When CONFIG_SYSFS is not enabled provide stubs for the helper functions
to not break their callers.
Fixes: 539b9c94ac ("power: supply: add helpers for charge_behaviour sysfs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20220108153158.189489-1-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix leaking the registered gpiod_lookup tables when the kcalloc() for the
i2c_clients array fails.
Fixes: ef2ac11493 ("platform/x86: x86-android-tablets: Add support for registering GPIO lookup tables")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220108154947.136593-1-hdegoede@redhat.com
The Surface Go 3 needs some board data in order to configure the
TPS68470 PMIC - add entries to the tables in tps68470_board_data.c
that define the configuration that's needed.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20220106232045.41291-1-djrscally@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a driver for the keyboard, touchpad and USB port of
the keyboard dock for the Asus TF103C 2-in-1 tablet.
This keyboard dock has its own I2C attached embedded controller
and the keyboard and touchpad are also connected over I2C,
instead of using the usual USB connection. This means that the
keyboard dock requires this special driver to function.
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Ion Agorria <ion@agorria.com>
Cc: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211226141849.156407-1-hdegoede@redhat.com
The whitelabel (sold as various brands) TM800A550L tablets's DSDT contains
a whole bunch of bogus ACPI I2C devices and the ACPI node describing
the touchscreen is bad (the IRQ is missing). Enumeration of these is
skipped through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the (now) missing I2C devices by
adding the necessary device info to the x86-android-tablets module,
including instantiating an actually working i2c-client for
the touchscreen.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-13-hdegoede@redhat.com
Asus MeMO Pad 7 ME176C tablets have an Android factory img with everything
hardcoded in the kernel instead of properly described in the DSDT.
Add support for manually instantiating all the missing I2C devices by
adding the necessary device info to the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-12-hdegoede@redhat.com
Asus TF103C tablets have an Android factory img with everything hardcoded
in the kernel instead of properly described in the DSDT.
Add support for manually instantiating all the missing I2C devices by
adding the necessary device info to the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-11-hdegoede@redhat.com
Since the x86-android-tablets code does all it work from module_init() it
cannot use -EPROBE_DEFER to wait for e.g. interrupt providing GPIO-chips
or PMIC-cells to show up.
To make sure things will still work when some necessary resource providers
are build as module allow the per board info to specify a list of modules
to pre-load before instantiating the I2C clients.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-10-hdegoede@redhat.com
Add support for instantiating platform-devs, note this also makes some
small changes to the i2c_client instantiating code to make the 2 flows
identical.
Specifically for the pdevs flow pdev_count must only be set after
allocating the pdevs array, to avoid a NULL ptr deref in
x86_android_tablet_cleanup() and the i2c_clients flow is updated
to work the same way.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-7-hdegoede@redhat.com
The Crystal Cove PMIC has a pin which can be used to connect the IRQ of
an external charger IC. On some boards this is used so we need a way to
look this up.
Note that the Intel PMICs have 2 levels of interrupts and thus
2 levels of IRQ domains all tied to a single fwnode.
Level 1 is the irqchip which demultiplexes the actual PMIC interrupt into
interrupts for the various MFD cells. Level 2 are the irqchips used in the
cell drivers which themselves export IRQs, such as the crystal_cove_gpio
driver, which de-multiplexes the level 2 interrupts for the GPIOs into
individual per GPIO IRQs.
The crystal_cove_charger driver registers an irqchip with a single IRQ for
the charger driver to consume. Note the MFD cell IRQ cannot be consumed
directly because the level 2 interrupts must be explicitly acked.
To allow finding the right IRQ domain when looking up the IRQ for
the charger, the crystal_cove_charger driver sets a DOMAIN_BUS_WIRED token
on its IRQ domain.
Add support for looking up the IRQ from the crystal_cove_charger driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-6-hdegoede@redhat.com
The x86-android-tablets code all runs from module_init, so returning
-EPROBE_DEFER is not appropriate. Instead log an error and bail.
This path should never get hit since PINCTRL_BAYTRAIL is a bool.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-5-hdegoede@redhat.com
The Glavey TM800A550L tablet is a tablet which ships with Android as
factory OS. As such it has the typical broken DSDT which x86 Android
tablets tend to have.
Specifically the touchscreen ACPI device node is missing the IRQ for
the touchscreen. So far users were expected to fix this with a DSDT
overlay, but support for the TM800A550L has been added to the new
x86-android-modules kernel-module and that will now automatically
instantiate a proper i2c-client with the IRQ set for the touchscreen,
including the necessary device-properties for the firmware loading.
This means that the touchscreen_dmi entry for the TM800A550L is
no longer necessary (and it no longer matches either since the
touchscreen is no longer enumerated through ACPI), remove it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220103112700.111414-1-hdegoede@redhat.com
Both the Chuwi Hi10 Plus (CWI527) and the Chuwi Hi10 Pro (CWI529) tablets
support being used together with the Hi H2 pen.
Add the necessary properties to enable the new support for this in the
silead touchscreen driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211225120247.95380-2-hdegoede@redhat.com
The firmware distributed as part of the Windows and Android drivers uses
significantly different min and max values for the x- and y-axis,
compared to the EFI's embedded touchscreen firmware.
The difference is large enough that e.g. typing on an onscreen keyboard
results in the wrong "keys" getting pressed.
Adjust the values to match those of the firmware distributed with the
Windows and Android drivers (which is necessary for pen support) and
put the EFI-fw version's min/max values in the new "silead,efi-fw-min-max"
property. The silead driver will use these when it is using the
EFI embedded firmware, so as to not regress functionality in that case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211225120247.95380-1-hdegoede@redhat.com
Driver for the external-charger IRQ pass-through function of the
Intel Bay Trail Crystal Cove PMIC.
Note this is NOT a power_supply class driver, it just deals with IRQ
pass-through, this requires this separate driver because the PMIC's
level 2 interrupt for this must be explicitly acked.
This new driver gets enabled by the existing X86_ANDROID_TABLETS Kconfig
option because the x86-android-tablets module is the only consumer of the
exported external-charger IRQ.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211225115509.94891-5-hdegoede@redhat.com
All properties have to be added to power_supply_attrs which was missed
before.
Fixes: 1b0b6cc803 ("power: supply: add charge_behaviour attributes")
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20220105064239.2689-1-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the uncore-frequency sysfs code to use default_groups field
which has been the preferred way since aa30f47cf6 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211229141454.2552950-1-gregkh@linuxfoundation.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the uv sysfs code to use default_groups field which has
been the preferred way since aa30f47cf6 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: Justin Ernst <justin.ernst@hpe.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211229141332.2552428-1-gregkh@linuxfoundation.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
x86 tablets which ship with Android as (part of) the factory image
typically have various problems with their DSDTs. The factory kernels
shipped on these devices typically have device addresses and GPIOs
hardcoded in the kernel, rather then specified in their DSDT.
With the DSDT containing a random collection of devices which may or
may not actually be present as well as missing devices which are
actually present.
This driver, which loads only on affected models based on DMI matching,
adds DMI based instantiating of kernel devices for devices which are
missing from the DSDT, fixing e.g. battery monitoring, touchpads and/or
accelerometers not working.
Note the Kconfig help text also refers to "various fixes" ATM there are
no such fixes, but there are also known cases where entries are present
in the DSDT but they contain bugs, such as missing/wrong GPIOs. The plan
is to also add fixes for things like this here in the future.
This is the least ugly option to get these devices to fully work and to
do so without adding any extra code to the main kernel image (vmlinuz)
when built as a module.
Link: https://lore.kernel.org/platform-driver-x86/20211031162428.22368-1-hdegoede@redhat.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211223190750.397487-1-hdegoede@redhat.com
This release adds following change:
- Update max performance when BIOS disabled turbo
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When BIOS disables turbo, the cpuinfo_max_freq will also be same as the
power up base frequency. When SST-PP causes increase in base frequency
the performance will be still limited to the old base frequency as the
cpuinfo_max_freq will not be updated.
In this case we need to update scaling_max frequency to the new
base_frequency. This will result in setting updated max performance
limit in the Pstate driver. So performance will not be limited to the
old base frequency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In case device registration fails during module initialisation, the
platform device structure needs to be freed using platform_device_put()
to properly free all resources (e.g. the device name).
Fixes: 938835aa90 ("platform/x86: intel_pmc_core: do not create a static struct device")
Cc: stable@vger.kernel.org # 5.9
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211222105023.6205-1-johan@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Siemens industrial PCs unfortunately can not always be properly
identified the way we used to. An earlier commit introduced code that
allows proper identification without looking at DMI strings that could
differ based on product branding.
Switch over to that proper way and revert commits that used to collect
the machines based on unstable strings.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Fixes: e8796c6c69 ("platform/x86: pmc_atom: Add Siemens CONNECT ...")
Fixes: f110d252ae ("platform/x86: pmc_atom: Add Siemens SIMATIC ...")
Fixes: ad0d315b4d ("platform/x86: pmc_atom: Add Siemens SIMATIC ...")
Tested-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20211213120502.20661-5-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This driver adds initial support for several devices from Siemens. It is
based on a platform driver introduced in an earlier commit.
One of the supported machines does access a GPIO pin to enable the
watchdog. Here we poke GPIO memory because pinctrl does not come up.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211213120502.20661-4-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This driver adds initial support for several devices from Siemens. It is
based on a platform driver introduced in an earlier commit.
One of the supported machines has GPIO connected LEDs, here we poke GPIO
memory directly because pinctrl does not come up.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Link: https://lore.kernel.org/r/20211213120502.20661-3-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This mainly implements detection of these devices and will allow
secondary drivers to work on such machines.
The identification is DMI-based with a vendor specific way to tell them
apart in a reliable way.
Drivers for LEDs and Watchdogs will follow to make use of that platform
detection.
There is also some code to allow secondary drivers to find GPIO memory,
that needs to be in place because the pinctrl drivers do not come up.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20211213120502.20661-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
While introduction of this menu brings a nice view in the configuration tools,
it brought more issues than solves, i.e. it prevents to locate files in the
intel/ subfolder without touching non-related Kconfig dependencies elsewhere.
Drop X86_PLATFORM_DRIVERS_INTEL altogether.
Note, on x86 it's enabled by default and it's quite unlikely anybody wants to
disable all of the modules in this submenu.
Fixes: 8bd836feb6 ("platform/x86: intel_skl_int3472: Move to intel/ subfolder")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211222194941.76054-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Certain functionality or its implementation in System76 EC firmware may
be different to the proprietary ODM EC firmware. Introduce a new bool,
`has_open_ec`, to guard our specific logic. Detect the use of this by
looking for a custom ACPI method name used in System76 firmware.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://lore.kernel.org/r/20211222185154.4560-1-tcrawford@system76.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There are as many as needed MODULE_AUTHOR() macro entries allowed
in the single driver. Split author list to a few macro entries.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211210163009.19894-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
For easy grepping on debug purposes join string literals back in
the messages.
No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211210163009.19894-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There needs to be a check to prevent negative offsets for
setting->index. I have reviewed this code and I think that the
"if (block->instance_count <= instance)" check in __query_block() will
prevent this from resulting in an out of bounds access. But it's
still worth fixing.
Fixes: 640a5fa50a ("platform/x86: think-lmi: Opcode support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211217071209.GF26548@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This should be (res->end - res->start + 1) here actually,
use resource_size() derectly.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1639484316-75873-1-git-send-email-wangqing@vivo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This driver is intended to be used exclusively for suspend to idle
so callbacks to send OS_HINT during hibernate and S5 will set OS_HINT
at the wrong time leading to an undefined behavior.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211210143529.10594-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The devm_ioremap() function returns NULL on error, it doesn't return
error pointers. Also according to doc of device_property_read_u64_array,
values in info array are properties of device or NULL.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20211210070753.10761-1-linmq006@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
STB (Smart Trace Buffer), is a debug trace buffer that isolates the
failures by analyzing the last running feature of a system. This
non-intrusive way always runs in the background and stores the trace
into the SoC.
This patch enables the STB feature by passing module param
"enable_stb=1" while loading the driver and provides mechanism to
access the STB buffer using the read and write routines.
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Link: https://lore.kernel.org/r/20211130112318.92850-3-Sanket.Goswami@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Handle error-exits in the amd_pmc_probe() to avoid duplication and store
the root port information in amd_pmc_probe() so that the information
can be used across multiple routines.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Link: https://lore.kernel.org/r/20211130112318.92850-2-Sanket.Goswami@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This adds support for the inhibit-charge charge_behaviour through the
embedded controller of ThinkPads.
Co-developed-by: Thomas Koch <linrunner@gmx.net>
Signed-off-by: Thomas Koch <linrunner@gmx.net>
Co-developed-by: Nicolò Piazzalunga <nicolopiazzalunga@gmail.com>
Signed-off-by: Nicolò Piazzalunga <nicolopiazzalunga@gmail.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20211123232704.25394-5-linux@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This adds support for the force-discharge charge_behaviour through the
embedded controller of ThinkPads.
Co-developed-by: Thomas Koch <linrunner@gmx.net>
Signed-off-by: Thomas Koch <linrunner@gmx.net>
Co-developed-by: Nicolò Piazzalunga <nicolopiazzalunga@gmail.com>
Signed-off-by: Nicolò Piazzalunga <nicolopiazzalunga@gmail.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20211123232704.25394-4-linux@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
These helper functions can be used by drivers to implement their own
sysfs-attributes.
This is useful for ACPI-drivers extending the default ACPI-battery with
their own charge_behaviour attributes.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20211123232704.25394-3-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This branch contains 5.16-rc1 + the pending ACPI/i2c, tps68570 platform_data
and INT3472 driver patches.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmG6YLQUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zwGwf8Csb4wXyc3duBlnX/9jO9REDVKTN9
HhmU2KQm29g10dN2nlFXEOG16xAy8zt3BE7QwniL/R5sUsKTCAEugY8Aqq/4+lFA
vTU+YR9YqZFmEDGMfDngHeh9ZvSWIJS7IEXthxCkgGVhrd2Wl50jKTjVyq1RIDKv
a7B4fOhguFv95xRlnXK+yoVUU7zZPWAgxyCqV0E0JEi8aWE8Y483IRCzcDEyJeDa
HkgZLVwD9l3WQ4uZllVg1q5jfSprHwBa8dFxgcd6mOOYaKowiJ+GjnvnXOto5X72
zsODBJH15VzfVXF5cAqIvzN6nAFR8Mxieei+21iFyUD/Ps1vfWlodFHH2w==
=Q1N9
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-int3472-1' into review-hans
Signed tag for the immutable platform-drivers-x86-int3472 branch
This branch contains 5.16-rc1 + the pending ACPI/i2c, tps68570 platform_data
and INT3472 driver patches.
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around this info missing from the ACPI tables on devices where
the int3472 driver is used, the int3472 MFD-cell drivers attach info about
consumers to the clks/regulators when registering these.
This causes problems with the probe ordering wrt drivers for consumers
of these clks/regulators. Since the lookups are only registered when the
provider-driver binds, trying to get these clks/regulators before then
results in a -ENOENT error for clks and a dummy regulator for regulators.
All the sensor ACPI fw-nodes have a _DEP dependency on the INT3472 ACPI
fw-node, so to work around these probe ordering issues the ACPI core /
i2c-code does not instantiate the I2C-clients for any ACPI devices
which have a _DEP dependency on an INT3472 ACPI device until all
_DEP-s are met.
This relies on acpi_dev_clear_dependencies() getting called by the driver
for the _DEP-s when they are ready, add a acpi_dev_clear_dependencies()
call to the discrete.c probe code.
In the tps68470 case calling acpi_dev_clear_dependencies() is already done
by the acpi_gpiochip_add() call done by the driver for the GPIO MFD cell
(The GPIO cell is deliberately the last cell created to make sure the
clk + regulator cells are already instantiated when this happens).
However for proper probe ordering, the clk/regulator cells must not just
be instantiated the must be fully ready (the clks + regulators must be
registered with their subsystems).
Add MODULE_SOFTDEP dependencies for the clk and regulator drivers for
the instantiated MFD-cells so that these are loaded before us and so
that they bind immediately when the platform-devs are instantiated.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-12-hdegoede@redhat.com
Pass tps68470_regulator_platform_data to the tps68470-regulator
MFD-cell, specifying the voltages of the various regulators and
tying the regulators to the sensor supplies so that sensors which use
the TPS68470 can find their regulators.
Since the voltages and supply connections are board-specific, this
introduces a DMI matches int3472_tps68470_board_data struct which
contains the necessary per-board info.
This per-board info also includes GPIO lookup information for the
sensor IO lines which may be connected to the tps68470 GPIOs.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-11-hdegoede@redhat.com
Pass tps68470_clk_platform_data to the tps68470-clk MFD-cell,
so that sensors which use the TPS68470 can find their clock.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-10-hdegoede@redhat.com
The discrete.c code is not the only code which needs to lookup the
acpi_device and device-name for the sensor for which the INT3472
ACPI-device is a GPIO/clk/regulator provider.
The tps68470.c code also needs this functionality, so factor this
out into a new get_sensor_adev_and_name() helper.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-9-hdegoede@redhat.com
The intel_skl_int3472.ko module contains 2 separate drivers,
the int3472_discrete platform driver and the int3472_tps68470
I2C-driver.
These 2 drivers contain very little shared code, only
skl_int3472_get_acpi_buffer() and skl_int3472_fill_cldb() are
shared.
Split the module into 2 drivers, linking the little shared code
directly into both.
This will allow us to add soft-module dependencies for the
tps68470 clk, gpio and regulator drivers to the new
intel_skl_int3472_tps68470.ko to help with probe ordering issues
without causing these modules to get loaded on boards which only
use the int3472_discrete platform driver.
While at it also rename the .c and .h files to remove the
cumbersome intel_skl_int3472_ prefix.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-8-hdegoede@redhat.com
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around cases where this info is not present in the firmware tables,
which is often the case on x86/ACPI devices, both frameworks allow the
provider-driver to attach info about consumers to the provider-device
during probe/registration of the provider device.
The TI TPS68470 PMIC is used x86/ACPI devices with the consumer-info
missing from the ACPI tables. Thus the tps68470-clk and tps68470-regulator
drivers must provide the consumer-info at probe time.
Define tps68470_clk_platform_data and tps68470_regulator_platform_data
structs to allow the x86 platform code to pass the necessary consumer info
to these drivers.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-5-hdegoede@redhat.com
