Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
tmpfs only requires the FS_MGTIME flag.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-10-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot metadata updates, down to around 1 per jiffy,
even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache. Even with NFSv4, a lot of
exported filesystems don't properly support a change attribute and are
subject to the same problems with timestamp granularity. Other
applications have similar issues with timestamps (e.g backup
applications).
If we were to always use fine-grained timestamps, that would improve the
situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
What we need is a way to only use fine-grained timestamps when they are
being actively queried.
POSIX generally mandates that when the the mtime changes, the ctime must
also change. The kernel always stores normalized ctime values, so only
the first 30 bits of the tv_nsec field are ever used.
Use the 31st bit of the ctime tv_nsec field to indicate that something
has queried the inode for the mtime or ctime. When this flag is set,
on the next mtime or ctime update, the kernel will fetch a fine-grained
timestamp instead of the usual coarse-grained one.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Later patches will convert individual filesystems to use the new
infrastructure.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-9-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now that all of the update_time operations are prepared for it, we can
drop the timespec64 argument from the update_time operation. Do that and
remove it from some associated functions like inode_update_time and
inode_needs_update_time.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-8-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches we're going to drop the "now" parameter from the
update_time operation. Prepare XFS for this by reworking how it fetches
timestamps and sets them in the inode. Ensure that we update the ctime
even if only S_MTIME is set.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-7-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to drop the "now" parameter from the
update_time operation. Fix fat_update_time to fetch its own timestamp.
It turns out that this is easily done by just passing a NULL timestamp
pointer to fat_truncate_time.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Frank Sorenson <sorenson@redhat.com>
Message-Id: <20230810-ctime-fat-v1-2-327598fd1de8@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
commit 6bb885ecd7 (fat: add functions to update and truncate
timestamps appropriately") added an update_time routine for fat. That
patch added a section for handling the S_VERSION bit, even though FAT
doesn't enable SB_I_VERSION and the S_VERSION bit will never be set when
calling it.
Remove the section for handling S_VERSION since it's effectively dead
code, and will be problematic vs. future changes.
Cc: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Frank Sorenson <sorenson@redhat.com>
Message-Id: <20230810-ctime-fat-v1-1-327598fd1de8@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to drop the "now" parameter from the
update_time operation. Prepare ubifs for this, by having it use the new
inode_update_timestamps helper.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-6-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The IDA-based allocation is useful to simplify debug, but it was also
introduced as a prerequisite to deal with the Intel Lunar Lake
hardware programming sequences: the wake-ups have to be handled with a
system-unique SDI address at the HDaudio controller level.
At the time, the restriction introduced by the IDA to 8 devices total
seemed perfectly fine, but recently hardware vendors created
configurations with more than 8 devices.
Add a new allocation strategy to allow for more than 8 devices using
information on the type of devices, and only use the IDA-based
allocation for devices capable of generating a wake.
In theory the information on wake capabilities should come from
firmware, but none of the existing ACPI tables provide it. The drivers
set the 'wake_capable' property, but this cannot be used reliably: if
the driver probe happens *after* the enumeration, then that property
is not initialized yet. Trying to modify the device_number on-the-fly
proved to be an impossible task generating race conditions left and
right.
The only reliable work-around to control the enumeration is to add a
quirk table. It's ugly but until platform firmware improves, hopefully as a
result of MIPI/SDCA stardization, we can expect that quirk table to
grow for each new headset or microphone codec.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731091333.3593132-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Rather than add logic in the core for vendor-specific usages, add
callbacks for vendor-specific device_number allocation and release.
This patch only moves the existing IDA-based allocator used only by
Intel to the intel_auxdevice.c file and does not change the
functionality. Follow-up patches will extend the behavior by modifying
the Intel callbacks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731091333.3593132-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The parameters are only the bus and the device number, manager ops may
need additional details on the type of peripheral connected, such as
whether it is wake-capable or not.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731091333.3593132-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SoundWire bus is handled with a dedicated device, which is placed
between the Intel auxiliary device and peripheral devices, e.g.
soundwire_intel.link.0/sdw-master-0/sdw:0:025d:0711:01
The functionality of this 'sdw-master' device is limited, specifically
for pm_runtime the ASoC framework will not rely on
pm_runtime_get_sync() since it does not register any components. It
will only change status thanks to the parent-child relationship which
guarantees that the 'sdw-master' device will be pm_runtime resumed
before any peripheral device.
However on startup and system resume it's possible that only the
auxiliary device is pm_runtime active, and the peripheral will only
become active during its io_init routine, leading to another
occurrence of the error reported by the pm_runtime framework:
rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active
This patch suggests aligning the sdw-master device status to that of
the auxiliary device. The difference between the two is completely
notional and their pm_status shouldn't be different during the startup
and system resume steps.
This problem was exposed by recent changes in the timing of the bus
reset, but was present in this driver since we introduced pm_runtime
support.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803065220.3823269-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As soon as the bus starts, physical peripheral devices may report as
ATTACHED and set their status with pm_runtime_set_active() in their
update_status()/io_init().
This is problematic with the existing code, since the parent
pm_runtime status is changed to "active" after starting the bus. This
creates a time window where the pm_runtime framework can report an
issue, e.g.
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This patch enables runtime_pm earlier to make sure the auxiliary
device is pm_runtime active after powering-up, but before starting the
bus.
This problem was exposed by recent changes in the timing of the bus
reset, but was present in this driver since we introduced pm_runtime
support.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803065220.3823269-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The previous function amd_get_highest_perf() will be deprecated.
It can only return 166 or 255 by cpuinfo. For platforms that
support preferred core, the value of highest perf can be between
166 and 255. Therefore, it will cause amd-pstate-ut to fail when
run amd_pstate_ut_check_perf().
Signed-off-by: Meng Li <li.meng@amd.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In GCC 14, last_stmt() was renamed to last_nondebug_stmt(). Add a helper
macro to handle the renaming.
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tests that were expecting a signal were not correctly checking for a
SKIP condition. Move the check before the signal checking when
processing test result.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Fixes: 9847d24af9 ("selftests/harness: Refactor XFAIL into SKIP")
Signed-off-by: Kees Cook <keescook@chromium.org>
If netdev_mc_count() is not zero and not IFF_ALLMULTI, filter
incoming multicast packets. The chip has a Multicast Address Hash Table
for allowed multicast addresses, so we fill it.
Implement .ndo_set_rx_mode and recalculate multicast hash table. Also
observe change of IFF_PROMISC and IFF_ALLMULTI netdev flags.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Optimise the negative xattr lookup with bloom filter.
The bit value for the bloom filter map has a reverse semantics for
compatibility. That is, the bit value of 0 indicates existence, while
the bit value of 1 indicates the absence of corresponding xattr.
The initial version is _only_ enabled when xattr_filter_reserved is
zero. The filter map internals may change in the future, in which case
the reserved flag will be set non-zero and we don't need bothering the
compatible bits again at that time. For now disable the optimization if
this reserved flag is non-zero.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230722094538.11754-3-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The xattr name bloom filter feature is going to be introduced to speed
up the negative xattr lookup, e.g. system.posix_acl_[access|default]
lookup when running "ls -lR" workload.
There are some commonly used extended attributes (n) and the total
number of these is approximately 30.
trusted.overlay.opaque
trusted.overlay.redirect
trusted.overlay.origin
trusted.overlay.impure
trusted.overlay.nlink
trusted.overlay.upper
trusted.overlay.metacopy
trusted.overlay.protattr
user.overlay.opaque
user.overlay.redirect
user.overlay.origin
user.overlay.impure
user.overlay.nlink
user.overlay.upper
user.overlay.metacopy
user.overlay.protattr
security.evm
security.ima
security.selinux
security.SMACK64
security.SMACK64IPIN
security.SMACK64IPOUT
security.SMACK64EXEC
security.SMACK64TRANSMUTE
security.SMACK64MMAP
security.apparmor
security.capability
system.posix_acl_access
system.posix_acl_default
user.mime_type
Given the number of bits of the bloom filter (m) is 32, the optimal
value for the number of the hash functions (k) is 1 (ln2 * m/n = 0.74).
The single hash function is implemented as:
xxh32(name, strlen(name), EROFS_XATTR_FILTER_SEED + index)
where `index` represents the index of corresponding predefined short name
prefix, while `name` represents the name string after stripping the above
predefined name prefix.
The constant magic number EROFS_XATTR_FILTER_SEED, i.e. 0x25BBE08F, is
used to give a better spread when mapping these 30 extended attributes
into 32-bit bloom filter as:
bit 0: security.ima
bit 1:
bit 2: trusted.overlay.nlink
bit 3:
bit 4: user.overlay.nlink
bit 5: trusted.overlay.upper
bit 6: user.overlay.origin
bit 7: trusted.overlay.protattr
bit 8: security.apparmor
bit 9: user.overlay.protattr
bit 10: user.overlay.opaque
bit 11: security.selinux
bit 12: security.SMACK64TRANSMUTE
bit 13: security.SMACK64
bit 14: security.SMACK64MMAP
bit 15: user.overlay.impure
bit 16: security.SMACK64IPIN
bit 17: trusted.overlay.redirect
bit 18: trusted.overlay.origin
bit 19: security.SMACK64IPOUT
bit 20: trusted.overlay.opaque
bit 21: system.posix_acl_default
bit 22:
bit 23: user.mime_type
bit 24: trusted.overlay.impure
bit 25: security.SMACK64EXEC
bit 26: user.overlay.redirect
bit 27: user.overlay.upper
bit 28: security.evm
bit 29: security.capability
bit 30: system.posix_acl_access
bit 31: trusted.overlay.metacopy, user.overlay.metacopy
h_name_filter is introduced to the on-disk per-inode xattr header to
place the corresponding xattr name filter, where bit value 1 indicates
non-existence for compatibility.
This feature is indicated by EROFS_FEATURE_COMPAT_XATTR_FILTER
compatible feature bit.
Reserve one byte in on-disk superblock as the on-disk format for xattr
name filter may change in the future. With this flag we don't need
bothering these compatible bits again at that time.
Suggested-by: Alexander Larsson <alexl@redhat.com>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230722094538.11754-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Add DEFLATE compression as the 3rd supported algorithm.
DEFLATE is a popular generic-purpose compression algorithm for quite
long time (many advanced formats like gzip, zlib, zip, png are all
based on that) as Apple documentation written "If you require
interoperability with non-Apple devices, use COMPRESSION_ZLIB. [1]".
Due to its popularity, there are several hardware on-market DEFLATE
accelerators, such as (s390) DFLTCC, (Intel) IAA/QAT, (HiSilicon) ZIP
accelerator, etc. In addition, there are also several high-performence
IP cores and even open-source FPGA approches available for DEFLATE.
Therefore, it's useful to support DEFLATE compression in order to find
a way to utilize these accelerators for asynchronous I/Os and get
benefits from these later.
Besides, it's a good choice to trade off between compression ratios
and performance compared to LZ4 and LZMA. The DEFLATE core format is
simple as well as easy to understand, therefore the code size of its
decompressor is small even for the bootloader use cases. The runtime
memory consumption is quite limited too (e.g. 32K + ~7K for each zlib
stream). As usual, EROFS ourperforms similar approaches too.
Alternatively, DEFLATE could still be used for some specific files
since EROFS supports multiple compression algorithms in one image.
[1] https://developer.apple.com/documentation/compression/compression_algorithm
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230810154859.118330-1-hsiangkao@linux.alibaba.com
Correct spelling problems as identified by codespell.
Correct one grammar error.
Fixes: 9a93de620e ("docs: ABI: testing: Document the SBEFIFO timeout interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eddie James <eajames@linux.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230710052305.29611-1-rdunlap@infradead.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
The I2CR has the capability to directly perform SCOM operations,
circumventing the need to drive the FSI2PIB engine. Add a new
driver to perform SCOM operations through the I2CR.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230612195657.245125-15-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The I2C Responder (I2CR) is an I2C device that translates I2C commands
to CFAM or SCOM operations, effectively implementing an FSI master and
bus.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230612195657.245125-14-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The I2C Responder translates I2C commands to CFAM or SCOM operations,
effectively implementing an FSI master.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230612195657.245125-13-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Because master device registration may cause hub master scans, or
user scans may begin before device registration has ended, so the
master scan lock must be held while registering the device.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230809180814.151984-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Master indexing is problematic if a hub is rescanned while the
root master is being rescanned. Always allocate an index for the
FSI master, and set the device name if it hasn't already been set.
Move the call to ida_free to the bottom of master unregistration
and set the number of links to 0 in case another call to scan
comes in before the device is removed.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230809180814.151984-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
to reduce the log level of rockchip, a power state fix for the it6505
bridge, a timing fix for the lt9611 bridge, a cache maintenance fix for
ivpu and one to reset vma->vm_ops on mmap for shmem-helper.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZNSJGAAKCRDj7w1vZxhR
xRFgAQDA3tLyItU/xoh1RcwBXS4YjqA6357uh1/atYg65juGogEArrrUWQtDArZj
3AgmsDfwyUC/LOmPpnQ8+ePRw5WUjwE=
=Yoaj
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2023-08-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Multiple fixes for nouveau around memory safety and DisplayPort, one fix
to reduce the log level of rockchip, a power state fix for the it6505
bridge, a timing fix for the lt9611 bridge, a cache maintenance fix for
ivpu and one to reset vma->vm_ops on mmap for shmem-helper.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fwed6gzdtkse5ocrgd37elhyw7qirfptsvfp5mqqverdzifhxj@4da3vesxcqp2
Cleanup the warnings:
arch/csky/kernel/ptrace.c:320:16: error: no previous prototype for 'syscall_trace_enter' [-Werror=missing-prototypes]
arch/csky/kernel/ptrace.c:336:17: error: no previous prototype for 'syscall_trace_exit' [-Werror=missing-prototypes]
arch/csky/kernel/setup.c:116:34: error: no previous prototype for 'csky_start' [-Werror=missing-prototypes]
arch/csky/kernel/signal.c:255:17: error: no previous prototype for 'do_notify_resume' [-Werror=missing-prototypes]
arch/csky/kernel/traps.c:150:15: error: no previous prototype for 'do_trap_unknown' [-Werror=missing-prototypes]
arch/csky/kernel/traps.c:152:15: error: no previous prototype for 'do_trap_zdiv' [-Werror=missing-prototypes]
arch/csky/kernel/traps.c:154:15: error: no previous prototype for 'do_trap_buserr' [-Werror=missing-prototypes]
arch/csky/kernel/traps.c:157:17: error: no previous prototype for 'do_trap_misaligned' [-Werror=missing-prototypes]
arch/csky/kernel/traps.c:168:17: error: no previous prototype for 'do_trap_bkpt' [-Werror=missing-prototypes]
arch/csky/kernel/traps.c:187:17: error: no previous prototype for 'do_trap_illinsn' [-Werror=missing-prototypes]
arch/csky/kernel/traps.c:210:17: error: no previous prototype for 'do_trap_fpe' [-Werror=missing-prototypes]
arch/csky/kernel/traps.c:220:17: error: no previous prototype for 'do_trap_priv' [-Werror=missing-prototypes]
arch/csky/kernel/traps.c:230:17: error: no previous prototype for 'trap_c' [-Werror=missing-prototypes]
arch/csky/kernel/traps.c:57:13: error: no previous prototype for 'trap_init' [-Werror=missing-prototypes]
arch/csky/kernel/vdso/vgettimeofday.c:12:5: error: no previous prototype for '__vdso_clock_gettime64' [-Werror=missing-prototypes]
arch/csky/kernel/vdso/vgettimeofday.c:18:5: error: no previous prototype for '__vdso_gettimeofday' [-Werror=missing-prototypes]
arch/csky/kernel/vdso/vgettimeofday.c:24:5: error: no previous prototype for '__vdso_clock_getres' [-Werror=missing-prototypes]
arch/csky/kernel/vdso/vgettimeofday.c:6:5: error: no previous prototype for '__vdso_clock_gettime' [-Werror=missing-prototypes]
arch/csky/mm/fault.c:187:17: error: no previous prototype for 'do_page_fault' [-Werror=missing-prototypes]
Link: https://lore.kernel.org/lkml/20230810141947.1236730-17-arnd@kernel.org/
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
When gso.hdr_len is zero and a packet is transmitted via write() or
writev(), all payload is treated as header which requires a contiguous
memory allocation. This allocation request is harder to satisfy, and may
even fail if there is enough fragmentation.
Note that sendmsg() code path limits the linear copy length, so this change
makes write()/writev() and sendmsg() paths more consistent.
Signed-off-by: Tahsin Erdogan <trdgn@amazon.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230809164753.2247594-1-trdgn@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver init/exit() function don't do anything special, it
can use the module_pci_driver() macro to eliminate boilerplate
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230810014633.3084355-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 61c9fed416 ("[SCTP]: A better solution to fix the race between sctp_peeloff()
and sctp_rcv().") removed the implementation but left declaration in place. Remove it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230809142323.9428-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
For symmetry to the same thing with pfn_to_virt().
In order to do this we move the virt_to_phys() and
phys_to_virt() below the definitions of the __pa()
and __va() macros so it compiles. The macro version was also
able to do recursive symbol resolution.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
The virt_to_pfn() function takes a (void *) as argument, fix
this up to avoid exploiting the unintended polymorphism of
virt_to_pfn.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
The final icache_flush was in the update_mmu_cache, and update_mmu_cache
is after the set_pte_at. Thus, when CPU0 sets the pte, the other CPU
would see it before the icache_flush broadcast happens, and their
icaches may have cached stale VIPT cache lines in their I-caches. When
address translation was ready for the new cache line, they will use the
stale data of icache, not the fresh one of the dcache.
The csky instruction cache is VIPT, and it needs an origin virtual
address to invalidate the virtual address index entries of cache ways.
The current implementation uses a temporary mapping mechanism -
kmap_atomic, which returns a new virtual address for invalidation. But,
the original virtual address cache line may still in the I-cache.
So force invalidation I-cache in update_mmu_cache, and prevent
flush_dcache when there is an EXEC page. This bug was detected in the
4*c860 SMP system, and this patch could pass the stress test.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
With deferred close we can have closes that race with lease breaks,
and so with the current checks for whether to send the lease response,
oplock_response(), this can mean that an unmount (kill_sb) can occur
just before we were checking if the tcon->ses is valid. See below:
[Fri Aug 4 04:12:50 2023] RIP: 0010:cifs_oplock_break+0x1f7/0x5b0 [cifs]
[Fri Aug 4 04:12:50 2023] Code: 7d a8 48 8b 7d c0 c0 e9 02 48 89 45 b8 41 89 cf e8 3e f5 ff ff 4c 89 f7 41 83 e7 01 e8 82 b3 03 f2 49 8b 45 50 48 85 c0 74 5e <48> 83 78 60 00 74 57 45 84 ff 75 52 48 8b 43 98 48 83 eb 68 48 39
[Fri Aug 4 04:12:50 2023] RSP: 0018:ffffb30607ddbdf8 EFLAGS: 00010206
[Fri Aug 4 04:12:50 2023] RAX: 632d223d32612022 RBX: ffff97136944b1e0 RCX: 0000000080100009
[Fri Aug 4 04:12:50 2023] RDX: 0000000000000001 RSI: 0000000080100009 RDI: ffff97136944b188
[Fri Aug 4 04:12:50 2023] RBP: ffffb30607ddbe58 R08: 0000000000000001 R09: ffffffffc08e0900
[Fri Aug 4 04:12:50 2023] R10: 0000000000000001 R11: 000000000000000f R12: ffff97136944b138
[Fri Aug 4 04:12:50 2023] R13: ffff97149147c000 R14: ffff97136944b188 R15: 0000000000000000
[Fri Aug 4 04:12:50 2023] FS: 0000000000000000(0000) GS:ffff9714f7c00000(0000) knlGS:0000000000000000
[Fri Aug 4 04:12:50 2023] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[Fri Aug 4 04:12:50 2023] CR2: 00007fd8de9c7590 CR3: 000000011228e000 CR4: 0000000000350ef0
[Fri Aug 4 04:12:50 2023] Call Trace:
[Fri Aug 4 04:12:50 2023] <TASK>
[Fri Aug 4 04:12:50 2023] process_one_work+0x225/0x3d0
[Fri Aug 4 04:12:50 2023] worker_thread+0x4d/0x3e0
[Fri Aug 4 04:12:50 2023] ? process_one_work+0x3d0/0x3d0
[Fri Aug 4 04:12:50 2023] kthread+0x12a/0x150
[Fri Aug 4 04:12:50 2023] ? set_kthread_struct+0x50/0x50
[Fri Aug 4 04:12:50 2023] ret_from_fork+0x22/0x30
[Fri Aug 4 04:12:50 2023] </TASK>
To fix this change the ordering of the checks before sending the oplock_response
to first check if the openFileList is empty.
Fixes: da787d5b74 ("SMB3: Do not send lease break acknowledgment if all file handles have been closed")
Suggested-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 43e3692101 ("caif: Move refcount from service layer to sock and dev.")
declared but never implemented this.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809134943.37844-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross merge x86 fixes to fix clang linking errors:
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:221: at least one side of the expression must be absolute
These will hopefully be downstream by the time we ship
the next batch of fixes.
* 'x86/bugs' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Move gds_ucode_mitigated() declaration to header
x86/speculation: Add cpu_show_gds() prototype
driver core: cpu: Make cpu_show_not_affected() static
x86/srso: Fix build breakage with the LLVM linker
Documentation/srso: Document IBPB aspect and fix formatting
driver core: cpu: Unify redundant silly stubs
Documentation/hw-vuln: Unify filename specification in index
Link: https://lore.kernel.org/all/CAHk-=wj_b+FGTnevQSBAtCWuhCk=0oQ_THvthBW2hzqpOTLFmg@mail.gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix a possible null pointer dereference issue in
exynos_drm_crtc_atomic_disable(), which was reported by
the automatic static analysis tool. And below is a relevant link,
https://sites.google.com/view/basscheck/home
Cleanup
- drop the use of of_match_ptr which is redundant.
-----BEGIN PGP SIGNATURE-----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=ZP22
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Fixup
- fix a possible null pointer dereference issue in
exynos_drm_crtc_atomic_disable(), which was reported by
the automatic static analysis tool. And below is a relevant link,
https://sites.google.com/view/basscheck/home
Cleanup
- drop the use of of_match_ptr which is redundant.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809060216.374042-1-inki.dae@samsung.com
DYNAMIC_POWER does not seem to be used anywhere in the tree, remove it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Andrew Lunn says:
====================
Support offload LED blinking to PHY.
Allow offloading of the LED trigger netdev to PHY drivers and
implement it for the Marvell PHY driver. Additionally, correct the
handling of when the initial state of the LED cannot be represented by
the trigger, and so an error is returned. As with ledtrig-timer,
disable offload when the trigger is deactivate, or replaced by another
trigger.
====================
Link: https://lore.kernel.org/r/20230808210436.838995-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensure that the offloading of blinking is stopped when the trigger is
deactivated. Calling led_set_brightness() is documented as stopping
offload and setting the LED to a constant brightness.
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-5-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the code needed to indicate if a given blinking pattern can be
offloaded, to offload a pattern and to try to return the current
pattern.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-4-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linux LEDs can be requested to perform hardware accelerated blinking
to indicate link, RX, TX etc. Pass the rules for blinking to the PHY
driver, if it implements the ops needed to determine if a given
pattern can be offloaded, to offload it, and what the current offload
is. Additionally implement the op needed to get what device the LED is
for.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-3-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the netdev trigger is activates, it tries to determine what
device the LED blinks for, and what the current blink mode is.
The documentation for hw_control_get() says:
* Return 0 on success, a negative error number on failing parsing the
* initial mode. Error from this function is NOT FATAL as the device
* may be in a not supported initial state by the attached LED trigger.
*/
For the Marvell PHY and the Armada 370-rd board, the initial LED blink
mode is not supported by the trigger, so it returns an error. This
resulted in not getting the device the LED is blinking for. As a
result, the device is unknown and offloaded is never performed.
Change to condition to always get the device if offloading is
supported, and reduce the scope of testing for an error from
hw_control_get() to skip setting trigger internal state if there is an
error.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-2-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
