Export the helper function to determine if FEC is required on a non-UHBR
(8b10b) SST or MST link. A follow up change will take this into use for
MST as well.
While at it determine the output type from the CRTC state, which allows
dropping the intel_dp argument. Also make the function return the
required FEC state, instead of setting this in the CRTC state, which
allows only querying this requirement, without changing the state.
Also rename the function to intel_dp_needs_8b10b_fec(), to clarify that
the function determines if FEC is required on an 8b10b link (on 128b132b
links FEC is always enabled by the HW implicitly, so the function will
return false for that case).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251015161934.262108-4-imre.deak@intel.com
Atm, in the DP SST case the FEC state is computed before
intel_crtc_state::port_clock is initialized, hence intel_dp_is_uhbr()
will always return false and the FEC state will be always computed
assuming a non-UHBR link.
This happens to work, since the FEC state is recomputed later in
intel_dp_mtp_tu_compute_config(), where port_clock will be set already,
so intel_crtc_state::fec_enable will be reset as expected for UHBR. This
also depends on link rates being tried in an increasing order (i.e. from
non-UHBR -> UHBR link rates) in dsc_compute_link_config(), thus
intel_crtc_state::fec_enable being set for the non-UHBR rates and
getting reset for the first UHBR rate as expected.
A follow-up change will reuse intel_dp_fec_compute_config() for the DP
MST state computation, prepare for that here, making sure that the
function determines the correct intel_crtc_state::fec_enable=false state
for UHBR link rates based on the above.
The DP SST and MST state computation should be further unified to avoid
computing/setting the intel_crtc_state::fec_enable state multiple times,
but that's left for a follow-up change. For now add only code comments
about this.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251015161934.262108-3-imre.deak@intel.com
Add a helper to enable the DSC compression configuration for a CRTC.
Follow-up changes will introduce tracking for the same DSC state on the
whole link, which will need to be set whenever DSC is enabled for the
CRTC. Also, according to the above, when querying the DSC state on the
link, both the CRTC's and the link's DSC state must be considered.
Setting the DSC configuration for a CRTC and querying the DSC
configuration for the link (added by follow-up changes) is better done
via helper functions based on the above, prepare for that here.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251015161934.262108-2-imre.deak@intel.com
After doing tweaks to the VFs provisioning we may want to restore
back the auto-provisioning mode. Allow that unless VFs are still
enabled. This can be also used to release all VFs resources.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20251015091211.592-5-michal.wajdeczko@intel.com
When we attempt to tweak VFs configurations using debugfs, stop
assuming that VFs need auto-(un)provisioning.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20251015091211.592-4-michal.wajdeczko@intel.com
We shouldn't attempt to auto-provision VFs once we allow other
provisioning methods. Make the code aware of the new condition.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20251015091211.592-3-michal.wajdeczko@intel.com
As we plan to add more VFs provisioning methods, start moving
related code into single place.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20251015091211.592-2-michal.wajdeczko@intel.com
Currently, VRAM provisioning data is only exposed if the device supports
LMTT. While it should not be possible to modify VRAM provisioning on
platforms without LMTT, it is still useful to be able to read the VRAM
provisioning data on all discrete GPU platforms.
Expose the VRAM debugfs attributes whenever running on dGFX, adjusting
file permissions to read only when LMTT is not available.
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251016122233.3789-1-lukasz.laguna@intel.com
The madvise implementation currently resets the SVM madvise if the
underlying CPU map is unmapped. This is in an attempt to mimic the
CPU madvise behaviour. However, it's not clear that this is a desired
behaviour since if the end app user relies on it for malloc()ed
objects or stack objects, it may not work as intended.
Instead of having the autoreset functionality being a direct
application-facing implicit UAPI, make the UMD explicitly choose
this behaviour if it wants to expose it by introducing
DRM_XE_VM_BIND_FLAG_MADVISE_AUTORESET, and add a semantics
description.
v2:
- Kerneldoc fixes. Fix a commit log message.
Fixes: a2eb8aec3e ("drm/xe: Reset VMA attributes to default in SVM garbage collector")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: "Falkowski, John" <john.falkowski@intel.com>
Cc: "Mrozek, Michal" <michal.mrozek@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251015170726.178685-2-thomas.hellstrom@linux.intel.com
When splitting and restoring vmas for madvise, we only copied the
XE_VMA_SYSTEM_ALLOCATOR flag. That meant we lost flags for read_only,
dumpable and sparse (in case anyone would call madvise for the latter).
Instead, define a mask of relevant flags and ensure all are replicated,
To simplify this and make the code a bit less fragile, remove the
conversion to VMA_CREATE flags and instead just pass around the
gpuva flags after initial conversion from user-space.
Fixes: a2eb8aec3e ("drm/xe: Reset VMA attributes to default in SVM garbage collector")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251015170726.178685-1-thomas.hellstrom@linux.intel.com
Compute kernels often issue memory copies immediately after completion.
If the memory being copied is an SVM pointer that was faulted into the
device and then bound via userptr, it is undesirable to move that
memory. Worse, if userptr is mixed between system and device memory, the
bind operation may be rejected.
Xe already has the necessary plumbing to support userptr with mixed
mappings. This update modifies GPUSVM's get_pages to correctly locate
pages in such mixed mapping scenarios.
v2:
- Rebase (Thomas Hellström)
v3:
- Remove Fixes tag.
v4:
- Break out from series since the other patch was merged.
- Update patch subject, ensure dri-devel and Maarten are CC'd.
Cc: Maarten Lankhorst <maarten.lankhorst@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251015120320.176338-1-thomas.hellstrom@linux.intel.com
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
- Increase global invalidation timeout to handle some workloads
(Kenneth Graunke)
- Fix NPD while evicting BOs in an array of VM binds (Matthew Brost)
- Fix resizable BAR to account for possibly needing to move BARs other
than the LMEMBAR (Lucas De Marchi)
- Fix error handling in xe_migrate_init() (Thomas Hellström)
- Fix atomic fault handling with mixed mappings or if the page is
already in VRAM (Matthew Brost)
- Enable media samplers power gating for platforms before Xe2 (Vinay
Belgaumkar)
- Fix de-registering exec queue from GuC when unbinding (Matthew Brost)
- Ensure data migration to system if indicated by madvise with SVM
(Thomas Hellström)
- Fix kerneldoc for kunit change (Matt Roper)
- Always account for cacheline alignment on migration (Matthew Auld)
- Drop bogus assertion on eviction (Matthew Auld)
-----BEGIN PGP SIGNATURE-----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=BqxC
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2025-10-16' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Increase global invalidation timeout to handle some workloads
(Kenneth Graunke)
- Fix NPD while evicting BOs in an array of VM binds (Matthew Brost)
- Fix resizable BAR to account for possibly needing to move BARs other
than the LMEMBAR (Lucas De Marchi)
- Fix error handling in xe_migrate_init() (Thomas Hellström)
- Fix atomic fault handling with mixed mappings or if the page is
already in VRAM (Matthew Brost)
- Enable media samplers power gating for platforms before Xe2 (Vinay
Belgaumkar)
- Fix de-registering exec queue from GuC when unbinding (Matthew Brost)
- Ensure data migration to system if indicated by madvise with SVM
(Thomas Hellström)
- Fix kerneldoc for kunit change (Matt Roper)
- Always account for cacheline alignment on migration (Matthew Auld)
- Drop bogus assertion on eviction (Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/rch735eqkmprfyutk3ux2fsqa3e5ve4p77w7a5j66qdpgyquxr@ao3wzcqtpn6s
When tick values are large, the multiplication by NSEC_PER_SEC is larger
than 64 bits and results in bad conversions.
The issue is seen in PMU busyness counters that look like they have
wrapped around due to bad conversion. i915 PMU implementation returns
monotonically increasing counters. If a count is lesser than previous
one, it will only return the larger value until the smaller value
catches up. The user will see this as zero delta between two
measurements even though the engines are busy.
Fix it by using mul_u64_u32_div()
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14955
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/20251016000350.1152382-2-umesh.nerlige.ramappa@intel.com
Currently we compute the min_cdclk for each pipe during
intel_cdclk_atomic_check(). But that is too late for the
pipe prefill vs. vblank length checks (done during
intel_compute_global_watermarks).
We can't just reorder these things due to other dependencies,
so instead pull only the per-crtc minimum cdclk calculation
ahead. We should have enough information for that as soon
as we've computed the min cdclk for the planes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-8-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reorganize the IPS CDCLK handling such that the computed CDCLK
frequency will always satisfy the IPS requirements. The only
exceptional case is if IPS would push the CDCLK above the platform
max, but in that case we can simply disable IPS.
To make this 100% race free we must move the enable_ips modparam
check out from the min CDCLK computation path so that there is no
chance of hsw_min_cdclk() and hsw_ips_compute_config() observing
a different enable_ips value during the same commit.
This allows us to completely remove the cdclk_state stuff
from the IPS code. We only ever have to compare the IPS min
CDCLK against the platform max CDCLK. Thus we eliminate any ordering
requirements between intel_cdclk_atomic_check() and
hsw_ips_compute_config().
Additionally we reduce the three copies of the code doing the
95% calculation into just one.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-5-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
intel_bw_crtc_min_cdclk() (aka. the thing that deals with what bspec
calls "Maximum Pipe Read Bandwidth") doesn't really have anything to
do with the rest of intel_bw.c (which is all about SAGV/QGV and
memory bandwidth). Move it into intel_crtc.c (for the lack of a better
place).
And I don't really want to call intel_bw.c functions from intel_crtc.c,
so move out intel_bw_crtc_data_rate() as well. And when we move that we
pretty much have to move intel_bw_crtc_num_active_planes() as well since
the two are meant to be used as a pair (they both implement the same
"ignore the cursor" logic).
And in an effort to keep the namespaces at least semi-sensible we
flip the intel_bw_crtc_ prefix into intel_crtc_bw_.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Currently intel_bw.c contains basically three completely independent
parts:
- SAGV/memory bandwidth handling
- DBuf bandwidth handling
- "Maximum pipe read bandwidth" calculation, which is some kind
of internal per-pipe bandwidth limit.
Carve out the DBuf bandwdith handling into a separate file since
there is no actual dependency between it and the rest of intel_bw.c.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
amdgpu:
- Backlight fix
- SI fixes
- CIK fix
- Make CE support debug only
- IP discovery fix
- Ring reset fixes
- GPUVM fault memory barrier fix
- Drop unused structures in amdgpu_drm.h
- JPEG debugfs fix
- VRAM handling fixes for GPUs without VRAM
- GC 12 MES fixes
amdkfd:
- MES fix
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCaPDwuAAKCRC93/aFa7yZ
2CyaAP9Xwuar8fw2+CaoL7zdvo7MkqQpwOVBkyoQkKOQlZK9gQEAzotisG8jHkls
hAfx8eqFoNSQevdKkShgVubIHna5hAw=
=nbWU
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-fixes-6.18-2025-10-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.18-2025-10-16:
amdgpu:
- Backlight fix
- SI fixes
- CIK fix
- Make CE support debug only
- IP discovery fix
- Ring reset fixes
- GPUVM fault memory barrier fix
- Drop unused structures in amdgpu_drm.h
- JPEG debugfs fix
- VRAM handling fixes for GPUs without VRAM
- GC 12 MES fixes
amdkfd:
- MES fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20251016132224.2534946-1-alexander.deucher@amd.com
reg_in_range_table is a useful function that is used in multiple places,
and will be needed for WA_BB implementation later.
Let's move this function and i915_range struct to its own file, as we are
trying to move away from i915_utils files.
v2: move functions to their own file
v3: use correct naming convention
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Link:
https://lore.kernel.org/r/20251009215210.41000-1-matthew.s.atwood@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The rp0 frequency is a fused value that is read once during probe
and then cached, so there’s no need to trigger a runtime wake
when accessing rp0.
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Karthik Poosa <karthik.poosa@intel.com>
Link: https://lore.kernel.org/r/20251015094611.1468939-1-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In dw_hdmi_rk3228_setup_hpd(), the SCLIN mask incorrectly references
the RK3328 variant. This change updates it to the RK3228-specific mask
RK3228_HDMI_SCLIN_MSK using FIELD_PREP_WM16, ensuring proper HPD and
I2C pin configuration for RK3228.
Change: RK3328_HDMI_SCLIN_MSK -> RK3228_HDMI_SCLIN_MSK
Fixes: 63df37f3fc ("drm/rockchip: dw_hdmi: switch to FIELD_PREP_WM16* macros")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251010173143.72733-1-alok.a.tiwari@oracle.com
Add a new helper thingy to deal with the pipe prefill latency.
We get three potentially useful thigns out of this:
- skl_prefill_vblank_too_short() used for checking the
actual vblank/guardband length
- skl_prefill_min_guardband() to calculate a suitable guardband
size based on some worst case scaling/etc. estimates
- skl_prefill_min_cdclk() used to calculate a minimum cdclk
frequency required for very small vblank lengths (in case the
otherwise computed minimum cdclk doesn't result in fast enough
prefill).
The internal arithmetic is done terms of scanlines using .16
binary fixed point representation.
v2: Add the missing <<16 for framestart_delay
Drop the cdclk_state stuff in favor of crtc_state->min_cdclk
Rename to skl_prefill since this is skl+ only
Use intel_crtc_vblank_length() instead of hand rolling it
memset(0) in prefill_init()
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251014191808.12326-9-ville.syrjala@linux.intel.com
Add skl_wm0_prefill_lines() (based on the actual state) and
skl_wm0_prefill_lines_worst() (worst case estimate) which
tell us how many extra lines are needed in prefill for WM0.
The returned numbers are in .16 binary fixed point.
TODO: skl_wm0_prefill_lines_worst() is a bit rough still
v2: Drop all pre-icl FIXMEs since this only gets used for VRR guardband
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251014191808.12326-8-ville.syrjala@linux.intel.com
Add helpers to compute the required prefill line count and
adjustment factors for the scalers.
The "1st" variants hand out numbers for the first scaler stage
in the pipeline (pipe scaler if no plane scalers are enabled,
or the max from all the plane scaler). The "2nd" variants deal
with second scaler stage (pipe scaler when plane scaling is also
enabled, otherwise there is no second stage).
The _worst() variants give out worst case estimates, meant for
guardband sizing. The other variants are meant for the actual
vblank/guardband length check vs. prefill+pkgc/sagv latency.
The returned numbers are in .16 binary fixed point.
TODO: pretty rough, should check the actual scaler max scaling
factors instead of just assuming 3x everywhere
TODO: Reorder scaler assignment vs. vblank length check to get
the actual scale factors
v2: Drop debugs
v3: Ignore scale factors for the vblank length check for now
since we don't have the scalers assigned yet
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251015125645.11230-1-ville.syrjala@linux.intel.com
Add intel_vdsc_prefill_lines() which tells us how many extra lines
of latency the DSC adds to the pipe prefill.
We shouldn't need a "worst case" vs, "current case" split here
as the DSC state should only change during full modesets.
The returned numbers are in .16 binary fixed point.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251014191808.12326-6-ville.syrjala@linux.intel.com
Introduce a helper to compute the min required cdclk frequency
for a given guardband size. This could be used to bump up the
cdclk in case the vblank is so small that the normally computed
minimum cdclk results in too slow a prefill.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251014191808.12326-5-ville.syrjala@linux.intel.com
Add helpers to compute the CDCLKl adjustment factor for prefill
calculations. The adjustment factor is always <= 1.0. That is,
a faster CDCLK speeds up the pipe prefill.
intel_cdclk_prefill_adjustment_worst() gives out a worst case estimate,
meant to be used during guardband sizing. We can actually do better
than 1.0 here because the absolute minimum CDCLK is limited by the
dotclock. This will still allow planes, pfit, etc. to be changed any
which way without having to resize the guardband yet again.
intel_cdclk_prefill_adjustment() is supposed to give a more accurate
value based on the current min cdclk for the pipe, but currently that
is not yet available when this gets called. So for now use the same
worst case estimate here.
The returned numbers are in .16 binary fixed point.
TODO: the intel_cdclk_prefill_adjustment_worst() approach here
can result in guardband changes for DRRS. But I'm thinking
that is fine since M/N changes will always happen on the
legacy timing generator so guardband doesn't actually matter.
May need to think about this a bit more though...
v2: Use the worst case estimate always for now
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251014191808.12326-4-ville.syrjala@linux.intel.com
Reject modes whose linetime exceeds 64 usec.
First reason being that WM_LINETIME is limited to (nearly) 64 usec.
Additionally knowing the linetime is bounded will help with
determining whether overflows may be a concern during various
calculations.
I decided to round up, and accept the linetime==64 case. We use
various rounding directions for this in other parts of the code,
so I feel this provides the most consistent result all around.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251014191808.12326-3-ville.syrjala@linux.intel.com
Replace all dev_err(), dev_warn(), dev_info() and DRM_ERROR/WARN/INFO()
calls in drivers/gpu/drm/arm/display/komeda/komeda_crtc.c with the
corresponding drm_err(), drm_warn(), and drm_info() helpers.
The new drm_*() logging functions take a struct drm_device * as the
first argument. This allows the DRM core to prefix log messages with
the specific DRM device name and instance, which is essential for
distinguishing logs when multiple GPUs or display controllers are present.
This change aligns komeda with the DRM TODO item: "Convert logging to
drm_* functions with drm_device parameter".
Signed-off-by: Rahul Kumar <rk0006818@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/r/20250926093008.1949131-1-rk0006818@gmail.com
Update last_fence in the vm-bind path instead of kernel managed path.
last_fence is used to wait for work to finish in vm_bind contexts but not
used for kernel managed contexts.
This fixes a bug where last_fence is not waited on context close leading
to faults as resources are freed while in use.
Fixes: 92395af63a ("drm/msm: Add VM_BIND submitqueue")
Signed-off-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/680080/
Message-ID: <20251011-close_fence_wait_fix-v3-1-5134787755ff@gmail.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Current parser logic for GMU firmware assumes a dword aligned payload
size for every block. This is not true for all GMU firmwares. So, fix
this by using correct 'size' value in the calculation for the offset
for the next block's header.
Fixes: c6ed04f856 ("drm/msm/a6xx: A640/A650 GMU firmware path")
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/674040/
Message-ID: <20250911-assorted-sept-1-v2-2-a8bf1ee20792@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Update allow_vblank_delay_fastset() to permit vblank delay adjustments
during with LRR when VRR TG is always active.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20251016055415.2101347-11-ankit.k.nautiyal@intel.com
As we move towards using a shorter, optimized guardband, we need to adjust
how the delayed vblank start is computed.
Adjust the crtc_vblank_start using Vmin Vtotal - guardband only when
intel_vrr_always_use_vrr_tg() is true. Also update the
pipe_mode->crtc_vblank_start which is derived from
adjusted_mode->crtc_vblank_start in intel_crtc_compute_pipe_mode().
To maintain consistency between the computed and readout paths, update
the readout logic in intel_vrr_get_config() to overwrite crtc_vblank_start
with the same value (vtotal - guardband) on platforms with always-on
VRR TG.
This also paves way for guardband optimization, by handling the movement of
the crtc_vblank_start for platforms that have VRR TG always active.
v2: Drop the helper and add the adjustment directly to
intel_vrr_compute_guardband(). (Ville)
v3: Use adjusted_mode.crtc_vtotal instead of vmin and include the readout
logic to keep the compute and readout paths in sync. (Ville)
v4: Also set pipe_mode->crtc_vblank_start as its derived from
adjusted_mode. (Ville)
v5: Add a comment about rationale behind updating
pipe_mode->crtc_vblank_start. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20251016055415.2101347-10-ankit.k.nautiyal@intel.com
Currently, wake line latency checks rely on the vblank length,
which does not account for either the extra vblank delay for icl/tgl or for
the optimized guardband which will come into picture later at some point.
Validate whether the final vblank (with extra vblank delay) or guardband
is sufficient to support wake line latencies required by Panel Replay and
PSR2 selective update. Disable the PSR features if their wake requirements
cannot be accomodated.
v2: Add comments clarifying wake line checks and rationale for not
resetting SCL. (Jouni)
v3: Reset other psr flags based on features that are dropped. (Jouni)
v4: Update commit message.
v5: Remove early return and simplify the checking for wakelines. (Jouni)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251016055415.2101347-9-ankit.k.nautiyal@intel.com
Introduce intel_dp_compute_config_late() to handle late-stage
configuration checks for DP/eDP features. For now, it paves path for
psr_compute_config_late() to handle psr parameters that need to be
computed late.
Move the handling of psr_flag for Wa_18037818876 and setting of non-psr
pipes to intel_psr_compute_config_late() as these are the last things
to be configured for PSR features.
v2: Update dp_compute_config_late() to return int.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com> (#v1)
Link: https://lore.kernel.org/r/20251016055415.2101347-8-ankit.k.nautiyal@intel.com
Add a function to set non-psr pipes in crtc_state based on psr features.
This will help to move this part later where we re-evaluate psr features
and update the non-psr pipes.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251016055415.2101347-7-ankit.k.nautiyal@intel.com
Panel Replay and PSR2 selective update require sufficient vblank duration
to accommodate wake latencies. However, the current
wake_lines_fit_into_vblank() logic does not account for the minimum
Set Context Latency (SCL) lines.
Separate out _intel_psr_min_set_context_latency() to compute the minimum
SCL requirement based on platform and feature usage.
The alpm_config_valid() helper is updated to pass the necessary context for
determining whether Panel Replay or PSR2 selective update is enabled.
v2: While calling alpm_config_valid() for selective_update use false flag
instead of has_panel_replay. (Jouni)
v3: Correct ordering of the panel_replay, sel_update flags. (Jouni)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251016055415.2101347-6-ankit.k.nautiyal@intel.com
Currently crtc_vblank_start is assumed to be the vblank_start for the fixed
refresh rate case. That value can be different from the variable refresh
rate case whenever always_use_vrr_tg()==false. On icl/tgl it's always
different due to the extra vblank delay, and also on adl+ it could be
different if we were to use an optimized guardband.
So places where crtc_vblank_start is used to compute vblank length needs
change so as to account for cases where vrr is enabled. Specifically
with vrr.enable the effective vblank length is actually guardband.
Add a helper to get the correct vblank length for both vrr and fixed
refresh rate cases. Use this helper where vblank_start is used to
compute the vblank length.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20251016055415.2101347-5-ankit.k.nautiyal@intel.com
The helper intel_vrr_compute_config_late() practically just computes the
guardband. Rename intel_vrr_compute_config_late() to
intel_vrr_compute_guardband().
Since we are going to compute the guardband and then move the
vblank_start for optmizing guardband move it to
intel_crtc_compute_config() which handles such changes.
v2: Move the function at the last after clocks, pipe_mode etc. are all
set. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20251016055415.2101347-4-ankit.k.nautiyal@intel.com
Move intel_dpll_crtc_compute_clock in the beginning of the function so that
clocks are set before other things.
This will help in subsequent changes when the vrr guardband computation
is moved to intel_crtc_compute_config().
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20251016055415.2101347-3-ankit.k.nautiyal@intel.com
