The module_mhi_driver() will set "THIS_MODULE" to driver.owner when
register a mhi_driver driver, so it is redundant initialization to set
driver.owner in the statement. Remove it for clean code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230808021238.2975585-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using a fixed-link setup, certain devices like the SJA1105 require a
small pause in the TXC clock line to enable their internal tunable
delay line (TDL).
To satisfy this requirement, this patch temporarily disables the TX clock,
and restarts it after a required period. This provides the required
silent interval on the clock line for SJA1105 to complete the frequency
transition and enable the internal TDLs. This action occurs before the link
is built up, so it does not impact a normal device too. There is no
need to identify if the connected device is an SJA1105 alike or not during
the implementation.
So far we have only enabled this feature on the i.MX93 platform.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Frank Li <frank.li@nxp.com>
Link: https://lore.kernel.org/r/20230807160716.259072-3-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A mode parameter has been added to the callback function of fix_mac_speed
to indicate the physical layer type.
The mode can be one the following:
MLO_AN_PHY - Conventional PHY
MLO_AN_FIXED - Fixed-link mode
MLO_AN_INBAND - In-band protocol
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20230807160716.259072-2-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Null-checking state suggests that it may be null, but it has already
been dereferenced on drm_atomic_get_new_plane_state(state, plane).
The parameter state will never be NULL currently, so just remove the
state is NULL flow in this function.
Fixes: 5ddb0bd4dd ("drm/atomic: Pass the full state to planes async atomic check and update")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230714094908.13087-5-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
CERT-C Characters and Strings (CERT STR31-C)
all_drm_priv[cnt] evaluates to an address that could be at negative
offset of an array.
In mtk_drm_get_all_drm_priv():
Guarantee that storage for strings has sufficient space for character
data and the null terminator.
So change cnt to unsigned int and check its max value.
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230714094908.13087-3-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Fixing the coverity issue of:
mtk_drm_cmdq_pkt_destroy frees address of mtk_crtc->cmdq_handle
So remove the free function.
Fixes: 7627122fd1 ("drm/mediatek: Add cmdq_handle in mtk_crtc")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230714094908.13087-2-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the mediatek drm drivers from always returning zero in
the remove callback to the void returning variant.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230801110239.831099-8-u.kleine-koenig@pengutronix.de/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
A previous commit added a lockdep annotation, but botched it. Use the
right type.
Fixes: 4eb44d1076 ("block: remove init_mutex and open-code blk_iolatency_try_init")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It was noticed that if the very first 'stealing' request failed to
create for some reason then the 'steal all ids' loop would immediately
exit with 'last' still being NULL. The test would attempt to continue
but using a null pointer. Fix that by aborting the test if it fails to
create any requests at all.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802184940.911753-1-John.C.Harrison@Intel.com
C6x DSP nodes defined in the top-level J721e SoC dtsi files are incomplete
and will not be functional unless they are extended with both mboxes and
memory-region information.
As theses only known about at the board integration level, these nodes
should only be enabled when provided with this information.
Disable the C6x DSP nodes in the dtsi files and only enable the ones that
are given the required mboxes and memory-region on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Hari Nagalla <hnagalla@ti.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230809180145.53158-3-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
C7x DSP nodes defined in the top-level J784s4 SoC dtsi files are incomplete
and will not be functional unless they are extended with both mboxes and
memory-region information.
As theses only known about at the board integration level, these nodes
should only be enabled when provided with this information.
Disable the C7x DSP nodes in the dtsi files and only enable the ones that
are given the required mboxes and memory-region on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Hari Nagalla <hnagalla@ti.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230809180145.53158-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
C7x DSP nodes defined in the top-level J721e SoC dtsi files are incomplete
and will not be functional unless they are extended with both mboxes and
memory-region information.
As theses only known about at the board integration level, these nodes
should only be enabled when provided with this information.
Disable the C7x DSP nodes in the dtsi files and only enable the ones that
are given the required mboxes and memory-region on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Hari Nagalla <hnagalla@ti.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230809180145.53158-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Fix these fss node warnings that dtbs_check throws:
fss@47000000: $nodename:0: 'fss@47000000' does not match
'^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
By renaming fss to bus.
Cc: Nishant Menon <nm@ti.com>
Suggested-by: Andrew Davis <afd@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Reid Tonking <reidt@ti.com>
Link: https://lore.kernel.org/r/20230810081847.277094-1-d-gole@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRdM/uy1Ege0+EN1fNar9k/UBDW4wUCZNRx8QAKCRBar9k/UBDW
46MBAQC3YDFsEfPzX4P7ZnlM5Lf1NynjNbso5bYW0TF/dp/Y+gD+M8wdM5Vj2Mb0
Zr56TnwCJei0kGBemiel4sStt3e4qwY=
=+0u+
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2023-08-09
We've added 19 non-merge commits during the last 6 day(s) which contain
a total of 25 files changed, 369 insertions(+), 141 deletions(-).
The main changes are:
1) Fix array-index-out-of-bounds access when detaching from an
already empty mprog entry from Daniel Borkmann.
2) Adjust bpf selftest because of a recent llvm change
related to the cpu-v4 ISA from Eduard Zingerman.
3) Add uprobe support for the bpf_get_func_ip helper from Jiri Olsa.
4) Fix a KASAN splat due to the kernel incorrectly accepted
an invalid program using the recent cpu-v4 instruction from
Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf: btf: Remove two unused function declarations
bpf: lru: Remove unused declaration bpf_lru_promote()
selftests/bpf: relax expected log messages to allow emitting BPF_ST
selftests/bpf: remove duplicated functions
bpf, docs: Fix small typo and define semantics of sign extension
selftests/bpf: Add bpf_get_func_ip test for uprobe inside function
selftests/bpf: Add bpf_get_func_ip tests for uprobe on function entry
bpf: Add support for bpf_get_func_ip helper for uprobe program
selftests/bpf: Add a movsx selftest for sign-extension of R10
bpf: Fix an incorrect verification success with movsx insn
bpf, docs: Formalize type notation and function semantics in ISA standard
bpf: change bpf_alu_sign_string and bpf_movsx_string to static
libbpf: Use local includes inside the library
bpf: fix bpf_dynptr_slice() to stop return an ERR_PTR.
bpf: fix inconsistent return types of bpf_xdp_copy_buf().
selftests/bpf: fix the incorrect verification of port numbers.
selftests/bpf: Add test for detachment on empty mprog entry
bpf: Fix mprog detachment for empty mprog entry
bpf: bpf_struct_ops: Remove unnecessary initial values of variables
====================
Link: https://lore.kernel.org/r/20230810055123.109578-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We never use io_move_task_work_from_local() before it's defined in the
file anyway, so kill the forward declaration.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The Main supply volatge for Edgeble Neu2 IO board is 12V DC.
Add the 12v supply regulator for it and input to vcc5v0_sys.
Since the power regulator is part of IO board circuit, move the
regulator in IO dts file.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230731103518.2906147-14-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
EMMC_RSTN GPIO1_A3 is connected to FSPI_CLK in Edgeble Neu2
board.
So, drop the same GPIO pin from eMMC.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230731103518.2906147-11-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
With commit c1177979af ("btf, scripts: Exclude Rust CUs with pahole")
we are now able to use pahole directly to identify Rust compilation
units (CUs) and exclude them from generating BTF debugging information
(when DEBUG_INFO_BTF is enabled).
And if pahole doesn't support the --lang-exclude flag, we can't enable
both RUST and DEBUG_INFO_BTF at the same time.
So, in any case, the script is_rust_module.sh is just redundant and we
can drop it.
NOTE: we may also be able to drop the "Rust loadable module" mark
inside Rust modules, but it seems safer to keep it for now to make sure
we are not breaking any external tool that may potentially rely on it.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/20230704052136.155445-1-andrea.righi@canonical.com
[ Picked the `Reviewed-by`s from the old patch too. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This macro provides a flexible way to concatenated identifiers together
and it allows the resulting identifier to be used to declare new items,
which `concat_idents!` does not allow. It also allows identifiers to be
transformed before concatenated.
The `concat_idents!` example
let x_1 = 42;
let x_2 = concat_idents!(x, _1);
assert!(x_1 == x_2);
can be written with `paste!` macro like this:
let x_1 = 42;
let x_2 = paste!([<x _1>]);
assert!(x_1 == x_2);
However `paste!` macro is more flexible because it can be used to create
a new variable:
let x_1 = 42;
paste!(let [<x _2>] = [<x _1>];);
assert!(x_1 == x_2);
While this is not possible with `concat_idents!`.
This macro is similar to the `paste!` crate [1], but this is a fresh
implementation to avoid vendoring large amount of code directly. Also, I
have augmented it to provide a way to specify span of the resulting
token, allowing precise control.
For example, this code is broken because the variable is declared inside
the macro, so Rust macro hygiene rules prevents access from the outside:
macro_rules! m {
($id: ident) => {
// The resulting token has hygiene of the macro.
paste!(let [<$id>] = 1;)
}
}
m!(a);
let _ = a;
In this version of `paste!` macro I added a `span` modifier to allow
this:
macro_rules! m {
($id: ident) => {
// The resulting token has hygiene of `$id`.
paste!(let [<$id:span>] = 1;)
}
}
m!(a);
let _ = a;
Link: http://docs.rs/paste/ [1]
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230628171108.1150742-1-gary@garyguo.net
[ Added SPDX license identifier as discussed in the list and fixed typo. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
It turns out arm32 doesn't handle syscall -1 gracefully, so skip testing
for that. Additionally skip tests that depend on clone3 when it is not
available (for example when building the seccomp selftests on an old arm
image without clone3 headers). And improve error reporting for when
nanosleep fails, as seen on arm32 since v5.15.
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
This was not strictly necessary, as page unpinning (ie. shrinker) only
cares about the resv. It did give us some extra sanity checking for
userspace controlled iova, and was useful to catch issues on kernel and
userspace side when enabling userspace iova. But if userspace screws
this up, it just corrupts it's own gpu buffers and/or gets iova faults.
So we can just let userspace shoot it's own foot and drop the extra per-
buffer SUBMIT overhead.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Patchwork: https://patchwork.freedesktop.org/patch/551023/
Split out pin_count incrementing and lru updating into a separate loop
so we can take the lru lock only once for all objs. Since we are still
holding the obj lock, it is safe to split this up.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/551025/
If we repeatedly fail to fake offline memory to unplug it, we won't be
sending any unplug requests to the device. However, we only check if the
config changed when sending such (un)plug requests.
We could end up trying for a long time to unplug memory, even though
the config changed already and we're not supposed to unplug memory
anymore. For example, the hypervisor might detect a low-memory situation
while unplugging memory and decide to replug some memory. Continuing
trying to unplug memory in that case can be problematic.
So let's check on a more regular basis.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-5-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case offline_and_remove_memory() fails in SBM, we leave a completely
unplugged Linux memory block stick around until we try plugging memory
again. We won't try removing that memory block again.
offline_and_remove_memory() may, for example, fail if we're racing with
another alloc_contig_range() user, if allocating temporary memory fails,
or if some memory notifier rejected the offlining request.
Let's handle that case better, by simple retrying to offline and remove
such memory.
Tested using CONFIG_MEMORY_NOTIFIER_ERROR_INJECT.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-4-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Just like we do with alloc_contig_range(), let's convert all unknown
errors to -EBUSY, but WARN so we can look into the issue. For example,
offline_pages() could fail with -EINTR, which would be unexpected in our
case.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-3-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When "unsafe unplug" is enabled, we don't fake-offline all memory ahead of
actual memory offlining using alloc_contig_range(). Instead, we rely on
offline_pages() to also perform actual page migration, which might fail
or take a very long time.
In that case, it's possible to easily run into endless loops that cannot be
aborted anymore (as offlining is triggered by a workqueue then): For
example, a single (accidentally) permanently unmovable page in
ZONE_MOVABLE results in an endless loop. For ZONE_NORMAL, races between
isolating the pageblock (and checking for unmovable pages) and
concurrent page allocation are possible and similarly result in endless
loops.
The idea of the unsafe unplug mode was to make it possible to more
reliably unplug large memory blocks. However, (a) we really should be
tackling that differently, by extending the alloc_contig_range()-based
mechanism; and (b) this mode is not the default and as far as I know,
it's unused either way.
So let's simply get rid of it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-2-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make clearer in debugfs output the difference between the hw
feature bits, the features supported through the driver, and
the features that have been negotiated.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230711042437.69381-6-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
We were allocating irq vectors at the time the aux dev was probed,
but that is before the PCI VF is assigned to a separate iommu domain
by vhost_vdpa. Because vhost_vdpa later changes the iommu domain the
interrupts do not work.
Instead, we can allocate the irq vectors later when we see DRIVER_OK and
know that the reassignment of the PCI VF to an iommu domain has already
happened.
Fixes: 151cc834f3 ("pds_vdpa: add support for vdpa and vdpamgmt interfaces")
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230711042437.69381-5-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make sure that we initialize the vqs[] entries the same
way both for initial setup and after a vq reset.
Fixes: 151cc834f3 ("pds_vdpa: add support for vdpa and vdpamgmt interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230711042437.69381-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Our driver sets a mac if the HW is 00:..:00 so we need to be sure to
advertise VIRTIO_NET_F_MAC even if the HW doesn't. We also need to be
sure that virtio_net sees the VIRTIO_NET_F_MAC and doesn't rewrite the
mac address that a user may have set with the vdpa utility.
After reading the hw_feature bits, add the VIRTIO_NET_F_MAC to the driver's
supported_features and use that for reporting what is available. If the
HW is not advertising it, be sure to strip the VIRTIO_NET_F_MAC before
finishing the feature negotiation. If the user specifies a device_features
bitpattern in the vdpa utility without the VIRTIO_NET_F_MAC set, then
don't set the mac.
Fixes: 151cc834f3 ("pds_vdpa: add support for vdpa and vdpamgmt interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230711042437.69381-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
When the vdpa device is reset, also reinitialize it with the mac address
that was assigned when the device was added.
Fixes: 151cc834f3 ("pds_vdpa: add support for vdpa and vdpamgmt interfaces")
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230711042437.69381-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Kernel uses `struct virtio_net_ctrl_rss` to save command-specific-data
for both the VIRTIO_NET_CTRL_MQ_HASH_CONFIG and
VIRTIO_NET_CTRL_MQ_RSS_CONFIG commands.
According to the VirtIO standard, "Field reserved MUST contain zeroes.
It is defined to make the structure to match the layout of
virtio_net_rss_config structure, defined in 5.1.6.5.7.".
Yet for the VIRTIO_NET_CTRL_MQ_HASH_CONFIG command case, the `max_tx_vq`
field in struct virtio_net_ctrl_rss, which corresponds to the
`reserved` field in struct virtio_net_hash_config, is not zeroed,
thereby violating the VirtIO standard.
This patch solves this problem by zeroing this field in
virtnet_init_default_rss().
Cc: Andrew Melnychenko <andrew@daynix.com>
Cc: stable@vger.kernel.org
Fixes: c7114b1249 ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230810110405.25558-1-yin31149@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Still trending up in size but the good news is that the "current"
regressions are resolved, AFAIK.
We're getting weirdly many fixes for Wake-on-LAN and suspend/resume
handling on embedded this week (most not merged yet), not sure why.
But those are all for older bugs.
Current release - regressions:
- tls: set MSG_SPLICE_PAGES consistently when handing encrypted
data over to TCP
Current release - new code bugs:
- eth: mlx5: correct IDs on VFs internal to the device (IPU)
Previous releases - regressions:
- phy: at803x: fix WoL support / reporting on AR8032
- bonding: fix incorrect deletion of ETH_P_8021AD protocol VID
from slaves, leading to BUG_ON()
- tun: prevent tun_build_skb() from exceeding the packet size limit
- wifi: rtw89: fix 8852AE disconnection caused by RX full flags
- eth/PCI: enetc: fix probing after 6fffbc7ae1 ("PCI: Honor
firmware's device disabled status"), keep PCI devices around
even if they are disabled / not going to be probed to be
able to apply quirks on them
- eth: prestera: fix handling IPv4 routes with nexthop IDs
Previous releases - always broken:
- netfilter: re-work garbage collection to avoid races between
user-facing API and timeouts
- tunnels: fix generating ipv4 PMTU error on non-linear skbs
- nexthop: fix infinite nexthop bucket dump when using maximum
nexthop ID
- wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()
Misc:
- unix: use consistent error code in SO_PEERPIDFD
- ipv6: adjust ndisc_is_useropt() to include PREFIX_INFO,
in prep for upcoming IETF RFC
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NZgp
-----END PGP SIGNATURE-----
Merge tag 'net-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bpf.
Still trending up in size but the good news is that the "current"
regressions are resolved, AFAIK.
We're getting weirdly many fixes for Wake-on-LAN and suspend/resume
handling on embedded this week (most not merged yet), not sure why.
But those are all for older bugs.
Current release - regressions:
- tls: set MSG_SPLICE_PAGES consistently when handing encrypted data
over to TCP
Current release - new code bugs:
- eth: mlx5: correct IDs on VFs internal to the device (IPU)
Previous releases - regressions:
- phy: at803x: fix WoL support / reporting on AR8032
- bonding: fix incorrect deletion of ETH_P_8021AD protocol VID from
slaves, leading to BUG_ON()
- tun: prevent tun_build_skb() from exceeding the packet size limit
- wifi: rtw89: fix 8852AE disconnection caused by RX full flags
- eth/PCI: enetc: fix probing after 6fffbc7ae1 ("PCI: Honor
firmware's device disabled status"), keep PCI devices around even
if they are disabled / not going to be probed to be able to apply
quirks on them
- eth: prestera: fix handling IPv4 routes with nexthop IDs
Previous releases - always broken:
- netfilter: re-work garbage collection to avoid races between
user-facing API and timeouts
- tunnels: fix generating ipv4 PMTU error on non-linear skbs
- nexthop: fix infinite nexthop bucket dump when using maximum
nexthop ID
- wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()
Misc:
- unix: use consistent error code in SO_PEERPIDFD
- ipv6: adjust ndisc_is_useropt() to include PREFIX_INFO, in prep for
upcoming IETF RFC"
* tag 'net-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
net: hns3: fix strscpy causing content truncation issue
net: tls: set MSG_SPLICE_PAGES consistently
ibmvnic: Ensure login failure recovery is safe from other resets
ibmvnic: Do partial reset on login failure
ibmvnic: Handle DMA unmapping of login buffs in release functions
ibmvnic: Unmap DMA login rsp buffer on send login fail
ibmvnic: Enforce stronger sanity checks on login response
net: mana: Fix MANA VF unload when hardware is unresponsive
netfilter: nf_tables: remove busy mark and gc batch API
netfilter: nft_set_hash: mark set element as dead when deleting from packet path
netfilter: nf_tables: adapt set backend to use GC transaction API
netfilter: nf_tables: GC transaction API to avoid race with control plane
selftests/bpf: Add sockmap test for redirecting partial skb data
selftests/bpf: fix a CI failure caused by vsock sockmap test
bpf, sockmap: Fix bug that strp_done cannot be called
bpf, sockmap: Fix map type error in sock_map_del_link
xsk: fix refcount underflow in error path
ipv6: adjust ndisc_is_useropt() to also return true for PIO
selftests: forwarding: bridge_mdb: Make test more robust
selftests: forwarding: bridge_mdb_max: Fix failing test with old libnet
...
