This adds supports for the ENCL encoder connected to a MIPI-DSI transceiver on the
Amlogic AXG, G12A, G12B & SM1 SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com> # on Khadas VIM3 + TS050 Panel
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-10-56eb7a4d5b8e@linaro.org
Only DW-HDMI currently needs components since it reuses
the drm-meson driver context to access HHI registers (sic).
Once this is solved, we can get rid on components.
Until now, limit the components matching to the dw-hdmi compatibles
we know to require this hack, for other bridges simply use probe defer
instead and get over this components sitation.
The back story is that we simply cannot attach DSI adapters bridges
if we use components, only DSI panels, this is because we bind/unbind
the DSI controller at each drm-meson driver master bind tentative.
With this the I2C DSI bridge is unable to find the DSI controller
host and everything fails to probe.
This will simplify a lot adding new or older HDMI bridges.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com> # on Khadas VIM3 + TS050 Panel
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-9-56eb7a4d5b8e@linaro.org
If the case the HDMI controller fails to bind, we try to unbind
all components before calling drm_dev_put() which makes drm_bridge_detach()
crash because unbinding the HDMI controller frees the bridge memory.
The solution is the unbind all components at the end like in the remove
path.
Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-8-56eb7a4d5b8e@linaro.org
The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI
transceiver (ver 1.21a) with a custom glue managing the IP resets,
clock and data inputs similar to the DW-HDMI Glue on the same
Amlogic SoC families.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-6-56eb7a4d5b8e@linaro.org
A switch held in reset by default needs to wait longer until we can
reliably detect it.
An issue was observed when testing on the Marvell 88E6393X (Link Street).
The driver failed to detect the switch on some upstarts. Increasing the
wait time after reset deactivation solves this issue.
The updated wait time is now also the same as the wait time in the
mv88e6xxx_hardware_reset function.
Fixes: 7b75e49de4 ("net: dsa: mv88e6xxx: wait after reset deactivation")
Signed-off-by: Andreas Svensson <andreas.svensson@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Zero-length and one-element arrays are deprecated, and we are moving
towards adopting C99 flexible-array members, instead.
Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
sound/firewire/amdtp-stream.c: In function ‘build_it_pkt_header’:
sound/firewire/amdtp-stream.c:694:17: warning: ‘generate_cip_header’ accessing 8 bytes in a region of size 0 [-Wstringop-overflow=]
694 | generate_cip_header(s, cip_header, data_block_counter, syt);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/firewire/amdtp-stream.c:694:17: note: referencing argument 2 of type ‘__be32[2]’ {aka ‘unsigned int[2]’}
sound/firewire/amdtp-stream.c:667:13: note: in a call to function ‘generate_cip_header’
667 | static void generate_cip_header(struct amdtp_stream *s, __be32 cip_header[2],
| ^~~~~~~~~~~~~~~~~~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/303
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZHT0V3SpvHyxCv5W@work
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Originally, add this check rule to prevent entering LPS if more than one
vif (in station mode) connect to AP. Since we have checked this by previous
commit, remove this redundant check.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230527082939.11206-4-pkshih@realtek.com
This driver relies on IEEE80211_CONF_PS of hw->conf.flags to turn off PS or
turn on dynamic PS controlled by driver and firmware. Though this would be
incorrect, it did work before because the flag is always recalculated until
the commit 28977e790b ("wifi: mac80211: skip powersave recalc if driver SUPPORTS_DYNAMIC_PS")
is introduced by kernel 5.20 to skip to recalculate IEEE80211_CONF_PS
of hw->conf.flags if driver sets SUPPORTS_DYNAMIC_PS.
Correct this by doing recalculation while BSS_CHANGED_PS is changed and
interface is added or removed. For now, it is allowed to enter PS only if
single one station vif is working, and it could possible to have PS per
vif after firmware can support it. Without this fix, driver doesn't
enter PS anymore that causes higher power consumption.
Fixes: e3ec7017f6 ("rtw89: add Realtek 802.11ax driver")
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230527082939.11206-3-pkshih@realtek.com
This driver relies on IEEE80211_CONF_PS of hw->conf.flags to turn off PS or
turn on dynamic PS controlled by driver and firmware. Though this would be
incorrect, it did work before because the flag is always recalculated until
the commit 28977e790b ("wifi: mac80211: skip powersave recalc if driver SUPPORTS_DYNAMIC_PS")
is introduced by kernel 5.20 to skip to recalculate IEEE80211_CONF_PS
of hw->conf.flags if driver sets SUPPORTS_DYNAMIC_PS.
Correct this by doing recalculation while BSS_CHANGED_PS is changed and
interface is added or removed. It is allowed to enter PS only if single
one station vif is working. Without this fix, driver doesn't enter PS
anymore that causes higher power consumption.
Fixes: bcde60e599 ("rtw88: remove misleading module parameter rtw_fw_support_lps")
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230527082939.11206-2-pkshih@realtek.com
pktq_empty was added in commit 5b435de0d7 ("net: wireless: add brcm80211
drivers") but it is currently not being utilized in some areas. This commit
replaces the open code with the pktq_empty() function.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230527114954.3281-2-claudiajkang@gmail.com
Although rtl_get_hdr was added in commit 3dad618b7b ("rtlwifi: Change
wifi.h for rtl8192se and rtl8192de"), it is currently not being utilized
in some areas. This commit replaces the open code with the rtl_get_hdr()
function.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230527114954.3281-1-claudiajkang@gmail.com
[BUG]
After commit e02ee89baa ("btrfs: scrub: switch scrub_simple_mirror()
to scrub_stripe infrastructure"), scrub no longer works for zoned device
at all.
Even an empty zoned btrfs cannot be replaced:
# mkfs.btrfs -f /dev/nvme0n1
# mount /dev/nvme0n1 /mnt/btrfs
# btrfs replace start -Bf 1 /dev/nvme0n2 /mnt/btrfs
Resetting device zones /dev/nvme1n1 (160 zones) ...
ERROR: ioctl(DEV_REPLACE_START) failed on "/mnt/btrfs/": Input/output error
And we can hit kernel crash related to that:
BTRFS info (device nvme1n1): host-managed zoned block device /dev/nvme3n1, 160 zones of 134217728 bytes
BTRFS info (device nvme1n1): dev_replace from /dev/nvme2n1 (devid 2) to /dev/nvme3n1 started
nvme3n1: Zone Management Append(0x7d) @ LBA 65536, 4 blocks, Zone Is Full (sct 0x1 / sc 0xb9) DNR
I/O error, dev nvme3n1, sector 786432 op 0xd:(ZONE_APPEND) flags 0x4000 phys_seg 3 prio class 2
BTRFS error (device nvme1n1): bdev /dev/nvme3n1 errs: wr 1, rd 0, flush 0, corrupt 0, gen 0
BUG: kernel NULL pointer dereference, address: 00000000000000a8
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock_irqsave+0x1e/0x40
Call Trace:
<IRQ>
btrfs_lookup_ordered_extent+0x31/0x190
btrfs_record_physical_zoned+0x18/0x40
btrfs_simple_end_io+0xaf/0xc0
blk_update_request+0x153/0x4c0
blk_mq_end_request+0x15/0xd0
nvme_poll_cq+0x1d3/0x360
nvme_irq+0x39/0x80
__handle_irq_event_percpu+0x3b/0x190
handle_irq_event+0x2f/0x70
handle_edge_irq+0x7c/0x210
__common_interrupt+0x34/0xa0
common_interrupt+0x7d/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
[CAUSE]
Dev-replace reuses scrub code to iterate all extents and write the
existing content back to the new device.
And for zoned devices, we call fill_writer_pointer_gap() to make sure
all the writes into the zoned device is sequential, even if there may be
some gaps between the writes.
However we have several different bugs all related to zoned dev-replace:
- We are using ZONE_APPEND operation for metadata style write back
For zoned devices, btrfs has two ways to write data:
* ZONE_APPEND for data
This allows higher queue depth, but will not be able to know where
the write would land.
Thus needs to grab the real on-disk physical location in it's endio.
* WRITE for metadata
This requires single queue depth (new writes can only be submitted
after previous one finished), and all writes must be sequential.
For scrub, we go single queue depth, but still goes with ZONE_APPEND,
which requires btrfs_bio::inode being populated.
This is the cause of that crash.
- No correct tracing of write_pointer
After a write finished, we should forward sctx->write_pointer, or
fill_writer_pointer_gap() would not work properly and cause more
than necessary zero out, and fill the whole zone prematurely.
- Incorrect physical bytenr passed to fill_writer_pointer_gap()
In scrub_write_sectors(), one call site passes logical address, which
is completely wrong.
The other call site passes physical address of current sector, but
we should pass the physical address of the btrfs_bio we're submitting.
This is the cause of the -EIO errors.
[FIX]
- Do not use ZONE_APPEND for btrfs_submit_repair_write().
- Manually forward sctx->write_pointer after successful writeback
- Use the physical address of the to-be-submitted btrfs_bio for
fill_writer_pointer_gap()
Now zoned device replace would work as expected.
Reported-by: Christoph Hellwig <hch@lst.de>
Fixes: e02ee89baa ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The dma pointer must be set to the passed stream pointer, even
if that pointer is NULL.
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230601124907.3128170-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX98363 does not support 32bit depth audio.
Removed 32bit from the supported format list.
Instead, added 16bit and 24bit to the list.
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Link: https://lore.kernel.org/r/20230601130600.25344-1-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Put all the debugging output behind "mtrr=debug" and get rid of
"mtrr_cleanup_debug" which wasn't even documented anywhere.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230531174857.GDZHeIib57h5lT5Vh1@fat_crate.local
mtrr_centaur_report_mcr() isn't used by anyone, so it can be removed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-17-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Today pud_set_huge() and pmd_set_huge() test for the MTRR type to be
WB or INVALID after calling mtrr_type_lookup().
Those tests can be dropped as the only reason not to use a large mapping
would be uniform being 0.
Any MTRR type can be accepted as long as it applies to the whole memory
range covered by the mapping, as the alternative would only be to map
the same region with smaller pages instead, using the same PAT type as
for the large mapping.
[ bp: Massage commit message. ]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-16-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
mtrr_type_lookup() should always return a valid memory type. In case
there is no information available, it should return the default UC.
This will remove the last case where mtrr_type_lookup() can return
MTRR_TYPE_INVALID, so adjust the comment in include/uapi/asm/mtrr.h.
Note that removing the MTRR_TYPE_INVALID #define from that header
could break user code, so it has to stay.
At the same time the mtrr_type_lookup() stub for the !CONFIG_MTRR
case should set uniform to 1, as if the memory range would be
covered by no MTRR at all.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-15-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Instead of crawling through the MTRR register state, use the new
cache_map for looking up the cache type(s) of a memory region.
This allows now to set the uniform parameter according to the
uniformity of the cache mode of the region, instead of setting it
only if the complete region is mapped by a single MTRR. This now
includes even the region covered by the fixed MTRR registers.
Make sure uniform is always set.
[ bp: Massage. ]
[ jgross: Explain mtrr_type_lookup() logic. ]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-14-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Add a new command line option "mtrr=debug" for getting debug output
after building the new cache mode map. The output will include MTRR
register values and the resulting map.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-13-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
After MTRR initialization construct a memory map with cache modes from
MTRR values. This will speed up lookups via mtrr_lookup_type()
especially in case of overlapping MTRRs.
This will be needed when switching the semantics of the "uniform"
parameter of mtrr_lookup_type() from "only covered by one MTRR" to
"memory range has a uniform cache mode", which is the data the callers
really want to know. Today this information is not easily available,
in case MTRRs are not well sorted regarding base address.
The map will be built in __initdata. When memory management is up, the
map will be moved to dynamically allocated memory, in order to avoid
the need of an overly large array. The size of this array is calculated
using the number of variable MTRR registers and the needed size for
fixed entries.
Only add the map creation and expansion for now. The lookup will be
added later.
When writing new MTRR entries in the running system rebuild the map
inside the call from mtrr_rendezvous_handler() in order to avoid nasty
race conditions with concurrent lookups.
[ bp: Move out rebuild_map() call and rename it. ]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-12-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Add a service function for obtaining the effective cache mode of
overlapping MTRR registers.
Make use of that function in check_type_overlap().
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-11-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The mtrr_value[] array is a static variable which is used only in a few
configurations. Consuming 6kB is ridiculous for this case, especially as
the array doesn't need to be that large and it can easily be allocated
dynamically.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-10-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
There is some code in mtrr.c which is relevant for old 32-bit CPUs
only. Move it to a new source legacy.c.
While modifying mtrr_init_finalize() fix spelling of its name.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-9-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Today there are two variants of set_mtrr(): one calling stop_machine()
and one calling stop_machine_cpuslocked().
The first one (set_mtrr()) has only one caller, and this caller is
running only when resuming from suspend when the interrupts are still
off and only one CPU is active. Additionally this code is used only on
rather old 32-bit CPUs not supporting SMP.
For these reasons the first variant can be replaced by a simple call of
mtrr_if->set().
Rename the second variant set_mtrr_cpuslocked() to set_mtrr() now that
there is only one variant left, in order to have a shorter function
name.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-8-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Modern CPUs all share the same MTRR interface implemented via
generic_mtrr_ops.
At several places in MTRR code this generic interface is deduced via
is_cpu(INTEL) tests, which is only working due to X86_VENDOR_INTEL
being 0 (the is_cpu() macro is testing mtrr_if->vendor, which isn't
explicitly set in generic_mtrr_ops).
Test the generic CPU feature X86_FEATURE_MTRR instead.
The only other place where the .vendor member of struct mtrr_ops is
being used is in set_num_var_ranges(), where depending on the vendor
the number of MTRR registers is determined. This can easily be changed
by replacing .vendor with the static number of MTRR registers.
It should be noted that the test "is_cpu(HYGON)" wasn't ever returning
true, as there is no struct mtrr_ops with that vendor information.
[ bp: Use mtrr_enabled() before doing mtrr_if-> accesses, esp. in
mtrr_trim_uncached_memory() which gets called independently from
whether mtrr_if is set or not. ]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230502120931.20719-7-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
When running as Xen PV initial domain (aka dom0), MTRRs are disabled
by the hypervisor, but the system should nevertheless use correct
cache memory types. This has always kind of worked, as disabled MTRRs
resulted in disabled PAT, too, so that the kernel avoided code paths
resulting in inconsistencies. This bypassed all of the sanity checks
the kernel is doing with enabled MTRRs in order to avoid memory
mappings with conflicting memory types.
This has been changed recently, leading to PAT being accepted to be
enabled, while MTRRs stayed disabled. The result is that
mtrr_type_lookup() no longer is accepting all memory type requests,
but started to return WB even if UC- was requested. This led to
driver failures during initialization of some devices.
In reality MTRRs are still in effect, but they are under complete
control of the Xen hypervisor. It is possible, however, to retrieve
the MTRR settings from the hypervisor.
In order to fix those problems, overwrite the MTRR state via
mtrr_overwrite_state() with the MTRR data from the hypervisor, if the
system is running as a Xen dom0.
Fixes: 72cbc8f04f ("x86/PAT: Have pat_enabled() properly reflect state when running on Xen")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-6-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
In order to avoid mappings using the UC- cache attribute, set the
MTRR state to use WB caching as the default.
This is needed in order to cope with the fact that PAT is enabled,
while MTRRs are not supported by the hypervisor.
Fixes: 90b926e68f ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230502120931.20719-5-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
When running virtualized, MTRR access can be reduced (e.g. in Xen PV
guests or when running as a SEV-SNP guest under Hyper-V). Typically, the
hypervisor will not advertize the MTRR feature in CPUID data, resulting
in no MTRR memory type information being available for the kernel.
This has turned out to result in problems (Link tags below):
- Hyper-V SEV-SNP guests using uncached mappings where they shouldn't
- Xen PV dom0 mapping memory as WB which should be UC- instead
Solve those problems by allowing an MTRR static state override,
overwriting the empty state used today. In case such a state has been
set, don't call get_mtrr_state() in mtrr_bp_init().
The set state will only be used by mtrr_type_lookup(), as in all other
cases mtrr_enabled() is being checked, which will return false. Accept
the overwrite call only for selected cases when running as a guest.
Disable X86_FEATURE_MTRR in order to avoid any MTRR modifications by
just refusing them.
[ bp: Massage. ]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/all/4fe9541e-4d4c-2b2a-f8c8-2d34a7284930@nerdbynature.de/
Link: https://lore.kernel.org/lkml/BYAPR21MB16883ABC186566BD4D2A1451D7FE9@BYAPR21MB1688.namprd21.prod.outlook.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Replace size_or_mask and size_and_mask with the much easier concept of
high reserved bits.
While at it, instead of using constants in the MTRR code, use some new
[ bp:
- Drop mtrr_set_mask()
- Unbreak long lines
- Move struct mtrr_state_type out of the uapi header as it doesn't
belong there. It also fixes a HDRTEST breakage "unknown type name ‘bool’"
as Reported-by: kernel test robot <lkp@intel.com>
- Massage.
]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230502120931.20719-3-jgross@suse.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Commit 84a9582fd2 ("serial: core: Start managing serial controllers to
enable runtime PM") required the caller to hold port_mutex rather than
taking it locally. However the mutex_unlock() call wasn't removed
causing the mutex to be dropped unexpectly. Remove the call to
mutex_unlock() (and fix up the early return) to restore correct
behaviour.
Fixes: 84a9582fd2 ("serial: core: Start managing serial controllers to enable runtime PM")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230601105548.29965-1-steven.price@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a direct I/O write is performed, iomap_dio_rw() invalidates the
part of the page cache which the write is going to before carrying out
the write. In the odd case, the direct I/O write will be reading from
the same page it is writing to. gfs2 carries out writes with page
faults disabled, so it should have been obvious that this page
invalidation can cause iomap_dio_rw() to never make any progress.
Currently, gfs2 will end up in an endless retry loop in
gfs2_file_direct_write() instead, though.
Break this endless loop by limiting the number of retries and falling
back to buffered I/O after that.
Also simplify should_fault_in_pages() sightly and add a comment to make
the above case easier to understand.
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add reset GPIO support. The reset GPIO is cleared after supply regulator
was enabled, and set before supply regulator is disabled.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530192805.648646-2-marex@denx.de
This chip has one reset GPIO input, document it. The reset GPIO
is optional as it is sometimes not connected on some hardware.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530192805.648646-1-marex@denx.de
* Fix ata_find_dev() use of the device number to find a struct
ata_device for a port. This addresses issues with some passthrough
commands with libsas managed devices.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZHfsAwAKCRDdoc3SxdoY
dvi6AQD3Bi4Nd/elG5pZ1UwVHluH9snI3CZFKXrEboygeCgMVAEA0eKtIJlIb8Le
SttinbdcCIqjkixdRFaGNZH1+gKmEAc=
=57Cw
-----END PGP SIGNATURE-----
Merge tag 'ata-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Fix ata_find_dev() use of the device number to find a struct
ata_device for a port. This addresses issues with some passthrough
commands with libsas managed devices.
* tag 'ata-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-scsi: Use correct device no in ata_find_dev()
-----BEGIN PGP SIGNATURE-----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=dtcd
-----END PGP SIGNATURE-----
Merge tag '6.4-rc4-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Eight server fixes (most also for stable):
- Two fixes for uninitialized pointer reads (rename and link)
- Fix potential UAF in oplock break
- Two fixes for potential out of bound reads in negotiate
- Fix crediting bug
- Two fixes for xfstests (allocation size fix for test 694 and lookup
issue shown by test 464)"
* tag '6.4-rc4-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: call putname after using the last component
ksmbd: fix incorrect AllocationSize set in smb2_get_info
ksmbd: fix UAF issue from opinfo->conn
ksmbd: fix multiple out-of-bounds read during context decoding
ksmbd: fix slab-out-of-bounds read in smb2_handle_negotiate
ksmbd: fix credit count leakage
ksmbd: fix uninitialized pointer read in smb2_create_link()
ksmbd: fix uninitialized pointer read in ksmbd_vfs_rename()
David Howells says:
====================
splice, net: Handle MSG_SPLICE_PAGES in Chelsio-TLS
Here are patches to make Chelsio-TLS handle the MSG_SPLICE_PAGES internal
sendmsg flag. MSG_SPLICE_PAGES is an internal hint that tells the protocol
that it should splice the pages supplied if it can. Its sendpage
implementation is then turned into a wrapper around that.
====================
Link: https://lore.kernel.org/r/20230531110008.642903-1-dhowells@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert chtls_sendpage() to use sendmsg() with MSG_SPLICE_PAGES rather than
directly splicing in the pages itself.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ayush Sawal <ayush.sawal@chelsio.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: netdev@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make Chelsio's TLS offload sendmsg() support MSG_SPLICE_PAGES, splicing in
pages from the source iterator if possible and copying the data in
otherwise.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ayush Sawal <ayush.sawal@chelsio.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: netdev@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
