Conditionalize when to put an ndlp into recovery mode when processing
RSCNs. As long as an ndlp state is beyond a PLOGI issue and has been
mapped to a transport layer before, the ndlp qualifies to be put into
recovery mode. Otherwise, treat the ndlp rport normally through the
discovery engine.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In lpfc_cmpl_els_flogi(), the return out: label decrements the ndlp kref
signaling that FLOGI processing on the ndlp is complete. In loop topology
path, there is an unnecessary ndlp put because it also branches to the out:
label. This also signals ndlp usage completion too soon. As such, remove
the extra lpfc_nlp_put() when in loop topology.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver is reaching into a nvme_fc_cmd_iu ptr that belongs to the
transport during an abort. This could cause an unintentional ptr
dereference into memory that the driver does not own. Since the
nvme_fc_cmd_iu ptr was for logging purposes only, simplify the log message
such that the nvme_fc_cmd_iu reference is no longer needed.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The firmware diagnostic dump log message does not need to be a part of the
driver's log trace buffer because it is an expected user triggered event.
Change LOG_TRACE_EVENT verbose flag to LOG_SLI.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document recently added connector for SM5502 MUIC:
qcom/msm8916-samsung-serranove.dtb: extcon@14: 'connector' does not match any of the regexes: 'pinctrl-[0-9]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Do not allow any other properties in connector child, except what
usb-connector.yaml evaluates.
Fixes: 9729cad027 ("dt-bindings: extcon: maxim,max77843: Add MAX77843 bindings")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Alternative function 'gpio' is not listed in the constants for pin
configuration, so adding this constant to the list.
Cc: stable@vger.kernel.org
Fixes: 9a2aaee23c ("dt-bindings: pinctrl: describe sa8775p-tlmm")
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230719110344.19983-1-quic_shazhuss@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus. As
part of that merge prepping Arm DT support 13 years ago, they "temporarily"
include each other. They also include platform_device.h and of.h. As a
result, there's a pretty much random mix of those include files used
throughout the tree. In order to detangle these headers and replace the
implicit includes with struct declarations, users need to explicitly
include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714175052.4066150-1-robh@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus. As
part of that merge prepping Arm DT support 13 years ago, they "temporarily"
include each other. They also include platform_device.h and of.h. As a
result, there's a pretty much random mix of those include files used
throughout the tree. In order to detangle these headers and replace the
implicit includes with struct declarations, users need to explicitly
include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714175052.4066150-1-robh@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus. As
part of that merge prepping Arm DT support 13 years ago, they "temporarily"
include each other. They also include platform_device.h and of.h. As a
result, there's a pretty much random mix of those include files used
throughout the tree. In order to detangle these headers and replace the
implicit includes with struct declarations, users need to explicitly
include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714175018.4064957-1-robh@kernel.org
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The Hyper-V host is queried to get the max transfer size that it supports,
and this value is used to set max_sectors for the synthetic SCSI
controller. However, this max transfer size may be too large for virtual
Fibre Channel devices, which are limited to 512 Kbytes. If a larger
transfer size is used with a vFC device, Hyper-V always returns an error,
and storvsc logs a message like this where the SRB status and SCSI status
are both zero:
hv_storvsc <GUID>: tag#197 cmd 0x8a status: scsi 0x0 srb 0x0 hv 0xc0000001
Add logic to limit the max transfer size to 512 Kbytes for vFC devices.
Fixes: 1d3e098078 ("scsi: storvsc: Correct reporting of Hyper-V I/O size limits")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1689887102-32806-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On some systems amd_pinconf_set() is called with parameters
0x8 (PIN_CONFIG_DRIVE_PUSH_PULL) or 0x14 (PIN_CONFIG_PERSIST_STATE)
which are not supported by pinctrl-amd.
Don't show an err message when called with an invalid parameter,
downgrade this to debug instead.
Cc: stable@vger.kernel.org # 6.1
Fixes: 635a750d95 ("pinctrl: amd: Use amd_pinconf_set() for all config options")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230717201652.17168-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use colons to separate parameter names from their specific meanings to
silence the following warnings:
drivers/ufs/core/ufs-mcq.c:499: warning: Function parameter or member 'hba' not described in 'ufshcd_mcq_sq_cleanup'
drivers/ufs/core/ufs-mcq.c:499: warning: Function parameter or member 'task_tag' not described in 'ufshcd_mcq_sq_cleanup'
drivers/ufs/core/ufs-mcq.c:560: warning: Function parameter or member 'utrd' not described in 'ufshcd_mcq_nullify_sqe'
drivers/ufs/core/ufs-mcq.c:583: warning: Function parameter or member 'hba' not described in 'ufshcd_mcq_sqe_search'
drivers/ufs/core/ufs-mcq.c:583: warning: Function parameter or member 'hwq' not described in 'ufshcd_mcq_sqe_search'
drivers/ufs/core/ufs-mcq.c:583: warning: Function parameter or member 'task_tag' not described in 'ufshcd_mcq_sqe_search'
drivers/ufs/core/ufs-mcq.c:630: warning: Function parameter or member 'cmd' not described in 'ufshcd_mcq_abort'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5850
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230712075836.15375-1-yang.lee@linux.alibaba.com
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no need to call the dev_err() function directly to print a custom
message when handling an error from either the platform_get_irq() or
platform_get_irq_byname() functions as both are going to display an
appropriate error message in case of a failure.
./drivers/ufs/host/ufs-mediatek.c:864:3-10: line 864 is redundant because platform_get_irq() already prints an error
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5846
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230712064832.44188-1-yang.lee@linux.alibaba.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a new pinctrl driver for Amlogic C3 SoCs which share
the same register layout as the previous Amlogic S4.
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Link: https://lore.kernel.org/r/20230714122441.3098337-3-huqiang.qin@amlogic.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a new compatible name for Amlogic C3 pin controller, and add
a new dt-binding header file which document the detail pin names.
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714122441.3098337-2-huqiang.qin@amlogic.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
platform_msi_domain_alloc_irqs() does not always get consecutive IRQ
numbers, hence queue IDs calculated out from IRQ numbers may be incorrect
if we assume IRQ numbers are consecutive. Fix this by passing msi_desc to
ESI handler to use msi_desc->msi_index as queue ID.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/1689062349-77385-1-git-send-email-quic_ziqichen@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently spinlock hisi_hba->lock is used by both interrupts and threads
which requires the use of spin_lock_irqsave()/spin_unlock_irqrestore().
However, some places still use spin_lock()/spin_unlock(). Reviewing the
code revealed that it is unnecessary to use hisi_hba->lock in the function
hisi_sas_port_notify_formed() which is the only place that uses the
spinlock in interrupt context. So delete unused lock in
hisi_sas_port_notify_formed().
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1689045300-44318-4-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When FIO and debugfs snapshot occur concurrently, some SATA I/Os are failed
to return to the upper layer due to the setting of HISI_SAS_REJECT_CMD_BIT.
Then the SCSI layer invokes the error processing thread. However,
sas_ata_hard_reset() in EH also fails to be reset due to the setting of
HISI_SAS_REJECT_CMD_BIT. As a result, the device is disabled.
Calling scsi_block_requests() in the front of a debugfs snapshot and wait
command complete before setting HISI_SAS_REJECT_CMD_BIT to avoid SATA I/O
failures.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1689045300-44318-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The PIO read command has no response frame and the struct iu[1024] won't be
filled. I/Os which are normally completed will be treated as failed in
sas_ata_task_done() when iu contains abnormal dirty data.
Consequently ending_fis should not be filled by iu when the response frame
hasn't been written to memory.
Fixes: d380f55503 ("scsi: hisi_sas: Don't bother clearing status buffer IU in task prep")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1689045300-44318-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When TI UFS host controller driver is built as kernel module it is not
getting auto-loaded due to missing aliases in modules.
Add device tree related aliases.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230710094801.183149-1-u-kumar1@ti.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
`rustc` outputs by default the temporary files (i.e. the ones saved
by `-Csave-temps`, such as `*.rcgu*` files) in the current working
directory when `-o` and `--out-dir` are not given (even if
`--emit=x=path` is given, i.e. it does not use those for temporaries).
Since out-of-tree modules are compiled from the `linux` tree,
`rustc` then tries to create them there, which may not be accessible.
Thus pass `--out-dir` explicitly, even if it is just for the temporary
files.
Similarly, do so for Rust host programs too.
Reported-by: Raphael Nestler <raphael.nestler@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1015
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Raphael Nestler <raphael.nestler@gmail.com> # non-hostprogs
Tested-by: Andrea Righi <andrea.righi@canonical.com> # non-hostprogs
Fixes: 295d8398c6 ("kbuild: specify output names separately for each emission type from rustc")
Cc: stable@vger.kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* Avoid pKVM finalization if KVM initialization fails
* Add missing BTI instructions in the hypervisor, fixing an early boot
failure on BTI systems
* Handle MMU notifiers correctly for non hugepage-aligned memslots
* Work around a bug in the architecture where hypervisor timer controls
have UNKNOWN behavior under nested virt.
* Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG
in cpu hotplug resulting from per-CPU accessor sanity checking.
* Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
* Uphold RES0 sysreg behavior when emulating older PMU versions
* Avoid macro expansion when initializing PMU register names, ensuring
the tracepoints pretty-print the sysreg.
s390:
* Two fixes for asynchronous destroy
x86 fixes will come early next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmS9WpwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOhTAf9EsrnrDK2U0Q1wIGZCh/3d662yslF
Kh0GidZ62w4P1O4q19lFhJ5ixVdHJjGaNrYGZm77yAi0UaYzx4wvkohdaDhIdeMg
3do2uo6/iGU5m24BaVIXlSr8V6KDsMw0UvCAjxFWNvCzpR/7tpLOteXFS9rZQ+1N
jfvoVKqE6LfgJ5IZiVdhIdEOxCf/QuQD/WdZ7fib8ngkY3dETi03MkATFKchtIzx
j5aWruVHQlmb5ukZzHmmNuF7Yf6c1Bs+Rt6JFjyL+DxbtPBJmHP4TepYCDS4UqIm
kkxrsqiTde13jQN7vDWzfzdpLQPIGV9OnvGWQoR4dyKfDlqSxJJyhXPuBw==
=Mkzl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Avoid pKVM finalization if KVM initialization fails
- Add missing BTI instructions in the hypervisor, fixing an early
boot failure on BTI systems
- Handle MMU notifiers correctly for non hugepage-aligned memslots
- Work around a bug in the architecture where hypervisor timer
controls have UNKNOWN behavior under nested virt
- Disable preemption in kvm_arch_hardware_enable(), fixing a kernel
BUG in cpu hotplug resulting from per-CPU accessor sanity checking
- Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
- Uphold RES0 sysreg behavior when emulating older PMU versions
- Avoid macro expansion when initializing PMU register names,
ensuring the tracepoints pretty-print the sysreg
s390:
- Two fixes for asynchronous destroy
x86 fixes will come early next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: pv: fix index value of replaced ASCE
KVM: s390: pv: simplify shutdown and fix race
KVM: arm64: Fix the name of sys_reg_desc related to PMU
KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount
KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption
KVM: arm64: Add missing BTI instructions
KVM: arm64: Correctly handle page aging notifiers for unaligned memslot
KVM: arm64: Disable preemption in kvm_arch_hardware_enable()
KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm
KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits
checkpoint code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmS9HHIACgkQ8vlZVpUN
gaNg/wf8DAf9PMn2bmQ309Acs5E8Qi1bga/ofNnoBcDNC7k+iKGAGgwOnCn+ity4
32KiA5Yh7tzoYvZHUTE5k297mN+4AX4DyAREh1cVITohRxm3BpXYZzezdLSieS8b
7RAdOinaWzs0dBjwNqkKVrTL3jduD704DnefrtHFvwqzBf/QSVSaACoPACqCFyxx
TFvutv2h5ifjS7fsjKXrXjHUAYMJCYzJNOcTW1OUb8rknUhCaKyoCkFht4PawuVx
h1wTkP87RW/bTgHA7Kqrq4BY2nLg8U0B3U/4qmW7wMjUYyAPLTUXKD3Ewj7XaFMA
UYRBr7xba8GWqyOURb3TvzrwRjqTJg==
=inak
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug and regression fixes for 6.5-rc3 for ext4's mballoc and jbd2's
checkpoint code"
* tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix rbtree traversal bug in ext4_mb_use_preallocated
ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail()
ext4: correct inline offset when handling xattrs in inode body
jbd2: remove __journal_try_to_free_buffer()
jbd2: fix a race when checking checkpoint buffer busy
jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint
jbd2: remove journal_clean_one_cp_list()
jbd2: remove t_checkpoint_io_list
jbd2: recheck chechpointing non-dirty buffer
-----BEGIN PGP SIGNATURE-----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=HN3q
-----END PGP SIGNATURE-----
Merge tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fix from Steve French:
"Add minor debugging improvement.
The change improves ability to read a network trace to debug problems
on encrypted connections which are very common (e.g. using wireshark
or tcpdump).
That works today with tools like 'smbinfo keys /mnt/file' but requires
passing in a filename on the mount (see e.g. [1]), but it often makes
more sense to just pass in the mount point path (ie a directory not a
filename).
So this fix was needed to debug some types of problems (an obvious
example is on an encrypted connection failing operations on an empty
share or with no files in the root of the directory) - so you can
simply pass in the 'smbinfo keys <mntpoint>' and get the information
that wireshark needs"
Link: https://wiki.samba.org/index.php/Wireshark_Decryption [1]
* tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number for cifs.ko
cifs: allow dumping keys for directories too
- Avoid pKVM finalization if KVM initialization fails
- Add missing BTI instructions in the hypervisor, fixing an early boot
failure on BTI systems
- Handle MMU notifiers correctly for non hugepage-aligned memslots
- Work around a bug in the architecture where hypervisor timer controls
have UNKNOWN behavior under nested virt.
- Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG
in cpu hotplug resulting from per-CPU accessor sanity checking.
- Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
- Uphold RES0 sysreg behavior when emulating older PMU versions
- Avoid macro expansion when initializing PMU register names, ensuring
the tracepoints pretty-print the sysreg.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZLWvCAAKCRCivnWIJHzd
FvATAQDRFeGjnaEnnq2yufHNRcWeMEUgKSg153LUWYaVKYZMOAD+PfbXmCpZPuz3
5nee77NrjrPHKMm38zMalABuK1qJFQM=
=A7d0
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.5, part #1
- Avoid pKVM finalization if KVM initialization fails
- Add missing BTI instructions in the hypervisor, fixing an early boot
failure on BTI systems
- Handle MMU notifiers correctly for non hugepage-aligned memslots
- Work around a bug in the architecture where hypervisor timer controls
have UNKNOWN behavior under nested virt.
- Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG
in cpu hotplug resulting from per-CPU accessor sanity checking.
- Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
- Uphold RES0 sysreg behavior when emulating older PMU versions
- Avoid macro expansion when initializing PMU register names, ensuring
the tracepoints pretty-print the sysreg.
If client send smb2 negotiate request and then send smb1 negotiate
request, init_smb2_rsp_hdr is called for smb1 negotiate request since
need_neg is set to false. This patch ignore smb1 packets after ->need_neg
is set to false.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21541
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd doesn't support compound read. If client send read-read in
compound to ksmbd, there can be memory leak from read buffer.
Windows and linux clients doesn't send it to server yet. For now,
No response from compound read. compound read will be supported soon.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21587, ZDI-CAN-21588
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
`smb2_get_msg()` in smb2_get_ksmbd_tcon() and smb2_check_user_session()
will always return the first request smb2 header in a compound request.
if `SMB2_TREE_CONNECT_HE` is the first command in compound request, will
return 0, i.e. The tree id check is skipped.
This patch use ksmbd_req_buf_next() to get current command in compound.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21506
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb3_decrypt_req() validate if pdu_length is smaller than
smb2_transform_hdr size.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21589
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since commit 74d7970feb ("ksmbd: fix racy issue from using ->d_parent and
->d_name"), ksmbd can not lookup cross mount points. If last component is
a cross mount point during path lookup, check if it is crossed to follow it
down. And allow path lookup to cross a mount point when a crossmnt
parameter is set to 'yes' in smb.conf.
Cc: stable@vger.kernel.org
Fixes: 74d7970feb ("ksmbd: fix racy issue from using ->d_parent and ->d_name")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 6018b585e8 ("tracing/histograms: Add histograms to hist_vars if
they have referenced variables") added a check to fail histogram creation
if save_hist_vars() failed to add histogram to hist_vars list. But the
commit failed to set ret to failed return code before jumping to
unregister histogram, fix it.
Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com
Cc: stable@vger.kernel.org
Fixes: 6018b585e8 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make it slightly easier to see which compiler options are added and
removed (and not worry about column limit too!).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Like C source files, tooling can find it useful to have the assembly
source file compilation recorded.
The .S extension appears to used across all architectures.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The function lsm6dsx_get_acpi_mount_matrix should return an error when ACPI
support is not enabled to allow executing iio_read_mount_matrix in the
probe function.
Fixes: dc3d25f22b ("iio: imu: lsm6dsx: Add ACPI mount matrix retrieval")
Signed-off-by: Alejandro Tafalla <atafalla@dnyon.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20230714153132.27265-1-atafalla@dnyon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230714174628.4057920-1-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Format attributes on functions taking format string can help compilers
detect argument type or count mismatches.
Please the compiler when building with W=1:
security/tomoyo/audit.c: In function ‘tomoyo_init_log’:
security/tomoyo/audit.c:290:9: error: function ‘tomoyo_init_log’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
290 | vsnprintf(buf + pos, len - pos, fmt, args);
| ^~~~~~~~~
security/tomoyo/audit.c: In function ‘tomoyo_write_log2’:
security/tomoyo/audit.c:376:9: error: function ‘tomoyo_write_log2’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
376 | buf = tomoyo_init_log(r, len, fmt, args);
| ^~~
security/tomoyo/common.c: In function ‘tomoyo_addprintf’:
security/tomoyo/common.c:193:9: error: function ‘tomoyo_addprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
193 | vsnprintf(buffer + pos, len - pos - 1, fmt, args);
| ^~~~~~~~~
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
adis16477 devices support burst32 function, thus has_burst32
flag should be set to true.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230719123152.309624-3-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Murata IRS-D200 is a PIR sensor for human detection. It has support for
raw data measurements and detection event notification.
Add a driver with support for triggered buffer and events. Map the
various settings to the `iio` framework, e.g. threshold values, sampling
frequency, filter frequencies etc.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/d218a1bc75402b5ebd6e12a563f7315f83fe966c.1689753076.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
During allocations, while looking for preallocations(PA) in the per
inode rbtree, we can't do a direct traversal of the tree because
ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted
and that can cause direct traversal to skip some entries. This was
leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy
our request and ultimately tried to create a new PA that would overlap
with the missed one.
To makes sure we handle that case while still keeping the performance of
the rbtree, we make use of the fact that the only pa that could possibly
overlap the original goal start is the one that satisfies the below
conditions:
1. It must have it's logical start immediately to the left of
(ie less than) original logical start.
2. It must not be deleted
To find this pa we use the following traversal method:
1. Descend into the rbtree normally to find the immediate neighboring
PA. Here we keep descending irrespective of if the PA is deleted or if
it overlaps with our request etc. The goal is to find an immediately
adjacent PA.
2. If the found PA is on right of original goal, use rb_prev() to find
the left adjacent PA.
3. Check if this PA is deleted and keep moving left with rb_prev() until
a non deleted PA is found.
4. This is the PA we are looking for. Now we can check if it can satisfy
the original request and proceed accordingly.
This approach also takes care of having deleted PAs in the tree.
(While we are at it, also fix a possible overflow bug in calculating the
end of a PA)
[1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/
Cc: stable@kernel.org # 6.4
Fixes: 3872778664 ("ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Tested-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Link: https://lore.kernel.org/r/edd2efda6a83e6343c5ace9deea44813e71dbe20.1690045963.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_mb_choose_next_group_best_avail(), we want the start order to be
1 less than goal length and the min_order to be, at max, 1 more than the
original length. This commit fixes an off by one issue that arose due to
the fact that 1 << fls(n) > (n).
After all the processing:
order = 1 order below goal len
min_order = maximum of the three:-
- order - trim_order
- 1 order below B2C(s_stripe)
- 1 order above original len
Cc: stable@kernel.org
Fixes: 33122aa930 ("ext4: Add allocation criteria 1.5 (CR1_5)")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609103403.112807-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When run on a file system where the inline_data feature has been
enabled, xfstests generic/269, generic/270, and generic/476 cause ext4
to emit error messages indicating that inline directory entries are
corrupted. This occurs because the inline offset used to locate
inline directory entries in the inode body is not updated when an
xattr in that shared region is deleted and the region is shifted in
memory to recover the space it occupied. If the deleted xattr precedes
the system.data attribute, which points to the inline directory entries,
that attribute will be moved further up in the region. The inline
offset continues to point to whatever is located in system.data's former
location, with unfortunate effects when used to access directory entries
or (presumably) inline data in the inode body.
Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230522181520.1570360-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are devices (such as Murata IRS-D200 PIR proximity sensor) that
check the data signal with a running period. I.e. for a specified time,
they count the number of conditions that have occurred, and then signal
if that is more than a specified amount.
`IIO_EV_INFO_PERIOD` resets when the condition no longer is true and is
therefore not suitable for these devices. Add a new `iio_event_info`
`IIO_EV_INFO_RUNNING_PERIOD` that can be used as a running period. Also
add a new `IIO_EV_INFO_RUNNING_COUNT` that can be used to specify the
number of conditions that must occur during this running period.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/ee4a801ae9b9c4716c7bd23d8f79f232351df8bd.1689753076.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Murata IRS-D200 is a PIR sensor for human detection. It uses the I2C bus
for communication with interrupt support. Add devicetree bindings
requiring the compatible string, I2C slave address (reg), power supply
and interrupts.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/09975910ea638a9aa893411124bbd2a5c98e45c3.1689753076.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
