The debug UART doesn't support DMA and the DT bindings prohibit the use
of the dmas and dma-names properties for it, so remove them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the Tegra High-Speed UART bindings from the free-form text
format to json-schema.
While at it, also fix fix the example to reflect the correct compatible
string for Tegra30 chips.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the NVIDIA Tegra AHB bindings from the free-form text format to
json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the Tegra flow controller bindings from the free-form text
format to json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit c44e0503e5 ("docs: dt: fix documented Primecell compatible string")
removed the last occurrence of incorrect "arm,amba-primecell" compatible
string, but somehow one occurrence of the same is left in the nspire platform.
Fix the same by replacing it with the correct "arm,primecell" compatible.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230711092617.1412815-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A single simple fix removing dangling symlink left as part of arm dts
files movement to vendor sub-directories. It is harmless and causes no
issue for the build but scripts copying files see errors/failures.
-----BEGIN PGP SIGNATURE-----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=zAdn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=gWV7
-----END PGP SIGNATURE-----
Merge tag 'juno-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Armv8 Juno/Vexpress DTS fix for v6.5
A single simple fix removing dangling symlink left as part of arm dts
files movement to vendor sub-directories. It is harmless and causes no
issue for the build but scripts copying files see errors/failures.
* tag 'juno-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink
Link: https://lore.kernel.org/r/20230721112359.3369716-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For ADV7533 and ADV7535 low refresh rate is selected using
bits [3:2] of 0x4a main register.
So depending on ADV model write 0xfb or 0x4a register.
Fixes: 2437e7cd88 ("drm/bridge: adv7533: Initial support for ADV7533")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719060143.63649-1-alex@shruggie.ro
* 'genpd_create_dir' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
ARM: ux500: Move power-domain driver to the genpd dir
ARM: ux500: Convert power-domain code into a regular platform driver
soc: xilinx: Move power-domain driver to the genpd dir
soc: ti: Mover power-domain drivers to the genpd dir
soc: tegra: Move powergate-bpmp driver to the genpd dir
soc: sunxi: Move power-domain driver to the genpd dir
soc: starfive: Move the power-domain driver to the genpd dir
soc: samsung: Move power-domain driver to the genpd dir
soc: rockchip: Mover power-domain driver to the genpd dir
soc: renesas: Move power-domain drivers to the genpd dir
soc: qcom: Move power-domain drivers to the genpd dir
soc: mediatek: Move power-domain drivers to the genpd dir
soc: imx: Move power-domain drivers to the genpd dir
soc: bcm: Move power-domain drivers to the genpd dir
soc: apple: Move power-domain driver to the genpd dir
soc: amlogic: Move power-domain drivers to the genpd dir
soc: actions: Move power-domain driver to the genpd dir
genpd: Create a new subsystem directory to host genpd providers
Link: https://lore.kernel.org/r/20230714092301.28690-1-ulf.hansson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PMX65 does not have vdd-l18-supply separately and its
already part of vdd-l2-l18-supply property specified.
Updating this PMX65 dt-bindings entry accordingly.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1689062414-3654-2-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support DAC filter characteristics selection: Normal mode
and Sloping stopband. Sloping stopband may have
better frequency response.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1689927842-21165-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver was introduced when .probe_new was the right probe callback
to use for i2c drivers. Today .probe is the right one (again) and the
driver was already switched in commit 964e186547 ("regulator: Switch
i2c drivers back to use .probe()") but the name continued to include
"_new". To prevent code readers wondering about what might be new here,
drop that part of the name.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230721073303.112597-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
When we reconfigure the SVE vector length we discard the backing storage
for the SVE vectors and then reallocate on next SVE use, leaving the SME
specific state alone. This means that we do not enable SME traps if they
were already disabled. That means that userspace code can enter streaming
mode without trapping, putting the task in a state where if we try to save
the state of the task we will fault.
Since the ABI does not specify that changing the SVE vector length disturbs
SME state, and since SVE code may not be aware of SME code in the process,
we shouldn't simply discard any ZA state. Instead immediately reallocate
the storage for SVE, and disable SME if we change the SVE vector length
while there is no SME state active.
Disabling SME traps on SVE vector length changes would make the overall
code more complex since we would have a state where we have valid SME state
stored but might get a SME trap.
Fixes: 9e4ab6c891 ("arm64/sme: Implement vector length configuration prctl()s")
Reported-by: David Spickett <David.Spickett@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-1-8eea06b82d57@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In the case of devices with multiple clocks, drivers need to specify the
clock index for the OPP framework to find the OPP corresponding to the
floor/ceil of the supplied frequency. So let's introduce the two new APIs
accepting the clock index as an argument.
These APIs use the exising _find_key_ceil() helper by supplying the clock
index to it.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Viresh: Rearranged definitions in pm_opp.h ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Hariprasad Kelam says:
====================
octeontx2-pf: support Round Robin scheduling
octeontx2 and CN10K silicons support Round Robin scheduling. When multiple
traffic flows reach transmit level with the same priority, with Round Robin
scheduling traffic flow with the highest quantum value is picked. With this
support, the user can add multiple classes with the same priority and
different quantum in htb offload.
This series of patches adds support for the same.
Patch1: implement transmit schedular allocation algorithm as preparation
for support round robin scheduling.
Patch2: Allow quantum parameter in HTB offload mode.
Patch3: extends octeontx2 htb offload support for Round Robin scheduling
Patch4: extend QOS documentation for Round Robin scheduling
Hariprasad Kelam (1):
docs: octeontx2: extend documentation for Round Robin scheduling
Naveen Mamindlapalli (3):
octeontx2-pf: implement transmit schedular allocation algorithm
sch_htb: Allow HTB quantum parameter in offload mode
octeontx2-pf: htb offload support for Round Robin scheduling
---
v4 * update classid values in documentation.
v3 * 1. update QOS documentation for round robin scheduling
2. added out of bound checks for quantum parameter
v2 * change data type of otx2_index_used to reduce size of structure
otx2_qos_cfg
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add example tc-htb commands for Round robin scheduling
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When multiple traffic flows reach Transmit level with the same
priority, with Round robin scheduling traffic flow with the highest
quantum value is picked. With this support, the user can add multiple
classes with the same priority and different quantum. This patch
does necessary changes to support the same.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current implementation of HTB offload returns the EINVAL error for
quantum parameter. This patch removes the error returning checks for
'quantum' parameter and populates its value to tc_htb_qopt_offload
structure such that driver can use the same.
Add quantum parameter check in mlx5 driver, as mlx5 devices are not capable
of supporting the quantum parameter when htb offload is used. Report error
if quantum parameter is set to a non-default value.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
unlike strict priority, where number of classes are limited to max
8, there is no restriction on the number of dwrr child nodes unless
the count increases the max number of child nodes supported.
Hardware expects strict priority transmit schedular indexes mapped
to their priority. This patch adds defines transmit schedular allocation
algorithm such that the above requirement is honored.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rearrange the helper function declarations / definitions to keep them in
order of freq, level and then bw.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Petr Machata says:
====================
mlxsw: Permit enslavement to netdevices with uppers
The mlxsw driver currently makes the assumption that the user applies
configuration in a bottom-up manner. Thus netdevices need to be added to
the bridge before IP addresses are configured on that bridge or SVI added
on top of it. Enslaving a netdevice to another netdevice that already has
uppers is in fact forbidden by mlxsw for this reason. Despite this safety,
it is rather easy to get into situations where the offloaded configuration
is just plain wrong.
As an example, take a front panel port, configure an IP address: it gets a
RIF. Now enslave the port to the bridge, and the RIF is gone. Remove the
port from the bridge again, but the RIF never comes back. There is a number
of similar situations, where changing the configuration there and back
utterly breaks the offload.
Similarly, detaching a front panel port from a configured topology means
unoffloading of this whole topology -- VLAN uppers, next hops, etc.
Attaching the port back is then not permitted at all. If it were, it would
not result in a working configuration, because much of mlxsw is written to
react to changes in immediate configuration. There is nothing that would go
visit netdevices in the attached-to topology and offload existing routes
and VLAN memberships, for example.
In this patchset, introduce a number of replays to be invoked so that this
sort of post-hoc offload is supported. Then remove the vetoes that
disallowed enslavement of front panel ports to other netdevices with
uppers.
The patchset progresses as follows:
- In patch #1, fix an issue in the bridge driver. To my knowledge, the
issue could not have resulted in a buggy behavior previously, and thus is
packaged with this patchset instead of being sent separately to net.
- In patch #2, add a new helper to the switchdev code.
- In patch #3, drop mlxsw selftests that will not be relevant after this
patchset anymore.
- Patches #4, #5, #6, #7 and #8 prepare the codebase for smoother
introduction of the rest of the code.
- Patches #9, #10, #11, #12, #13 and #14 replay various aspects of upper
configuration when a front panel port is introduced into a topology.
Individual patches take care of bridge and LAG RIF memberships, switchdev
replay, nexthop and neighbors replay, and MACVLAN offload.
- Patches #15 and #16 introduce RIFs for newly-relevant netdevices when a
front panel port is enslaved (in which case all uppers are newly
relevant), or, respectively, deslaved (in which case the newly-relevant
netdevice is the one being deslaved).
- Up until this point, the introduced scaffolding was not really used,
because mlxsw still forbids enslavement of mlxsw netdevices to uppers
with uppers. In patch #17, this condition is finally relaxed.
A sizable selftest suite is available to test all this new code. That will
be sent in a separate patchset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Enslaving of front panel ports (and their uppers) to netdevices that
already have uppers is currently forbidden. In the previous patches, a
number of replays have been added. Those ensure that various bits of state,
such as next hops or switchdev objects, are offloaded when they become
relevant due to a mlxsw lower being introduced into the topology.
However the act of actually, for example, enslaving a front-panel port to
a bridge with uppers, has been vetoed so far. In this patch, remove the
vetoes and permit the operation.
mlxsw currently validates creation of "interesting" uppers. Thus creating
VLAN netdevices on top of 802.1ad bridges is forbidden if the bridge has an
mlxsw lower, but permitted in general. This validation code never gets run
when a port is introduced as a lower of an existing netdevice structure.
Thus when enslaving an mlxsw netdevice to netdevices with uppers, invoke
the PRECHANGEUPPER event handler for each netdevice above the one that the
front panel port is being enslaved to. This way the tower of netdevices
above the attachment point is validated.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a netdevice is removed from a bridge or a LAG, and it has an IP
address, it should join the router and gain a RIF. Do that by replaying
address addition event on the netdevice.
When handling deslavement of LAG or its upper from a bridge device, the
replay should be done after all the lowers of the LAG have left the bridge.
Thus these scenarios are handled by passing replay_deslavement of false,
and by invoking, after the lowers have been processed, a new helper,
mlxsw_sp_netdevice_post_lag_event(), which does the per-LAG / -upper
handling, and in particular invokes the replay.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enslaving of front panel ports (and their uppers) to netdevices that
already have uppers is currently forbidden. When this is permitted, any
uppers with IP addresses need to have the NETDEV_UP inetaddr event
replayed, so that any RIFs are created.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As neighbours are created, mlxsw is involved through the netevent
notifications. When at the time there is no RIF for a given neighbour, the
notification is not acted upon. When the RIF is later created, these
outstanding neighbours are left unoffloaded and cause traffic to go through
the SW datapath.
In order to fix this issue, as a RIF is created, walk the ARP and ND tables
and find neighbours for the netdevice that represents the RIF. Then
schedule neighbour work for them, allowing them to be offloaded.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If IP address is added to a MACVLAN netdevice, the effect is of configuring
VRRP on the RIF for the netdevice linked to the MACVLAN. Because the
MACVLAN offload is tied to existence of a RIF at the linked netdevice,
adding a MACVLAN is currently not allowed until a RIF is present.
If this requirement stays, it will never be possible to attach a first port
into a topology that involves a MACVLAN. Thus topologies would need to be
built in a certain order, which is impractical.
Additionally, IP address removal, which leads to disappearance of the RIF
that the MACVLAN depends on, cannot be vetoed. Thus even as things stand
now it is possible to get to a state where a MACVLAN netdevice exists
without a RIF, despite having mlxsw lowers. And once the MACVLAN is
un-offloaded due to RIF getting destroyed, recreating the RIF does not
bring it back.
In this patch, accept that MACVLAN can be created out of order and support
that use case.
One option would seem to be to simply recognize MACVLAN netdevices as
"interesting", and let the existing replay mechanisms take care of the
offload. However, that does not address the necessity to reoffload MACVLAN
once a RIF is created.
Thus add a new replay hook, symmetrical to mlxsw_sp_rif_macvlan_flush(),
called mlxsw_sp_rif_macvlan_replay(), which instead of unwinding the
existing offloads, applies the configuration as if the netdevice were
created just now.
Additionally, remove all vetoes and warning messages that checked for
presence of a RIF at the linked device.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As RIF is created, refresh each netxhop group tracked at the CRIF for which
the RIF was created.
Note that nothing needs to be done for IPIP nexthops. The RIF for these is
either available from the get-go, or will never be available, so no after
the fact offloading needs to be done.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the following patches, the requirement that ports be only enslaved to
masters without uppers, is going to be relaxed. It will therefore be
necessary to join not only RIF for the immediate LAG, as is currently the
case, but also RIFs for VLAN netdevices upper to the LAG.
In this patch, extend mlxsw_sp_netdevice_router_join_lag() to walk the
uppers of a LAG being joined, and also join any VLAN ones.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently it never happens that a netdevice that is already a bridge slave
would suddenly become mlxsw upper. The only case where this might be
possible as far as mlxsw is concerned, is with LAG netdevices. But if a LAG
has any upper (e.g. is enslaved), enlaving mlxsw port to that LAG is
forbidden. Thus the only way to install a LAG between a bridge and a mlxsw
port is by first enslaving the port to the LAG, and then enslaving that LAG
to a bridge. At that point there are no bridge objects (such as port VLANs)
to replay. Those are added afterwards, and notified as they are created.
This holds even for the PVID.
However in the following patches, the requirement that ports be only
enslaved to masters without uppers, is going to be relaxed. It will
therefore be necessary to replay the existing bridge objects. Without this
replay, e.g. the mlxsw bridge_port_vlan objects are not instantiated, which
causes issues later, as a lot of code relies on their presence.
To that end, add a new notifier block whose sole role is to filter out
events related to the one relevant upper, and forward those to the existing
switchdev notifier block. Pass the new notifier block to
switchdev_bridge_port_offload() when the bridge port is created.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently it never happens that a netdevice that is already a bridge slave
would suddenly become mlxsw upper. The only case where this might be
possible as far as mlxsw is concerned, is with LAG netdevices. But if a LAG
already has an upper, enslaving mlxsw port to that LAG is forbidden. Thus
the only way to install a LAG between a bridge and a mlxsw port is by first
enslaving the port to the LAG, and then enslaving that LAG to a bridge.
However in the following patches, the requirement that ports be only
enslaved to masters without uppers, is going to be relaxed. It will
therefore be necessary to join bridges of LAG uppers. Without this replay,
the mlxsw bridge_port objects are not instantiated, which causes issues
later, as a lot of code relies on their presence.
Therefore in this patch, when the first mlxsw physical netdevice is
enslaved to a LAG, consider bridges upper to the LAG (both the direct
master, if any, and any bridge masters of VLAN uppers), and have the
relevant netdevices join their bridges.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When handling deslavement of LAG or its upper from a bridge device, when
the deslaved netdevice has an IP address, it should join the router. This
should be done after all the lowers of the LAG have left the bridge. The
replay intended to cause the device to join the router therefore cannot be
invoked unconditionally in the event handlers themselves. It can be done
right away if the handler is invoked for a sole device, but when it is
invoked repeated for each LAG lower, the replay needs to be postponed
until after this processing is done.
To that end, add a boolean parameter, replay_deslavement, to
mlxsw_sp_netdevice_port_upper_event(), mlxsw_sp_netdevice_port_vlan_event()
and one helper on the call path. Have the invocations that are done for
sole netdevices pass true, and those done for LAG lowers pass false.
Nothing depends on this flag at this point, but it removes some noise from
the patch that introduces the replay itself.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the bridge-related handlers bail out when the event is related to
a netdevice that is not an upper of one of the front-panel ports. In order
to allow enslavement of front-panel ports to bridges that already have
uppers, it will be necessary to replay CHANGEUPPER events to validate that
the configuration is offloadable. In order for the replay to be effective,
it must be possible to ignore unsupported configuration in the context of
an actual notifier event, but to still "veto" these configurations when the
validation is performed.
To that end, introduce two parameters to a number of handlers: mlxsw_sp,
because it will not be possible to deduce that from the netdevice lowers;
and process_foreign to indicate whether netdevices that are not front panel
uppers should be validated.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the meat of mlxsw_sp_netdevice_event() to a separate function that
does just the validation. This separate helper will be possible to call
later for recursive ascent when validating attachment of a front panel port
to a bridge with uppers.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will come in handy for neighbour replay.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the IP address event handlers bail out when the event is related
to a netdevice that is a bridge port or a member of a LAG. In order to
create a RIF when a bridged or LAG'd port is unenslaved, these event
handlers will be replayed. However, at the point in time when the
NETDEV_CHANGEUPPER event is delivered, informing of the loss of
enslavement, the port is still formally enslaved.
In order for the operation to have any effect, these handlers need an extra
parameter to indicate that the check for bridge or LAG membership should
not be done. In this patch, add an argument "nomaster" to several event
handlers.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support for enslaving ports to LAGs with uppers will be added in the
following patches. Selftests to make sure it actually does the right thing
are ready and will be sent as a follow-up.
Similarly, ordering of MACVLAN creation and RIF creation will be relaxed
and it will be permitted to create a MACVLAN first.
Thus these two tests are obsolete. Drop them.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a front panel joins a bridge via another netdevice (typically a LAG),
the driver needs to learn about the objects configured on the bridge port.
When the bridge port is offloaded by the driver for the first time, this
can be achieved by passing a notifier to switchdev_bridge_port_offload().
The notifier is then invoked for the individual objects (such as VLANs)
configured on the bridge, and can look for the interesting ones.
Calling switchdev_bridge_port_offload() when the second port joins the
bridge lower is unnecessary, but the replay is still needed. To that end,
add a new function, switchdev_bridge_port_replay(), which does only the
replay part of the _offload() function in exactly the same way as that
function.
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Ivan Vecera <ivecera@redhat.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two kinds of MDB entries to be replayed: port MDB entries, and
host MDB entries. They are both replayed by br_switchdev_mdb_replay(). If
the driver supports one kind, but lacks the other, the first -EOPNOTSUPP
returned terminates the whole replay, including any further still-supported
objects in the list.
For this to cause issues, there must be MDB entries for both the host and
the port being replayed. In that case, if the driver bails out from
handling the host entry, the port entries are never replayed. However, the
replay is currently only done when a switchdev port joins a bridge. There
would be no port memberships at that point. Thus despite being erroneous,
the code does not cause observable bugs.
This is not an issue with other object kinds either, because there, each
function replays one object kind. If a driver does not support that kind,
it makes sense to bail out early. -EOPNOTSUPP is then ignored in
nbp_switchdev_sync_objs().
For MDB, suppress the -EOPNOTSUPP error code in br_switchdev_mdb_replay()
already, so that the whole list gets replayed.
The reason we need this patch is that a future patch will introduce a
replay that should be used when a front-panel port netdevice is enslaved to
a bridge lower, in particular a LAG. The LAG netdevice can already have
both host and port MDB entries. The port entries need to be replayed so
that they are offloaded on the port that joins the LAG.
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Ivan Vecera <ivecera@redhat.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move start_freeze into nvme_rdma_configure_io_queues(), and there is
at least two benefits:
1) fix unbalanced freeze and unfreeze, since re-connection work may
fail or be broken by removal
2) IO during error recovery can be failfast quickly because nvme fabrics
unquiesces queues after teardown.
One side-effect is that !mpath request may timeout during connecting
because of queue topo change, but that looks not one big deal:
1) same problem exists with current code base
2) compared with !mpath, mpath use case is dominant
Fixes: 9f98772ba3 ("nvme-rdma: fix controller reset hang during traffic")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Move start_freeze into nvme_tcp_configure_io_queues(), and there is
at least two benefits:
1) fix unbalanced freeze and unfreeze, since re-connection work may
fail or be broken by removal
2) IO during error recovery can be failfast quickly because nvme fabrics
unquiesces queues after teardown.
One side-effect is that !mpath request may timeout during connecting
because of queue topo change, but that looks not one big deal:
1) same problem exists with current code base
2) compared with !mpath, mpath use case is dominant
Fixes: 2875b0aeca ("nvme-tcp: fix controller reset hang during traffic")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Error recovery can be interrupted by controller removal, then the
controller is left as quiesced, and IO hang can be caused.
Fix the issue by unquiescing controller unconditionally when removing
namespaces.
This way is reasonable and safe given forward progress can be made
when removing namespaces.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reported-by: Chunguang Xu <brookxu.cn@gmail.com>
Closes: https://lore.kernel.org/linux-nvme/cover.1685350577.git.chunguang.xu@shopee.com/
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Introduce MTK_FOE_ENTRY_V{1,2}_SIZE macros in order to make more
explicit foe_entry size for different chipset revisions.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of open-code, use the new standard helper to manage vmaster
stuff for code simplification.
Also, handle the errors from the helper more properly instead of
silently ignoring.
The code changes the call order of snd_ctl_add() of the vmaster object
and its followers for avoiding the possible memory leaks at error
path. But there should be no difference in the functionality.
Link: https://lore.kernel.org/r/20230721071643.3631-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of open-code, use the new standard helper to manage vmaster
stuff for code simplification.
Also, handle the errors from the helper more properly instead of
silently ignoring.
Link: https://lore.kernel.org/r/20230721071643.3631-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of open-code, use the new standard helper to manage vmaster
stuff for code simplification.
Except for a debug print, there should be no functional change.
Link: https://lore.kernel.org/r/20230721071643.3631-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new helper to add multiple vmaster followers in a shot. The
same function was open-coded in various places, and this helper
replaces them.
Link: https://lore.kernel.org/r/20230721071643.3631-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
