[ Upstream commit de4eda9de2 ]
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: a4f0b00178 ("vsock/virtio: reset connection on receiving queue overflow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d4ea0dfd75 ]
Reported by Sashiko:
The function ipv6_hop_ioam() accesses
__in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returned
idev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptr
via RCU, __in6_dev_get() can return NULL during interface teardown, which
could cause a NULL pointer dereference when processing an IOAM Hop-by-Hop
option.
Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly.
Fixes: 9ee11f0fff ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260517183059.29140-1-justin.iurman@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3ba4dd024d ]
The ice driver's VF queue configuration validation rejects
databuffer_size values below 1024 bytes, which prevents VFs from
using MTU values below 871 bytes.
The iavf driver calculates databuffer_size based on the MTU using:
databuffer_size = ALIGN(MTU + LIBETH_RX_LL_LEN, 128)
where LIBETH_RX_LL_LEN = 26 (ETH_HLEN + 2*VLAN_HLEN + ETH_FCS_LEN).
For MTU values below 871:
MTU 870: 870 + 26 = 896, aligned to 128 = 896 (< 1024, rejected)
MTU 871: 871 + 26 = 897, aligned to 128 = 1024 (>= 1024, accepted)
The 1024-byte minimum seems unnecessarily restrictive, because the hardware
supports databuffer_size as low as 128 bytes (the alignment boundary),
which should allow MTU values down to the standard minimum of 68 bytes.
I haven't found the reason why the limit was configured in the commit
9c7dd7566d ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message"), so
with no more information and since it is working, change the minimum
databuffer_size validation from 1024 to 128 bytes to allow standard low
MTU values while still preventing invalid configurations.
Fixes: 9c7dd7566d ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message")
cc: stable@vger.kernel.org
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aaec7096f9 ]
HSR node-list and node-status generic-netlink operations run under
rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and
hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table
with plain list_del() and frees each node immediately.
That lets a generic-netlink reader hold a struct hsr_node pointer across
hsr_dellink(). In a KASAN build, widening the reader window after
hsr_get_next_node() obtains the node reproduces a slab-use-after-free
when the reader copies node->macaddress_A; the freeing stack is
hsr_del_nodes() from hsr_dellink().
Use list_del_rcu() and defer the free through the existing
hsr_free_node_rcu() callback. This matches the lifetime rule used by the
HSR prune paths, which already delete nodes with list_del_rcu() and
call_rcu().
Fixes: b9a1e62740 ("hsr: implement dellink to clean up resources")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260513233838.3064715-2-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ replaced `list_del`+`call_rcu(hsr_free_node_rcu)` with `list_del_rcu`+`kfree_rcu(node, rcu_head)` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e83f5e24da ]
bt_sock_poll() walks the accept queue without synchronization, while
child teardown can unlink the same socket and drop its last reference.
The unsynchronized accept queue walk has existed since the initial
Bluetooth import.
Protect accept_q with a dedicated lock for queue updates and polling.
Also rework bt_accept_dequeue() to take temporary child references under
the queue lock before dropping it and locking the child socket.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Jann Horn <jannh@google.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 464c702fb9 ]
This makes sure peer information is always available via sock when using
bt_sock_alloc.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: e83f5e24da ("Bluetooth: serialize accept_q access")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6bfa273e53 ]
This consolidates code around sk_alloc into bt_sock_alloc which does
take care of common initialization.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: e83f5e24da ("Bluetooth: serialize accept_q access")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2bccfb8476 ]
If one of the later PF or VF CID bitmap allocations fails,
qed_cid_map_alloc() jumps to cid_map_fail and frees the previously
allocated CID bitmaps before returning an error. qed_cxt_tables_alloc()
then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free()
again.
Fix this by setting each CID bitmap pointer to NULL after bitmap_free()
to avoid double free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime reproduction was not attempted because exercising the failing
allocation path requires device-specific setup.
Fixes: fe56b9e6a8 ("qed: Add module with basic common support")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260520070323.2762379-1-dawei.feng@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5e6c7ccd3e ]
'cid_map' is a bitmap. So use 'bitmap_zalloc()' to simplify code,
improve the semantic and avoid some open-coded arithmetic in allocator
arguments.
Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
Also change some 'memset()' into 'bitmap_zero()' to keep consistency. This
is also much less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 2bccfb8476 ("qed: fix double free in qed_cxt_tables_alloc()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d3f7d17960 ]
MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command,
with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler
then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy
cp->data, but it never checks that those bytes are part of the mgmt
command payload.
A short command can therefore make add_ext_adv_data() pass an
out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond
the command buffer are addressable, they can also be copied into the
advertising instance as scan response data, where the caller can read
them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires
CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte
slab-out-of-bounds read.
Reject commands whose length does not match the fixed header plus both
advertising data lengths before parsing cp->data.
Fixes: 1241057283 ("Bluetooth: Break add adv into two mgmt commands")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 375ba74841 ]
Since the timer uses jiffies as its unit rather than ms, the timeout value
must be converted from ms to jiffies when configuring the timer. Otherwise,
the intended 8s timeout is incorrectly set to approximately 33s.
To improve readability, embed msecs_to_jiffies() directly in the macro
definitions and drop the _MS suffix from macros that now yield jiffies
values: MEMDUMP_TIMEOUT, FW_DOWNLOAD_TIMEOUT, IBS_DISABLE_SSR_TIMEOUT,
CMD_TRANS_TIMEOUT, and IBS_BTSOC_TX_IDLE_TIMEOUT.
IBS_WAKE_RETRANS_TIMEOUT_MS and IBS_HOST_TX_IDLE_TIMEOUT_MS are
intentionally left unchanged. Their values are stored in the struct fields
wake_retrans and tx_idle_delay, which hold ms values at runtime and can be
modified via debugfs. The msecs_to_jiffies() conversion happens at each
call site against the field value, so it cannot be embedded in the macro.
Wake timer depends on commit c347ca17d6
Cc: stable@vger.kernel.org
Fixes: d841502c79 ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
[ adapted to `vmalloc`-based memdump path and older `qca_serdev_shutdown(struct device *dev)` signature ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ab1513597c ]
bt_accept_dequeue() unlinks a not-yet-accepted child from the parent
accept queue and release_sock()s it before returning, so the returned
sk has no caller reference and is unlocked.
l2cap_sock_cleanup_listen() walks these children on listening-socket
close. A concurrent HCI disconnect drives hci_rx_work ->
l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and
frees the child sk and its l2cap_chan; cleanup_listen() then uses both:
BUG: KASAN: slab-use-after-free in l2cap_sock_kill
l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close
Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill
This is distinct from the two fixes already in this area: commit
e83f5e24da ("Bluetooth: serialize accept_q access") serialises the
accept_q list/poll and takes temporary refs inside bt_accept_dequeue(),
and CVE-2025-39860 serialises the userspace close()/accept() race by
calling cleanup_listen() under lock_sock() in l2cap_sock_release().
Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF
still reproduces on current bluetooth/master.
Take the reference at the source: bt_accept_dequeue() does sock_hold()
while sk is still locked, before release_sock(); callers sock_put().
cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under
a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops
it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on
SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under
the parent sk lock and that would invert
conn->lock -> chan->lock -> sk_lock (lockdep).
KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced
12 use-after-free reports per run before this change; 0, and no lockdep
report, over 1600+ raced iterations after it on bluetooth/master.
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Cc: stable@vger.kernel.org
Reported-by: Siwei Zhang <oss@fourdim.xyz>
Reviewed-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Safa Karakuş <safa.karakus@secunnix.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d1ebfce2c1 ]
CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The
intended sender is the cifs.witness helper, but the generic-netlink
operation currently has no capability flag, so any local process can send
RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness
handler.
The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group
capability flags. Register messages sent to that group include the witness
registration id and, for NTLM-authenticated mounts, the username, domain,
and password attributes copied from the CIFS session. An unprivileged
local process should not be able to join that group and receive those
messages.
Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with
GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for
joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The
cifs.witness service runs with the privileges needed for both operations.
Fixes: fed979a7e0 ("cifs: Set witness notification handler for messages from userspace daemon")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cd4d7263d5 ]
As explained in commit e03781879a ("drop_monitor: Require
'CAP_SYS_ADMIN' when joining "events" group"), the "flags" field in the
multicast group structure reuses uAPI flags despite the field not being
exposed to user space. This makes it impossible to extend its use
without adding new uAPI flags, which is inappropriate for internal
kernel checks.
Solve this by adding internal flags (i.e., "GENL_MCAST_*") and convert
the existing users to use them instead of the uAPI flags.
Tested using the reproducers in commit 44ec98ea5e ("psample: Require
'CAP_NET_ADMIN' when joining "packets" group") and commit e03781879a
("drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group").
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d1ebfce2c1 ("smb: client: require net admin for CIFS SWN netlink")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b99206710d ]
Make sure to deregister the controller before releasing underlying
resources like clocks during driver unbind.
Fixes: 17f84b793c ("spi: lantiq-ssc: add support for Lantiq SSC SPI controller")
Cc: stable@vger.kernel.org # 4.11
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260409120419.388546-17-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ adapted spi_controller/host naming to spi_master/master and preserved the int-returning remove() with trailing return 0 ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1985737401 ]
Make sure to deregister the controller before disabling underlying
resources like clocks during driver unbind.
Fixes: 9e862375c5 ("spi: Add new driver for STMicroelectronics' SPI Controller")
Cc: stable@vger.kernel.org # 4.0
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260410081757.503099-18-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ changed spi_controller/host API calls to spi_master/master equivalents ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6a5e3de9c2 ]
lockdep reported a potential deadlock:
a) TCMU device removal context:
- call del_gendisk() to get q->q_usage_counter
- call start_flush_work() to get work_completion of wb->dwork
b) f2fs writeback context:
- in wb_workfn(), which holds work_completion of wb->dwork
- call f2fs_balance_fs() to get sbi->gc_lock
c) f2fs vfs_write context:
- call f2fs_gc() to get sbi->gc_lock
- call f2fs_write_checkpoint() to get sbi->cp_global_sem
d) f2fs mount context:
- call recover_fsync_data() to get sbi->cp_global_sem
- call f2fs_check_and_fix_write_pointer() to call blkdev_report_zones()
that goes down to blk_mq_alloc_request and get q->q_usage_counter
Original callstack is in Closes tag.
However, I think this is a false alarm due to before mount returns
successfully (context d), we can not access file therein via vfs_write
(context c).
Let's introduce per-sb cp_global_sem_key, and assign the key for
cp_global_sem, so that lockdep can recognize cp_global_sem from
different super block correctly.
A lot of work are done by Shin'ichiro Kawasaki, thanks a lot for
the work.
Fixes: c426d99127 ("f2fs: Check write pointer consistency of open zones")
Cc: stable@kernel.org
Reported-and-tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-f2fs-devel/20260218125237.3340441-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[ adapted to plain `struct rw_semaphore` (no `f2fs_rwsem` wrapper) and moved success-path `lockdep_unregister_key` from `kill_f2fs_super` to `f2fs_put_super` where sbi is actually freed ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 68a0178981 ]
When `fileinfo->fi_flags` does not have the `FIEMAP_FLAG_SYNC` bit set
and inline data has not been persisted yet, the physical address of the
extent is calculated incorrectly for unwritten inline inodes.
root@vm:/mnt/f2fs# dd if=/dev/zero of=data.3k bs=3k count=1
root@vm:/mnt/f2fs# f2fs_io fiemap 0 100 data.3k
Fiemap: offset = 0 len = 100
logical addr. physical addr. length flags
0 0000000000000000 00000ffffffff16c 0000000000000c00 00000301
This patch fixes the issue by checking if the inode's address is valid.
If the inline inode is unwritten, set the physical address to 0 and
mark the extent with `FIEMAP_EXTENT_UNKNOWN | FIEMAP_EXTENT_DELALLOC`
flags.
Cc: stable@kernel.org
Fixes: 67f8cf3cee ("f2fs: support fiemap for inline_data")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[ renamed `ifolio` to `ipage` in `inline_data_addr()` and `F2FS_INODE()` calls ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3cf1249289 ]
When an ADD_ADDR needs to be retransmitted and another one has already
been prepared -- e.g. multiple ADD_ADDRs have been sent in a row and
need to be retransmitted later -- this additional retransmission will
need to wait.
In this case, the timer was reset to TCP_RTO_MAX / 8, which is ~15
seconds. This delay is unnecessary long: it should just be rescheduled
at the next opportunity, e.g. after the retransmission timeout.
Without this modification, some issues can be seen from time to time in
the selftests when multiple ADD_ADDRs are sent, and the host takes time
to process them, e.g. the "signal addresses, ADD_ADDR timeout" MPTCP
Join selftest, especially with a debug kernel config.
Note that on older kernels, 'timeout' is not available. It should be
enough to replace it by one second (HZ).
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-6-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ replaced `TCP_RTO_MAX / 8` with `HZ` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5cd6e0ad79 ]
This mptcp_pm_add_timer() helper is executed as a timer callback in
softirq context. To avoid any data races, the socket lock needs to be
held with bh_lock_sock().
If the socket is in use, retry again soon after, similar to what is done
with the keepalive timer.
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-3-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ applied hunk to `net/mptcp/pm_netlink.c` instead of `net/mptcp/pm.c` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 166b783440 ]
When sending an MP_PRIO, closed subflows need to be skipped.
This fixes the case where the initial subflow got closed, re-opened
later, then an MP_PRIO is needed for the same local address.
Note that explicit MP_PRIO cannot be sent during the 3WHS, so it is fine
to use __mptcp_subflow_active().
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Cc: stable@vger.kernel.org
Fixes: b29fcfb54c ("mptcp: full disconnect implementation")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-9-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ applied to renamed function `mptcp_pm_nl_mp_prio_send_ack()` in `pm_netlink.c` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5be7a0cef3 ]
When Kerberos authentication is used with AES-256 encryption (AES-256-CCM
or AES-256-GCM), the SMB3 encryption and decryption keys must be derived
using the full session key (Session.FullSessionKey) rather than just the
first 16 bytes (Session.SessionKey).
Per MS-SMB2 section 3.2.5.3.1, when Connection.Dialect is "3.1.1" and
Connection.CipherId is AES-256-CCM or AES-256-GCM, Session.FullSessionKey
must be set to the full cryptographic key from the GSS authentication
context. The encryption and decryption key derivation (SMBC2SCipherKey,
SMBS2CCipherKey) must use this FullSessionKey as the KDF input. The
signing key derivation continues to use Session.SessionKey (first 16
bytes) in all cases.
Previously, generate_key() hardcoded SMB2_NTLMV2_SESSKEY_SIZE (16) as the
HMAC-SHA256 key input length for all derivations. When Kerberos with
AES-256 provides a 32-byte session key, the KDF for encryption/decryption
was using only the first 16 bytes, producing keys that did not match the
server's, causing mount failures with sec=krb5 and require_gcm_256=1.
Add a full_key_size parameter to generate_key() and pass the appropriate
size from generate_smb3signingkey():
- Signing: always SMB2_NTLMV2_SESSKEY_SIZE (16 bytes)
- Encryption/Decryption: ses->auth_key.len when AES-256, otherwise 16
Also fix cifs_dump_full_key() to report the actual session key length for
AES-256 instead of hardcoded CIFS_SESS_KEY_SIZE, so that userspace tools
like Wireshark receive the correct key for decryption.
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Piyush Sachdeva <psachdeva@microsoft.com>
Signed-off-by: Piyush Sachdeva <s.piyush1024@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[ adapted to legacy crypto_shash API and ses->binding boolean instead of upstream's hmac_sha256 helpers and chan_lock machinery ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f98b48151c ]
parse_sec_desc(), build_sec_desc(), and the chown path in
id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd
before proving a DACL header fits inside the returned security
descriptor.
On 32-bit builds a malicious server can return dacloffset near
U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip
past the later pointer-based bounds checks. build_sec_desc() and
id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped
pointer in the chmod/chown rewrite paths.
Validate dacloffset numerically before building any DACL pointer and
reuse the same helper at the three DACL entry points.
Fixes: bc3e9dd9d1 ("cifs: Change SIDs in ACEs while transferring file ownership.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[ renamed smb_ntsd/smb_acl structs to cifs_ntsd/cifs_acl and kept existing inline ACL size check instead of using missing validate_dacl() helper ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 26735dfdd8 ]
If a device is attached to a PM domain through genpd_dev_pm_attach_by_id(),
genpd calls pm_runtime_enable() for the corresponding virtual device that
it registers. While this avoids boilerplate code in drivers, there is no
corresponding call to pm_runtime_disable() in genpd_dev_pm_detach().
This means these virtual devices are typically detached from its genpd,
while runtime PM remains enabled for them, which is not how things are
designed to work. In worst cases it may lead to critical errors, like a
NULL pointer dereference bug in genpd_runtime_suspend(), which was recently
reported. For another case, we may end up keeping an unnecessary vote for a
performance state for the device.
To fix these problems, let's add this missing call to pm_runtime_disable()
in genpd_dev_pm_detach().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWapT40hV3c+CSBqFOW05aWcV1a6v_NiJYgoYi0i9_PDQ@mail.gmail.com/
Fixes: 3c095f32a9 ("PM / Domains: Add support for multi PM domains per device to genpd")
Cc: stable@vger.kernel.org
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b2aa3b4d64 ]
There currently isn't a max limit an event probe can be. One could make an
event greater than PAGE_SIZE, which makes the event useless because if
it's bigger than the max event that can be recorded into the ring buffer,
then it will never be recorded.
A event probe should never need to be greater than 3K, so make that the
max size. As long as the max is less than the max that can be recorded
onto the ring buffer, it should be fine.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 93ccae7a22 ("tracing/kprobes: Support basic types on dynamic events")
Link: https://patch.msgid.link/20260428122302.706610ba@gandalf.local.home
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[ adjusted context for missing later-kernel infrastructure and used `goto out` instead of `goto fail` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 973e57c726 ]
btrfs_ioctl_space_info() has a TOCTOU race between two passes over the
block group RAID type lists. The first pass counts entries to determine
the allocation size, then the second pass fills the buffer. The
groups_sem rwlock is released between passes, allowing concurrent block
group removal to reduce the entry count.
When the second pass fills fewer entries than the first pass counted,
copy_to_user() copies the full alloc_size bytes including trailing
uninitialized kmalloc bytes to userspace.
Fix by copying only total_spaces entries (the actually-filled count from
the second pass) instead of alloc_size bytes, and switch to kzalloc so
any future copy size mismatch cannot leak heap data.
Fixes: 7fde62bffb ("Btrfs: buffer results in the space_info ioctl")
CC: stable@vger.kernel.org # 3.0
Signed-off-by: Yochai Eisenrich <echelonh@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ adapted upstream's `return -EFAULT;` to stable's `ret = -EFAULT;` fall-through to existing `out:` cleanup label ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b082694f18 ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230303172041.2103336-83-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 5d6f477d6f ("spi: topcliff-pch: fix controller deregistration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e4ef723d89 ]
Clear the font buffer if the reallocation during console rotation fails
in fbcon_rotate_font(). The putcs implementations for the rotated buffer
will return early in this case. See [1] for an example.
Currently, fbcon_rotate_font() keeps the old buffer, which is too small
for the rotated font. Printing to the rotated console with a high-enough
character code will overflow the font buffer.
v2:
- fix typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 6cc50e1c5b ("[PATCH] fbcon: Console Rotation - Add support to rotate font bitmap")
Cc: stable@vger.kernel.org # v2.6.15+
Link: https://elixir.bootlin.com/linux/v6.19/source/drivers/video/fbdev/core/fbcon_ccw.c#L144 # [1]
Signed-off-by: Helge Deller <deller@gmx.de>
[ renamed `par` to `ops` to match the 6.12 local pointer name ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8f5ce56b76 ]
When the user requests a total hugetlb CMA size without per-node
specification, hugetlb_cma_reserve() computes per_node from
hugetlb_cma_size and the number of nodes that have memory
per_node = DIV_ROUND_UP(hugetlb_cma_size,
nodes_weight(hugetlb_bootmem_nodes));
The reservation loop later computes
size = round_up(min(per_node, hugetlb_cma_size - reserved),
PAGE_SIZE << order);
So the actually reserved per_node size is multiple of (PAGE_SIZE <<
order), but the logged per_node is not rounded up, so it may be smaller
than the actual reserved size.
For example, as the existing comment describes, if a 3 GB area is
requested on a machine with 4 NUMA nodes that have memory, 1 GB is
allocated on the first three nodes, but the printed log is
hugetlb_cma: reserve 3072 MiB, up to 768 MiB per node
Round per_node up to (PAGE_SIZE << order) before logging so that the
printed log always matches the actual reserved size. No functional change
to the actual reservation size, as the following case analysis shows
1. remaining (hugetlb_cma_size - reserved) >= rounded per_node
- AS-IS: min() picks unrounded per_node;
round_up() returns rounded per_node
- TO-BE: min() picks rounded per_node;
round_up() returns rounded per_node (no-op)
2. remaining < unrounded per_node
- AS-IS: min() picks remaining;
round_up() returns round_up(remaining)
- TO-BE: min() picks remaining;
round_up() returns round_up(remaining)
3. unrounded per_node <= remaining < rounded per_node
- AS-IS: min() picks unrounded per_node;
round_up() returns rounded per_node
- TO-BE: min() picks remaining;
round_up() returns round_up(remaining) equals rounded per_node
Link: https://lore.kernel.org/20260422143353.852257-1-ekffu200098@gmail.com
Fixes: cf11e85fc0 ("mm: hugetlb: optionally allocate gigantic hugepages using cma") # 5.7
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ applied the one-line `round_up` to `mm/hugetlb.c` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0245435f77 ]
Make sure to deregister the controller before releasing underlying
resources like DMA during driver unbind.
Note that clocks were also disabled before the recent commit
fdca270f8f ("spi: uniphier: Simplify clock handling with
devm_clk_get_enabled()").
Fixes: 5ba155a4d4 ("spi: add SPI controller driver for UniPhier SoC")
Cc: stable@vger.kernel.org # 4.19
Cc: Keiji Hayashibara <hayashibara.keiji@socionext.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260410081757.503099-25-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ renamed spi_*_controller/host APIs to spi_*_master/master aliases and kept the pre-existing clk_disable_unprepare() after unregister ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ad7310e983 ]
Make sure to deregister the controller before disabling underlying
resources like clocks during driver unbind.
Fixes: f12f7318c4 ("spi: tegra20-sflash: use devm_spi_register_master()")
Cc: stable@vger.kernel.org # 3.13
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260410081757.503099-23-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ renamed spi_controller/host APIs to spi_master/master equivalents and switched devm_spi_register_master to spi_register_master ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9c9c27ff20 ]
Make sure to deregister the controller before disabling underlying
resources like clocks during driver unbind.
Fixes: 5c80964396 ("spi: tegra114: use devm_spi_register_master()")
Cc: stable@vger.kernel.org # 3.13
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260410081757.503099-22-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ renamed spi_controller/host APIs to spi_master/master equivalents and placed spi_master_put() before the existing return 0 in remove ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d874a1c33a ]
Make sure to deregister the controller before disabling underlying
resources like clocks during driver unbind.
Fixes: 3558fe900e ("spi: sunxi: Add Allwinner A31 SPI controller driver")
Cc: stable@vger.kernel.org # 3.15
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260410081757.503099-20-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ renamed spi_controller APIs to spi_master equivalents and kept int return type for sun6i_spi_remove ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c9c012706c ]
Make sure to deregister the controller before disabling it during driver
unbind.
Note that clocks were also disabled before the recent commit
1f8fd9490e ("spi: zynq-qspi: Simplify clock handling with
devm_clk_get_enabled()").
Fixes: 67dca5e580 ("spi: spi-mem: Add support for Zynq QSPI controller")
Cc: stable@vger.kernel.org # 5.2: 8eb2fd00f6
Cc: stable@vger.kernel.org # 5.2
Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260410081757.503099-27-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ kept int-returning remove() with manual clk_disable_unprepare() calls and routed probe error through existing clk_dis_all cascade instead of upstream's remove_ctlr label ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0c18a1bacb ]
Make sure to deregister the controller before disabling underlying
resources like clocks during driver unbind.
Note that the controller is suspended before disabling and releasing
resources since commit 3ac066e222 ("spi: spi-ti-qspi: Suspend the
queue before removing the device") which avoids issues like unclocked
accesses but prevents SPI device drivers from doing I/O during
deregistration.
Fixes: 3b3a80019f ("spi: ti-qspi: one only one interrupt handler")
Cc: stable@vger.kernel.org # 3.13
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260410081757.503099-24-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ renamed spi_controller_* API calls to legacy spi_master_* equivalents and qspi->host to qspi->master ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2f2802d1a5 ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Add an error message to the error path that returned an error before to
replace the core's error message with more information. Apart from the
different wording of the error message, this patch doesn't introduce a
semantic difference.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231105172649.3738556-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 0c18a1bacb ("spi: ti-qspi: fix controller deregistration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 42108a2f03 ]
Make sure to deregister the controller before disabling underlying
resources like clocks during driver unbind.
Fixes: b5f6517948 ("spi: sunxi: Add Allwinner A10 SPI controller driver")
Cc: stable@vger.kernel.org # 3.15
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260410081757.503099-19-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ renamed `host`/`spi_controller` to `master`/`spi_master` and kept `int` return type with `return 0` in remove ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 75d849c345 ]
Make sure to deregister the controller before disabling underlying
resources like clocks during driver unbind.
Fixes: b0823ee35c ("spi: Add spi driver for Socionext SynQuacer platform")
Cc: stable@vger.kernel.org # 5.3
Cc: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260410081757.503099-21-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ renamed spi_controller/host to spi_master/master and kept int return type with `return 0;` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 14acf9652e ]
KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s
hlist_del_rcu calls under syzkaller load on linux-6.12.y stable
(reproduced on 6.12.47, also reachable via the same code path on
torvalds/master and on the ipsec tree). Nine unique signatures cluster
in the xfrm_state lifecycle, the load-bearing one being:
BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline]
BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline]
BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c
Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435
Workqueue: netns cleanup_net
Call Trace:
__hlist_del / hlist_del_rcu
__xfrm_state_delete
xfrm_state_delete
xfrm_state_flush
xfrm_state_fini
ops_exit_list
cleanup_net
The other observed signatures hit the same slab object from
__xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB
write variant of __xfrm_state_delete, all on the byseq/byspi
hash chains.
__xfrm_state_delete() guards its byseq and byspi unhashes with
value-based predicates:
if (x->km.seq)
hlist_del_rcu(&x->byseq);
if (x->id.spi)
hlist_del_rcu(&x->byspi);
while everywhere else in the file (e.g. state_cache, state_cache_input)
the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets
x->id.spi = newspi inside xfrm_state_lock and then immediately inserts
into byspi, but a path that observes x->id.spi != 0 outside of
xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently
with whether x is actually on the list. The same holds for x->km.seq
versus byseq, and the bydst/bysrc unhashes have no predicate at all,
so a second __xfrm_state_delete() on the same object writes through
LIST_POISON pprev.
The defensive change here:
- Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst,
bysrc, byseq and byspi so a second deletion is a no-op rather
than a write through LIST_POISON pprev. The byseq/byspi nodes
are already initialised in xfrm_state_alloc().
- Test hlist_unhashed() rather than the value predicate for
byseq/byspi, so the unhash decision tracks list state rather than
mutable scalar fields.
Empirical verification: applied this patch on top of v6.12.47, rebuilt,
and re-ran the same syzkaller harness for 1h16m on a previously-crashy
configuration that produced ~100 hits each of slab-use-after-free
Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in
__xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at
~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo
confirms the xfrm_state slab is actively allocated and freed during
the run (~143 KiB resident), so the fuzzer is still exercising those
code paths -- they just no longer crash.
Reproduction:
- Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV
- syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db
- 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal
- 9 unique signatures collected in ~9h, all within xfrm_state
lifecycle
Fixes: fe9f1d8779 ("xfrm: add state hashtable keyed by seq")
Fixes: 7b4dc3600e ("[XFRM]: Do not add a state whose SPI is zero to the SPI hash.")
Reported-by: Michal Kosiorek <mkosiorek121@gmail.com>
Tested-by: Michal Kosiorek <mkosiorek121@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michal Kosiorek <mkosiorek121@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
[ dropped state_cache/state_cache_input unhash hunks and xfrm_nat_keepalive_state_updated() call ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ec54093e6a ]
AH allocates its temporary auth/ICV layout differently when ESN is enabled:
the async ahash setup appends a 4-byte seqhi slot before the ICV or
auth_data area, but the async completion callbacks still reconstruct the
temporary layout as if seqhi were absent.
With an async AH implementation selected, that makes AH copy or compare
the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH
with ESN and forced async hmac(sha1), ping fails with 100% packet loss,
and the callback logs show the pre-fix drift:
ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24
ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36
Reconstruct the callback-side layout the same way the setup path built it
by skipping the ESN seqhi slot before locating the saved auth_data or ICV.
Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV
computation, so the async callbacks must account for the seqhi slot.
Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows
the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24
expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o
build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the
change has not been tested against a real async hardware AH engine.
Fixes: d4d573d033 ("{IPv4,xfrm} Add ESN support for AH egress part")
Fixes: d8b2a8600b ("{IPv4,xfrm} Add ESN support for AH ingress part")
Fixes: 26dd70c3fa ("{IPv6,xfrm} Add ESN support for AH egress part")
Fixes: 8d6da6f325 ("{IPv6,xfrm} Add ESN support for AH ingress part")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5-4
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0a6bfaa0e6 ]
Now that the alignmask for ahash and shash algorithms is always 0,
crypto_ahash_alignmask() always returns 0 and will be removed. In
preparation for this, stop checking crypto_ahash_alignmask() in ah6.c.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: ec54093e6a ("xfrm: ah: account for ESN high bits in async callbacks")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e77f5dd701 ]
Now that the alignmask for ahash and shash algorithms is always 0,
crypto_ahash_alignmask() always returns 0 and will be removed. In
preparation for this, stop checking crypto_ahash_alignmask() in ah4.c.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: ec54093e6a ("xfrm: ah: account for ESN high bits in async callbacks")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aad35f9c92 ]
The Linux Version Code is currently written to the GUID register before
PHY initialization. Certain PHY implementations (such as Synopsys eUSB
PHY performing link_sw_reset) clear the GUID register to its default
value during initialization, causing the kernel version information to
be lost.
Move the GUID register programming to occur after PHY initialization
completes to ensure the Linux version information persists.
Fixes: fa0ea13e9f ("usb: dwc3: core: write LINUX_VERSION_CODE to our GUID register")
Cc: stable <stable@kernel.org>
Reported-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260417063314.2359-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ adapted dwc3_writel(dwc, ...) to dwc3_writel(dwc->regs, ...) ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c623b63580 ]
Watchdog task might end between send_sig() and kthread_stop() calls, what
results in the use-after-free issue. Fix this by increasing watchdog task
reference count before calling send_sig() and dropping it by switching to
kthread_stop_put().
Cc: stable@vger.kernel.org
Fixes: 373c83a801 ("brcmfmac: stop watchdog before detach and free everything")
Fixes: a9ffda88be ("brcm80211: fmac: abstract bus_stop interface function pointer")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260416093339.2066829-1-m.szyprowski@samsung.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[ replaced kthread_stop_put() with open-coded kthread_stop() + put_task_struct() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a8cf16556 upstream.
build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a
server-supplied dacloffset and then use the incoming ACL to rebuild the
chmod/chown security descriptor.
The original fix only checked that the struct smb_acl header fits before
reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate
header-field OOB read, but the rewrite helpers still walk ACEs based on
pdacl->num_aces with no structural validation of the incoming DACL body.
A malicious server can return a truncated DACL that still contains a
header, claims one or more ACEs, and then drive
replace_sids_and_copy_aces() or set_chmod_dacl() past the validated
extent while they compare or copy attacker-controlled ACEs.
Factor the DACL structural checks into validate_dacl(), extend them to
validate each ACE against the DACL bounds, and use the shared validator
before the chmod/chown rebuild paths. parse_dacl() reuses the same
validator so the read-side parser and write-side rewrite paths agree on
what constitutes a well-formed incoming DACL.
Fixes: bc3e9dd9d1 ("cifs: Change SIDs in ACEs while transferring file ownership.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[ renamed smb_acl/smb_ace/smb_sid/smb_ntsd to cifs_* and widened num_aces from u16 to u32 for 6.1's __le32 field ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
