Expose power2_cap hwmon node for retrieving and configuring ppt1
limit on supported boards for gc_v9_5_0
v2: Remove version check (Lijo)
v3: Remove power2_average (Lijo)
v4: Put back power2_average, will be removed separately (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to configure and retrieve ppt1 limit for smu_v13_0_12
v2: Add update_caps function and update ppt1 cap based on max ppt1
value, optimize the return values (Lijo)
v3: Add Null ptr check, return not supported in case of invalid
level/type (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update pmfw headers for smu_v13_0_12 to include ppt1 messages and
static parameters
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The link detection helpers in dc/link/link_detection.c were missing
kdoc annotations for parameters and return values.
Fixes the below with gcc W=1:
...link_detection.c:872 parameter 'edid_header' not described
...link_detection.c:890 parameter 'link' not described
...link_detection.c:914 parameter 'link' not described
...link_detection.c:1355 parameter 'link' not described
...link_detection.c:1355 parameter 'type' not described
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds the missing @aconnector, @connector, and @force descriptions:
@aconnector – This is the DM (Display Manager) connector. It gives
access to the DRM connector, the DC link, and hotplug/poll state. The
code uses it to check the link, update the sink, and manage connector
state changes.
@connector – This is the main DRM connector given by the DRM core.
Inside the detect function, it is converted to amdgpu_dm_connector so we
can run DC link detection, either light or full.
@force – This flag tells the function whether to run a full detect
again. If false, we avoid heavy DAC load detect steps to prevent
flicker. If true, we force a re-detect even when we normally skip it.
Fixes the below with gcc W=1:
function param 'aconnector' not described in 'amdgpu_dm_connector_poll'
function param 'force' not described in 'amdgpu_dm_connector_poll'
function param 'connector' not described in 'amdgpu_dm_connector_detect'
function param 'force' not described in 'amdgpu_dm_connector_detect'
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the BO pointer provided to amdgpu_bo_create_kernel() points to
non-NULL, amdgpu_bo_create_kernel() takes it as a hint to pin that address
rather than allocate a new BO.
This functionality is never desired for allocating ISP buffers. A new BO
should always be created when isp_kernel_buffer_alloc() is called, per the
description for isp_kernel_buffer_alloc().
Ensure this by zeroing *bo right before the amdgpu_bo_create_kernel() call.
Fixes: 55d42f6169 ("drm/amd/amdgpu: Add helper functions for isp buffers")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Summary:
* Enable VRR when unsynced with the stream
* Refactor DSC cap calculation for dcn35
* Add debug log for power feature
* Fix fill latency issue
* Do not initialize LSDMA if it is not supported by DMU
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Summary for changes in firmware:
* Use panel_inst instead of otg_inst when getting fw state
* Contrast strength improves when HDR desktop mode
* Ensure pipes have no outstanding HUBP requests prior to IPS RCG entry
* Check for vm request and vm idle status in IPS1/2 entry sequence
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
An invalidation request arriving during prefetch can potentially hang
the system if dynamic clock gating is enabled and memory power requests
are disabled.
[How]
• Disable clock gating and enable memory power requests for the duration
of the prefetch.
• Turn on clock gating and disable memory power requests again after
prefetch is complete.
Limit the scope for DCN35 and DCN42 only.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Last commit accidentally changed handling of in_transfer_func_change
from MED to FAST.
[How]
* Revert the line.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The change is to optimize the Replay power saving by
reducing the refresh rate with frame skipping mode
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Chuntao Tso <chunttso@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Review of usage scenarios requires dc_lock_descriptor modification.
[How]
Replace STATE/LINK/STREAM/PLANE with GLOBAL/STREAM/LINK, where
the first means all streams to be locked.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
dcn35 currently uses a hardcoded DSC display clock value which is incorrect
for some asic types. Newer DCN versions retrieve dsc display clock from
clk_mgr. The same can be done for dcn35.
how:
Refactor the DSC cap calculation using pre-existing logic.
Handle ODM combine requirements in dc_dsc.c.
Replace hardcoded display clock with actual value retrieved from clk_mgr.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Mohit Bawa <Mohit.Bawa@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why && how]
To optimize power consumption on certain OLED LED panels
by sending MaxCLL per frame to TCON
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The status of various power features is often important information when
debugging certain issues, such as underflow. This info helps to
narrow down the potential sources of errors.
[How]
Add dc interface to capture power feature enablement status.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When changing resolution (e.g., 4K → FHD) in mirror/clone mode with
certain monitors, the monitor blanks and loses connection due to an early
exit in vrr_settings_require_update(). The function only checks if VRR
state, fixed refresh target, or min/max refresh rate range has changed.
During mode changes, if the calculated min/max refresh values remain the
same even though the stream's v_total changed, the function returns early
without updating vrr_params.adjust.v_total_min/max, leaving the monitor's
VRR timing parameters unsynced with the new mode, causing it to blank out.
[How]
Explicitly adjust VRR parameters to the stream's nominal v_total when VRR
is supported, but inactive.
Fixes: 6d31602a9f ("drm/amd/display: more liberal vmin/vmax update for freesync")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
This array should be indexed by pstate type followed by plane index.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to check caps flag to determine whether LSDMA is supported in DMU
Reviewed-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu busy is a normal case when calling SMU_MSG_GetBadPageCount, so no need
to print error status at each time.Instead, only print error status when
timeout given by user is reached.
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The busy status returned by ras_eeprom_update_record_num may not be
an error, increase timeout to exclude false busy status. Also add more
comments to make the code readable.
v2: define a macro for the timeout value.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if bad page threshold is reached and take actions accordingly.
v2: remove rma message sent to smu when pmfw manages eeprom.
v3: add null pointer check for con.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a potential deadlock caused by inconsistent spinlock usage
between interrupt and process contexts in the userq fence driver.
The issue occurs when amdgpu_userq_fence_driver_process() is called
from both:
- Interrupt context: gfx_v11_0_eop_irq() -> amdgpu_userq_fence_driver_process()
- Process context: amdgpu_eviction_fence_suspend_worker() ->
amdgpu_userq_fence_driver_force_completion() -> amdgpu_userq_fence_driver_process()
In interrupt context, the spinlock was acquired without disabling
interrupts, leaving it in {IN-HARDIRQ-W} state. When the same lock
is acquired in process context, the kernel detects inconsistent
locking since the process context acquisition would enable interrupts
while holding a lock previously acquired in interrupt context.
Kernel log shows:
[ 4039.310790] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[ 4039.310804] kworker/7:2/409 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 4039.310818] ffff9284e1bed000 (&fence_drv->fence_list_lock){?...}-{3:3},
[ 4039.310993] {IN-HARDIRQ-W} state was registered at:
[ 4039.311004] lock_acquire+0xc6/0x300
[ 4039.311018] _raw_spin_lock+0x39/0x80
[ 4039.311031] amdgpu_userq_fence_driver_process.part.0+0x30/0x180 [amdgpu]
[ 4039.311146] amdgpu_userq_fence_driver_process+0x17/0x30 [amdgpu]
[ 4039.311257] gfx_v11_0_eop_irq+0x132/0x170 [amdgpu]
Fix by using spin_lock_irqsave()/spin_unlock_irqrestore() to properly
manage interrupt state regardless of calling context.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RAS info update in PMFW is time cost, wait for it.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_sched_entity_init wasn't called yet, so the only thing to
do is to release allocated memory.
This doesn't fix any bug since entity is zero allocated and
drm_sched_entity_fini does nothing in this case.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes the formatting in the patch
"amdkfd: Do not wait for queue op response during reset"
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of from physical address.
v2: add comment to make the code more readable
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The comment already explains it but the module parameter help text
doesn't.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4684
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain multi-GPU configurations (especially GFX12) may hit
data corruption when a DCC-compressed VRAM surface is shared across GPUs
using peer-to-peer (P2P) DMA transfers.
Such surfaces rely on device-local metadata and cannot be safely accessed
through a remote GPU’s page tables. Attempting to import a DCC-enabled
surface through P2P leads to incorrect rendering or GPU faults.
This change disables P2P for DCC-enabled VRAM buffers that are contiguous
and allocated on GFX12+ hardware. In these cases, the importer falls back
to the standard system-memory path, avoiding invalid access to compressed
surfaces.
Future work could consider optional migration (VRAM→System→VRAM) if a
performance regression is observed when `attach->peer2peer = false`.
Tested on:
- Dual RX 9700 XT (Navi4x) setup
- GNOME and Wayland compositor scenarios
- Confirmed no corruption after disabling P2P under these conditions
v2: Remove check TTM_PL_VRAM & TTM_PL_FLAG_CONTIGUOUS.
v3: simplify for upsteam and fix ip version check (Alex)
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Adding macros to simplify the process of adding new error codes.
Currently, to add an error code, the developer needs to add both the
enum and the string translation. This is error prone and can lead to
inconsistencies. The refactor adds a macro to automatically add the
string translation based on the enum.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In legacy way, bad page is queried from MCA registers, switch to
getting it from PMFW when PMFW manages eeprom data.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Utilize the 'out_value' output parameter of intel_de_wait_ms()
instead of re-reading the DPLL/DPIO_PHY_STATUS register after
polling has finished.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-17-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Utilize the 'out_value' output parameter of intel_de_wait_ms()
instead of re-reading the PHY_CONTROL register after polling
has finished.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-16-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Nuke the remaining _nowl() stuff from the wakelock code in the
form of __intel_de_wait_for_register_nowl(), and replace it with
intel_de_wait_fw_us_atomic() that uses the low level _fw() register
accessors in line with the rest of the code.
No change in behaviour since wakelocks are only supported on xe,
and xe doesn't have uncore.lock nor unclaimed register detection
stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-15-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
The low level _fw() register accessors aren't supposed to
grab the wakelock. Stop doing so in intel_de_wait_fw_ms().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-14-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
We already have the lower level intel_de_*_fw() stuff, so use
that instead of hand rolling something custom for the DMC
wakelock stuff.
As the wakelock stuff exists only on platforms supported
by the xe driver this doesn't even result in any functional
changes since xe doesn't have uncore.lock nor unclaimed
register access detection.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-13-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
_bxt_dpio_phy_init() doesn't us the _fw() register accessors
for anything else, so stop using them for the register polling
as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-12-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Add intel_de_wait_for_set_us() and intel_de_wait_for_clear_us()
as the microsecond counterparts to intel_de_wait_for_set_ms()
and intel_de_wait_for_clear_ms().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-9-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
intel_de_wait_custom() is finally unused. Get rid of it
before people start abusing it more.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-8-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Replace some users of intel_de_wait_custom() with intel_de_wait_ms().
This includes the cases where we pass in the default 2 microsecond
fast timeout, which is also what intel_de_wait_ms() uses so there
are no functional changes here.
Done with cocci (with manual formatting fixes):
@@
expression display, reg, mask, value, timeout_ms, out_value;
@@
- intel_de_wait_custom(display, reg, mask, value, 2, timeout_ms, out_value)
+ intel_de_wait_ms(display, reg, mask, value, timeout_ms, out_value)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-7-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Convert some of the intel_de_wait_custom() users over to
intel_de_wait_us(). We'll eventually want to eliminate
intel_de_wait_custom() as it's a hinderance towards using
poll_timeout_us().
This includes all the obvious cases where we only specify
a microsecond timeout to intel_de_wait_custom().
Done with cocci (with manual formatting fixes):
@@
expression display, reg, mask, value, timeout_us, out_value;
@@
- intel_de_wait_custom(display, reg, mask, value, timeout_us, 0, out_value)
+ intel_de_wait_us(display, reg, mask, value, timeout_us, out_value)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-6-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Introduce intel_de_wait_us() as the microsecond based
counterpart to the millisecond based intel_de_wait_ms().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-5-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
intel_de_wait*() take the timeout in milliseconds. Include
that information in the function name to make life less
confusing. I'll also be introducing microsecond variants
of these later.
Done with cocci:
@@
@@
(
static int
- intel_de_wait
+ intel_de_wait_ms
(...)
{
...
}
|
static int
- intel_de_wait_fw
+ intel_de_wait_fw_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
(...)
{
...
}
)
@@
@@
(
- intel_de_wait
+ intel_de_wait_ms
|
- intel_de_wait_fw
+ intel_de_wait_fw_ms
|
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
|
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-4-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
We currently have a bunch of places that want the final register
value after register polling. Currently those places are mostly
using intel_de_wait_custom(). That is not a function that we
want to keep around as it pretty much prevents conversion to
poll_timeout_us().
Have intel_de_wait() also return the final register value so
that some of the current users can be converted over to the
simpler interface.
Done with cocci:
@@
@@
int intel_de_wait(...
+ ,u32 *out_value
)
{
...
__intel_wait_for_register(...,
- NULL
+ out_value
)
...
}
@@
@@
intel_de_wait(...
+ ,NULL
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-3-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Currently we use a messy mix of intel_wait_for_register*()
and __intel_wait_for_register*() to implement various
register polling functions. Make the mess a bit more understandable
by always using the __intel_wait_for_register*() stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-2-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reduce the display dependency on struct drm_i915_private and i915_drv.h
by converting the rom interface to struct drm_device.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251110112048.2366725-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
