this use the TRANS_DDI_FUNC_CTL's own port width macro.
Cc: <stable@vger.kernel.org> # v6.5+
Fixes: b66a8abaa4 ("drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-2-imre.deak@intel.com
(cherry picked from commit 76120b3a30)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0c5928dead upstream.
Align bullet points and improve indentation in the `Invariants` section
of the `GenDisk` struct documentation for better readability.
[ Yutaro is also working on implementing the lint we suggested to catch
this sort of issue in upstream Rust:
https://github.com/rust-lang/rust-clippy/issues/13601https://github.com/rust-lang/rust-clippy/pull/13711
Thanks a lot! - Miguel ]
Fixes: 3253aba340 ("rust: block: introduce `kernel::block::mq` module")
Signed-off-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/ZxkcU5yTFCagg_lX@ohnotp
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14cb5d8306 upstream.
Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results
in the following warning:
unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0)
Call Trace:
xen_read_msr+0x1e/0x30
amd_get_mmconfig_range+0x2b/0x80
quirk_amd_mmconfig_area+0x28/0x100
pnp_fixup_device+0x39/0x50
__pnp_add_device+0xf/0x150
pnp_add_device+0x3d/0x100
pnpacpi_add_device_handler+0x1f9/0x280
acpi_ns_get_device_callback+0x104/0x1c0
acpi_ns_walk_namespace+0x1d0/0x260
acpi_get_devices+0x8a/0xb0
pnpacpi_init+0x50/0x80
do_one_initcall+0x46/0x2e0
kernel_init_freeable+0x1da/0x2f0
kernel_init+0x16/0x1b0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the
right course of action, so no change is needed there.
This was most likely exposed by fixing the Xen MSR accessors to not be
silently-safe.
Fixes: 3fac3734c4 ("xen/pv: support selecting safe/unsafe msr accesses")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250307002846.3026685-1-andrew.cooper3@citrix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac1f43c03f upstream.
Commit 0dc23567c2 ("thermal: core: Move lists of thermal instances
to trip descriptors") overlooked the case in which the Power Allocator
governor attempts to bind to a tripless thermal zone and params->trip_max
is NULL in check_power_actors().
No power actors can be found in that case, so check_power_actors() needs
to be made return 0 then to restore its previous behavior.
Fixes: 0dc23567c2 ("thermal: core: Move lists of thermal instances to trip descriptors")
Closes: https://lore.kernel.org/linux-pm/Z0NeGF4ryCe_b5rr@sashalap/
Reported-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2761105.mvXUDI8C0e@rjwysocki.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50cef76d5c upstream.
Load patches for which the driver carries a SHA256 checksum of the patch
blob.
This can be disabled by adding "microcode.amd_sha_check=off" on the
kernel cmdline. But it is highly NOT recommended.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 037e81fb9d upstream.
Put the MSR_AMD64_PATCH_LEVEL reading of the current microcode revision
the hw has, into a separate function.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250211163648.30531-6-bp@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ef0740d10 upstream.
Commit
a7939f0167 ("x86/microcode/amd: Cache builtin/initrd microcode early")
renamed it to save_microcode_in_initrd() and made it static. Zap the
forgotten declarations.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250211163648.30531-3-bp@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78e0aadbd4 upstream
This is the natural thing to do anyway.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a85c08aaa6 upstream.
Instead of open-coding the check for size/data move it inside the
function and make it return a boolean indicating whether data was found
or not.
No functional changes.
[ bp: Write @ret in find_blobs_in_containers() only on success. ]
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241018155151.702350-2-nik.borisov@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b90e7ace7 upstream.
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220
...
Call Trace:
<TASK>
? __early_ioremap+0xef/0x220
? __warn.cold+0x93/0xfa
? __early_ioremap+0xef/0x220
? report_bug+0xff/0x140
? early_fixup_exception+0x5d/0xb0
? early_idt_handler_common+0x2f/0x3a
? __early_ioremap+0xef/0x220
? efi_mokvar_table_init+0xce/0x1d0
? setup_arch+0x864/0xc10
? start_kernel+0x6b/0xa10
? x86_64_start_reservations+0x24/0x30
? x86_64_start_kernel+0xed/0xf0
? common_startup_64+0x13e/0x141
</TASK>
---[ end trace 0000000000000000 ]---
mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187.
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place.
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6ec1e1b07 upstream.
Comparison of bitmaps should be done using bitmap_equal(), not memcmp(),
use the former one to compare isa bitmaps.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Fixes: 625034abd5 ("riscv: add ISA extensions validation callback")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250210155615.1545738-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 564fc8eb6f upstream.
The init_rt_signal_env() funciton is called before the alternative patch
is applied, so using the alternative-related API to check the availability
of an extension within this function doesn't have the intended effect.
This patch reorders the init_rt_signal_env() and apply_boot_alternatives()
to get the correct signal_minsigstksz.
Fixes: e92f469b07 ("riscv: signal: Report signal frame size to userspace via auxv")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241220083926.19453-3-yongxuan.wang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb8179ce29 upstream.
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Cc: stable@vger.kernel.org
Fixes: 76d2a0493a ("RISC-V: Init and Halt Code")
Link: https://lore.kernel.org/r/20241104190314.270095-1-robh@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa49bc2ca8 upstream.
The signal context of certain RISC-V extensions will be appended after
struct __riscv_extra_ext_header, which already includes an empty context
header. Therefore, there is no need to preserve a separate hdr for the
END of signal context.
Fixes: 8ee0b41898 ("riscv: signal: Add sigcontext save/restore for vector")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Andy Chiu <AndybnAC@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241220083926.19453-2-yongxuan.wang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 599c44cd21 upstream.
Make sure the compare value in the lr/sc loop is sign extended to match
what lr.w does. Fortunately, due to the compiler keeping the register
contents sign extended anyway the lack of the explicit extension didn't
result in wrong code so far, but this cannot be relied upon.
Fixes: b90edb3301 ("RISC-V: Add futex support.")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/mvmfrkv2vhz.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 713e788c0e upstream.
When working on OpenRISC support for restartable sequences I noticed
and fixed these two issues with the riscv support bits.
1 The 'inc' argument to RSEQ_ASM_OP_R_DEREF_ADDV was being implicitly
passed to the macro. Fix this by adding 'inc' to the list of macro
arguments.
2 The inline asm input constraints for 'inc' and 'off' use "er", The
riscv gcc port does not have an "e" constraint, this looks to be
copied from the x86 port. Fix this by just using an "r" constraint.
I have compile tested this only for riscv. However, the same fixes I
use in the OpenRISC rseq selftests and everything passes with no issues.
Fixes: 171586a6ab ("selftests/rseq: riscv: Template memory ordering and percpu access mode")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250114170721.3613280-1-shorne@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f27a95845b upstream.
If the device doesn't support arpmb we'll crash due to copying user data in
bsg_transport_sg_io_fn().
In the case where ufs_bsg_exec_advanced_rpmb_req() returns an error, do not
set the job's reply_len.
Memory crash backtrace:
3,1290,531166405,-;ufshcd 0000:00:12.5: ARPMB OP failed: error code -22
4,1308,531166555,-;Call Trace:
4,1309,531166559,-; <TASK>
4,1310,531166565,-; ? show_regs+0x6d/0x80
4,1311,531166575,-; ? die+0x37/0xa0
4,1312,531166583,-; ? do_trap+0xd4/0xf0
4,1313,531166593,-; ? do_error_trap+0x71/0xb0
4,1314,531166601,-; ? usercopy_abort+0x6c/0x80
4,1315,531166610,-; ? exc_invalid_op+0x52/0x80
4,1316,531166622,-; ? usercopy_abort+0x6c/0x80
4,1317,531166630,-; ? asm_exc_invalid_op+0x1b/0x20
4,1318,531166643,-; ? usercopy_abort+0x6c/0x80
4,1319,531166652,-; __check_heap_object+0xe3/0x120
4,1320,531166661,-; check_heap_object+0x185/0x1d0
4,1321,531166670,-; __check_object_size.part.0+0x72/0x150
4,1322,531166679,-; __check_object_size+0x23/0x30
4,1323,531166688,-; bsg_transport_sg_io_fn+0x314/0x3b0
Fixes: 6ff265fc5e ("scsi: ufs: core: bsg: Add advanced RPMB support in ufs_bsg")
Cc: stable@vger.kernel.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Arthur Simchaev <arthur.simchaev@sandisk.com>
Link: https://lore.kernel.org/r/20250220142039.250992-1-arthur.simchaev@sandisk.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57a0ef02fe upstream.
Commit 0d73a55208 ("ima: re-introduce own integrity cache lock")
mistakenly reverted the performance improvement introduced in commit
42a4c60319 ("ima: fix ima_inode_post_setattr"). The unused bit mask was
subsequently removed by commit 11c60f23ed ("integrity: Remove unused
macro IMA_ACTION_RULE_FLAGS").
Restore the performance improvement by introducing the new mask
IMA_NONACTION_RULE_FLAGS, equal to IMA_NONACTION_FLAGS without
IMA_NEW_FILE, which is not a rule-specific flag.
Finally, reset IMA_NONACTION_RULE_FLAGS instead of IMA_NONACTION_FLAGS in
process_measurement(), if the IMA_CHANGE_ATTR atomic flag is set (after
file metadata modification).
With this patch, new files for which metadata were modified while they are
still open, can be reopened before the last file close (when security.ima
is written), since the IMA_NEW_FILE flag is not cleared anymore. Otherwise,
appraisal fails because security.ima is missing (files with IMA_NEW_FILE
set are an exception).
Cc: stable@vger.kernel.org # v4.16.x
Fixes: 0d73a55208 ("ima: re-introduce own integrity cache lock")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fb39882b2 upstream.
In Inline mode, the journal is unused, and journal_sectors is zero.
Calculating the journal watermark requires dividing by journal_sectors,
which should be done only if the journal is configured.
Otherwise, a simple table query (dmsetup table) can cause OOPS.
This bug did not show on some systems, perhaps only due to
compiler optimization.
On my 32-bit testing machine, this reliably crashes with the following:
: Oops: divide error: 0000 [#1] PREEMPT SMP
: CPU: 0 UID: 0 PID: 2450 Comm: dmsetup Not tainted 6.14.0-rc2+ #959
: EIP: dm_integrity_status+0x2f8/0xab0 [dm_integrity]
...
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fb0987682c ("dm-integrity: introduce the Inline mode")
Cc: stable@vger.kernel.org # 6.11+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5534d511b upstream.
Extend protocol_variant structure with protocol field (Cf. socket(2)).
Extend protocol fixture with TCP test suits with protocol=IPPROTO_TCP
which can be used as an alias for IPPROTO_IP (=0) in socket(2).
Signed-off-by: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com>
Link: https://lore.kernel.org/r/20250205093651.1424339-3-ivanov.mikhail1@huawei-partners.com
Cc: <stable@vger.kernel.org> # 6.7.x
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fef0a3b17 upstream.
a6250aa251 ("sched_ext: Handle cases where pick_task_scx() is called
without preceding balance_scx()") added a workaround to handle the cases
where pick_task_scx() is called without prececing balance_scx() which is due
to a fair class bug where pick_taks_fair() may return NULL after a true
return from balance_fair().
The workaround detects when pick_task_scx() is called without preceding
balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid
stalling. Unfortunately, the workaround code was testing whether @prev was
on SCX to decide whether to keep the task running. This is incorrect as the
task may be on SCX but no longer runnable.
This could lead to a non-runnable task to be returned from pick_task_scx()
which cause interesting confusions and failures. e.g. A common failure mode
is the task ending up with (!on_rq && on_cpu) state which can cause
potential wakers to busy loop, which can easily lead to deadlocks.
Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes
@prev_on_scx only used in one place. Open code the usage and improve the
comment while at it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Pat Cody <patcody@meta.com>
Fixes: a6250aa251 ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()")
Cc: stable@vger.kernel.org # v6.12+
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82c387ef75 upstream.
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
__cond_resched+0x21/0x60
down_timeout+0x18/0x60
acpi_os_wait_semaphore+0x4c/0x80
acpi_ut_acquire_mutex+0x3d/0x100
acpi_ns_get_node+0x27/0x60
acpi_ns_evaluate+0x1cb/0x2d0
acpi_rs_set_srs_method_data+0x156/0x190
acpi_pci_link_set+0x11c/0x290
irqrouter_resume+0x54/0x60
syscore_resume+0x6a/0x200
kernel_kexec+0x145/0x1c0
__do_sys_reboot+0xeb/0x240
do_syscall_64+0x95/0x180
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched().
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9a4952067 upstream.
Kernel test robot reported an "imbalanced put" in the rcuref_put() slow
path, which turned out to be a false positive. Consider the following race:
ref = 0 (via rcuref_init(ref, 1))
T1 T2
rcuref_put(ref)
-> atomic_add_negative_release(-1, ref) # ref -> 0xffffffff
-> rcuref_put_slowpath(ref)
rcuref_get(ref)
-> atomic_add_negative_relaxed(1, &ref->refcnt)
-> return true; # ref -> 0
rcuref_put(ref)
-> atomic_add_negative_release(-1, ref) # ref -> 0xffffffff
-> rcuref_put_slowpath()
-> cnt = atomic_read(&ref->refcnt); # cnt -> 0xffffffff / RCUREF_NOREF
-> atomic_try_cmpxchg_release(&ref->refcnt, &cnt, RCUREF_DEAD)) # ref -> 0xe0000000 / RCUREF_DEAD
-> return true
-> cnt = atomic_read(&ref->refcnt); # cnt -> 0xe0000000 / RCUREF_DEAD
-> if (cnt > RCUREF_RELEASED) # 0xe0000000 > 0xc0000000
-> WARN_ONCE(cnt >= RCUREF_RELEASED, "rcuref - imbalanced put()")
The problem is the additional read in the slow path (after it
decremented to RCUREF_NOREF) which can happen after the counter has been
marked RCUREF_DEAD.
Prevent this by reusing the return value of the decrement. Now every "final"
put uses RCUREF_NOREF in the slow path and attempts the final cmpxchg() to
RCUREF_DEAD.
[ bigeasy: Add changelog ]
Fixes: ee1ee6db07 ("atomics: Provide rcuref - scalable reference counting")
Reported-by: kernel test robot <oliver.sang@intel.com>
Debugged-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/oe-lkp/202412311453.9d7636a2-lkp@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68f3ea7ee1 upstream.
In the kernel, there are architectures (x86, arm64) that perform
boot-time relocation (for KASLR) without relying on PIE codegen. In this
case, all const global objects are emitted into .rodata, including const
objects with fields that will be fixed up by the boot-time relocation
code. This implies that .rodata (and .text in some cases) need to be
writable at boot, but they will usually be mapped read-only as soon as
the boot completes.
When using PIE codegen, the compiler will emit const global objects into
.data.rel.ro rather than .rodata if the object contains fields that need
such fixups at boot-time. This permits the linker to annotate such
regions as requiring read-write access only at load time, but not at
execution time (in user space), while keeping .rodata truly const (in
user space, this is important for reducing the CoW footprint of dynamic
executables).
This distinction does not matter for the kernel, but it does imply that
const data will end up in writable memory if the .data.rel.ro sections
are not treated in a special way, as they will end up in the writable
.data segment by default.
So emit .data.rel.ro into the .rodata segment.
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250221135704.431269-5-ardb+git@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8668860b0a upstream.
Before this patch, if the checksum was not used, the subflow was only
reset if map_data_len was != 0. If there were no MPTCP options or an
invalid mapping, map_data_len was not set to the data len, and then the
subflow was not reset as it should have been, leaving the MPTCP
connection in a wrong fallback mode.
This map_data_len condition has been introduced to handle the reception
of the infinite mapping. Instead, a new dedicated mapping error could
have been returned and treated as a special case. However, the commit
31bf11de14 ("mptcp: introduce MAPPING_BAD_CSUM") has been introduced
by Paolo Abeni soon after, and backported later on to stable. It better
handle the csum case, and it means the exception for valid_csum_seen in
subflow_can_fallback(), plus this one for the infinite mapping in
subflow_check_data_avail(), are no longer needed.
In other words, the code can be simplified there: a fallback should only
be done if msk->allow_infinite_fallback is set. This boolean is set to
false once MPTCP-specific operations acting on the whole MPTCP
connection vs the initial path have been done, e.g. a second path has
been created, or an MPTCP re-injection -- yes, possible even with a
single subflow. The subflow_can_fallback() helper can then be dropped,
and replaced by this single condition.
This also makes the code clearer: a fallback should only be done if it
is possible to do so.
While at it, no need to set map_data_len to 0 in get_mapping_status()
for the infinite mapping case: it will be set to skb->len just after, at
the end of subflow_check_data_avail(), and not read in between.
Fixes: f8d4bcacff ("mptcp: infinite mapping receiving")
Cc: stable@vger.kernel.org
Reported-by: Chester A. Unal <chester.a.unal@xpedite-tech.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/544
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Chester A. Unal <chester.a.unal@xpedite-tech.com>
Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-2-f550f636b435@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c157d35146 upstream.
The Intel idle driver is preferred over the ACPI processor idle driver,
but fails to implement the work around for Core2 generation CPUs, where
the TSC stops in C2 and deeper C-states. This causes stalls and boot
delays, when the clocksource watchdog does not catch the unstable TSC
before the CPU goes deep idle for the first time.
The ACPI driver marks the TSC unstable when it detects that the CPU
supports C2 or deeper and the CPU does not have a non-stop TSC.
Add the equivivalent work around to the Intel idle driver to cure that.
Fixes: 18734958e9 ("intel_idle: Use ACPI _CST for processor models without C-state tables")
Reported-by: Fab Stz <fabstz-it@yahoo.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Fab Stz <fabstz-it@yahoo.fr>
Cc: All applicable <stable@vger.kernel.org>
Closes: https://lore.kernel.org/all/10cf96aa-1276-4bd4-8966-c890377030c3@yahoo.fr
Link: https://patch.msgid.link/87bjupfy7f.ffs@tglx
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b150654f74 upstream.
Commit <d74169ceb0> ("iommu/vt-d: Allocate DMAR fault interrupts
locally") moved the call to enable_drhd_fault_handling() to a code
path that does not hold any lock while traversing the drhd list. Fix
it by ensuring the dmar_global_lock lock is held when traversing the
drhd list.
Without this fix, the following warning is triggered:
=============================
WARNING: suspicious RCU usage
6.14.0-rc3 #55 Not tainted
-----------------------------
drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by cpuhp/1/23:
#0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
#1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55
Call Trace:
<TASK>
dump_stack_lvl+0xb7/0xd0
lockdep_rcu_suspicious+0x159/0x1f0
? __pfx_enable_drhd_fault_handling+0x10/0x10
enable_drhd_fault_handling+0x151/0x180
cpuhp_invoke_callback+0x1df/0x990
cpuhp_thread_fun+0x1ea/0x2c0
smpboot_thread_fn+0x1f5/0x2e0
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x12a/0x2d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4a/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat
about a possible deadlock between dmar_global_lock and cpu_hotplug_lock.
This is avoided by not holding dmar_global_lock when calling
iommu_device_register(), which initiates the device probe process.
Fixes: d74169ceb0 ("iommu/vt-d: Allocate DMAR fault interrupts locally")
Reported-and-tested-by: Ido Schimmel <idosch@nvidia.com>
Closes: https://lore.kernel.org/linux-iommu/Zx9OwdLIc_VoQ0-a@shredder.mtl.com/
Tested-by: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250218022422.2315082-1-baolu.lu@linux.intel.com
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64f792981e upstream.
Remove the device comparison check in context_setup_pass_through_cb.
pci_for_each_dma_alias already makes a decision on whether the
callback function should be called for a device. With the check
in place it will fail to create context entries for aliases as
it walks up to the root bus.
Fixes: 2031c469f8 ("iommu/vt-d: Add support for static identity domain")
Closes: https://lore.kernel.org/linux-iommu/82499eb6-00b7-4f83-879a-e97b4144f576@linux.intel.com/
Cc: stable@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20250224180316.140123-1-jsnitsel@redhat.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8789b4296a upstream.
We currently don't gate the power to the SS phy in phy_exit().
Shuffle the code slightly to ensure the power is gated to the SS phy as
well.
Fixes: 32267c29bc ("phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS)")
CC: stable@vger.kernel.org # 6.11+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20241205-gs101-usb-phy-fix-v4-1-0278809fb810@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2158c953c upstream.
In exynos5_usbdrd_{pipe3,utmi}_set_refclk(), the masks
PHYCLKRST_MPLL_MULTIPLIER_MASK and PHYCLKRST_SSC_REFCLKSEL_MASK are not
inverted when applied to the register values. Fix it.
Cc: stable@vger.kernel.org
Fixes: 59025887fb ("phy: Add new Exynos5 USB 3.0 PHY driver")
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250209-exynos5-usbdrd-masks-v1-1-4f7f83f323d7@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55f1a5f7c9 upstream.
Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed
with unexpected value prior to XUSB PADCTL driver, this
could also occur in virtualization scenario.
For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set
a type-c port to host mode and keeps the value to kernel.
If the type-c port is connected a usb host, below errors can be
observed right after usb host mode driver gets probed. The errors
would keep until usb role class driver detects the type-c port
as device mode and notifies usb device mode driver to set both
ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL
driver.
[ 173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad?
[ 173.765837] usb usb3-port2: config error
Taking virtualization into account, asserting XUSB PADCTL
reset would break XUSB functions used by other guest OS,
hence only reset VBUS & ID OVERRIDE of the port in
utmi_phy_init.
Fixes: bbf711682c ("phy: tegra: xusb: Add Tegra186 support")
Cc: stable@vger.kernel.org
Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591
Signed-off-by: BH Hsieh <bhsieh@nvidia.com>
Signed-off-by: Henry Lin <henryl@nvidia.com>
Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 249df695c3 upstream.
There is an off-by-one issue for the err_chained_bd path, it will free
one more tx_swbd than expected. But there is no such issue for the
err_map_data path. To fix this off-by-one issue and make the two error
handling consistent, the increment of 'i' and 'count' remain in sync
and enetc_unwind_tx_frame() is called for error handling.
Fixes: fb8629e2cb ("net: enetc: add support for software TSO")
Cc: stable@vger.kernel.org
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-9-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>