The hwconfig table is part of the primary GT's GuC firmware. If the
primary GT is disabled, the hwconfig is unavailable and should be
reported to userspace as having size 0.
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-35-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
If the primary GT is disabled via configfs, GT-side L2 and TD cache
flushes are unnecessary since nothing is using/filling these caches.
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-34-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
During the early days of the Xe driver, there were cases where we
accessed some fields in the primary GT's xe_gt structure before the GT
itself was formally initialized; this required that the structure itself
be allocated during xe_tile_init_early(). A lot of refactoring of the
device probe has happened since that time and there's no longer a need
to allocate the primary GT early. Move the allocation into
xe_info_init() where GT initialization happens and where we're doing the
allocation of the media GT.
v2:
- Only make this change after a separate patch to perform VF GMD_ID
lookup with a dummy GT instead of xe_root_mmio_gt().
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-33-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
SRIOV VF initialization has a bit of a chicken and egg design problem.
Determining the IP version of the graphics and media IPs can't be done
via direct register reads as it is on PF or native and instead requires
querying the GuC. However initialization of the GT, including its GuC,
needs to wait until after we know the IP versions so that the proper
initialization steps for the platform/IP are followed.
Currently the (somewhat hacky) solution is to manually fill out just
enough fields in tile 0's primary GT structure to make it look as if the
GT has been initialized so that the GuC can be partially initialized and
queried to obtain the GMD_ID values. When the GT gets properly
initialized during the regular flows, the hacked-up values will get
overwritten as part of the general initialization flows.
Rather than using tile 0's primary GT structure to hold the hacked up
values for querying every GT on every tile, instead allocate a dedicated
dummy structure. This will allow us to move the tile->primary_gt's
allocation to a more consistent place later in the initialization flow
in future patches (i.e., we shouldn't even allocate this GT structure if
the GT is disabled/unavailable). It also helps ensure there can't be
any accidental leakage of initialization or state between the dummy
initialization for GMD_ID and the real driver initialization of the GT.
v2:
- Initialize gt->tile for temporary GT. (CI, Michal)
- Use scope-based cleanup handler to free temp GT. (Michal)
- Propagate actual error code from xe_gt_sriov_vf_bootstrap() rather
than just setting IP version to 0.0 now that read_gmdid() can return
an error. (Michal)
v3:
- Explicitly initialize gt to NULL, just in case something else gets
inserted before the kzalloc() in the future. (Lucas)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-32-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
FlatCCS presence/absence is a flag that should be tracked at the
platform level rather than the IP level. FlatCCS affects the
device-wide memory initialization and reservations so its effects are
not confined to a single IP block or GT. This is also a trait that
should be tied to the platform even if the graphics IP itself is not
present (e.g., if we disable the primary GT via configfs).
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-31-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Restrictions and requirements on VRAM alignment are something that
should be tracked at the platform level rather than the IP level. Even
when mixing and matching various graphics, media, and display IP blocks,
the platform as a whole has to have consistent memory allocation
handling. This is also a trait that should be tied to the platform even
if the graphics IP itself is not present (e.g., if we disable the
primary GT via configfs).
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-30-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The number of page table levels for PPGTT virtual addresses is something
that should be tracked at the platform level rather than the IP level.
Even when mixing and matching various graphics, media, and display IP
blocks, the platform as a whole has to have consistent page table
handling. This is also a trait that should be tied to the platform even
if the graphics IP itself is not present (e.g., if we disable the
primary GT via configfs).
v2:
- Drop default value of 4 and explicitly set the value in each platform
descriptor. (Lucas)
v3:
- Drop outdated code comment and commit message paragraph about default
value. (Gustavo)
v4:
- Add missing setting for tgl_desc. (Gustavo)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-29-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The number of virtual address bits is something that should be tracked
at the platform level rather than the IP level. Even when mixing and
matching various graphics, media, and display IP blocks, the platform as
a whole has to have consistent page table handling. This is also a
trait that should be tied to the platform even if the graphics IP itself
is not present (e.g., if we disable the primary GT via configfs).
v2:
- Drop the default value of 48 and explicitly set it in each relevant
descriptor. (Lucas, Michal)
v3:
- Drop an outdated comment about default value. (Michal)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-28-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Display interrupt handling has no relation to GT(s) on the platforms
supported by the Xe driver. We only call xe_display_irq_postinstall
with the first tile's primary GT, so the single condition that uses the
GT pointer within the function always evaluates to true. Drop the
unnecessary parameter and the condition.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-27-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The HuC initialization code determines whether a platform can have a HuC
on the primary GT by checking whether tile->media_gt is NULL; old Xe1
platforms that combined render+media into a single GT will always have a
NULL media_gt pointer. However once we allow media to be disabled via
configfs, there will also be cases where tile->media_gt is NULL on more
modern platforms, causing this condition to behave incorrectly.
To handle cases where media gets disabled via configfs (or theoretical
cases where media is truly fused off in hardware), change the condition
to consider the graphics version of the primary GT; only the old Xe1
platforms with graphics versions 12.55 or earlier should try to
initialize a HuC on the primary GT.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-26-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Kunit's generate_params() was recently updated to take an additional
test context parameter. Xe's IP and platform parameter generators were
updated accordingly at the same time, but the new parameter was not
added to the functions' kerneldoc, resulting in the following warnings:
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:78 function parameter 'test' not described in 'xe_pci_fake_data_gen_params'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:254 function parameter 'test' not described in 'xe_pci_graphics_ip_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:278 function parameter 'test' not described in 'xe_pci_media_ip_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:302 function parameter 'test' not described in 'xe_pci_id_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:390 function parameter 'test' not described in 'xe_pci_live_device_gen_param'
5 warnings as errors
Document the new parameter to eliminate the warnings and make CI happy.
Fixes: b9a214b5f6 ("kunit: Pass parameterized test context to generate_params()")
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20251013153014.2362879-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The "grf" clock is optional for Rockchip eDP controller(RK3399 needs
while RK3288 and RK3588 do not).
It can make the code more concise to use devm_clk_get_optional()
instead of devm_clk_get() with extra checks.
In addtion, DRM_DEV_ERROR() is replaced by dev_err_probe().
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250928103734.4007257-1-damon.ding@rock-chips.com
If the location madvise() is set to
DRM_XE_PREFERRED_LOC_DEFAULT_SYSTEM, the drm_pagemap in the
SVM gpu fault handler will be set to NULL. However there is nothing
that explicitly migrates the data to system if it is already present
in device memory.
In that case, set the device memory owner to NULL to ensure
data gets properly migrated to system on page-fault.
v2:
- Remove redundant dpagemap assignment (Himal Prasad Ghimiray)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v1
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251010104149.72783-2-thomas.hellstrom@linux.intel.com
Fixes: 10aa5c8060 ("drm/gpusvm, drm/xe: Fix userptr to not allow device private pages")
The function `guc_ct_send_locked()` is really quite simple, but still
looks complex due to exposed internals. It is sending a message,
and in case of lack of space, waiting for a proper moment to send
a retry.
Clear separation of send function and wait function will help with
readability. This is a cosmetic change only, no functional difference
is expected.
This patch introduces `guc_ct_send_wait_for_retry()`, and uses it to
greatly simplify `guc_ct_send_locked()`.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251009170844.178199-1-tomasz.lis@intel.com
We should try to get rid of checks that depend on struct
drm_i915_private (or struct xe_device) in display code. HAS_FLAT_CCS()
is one of them. In the interest of simplicity, add a reversed
HAS_AUX_CCS() feature check macro, as that's we mostly use it for in
display.
v2: include adl-p (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20251013144552.1710851-1-jani.nikula@intel.com
We should try to get rid of checks that depend on struct
drm_i915_private (or struct xe_device) in display
code. HAS_128_BYTE_Y_TILING() is one of them. In the interest of
simplicity, just duplicate the check as HAS_128B_Y_TILING() in display.
v2: gen2 also has 128-byte Y-tile
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/2a7877f8f1d11114c1a17869bd24d83e13b1fac2.1760094361.git.jani.nikula@intel.com
Gen 2 platforms actually have 128-byte Y-tile, it's just different from
the 128-byte Y-tile on i945+. Make the HAS_128_BYTE_Y_TILING() feature
check macro and its usage slightly less convoluted by including gen 2 in
it.
i915_tiling_ok() would strictly not need changing, but separate the if
clauses to emphasize gen 2 X-tile also being 128 bytes.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/41bf9d67a11f38f4ab0f82740f38d5c8fe0bb58b.1760094361.git.jani.nikula@intel.com
On SoCs, like the SAM9X75, which embed the XLCDC ip, the registers that
configure the unified scaling engine were not filled with proper values.
Indeed, for YCbCr formats, the VXSCFACT bitfield of the HEOCFG25
register and the HXSCFACT bitfield of the HEOCFG27 register were
incorrect.
For 4:2:0 formats, both vertical and horizontal factors for
chroma chanels should be divided by 2 from the factors for the luma
channel. Hence:
HEOCFG24.VXSYFACT = VFACTOR
HEOCFG25.VSXCFACT = VFACTOR / 2
HEOCFG26.HXSYFACT = HFACTOR
HEOCFG27.HXSCFACT = HFACTOR / 2
However, for 4:2:2 formats, only the horizontal factor for chroma
chanels should be divided by 2 from the factor for the luma channel;
the vertical factor is the same for all the luma and chroma channels.
Hence:
HEOCFG24.VXSYFACT = VFACTOR
HEOCFG25.VXSCFACT = VFACTOR
HEOCFG26.HXSYFACT = HFACTOR
HEOCFG27.HXSCFACT = HFACTOR / 2
Fixes: d498771b0b ("drm: atmel_hlcdc: Add support for XLCDC using IP specific driver ops")
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20241014094942.325211-1-manikandan.m@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
update the LCDC_ATTRE register in drm plane atomic_disable to handle
the configuration changes of each layer when a plane is disabled.
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20241014064644.292943-1-manikandan.m@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
The vop2_plane_atomic_check() function incorrectly checks
drm_rect_width(dest) twice instead of verifying both width and height.
Fix the second condition to use drm_rect_height(dest) so that invalid
destination rectangles with height < 4 are correctly rejected.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251012142005.660727-1-alok.a.tiwari@oracle.com
The `ttm_resource_manager_usage()` function currently assumes `man->bdev` is non-NULL when accessing `man->bdev->lru_lock`.
However, in scenarios where the resource manager is not fully initialized (e.g., APU platforms that lack dedicated VRAM, or incomplete manager setup),
`man->bdev` may remain NULL. This leads to a NULL pointer dereference when attempting to acquire the `lru_lock`, triggering kernel OOPS.
Fix this by adding an explicit safety check for `man->bdev` before accessing its members:
- Use `WARN_ON_ONCE(!man->bdev)` to emit a one-time warning (a soft assertion) when `man->bdev` is NULL. This helps catch invalid usage patterns during debugging without breaking production workflows.
- Return 0 immediately if `man->bdev` is NULL, as a non-initialized manager cannot have valid resource usage to report.
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://lore.kernel.org/r/20251013085849.1735612-1-Jesse.Zhang@amd.com
The color parameter passed to drm_draw_fill24() was truncated to 16
bits, leading to an incorrect color drawn to the target iosys_map.
Fix this behavior, widening the parameter to 32 bits.
Fixes: 31fa2c1ca0 ("drm/panic: Move drawing functions to drm_draw")
Signed-off-by: Francesco Valla <francesco@valla.it>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20251003-drm_draw_fill24_fix-v1-1-8fb7c1c2a893@valla.it
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
In normal operation, a registered exec queue is disabled and
deregistered through the GuC, and freed only after the GuC confirms
completion. However, if the driver is forced to unbind while the exec
queue is still running, the user may call exec_destroy() after the GuC
has already been stopped and CT communication disabled.
In this case, the driver cannot receive a response from the GuC,
preventing proper cleanup of exec queue resources. Fix this by directly
releasing the resources when GuC is not running.
Here is the failure dmesg log:
"
[ 468.089581] ---[ end trace 0000000000000000 ]---
[ 468.089608] pci 0000:03:00.0: [drm] *ERROR* GT0: GUC ID manager unclean (1/65535)
[ 468.090558] pci 0000:03:00.0: [drm] GT0: total 65535
[ 468.090562] pci 0000:03:00.0: [drm] GT0: used 1
[ 468.090564] pci 0000:03:00.0: [drm] GT0: range 1..1 (1)
[ 468.092716] ------------[ cut here ]------------
[ 468.092719] WARNING: CPU: 14 PID: 4775 at drivers/gpu/drm/xe/xe_ttm_vram_mgr.c:298 ttm_vram_mgr_fini+0xf8/0x130 [xe]
"
v2: use xe_uc_fw_is_running() instead of xe_guc_ct_enabled().
As CT may go down and come back during VF migration.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251010172529.2967639-2-shuicheng.lin@intel.com
(cherry picked from commit 9b42321a02)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Where applicable, enable media sampler power gating. Also, add
it to the powergate_info debugfs.
v2: Remove the sampler powergate status since it is cleared quickly anyway.
v3: Use vcs mask (Rodrigo) and fix the version check for media
v4: Remove extra spaces
v5: Media samplers are independent of vcs mask,
use Media version 1255 (Matt Roper)
Fixes: 38e8c4184e ("drm/xe: Enable Coarse Power Gating")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20251010011047.2047584-1-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 4cbc08649a)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Moving to VRAM will fail if mixed mappings are present or if the page is
already located in VRAM. Atomic faults that require a move to VRAM
currently retry without attempting to evict mixed mappings or locate
existing VRAM mappings.
This patch fixes the issue by attempting to evict mixed mappings or find
existing VRAM pages when a move to VRAM fails during atomic fault
handling.
Fixes: a9ac0fa455 ("drm/xe: Strict migration policy for atomic SVM faults")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251009130629.3531962-1-matthew.brost@intel.com
(cherry picked from commit 75188605c5)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The exhaustive eviction accidently changed an error path goto to
a return. Fix this.
Fixes: 59eabff2a3 ("drm/xe: Convert xe_bo_create_pin_map() for exhaustive eviction")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://lore.kernel.org/r/20250910160939.103473-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 381f1ed151)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There may be cases in which the BAR0 also needs to move to accommodate
the bigger BAR2. However if it's not released, the BAR2 resize fails.
During the vram probe it can't be released as it's already in use by
xe_mmio for early register access.
Add a new function in xe_vram and let xe_pci call it directly before
even early device probe. This allows the BAR2 to resize in cases BAR0
also needs to move, assuming there aren't other reasons to hold that
move:
[] xe 0000:03:00.0: vgaarb: deactivate vga console
[] xe 0000:03:00.0: [drm] Attempting to resize bar from 8192MiB -> 16384MiB
[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: releasing
[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: assigned
[] pcieport 0000:00:01.0: PCI bridge to [bus 01-04]
[] pcieport 0000:00:01.0: bridge window [mem 0x83000000-0x840fffff]
[] pcieport 0000:00:01.0: bridge window [mem 0x4000000000-0x44007fffff 64bit pref]
[] pcieport 0000:01:00.0: PCI bridge to [bus 02-04]
[] pcieport 0000:01:00.0: bridge window [mem 0x83000000-0x840fffff]
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
[] pcieport 0000:02:01.0: PCI bridge to [bus 03]
[] pcieport 0000:02:01.0: bridge window [mem 0x83000000-0x83ffffff]
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
[] xe 0000:03:00.0: [drm] BAR2 resized to 16384M
[] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e221:0000 dgfx:1 gfx:Xe2_HPG (20.02) ...
For BMG there are additional fix needed in the PCI side, but this
helps getting it to a working resize.
All the rebar logic is more pci-specific than xe-specific and can be
done very early in the probe sequence. In future it would be good to
move it out of xe_vram.c, but this refactor is left for later.
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org # 6.12+
Link: https://lore.kernel.org/intel-xe/fafda2a3-fc63-ce97-d22b-803f771a4d19@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250918-xe-pci-rebar-2-v1-2-6c094702a074@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 45e33f220f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
An array of VM binds can potentially evict other buffer objects (BOs)
within the same VM under certain conditions, which may lead to NULL
pointer dereferences later in the bind pipeline. To prevent this, clear
the allow_res_evict flag in the xe_bo_validate call.
v2:
- Invert polarity of no_res_evict (Thomas)
- Add comment in code explaining issue (Thomas)
Cc: stable@vger.kernel.org
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6268
Fixes: 774b5fa509 ("drm/xe: Avoid evicting object of the same vm in none fault mode")
Fixes: 77f2ef3f16 ("drm/xe: Lock all gpuva ops during VM bind IOCTL")
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20251009110618.3481870-1-matthew.brost@intel.com
(cherry picked from commit 8b9ba8d6d9)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The previous timeout of 500us seems to be too small; panning the map in
the Roll20 VTT in Firefox on a KDE/Wayland desktop reliably triggered
timeouts within a few seconds of usage, causing the monitor to freeze
and the following to be printed to dmesg:
[Jul30 13:44] xe 0000:03:00.0: [drm] *ERROR* GT0: Global invalidation timeout
[Jul30 13:48] xe 0000:03:00.0: [drm] *ERROR* [CRTC:82:pipe A] flip_done timed out
I haven't hit a single timeout since increasing it to 1000us even after
several multi-hour testing sessions.
Fixes: 0dd2dd0182 ("drm/xe: Move DSB l2 flush to a more sensible place")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5710
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250912223254.147940-1-kenneth@whitecape.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 146046907b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Using 2M pages in xe_migrate_vram has two benefits: we issue fewer
instructions per 2M copy (1 vs. 512), and the cache hit rate should be
higher. This results in increased copy engine bandwidth, as shown by
benchmark IGTs.
Enable 2M pages by reserving PDEs in the migrate VM and using 2M pages
in xe_migrate_vram if the DMA address order matches 2M.
v2:
- Reuse build_pt_update_batch_sram (Stuart)
- Fix build_pt_update_batch_sram for PAGE_SIZE > 4K
v3:
- More fixes for PAGE_SIZE > 4K, align chunk, decrement chunk as needed
- Use stack incr var in xe_migrate_vram_use_pde (Stuart)
v4:
- Split PAGE_SIZE > 4K fix out in different patch (Stuart)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20251013034555.4121168-3-matthew.brost@intel.com
The build_pt_update_batch_sram function in the Xe migrate layer assumes
PAGE_SIZE == XE_PAGE_SIZE (4K), which is not a valid assumption on
non-x86 platforms. This patch updates build_pt_update_batch_sram to
correctly handle PAGE_SIZE > 4K by programming multiple 4K GPU pages per
CPU page.
v5:
- Mask off non-address bits during compare
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Simon Richter <Simon.Richter@hogyros.de>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20251013034555.4121168-2-matthew.brost@intel.com
Correct several spelling and grammar issues in xe_gt struct
documentation to improve readability:
- Fix "to not" -> "do not".
- Fix "mmigrations" -> "migrations".
- Fix "Multiple queues exists" -> "Multiple queues exist".
- Fix "are be processed" -> "to be processed".
- Fix "have being processed" -> "have been processed".
These changes are purely cosmetic and do not affect functionality.
v2: drop kernel-doc formatting change. (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251006151317.2553182-2-shuicheng.lin@intel.com
The comment referenced the flag name incorrectly as 'I915_EXEC_NORELOC'
(missing underscore). This patch corrects the spelling in the comment
only; there is no functional change.
Signed-off-by: Marlon Henrique Sanches <marlonsanches@estudante.ufscar.br>
Link: https://lore.kernel.org/r/20251013183123.438573-1-marlonsanches@estudante.ufscar.br
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
User requested power limits and clock settings are already restored as
part of smu_restore_dpm_user_profile(). It's unnecessary to call the
same restore as part of smu_resume().
Revert the following commits to drop that extra restore:
commit ed4efe426a ("drm/amd: Restore cached power limit during resume")
commit 796ff8a7e0 ("drm/amd: Restore cached manual clock settings during resume")
commit f9b80514a7 ("drm/amd: Only restore cached manual clock settings in restore if OD enabled")
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove queue after reset flag is required to remove a queue that has
been successfully reset to clean up the MES' internal state.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
userptrs could be changed by the user at any time and
hence while locking all the bos before GPU start processing
validate all the userptr bos.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At times we need a bo reference for hmm and for that add
a new struct amdgpu_hmm_range which will hold an optional
bo member and hmm_range.
Use amdgpu_hmm_range instead of hmm_range and let the bo
as an optional argument for the caller if they want to
the bo reference to be taken or they want to handle that
explicitly.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For legacy SOCs, discovery binary is sideloaded. Instead of checking for
binary blob, use a flag to determine if discovery region needs to be
reserved.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
provide a interface that allows ras client send msg to smu/pmfw directly.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow access to user interfaces like sysfs/hwmon only after full
initialization of the device. When device is part of XGMI hive and a
reset is required during initialization, the inteface files will be
created as part of minimal device initialization. Full initialization of
the device will be done only after all devices in XGMI hive are probed
and a reset is done together on all.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Complete reset-on-init sequence before sysfs interfaces are created.
Devices get properly initiaized only after reset, and then only sysfs
interfaces should be made available.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add amdgpu_discovery_info structure to keep all discovery related
information.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aggregate sysfs ini/fini calls into separate functions. No functional
change.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Decouple the amdgpu fence from the amdgpu_job structure.
This lets us clean up the separate fence ops for the embedded
fence and other fences. This also allows us to allocate the
vm fence up front when we allocate the job.
v2: Additional cleanup suggested by Christian
v3: Additional cleanups suggested by Christian
v4: Additional cleanups suggested by David and
vm fence fix
v5: cast seqno (David)
Cc: David.Wu3@amd.com
Cc: christian.koenig@amd.com
Tested-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
