Mengyuan Lou says:
====================
Wangxun netdev features support
Implement tx_csum and rx_csum to support hardware checksum offload.
Implement ndo_vlan_rx_add_vid and ndo_vlan_rx_kill_vid.
Implement ndo_set_features.
Enable macros in netdev features which wangxun can support.
====================
Link: https://lore.kernel.org/r/20230530022632.17938-1-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add features and hw_features that ngbe can support.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add features and hw_features that ngbe can support.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement wx_set_features function which to support
ndo_set_features.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement vlan add/kill functions which add and remove
vlan id in hardware.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add rx offload functions for wx_clean_rx_irq
which supports ngbe and txgbe to implement
rx offload function.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tx offload functions for wx_xmit_frame_ring which
includes wx_encode_tx_desc_ptype, wx_tso and wx_tx_csum.
which supports ngbe and txgbe to implement tx offload
function.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devlink health is involved in error recovery. Machines in bad
state tend to be fairly unreliable, and occasionally get stuck
in error loops. Even with a reasonable grace period devlink health
may get a thousand reports in an hour.
In case of reporting on an unregistered devlink instance
the subsequent reports don't add much value. Switch to
WARN_ON_ONCE() to avoid flooding dmesg and fleet monitoring
dashboards.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230531015523.48961-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Harini Katakam says:
====================
Add support for VSC85xx DT RGMII delays
Provide an option to change RGMII delay value via devicetree.
====================
Link: https://lore.kernel.org/r/20230529122017.10620-1-harini.katakam@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for optional rx/tx-internal-delay-ps from devicetree.
- When rx/tx-internal-delay-ps is/are specified, these take priority
- When either is absent,
1) use 2ns for respective settings if rgmii-id/rxid/txid is/are present
2) use 0.2ns for respective settings if mode is rgmii
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the PHY devices variants specified have the same mask and
hence can be simplified to one vendor look up for 0x00070400.
Any individual config can be identified by PHY_ID_MATCH_EXACT
in the respective structure.
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Failure ladders weren't exactly unwinding what the function had done up
to that point; most seriously, when we encountered an already offloaded
rule, the failure path tried to remove the new rule from the hashtable,
which would in fact remove the already-present 'old' rule (since it has
the same key) from the table, and leak its resources.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202305200745.xmIlkqjH-lkp@intel.com/
Fixes: d902e1a737 ("sfc: bare bones TC offload on EF100")
Fixes: 17654d84b4 ("sfc: add offloading of 'foreign' TC (decap) rules")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230530202527.53115-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If PREEMPT_RT is set, then assume that the user focuses on minimum
latency. Therefore don't set sw irq coalescing defaults.
This affects the defaults only, users can override these settings
via sysfs.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/f9439c7f-c92c-4c2c-703e-110f96d841b7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During driver load it reads embedded_cpu bit from initialization
segment, but the initialization segment is readable only after
initialization bit is cleared.
Move the call to mlx5_read_embedded_cpu() right after initialization bit
cleared.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Fixes: 591905ba96 ("net/mlx5: Introduce Mellanox SmartNIC and modify page management logic")
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Allocation failure is outside the critical lock section and should
return immediately rather than jumping to the unlock section.
Also unlock as soon as required and remove the now redundant jump label.
Fixes: 80a2a9026b ("net/mlx5e: Add a lock on tir list")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When dynamic IRQ allocation is not supported all IRQs are allocated up
front in mlx5_irq_table_create() instead of dynamically as part of
mlx5_irq_alloc(). In the latter dynamic case irq->map.index is set
via the mapping returned by pci_msix_alloc_irq_at(). In the static case
and prior to commit 1da438c0ae ("net/mlx5: Fix indexing of mlx5_irq")
irq->map.index was set in mlx5_irq_alloc() twice once initially to 0 and
then to the requested index before storing in the xarray. After this
commit it is only set to 0 which breaks all other IRQ mappings.
Fix this by setting irq->map.index to the requested index together with
irq->map.virq and improve the related comment to make it clearer which
cases it deals with.
Cc: Chuck Lever III <chuck.lever@oracle.com>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Fixes: 1da438c0ae ("net/mlx5: Fix indexing of mlx5_irq")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add IP GC 11.0.1 in the list of target to have
tmz enabled by default.
Signed-off-by: Ikshwaku Chauhan <ikshwaku.chauhan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
All UFS host drivers call ufshcd_shutdown(). Hence, instead of calling
ufshcd_shutdown() from the host driver .shutdown() callback, inline that
function into ufshcd_wl_shutdown().
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230524203659.1394307-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the definition of ufshcd_wl_shutdown() to make the next patch in this
series easier to review.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230524203659.1394307-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_queuecommand() may be called two times in a row for a SCSI command
before it is completed. Hence make the following changes:
- In the functions that submit a command, do not check the old value of
lrbp->cmd nor clear lrbp->cmd in error paths.
- In ufshcd_release_scsi_cmd(), do not clear lrbp->cmd.
See also scsi_send_eh_cmnd().
This commit prevents that the following appears if a command times out:
WARNING: at drivers/ufs/core/ufshcd.c:2965 ufshcd_queuecommand+0x6f8/0x9a8
Call trace:
ufshcd_queuecommand+0x6f8/0x9a8
scsi_send_eh_cmnd+0x2c0/0x960
scsi_eh_test_devices+0x100/0x314
scsi_eh_ready_devs+0xd90/0x114c
scsi_error_handler+0x2b4/0xb70
kthread+0x16c/0x1e0
Fixes: 5a0b0cb9be ("[SCSI] ufs: Add support for sending NOP OUT UPIU")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230524203659.1394307-3-bvanassche@acm.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
One UFS vendor asked to increase the UFS timeout from 1 s to 3 s. Another
UFS vendor asked to increase the UFS timeout from 1 s to 10 s. Hence this
patch that increases the UFS timeout to 10 s. This patch can cause the
total timeout to exceed 20 s, the Android shutdown timeout. This is fine
since the loop around ufshcd_execute_start_stop() exists to deal with unit
attentions and because unit attentions are reported quickly.
Fixes: dcd5b7637c ("scsi: ufs: Reduce the START STOP UNIT timeout")
Fixes: 8f2c96420c ("scsi: ufs: core: Reduce the power mode change timeout")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230524203659.1394307-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copy the sense data to internal driver buffer when the firmware completes
any SCSI I/O command sent through admin queue with sense data for further
use.
Fixes: 506bc1a0d6 ("scsi: mpi3mr: Add support for MPT commands")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20230531184025.3803-1-sumit.saxena@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for error handling for MCQ mode.
Suggested-by: Can Guo <quic_cang@quicinc.com>
Co-developed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/f0d923ee1f009f171a55c258d044e814ec0917ab.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for adding MCQ error handler support, update the MCQ code to
use the ufshcd_mcq_poll_cqe_lock() in interrupt context instead of using
ufshcd_mcq_poll_cqe_nolock(). This is to keep synchronization between MCQ
interrupt and error handler contexts because both need to access the MCQ
hardware in separate contexts.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/6ae727ad2a4040469b8f0632b55e0577d80da11b.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add ufshcd_mcq_abort() to support UFS abort in MCQ mode.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/c80c0adadf09ac1d909ed53b36d54737f62c2332.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update ufshcd_clear_cmd() to clean up the MCQ resources similar to the
function ufshcd_utrl_clear() does for SDB mode.
Update ufshcd_try_to_abort_task() to support MCQ mode so that this function
can be invoked in either mcq or SDB mode.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/dc6d30b3ee55e2072c162b2c08504ba349b87139.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add supporting functions to handle UFS abort in MCQ mode.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/d452c5ad62dc863cc067ec82daa0885ec98bd508.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the ufshcd_clear_cmds(), the 2nd parameter would be the bit mask of the
command to be cleared in the transfer request door bell register. This bit
mask mechanism does not scale well in MCQ mode when the queue depth becomes
much greater than 64. Change the 2nd parameter to the function to be the
task_tag number of the corresponding bit to be cleared in the door bell
register. By doing so, MCQ mode with a large queue depth can reuse this
function.
Since the behavior of this function is changed from handling multiple
commands into a single command, rename ufshcd_clear_cmds() into
ufshcd_clear_cmd().
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/8411fb5363acc90519bced30ea2c2ac582ff2340.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UTP command descriptor base address is a 57-bit field in the UTP
transfer request descriptor. Combine the two 32-bit
command_desc_base_addr_lo/hi fields into a 64-bit for better handling of
this field.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/4e6f7f5a15000cdae77c3014b477264f57bf572c.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While the function documentation for ata_eh_qc_retry() is clear,
from simply reading the single function that calls ata_eh_qc_retry(),
it is not clear that ata_eh_qc_retry() might not retry the command.
Add a comment in the single function that calls ata_eh_qc_retry() to
clarify the behavior.
[Damien] Added curly braces to "if () else" with multi-line comment.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Add fatal error checking for the pm8001_phy_control() and
pm8001_lu_reset() functions.
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Pranav Prasad <pranavpp@google.com>
Link: https://lore.kernel.org/r/20230526235155.433243-1-pranavpp@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not
being declared. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230522105049.1467313-32-schnelle@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not
being declared. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230522105049.1467313-22-schnelle@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=UVOh
-----END PGP SIGNATURE-----
Merge tag '6.4-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Four small smb3 client fixes:
- two small fixes suggested by kernel test robot
- small cleanup fix
- update Paulo's email address in the maintainer file"
* tag '6.4-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: address unused variable warning
smb: delete an unnecessary statement
smb3: missing null check in SMB2_change_notify
smb3: update a reviewer email in MAINTAINERS file
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.2.0.13
This patch set contains discovery bug fixes, firmware logging
improvements, clean up of CQ handling, and statistics collection
enhancements.
The patches were cut against Martin's 6.5/scsi-queue tree.
Link: https://lore.kernel.org/r/20230523183206.7728-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Various improvements are made for collecting congestion statistics:
- Pre-existing logic is replaced with use of an hrtimer for increased
reporting accuracy.
- Congestion timestamp information is reorganized into a single struct.
- Common statistic collection logic is refactored into a helper routine.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is mishandling of SLI-4 CQE status values larger than what is allowed
by the LPFC_IOCB_STATUS_MASK of 4 bits. The LPFC_IOCB_STATUS_MASK is a
leftover SLI-3 construct and serves no purpose in SLI-4 path.
Remove the LPFC_IOCB_STATUS_MASK and clean up general CQE status handling
in SLI-4 completion paths.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A firmware upgrade does not necessitate dumping of phba->dbg_log[] to kmsg
via LOG_TRACE_EVENT. A simple KERN_NOTICE log message should suffice to
notify the user of successful or unsuccessful firmware upgrade. As such,
firmware upgrade log messages are updated to use KERN_NOTICE instead of
LOG_TRACE_EVENT. Additionally, in order to notify the user of reset type
for instantiating newly downloaded firmware, lpfc_log_msg's default
KERN_LEVEL is updated to 5 or KERN_NOTICE.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When NPIV ports are zoned to devices that support both initiator and target
mode, a remote device's initiated PRLI results in unintended final kref
clean up of the device's ndlp structure. This disrupts NPIV ports'
discovery for target devices that support both initiator and target mode.
Modify the NPIV lpfc_drop_node clause such that we allow the ndlp to live
so long as it was in NLP_STE_PLOGI_ISSUE, NLP_STE_REG_LOGIN_ISSUE, or
NLP_STE_PRLI_ISSUE nlp_state. This allows lpfc's issued PRLI completion
routine to determine if the final kref clean up should execute rather than
a remote device's issued PRLI.
Fixes: db651ec225 ("scsi: lpfc: Correct used_rpi count when devloss tmo fires with no recovery")
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pre-existing device loss recovery logic via the NLP_IN_RECOV_POST_DEV_LOSS
flag only handled Fabric Port Login, Fabric Controller, Management, and
Name Server addresses.
Fabric domain controllers fall under the same category for usage of the
NLP_IN_RECOV_POST_DEV_LOSS flag. Add a default case statement to mark an
ndlp for device loss recovery.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-4-justintee8345@gmail.com
Acked-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
