On systems where PCI bus renumbering occurs (e.g. pci=realloc,
resource conflicts), the runtime bus number may differ from the
BIOS POST bus number recorded in the VFCT table. This causes
amdgpu_acpi_vfct_bios() to fail finding the VBIOS even though
the correct device entry exists.
Introduce amdgpu_acpi_vfct_match() which treats the bus number
as a soft filter: vendor/device/function identity is the hard
requirement, while exact bus match is the preferred path. When
bus numbers disagree but device identity matches, accept the
VFCT entry and log a dev_notice for diagnostics.
Reported-by: Oz Tiram <oz@shift-computing.de>
Closes: https://lore.kernel.org/amd-gfx/20260621173211.28443-1-oz@shift-computing.de/
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260708193518.702584-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 11c1416720)
Cc: stable@vger.kernel.org
amdgpu_bo_create_reserved() only allocates a new BO when
*bo_ptr (struct amdgpu_bo **bo_ptr as input parameter) is
NULL, it simply skips creation when *bo_ptr is non-NULL.
But it unconditionally reserves, pins, gart allocates
and maps the BO afterwards.
When the same non-NULL BO pointer is passed in again,
for example firmware buffers that live in adev and are
re-loaded on every resume / cp_resume / start
under AMDGPU_FW_LOAD_DIRECT, amdgpu_bo_pin() just increases
pin_count unconditionally, however the matching teardown only unpins
once, so pin_count never drops to zero, so TTM is not able
to move, swap or evict a BO, causing BO leaks.
This commit fixes this issue by only pinning the bo
once at creation, and repeated calls no longer
take additional pin references.
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ddc0ae762)
Cc: stable@vger.kernel.org
pre_reset only force-completes fences of MAPPED queues. A queue in any
other state (e.g. mid-eviction) keeps its last_fence pending; after a
GPU reset that fence never signals, so the eviction/suspend worker and
process teardown (amdgpu_evf_mgr_flush_suspend) wait on it forever and
wedge the machine:
INFO: task kworker/6:28 blocked for more than 120 seconds.
Workqueue: events amdgpu_eviction_fence_suspend_worker [amdgpu]
Call Trace:
dma_fence_wait_timeout+0x7e/0x130
amdgpu_userq_evict+0x67/0x140 [amdgpu]
amdgpu_eviction_fence_suspend_worker+0xd8/0x160 [amdgpu]
process_scheduled_works+0xa6/0x420
Force-complete every queue's fence regardless of state. The unmap and
mark-hung step stays gated on MAPPED, since unmapping a queue that is
not mapped is invalid.
Fixes: 290f46cf57 ("drm/amdgpu: Implement user queue reset functionality")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9102b39fa9)
Cc: stable@vger.kernel.org
set_pipe_unlock_order needs to be set to true for the pipes to be unlocked
in correct order to avoid det overallocation
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 183bbded99)
set_pipe_unlock_order needs to be set to true for the pipes to be unlocked
in correct order to avoid det overallocation
Reviewed-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 198663d035)
[Why]
FWTS autobrightness fails on eDP panels because actual_brightness can
read higher than the advertised max_brightness (e.g. 63576 vs 62451).
The conversion helpers expose the firmware PWM range to userspace as
[0..max]. But max_brightness is advertised as (max - min), which is
smaller. So reading the level can return a value above max_brightness.
This regressed in commit 4b61b8a390 ("drm/amd/display: Add debugging
message for brightness caps"), which changed max_brightness to
(max - min) and undid commit 8dbd72cb79 ("drm/amd/display: Export full
brightness range to userspace").
[How]
Advertise max_brightness as max, and scale the initial AC/DC brightness
against max too. Update the KUnit expectations to match.
Fixes: 4b61b8a390 ("drm/amd/display: Add debugging message for brightness caps")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd9e2b5b04)
Cc: stable@vger.kernel.org
[why]
The 8K120/8K240 timings live in DisplayID extension blocks 2 and 3
of this EDID. The EDID is a 4-block (512-byte) HDMI 2.1 EDID
that uses HF-EEODB.
drm core reads and parses this correctly, but amdgpu rebuilds its own copy.
Only 2 of 4 blocks were copied into sink->dc_edid, that leads to
drm_edid_connector_add_modes() never sees blocks 2 and 3.
[how]
Directly populate edid_blob_ptr with a blob whose length is the full,
and HF-EEODB-aware size.
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 11a90eaf5c)
No functional changes. Just clean up a conceptual mismatch.
Based on feedback on the NUTMEG code in DC, the
preferred_link_setting is meant to force the DP link to a
specific setting, meaning both the link rate and lane count
should be locked to an exact value. What NUTMEG needs is
a lower bound on the link rate, which is not the same concept.
Implement this as a HW workaround flag instead.
Suggested-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 871ceb8538)
Cc: stable@vger.kernel.org
When there is a preferred link rate setting, it needs to be
applied to both the current and initial link rate.
This was regressed by a "coding style" fix, which caused
the current link rate to not respect the preferred value.
This commit restores the functionality of NUTMEG,
the DP bridge encoder found on old APUs such as Kaveri.
Fixes: a62346043a ("drm/amd/display: Fix coding style issue")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5465
Cc: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e78b0a367f)
Cc: stable@vger.kernel.org
total_cwsr_size was computed in 32-bit before being used as a BO/SVM
allocation size.
With large ctx_save_restore_area_size and debug_memory_size
multiplied by the XCC count, the product can wrap,
yielding an undersized CWSR save area that firmware later overruns.
Promote total_cwsr_size to u64 and use check_add_overflow()/
check_mul_overflow() in both kfd_queue_acquire_buffers() and
kfd_queue_release_buffers().
Signed-off-by: Yongqiang Sun <Yongqiang.Sun@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 319f7e1342)
Cc: stable@vger.kernel.org
[why]
DCN42B is missing some register masks, which are causing errors in dmesg.
[how]
Make DCN42B reuse the DCN42 register lists, and add the missing defines manually.
Fixes: 64142f9d51 ("drm/amd/display: Fix DCN42 null registers & register masks")
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7d6914590)
GC 11.7.0 and 11.7.1 should map to AMDGPU_FAMILY_GC_11_5_4 for DCN42.
Fixes: cf591e67c0 ("drm/amdgpu: add support for GC IP version 11.7.0")
Fixes: a928d8d81e ("drm/amdgpu: add support for GC IP version 11.7.1")
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f8ee6447e7)
on plane disable) along with couple of GT selftests fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmpadygACgkQ+mJfZA7r
E8prkQf/anrvKC+XNFx1PHSBwHiuzuCDCCGm+M4guTs1WxUi0m9yAhD7YWKXnC8r
8j2SUB3Vcm6rEYTEspd+BktN3WdGFymDQ+LTuxZNb84pm0fkpHat0VlX7RBib373
OgaiDK0odXWedPoaOglGMmTY0KS6BMuBFFZMHdFfoK06fjkeZO18aFw+eyh9NBLH
CqZkbMygXBRKUfAT81V2+IUKeiTQ5DZTjTrysx9ywA7+6l6zlH85B0c3bGGZHQE1
YzQVnRbqStMfCdkzJ1Tj9RLA6iygCcRrA7taOwIep5plDCA0x7j7ZKWSNvePcmQJ
YSaZ7wr/wUdyl5aPsSyBZQ0dGBIb6w==
=Y8Vk
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2026-07-17' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
Couple of display fixes (NV12 for bigjoiner and Watermark clear
on plane disable) along with couple of GT selftests fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/alp3ks0K1ZsxUC05@intel.com
ttm_pool_split_for_swap() unconditionally splits high-order pool pages
into order-0 pages before backup, so every compound the shrinker
touches is shattered even when the rest of the system would prefer it
stay intact. Under sustained kswapd pressure this fragments memory
enough to drive other parts of MM into recovery loops.
Back up each compound at its native order instead. In
ttm_pool_backup(), hand the full compound to the new
ttm_backup_backup_folio(), which backs up subpages to a contiguous
range of shmem indices and returns the base handle plus the number of
subpages actually backed up (@nr_backed). On full success, free the
compound once at its native order -- no split_page(), no per-4K
refcount juggling.
A per-folio backup can't be made fully atomic under memory pressure:
ttm_backup_backup_folio() must allocate shmem folios before source
subpages can be released, so under true OOM any subpage may fail
while the rest of the compound is still live. Two mechanisms handle
this without regressing reclaim behaviour:
- alloc_gfp gets __GFP_NOMEMALLOC whenever order > 0 (cleared again
for order-0), so a high-order backup fails fast with -ENOMEM
instead of draining kernel reserves, leaving them for other
allocations under the same pressure.
- If ttm_backup_backup_folio() still returns a short @nr_backed with
a valid handle for the successfully-backed prefix, split the
source compound with ttm_pool_split_for_swap(), free the prefix as
order-0 pages (already safely in shmem), and retry the remaining
subpages at order 0, where __GFP_NOMEMALLOC is cleared and
reserves may be used as a last resort.
This preserves the original split-on-OOM fallback while keeping the
common case fragmentation-free, and preserves the "partial backup is
allowed" contract (shrunken is incremented per subpage backed up).
The restore-side leftover-page split in ttm_pool_restore_commit() is
left as-is: it's unreachable in practice and not worth complicating
the restore state machine to avoid.
Testing: the existing backup_fault_inject point only truncated
tt->num_pages, which never exercised the reactive split path above
since it never left a compound partially backed up. Wire fault
injection into ttm_backup_backup_folio() itself: past the first
subpage of a compound, synthesize a -ENOMEM in place of
shmem_read_folio_gfp() when should_fail() trips, producing the same
short @nr_pages_backed a real failure would and forcing
ttm_pool_backup() through the split-and-retry path. The fault_attr
stays private to ttm_pool.c; ttm_backup.c reaches it through
ttm_backup_fault_inject_folio(), declared in ttm_pool_internal.h.
While converting the writeback branch to operate on the whole folio,
the unlock condition after shmem_writeout() also changed from `if
(ret)` to `if (ret == AOP_WRITEPAGE_ACTIVATE)`, matching the actual
contract: shmem_writeout()/swap_writeout() only leave the folio locked
when returning AOP_WRITEPAGE_ACTIVATE; any other return (including a
hard error from arch_prepare_to_swap()) means the folio was already
unlocked internally. The old `if (ret)` check would have double-
unlocked in that hard-error case.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: b63d715b80 ("drm/ttm/pool, drm/ttm/tt: Provide a helper to shrink pages")
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260716201358.4086085-1-matthew.brost@intel.com
There are only three devicetree fixes this time: one critical memory
corruption fix for Renesas and three minor corrections for Tegra.
The MAINTAINERS file is updated for a new maintainer of the CIX platform
and two address changes.
The rest is all driver fixes, mostly firmware:
- multiple runtime issues in ARM SCMI and FF-A firmware code, dealing
with error handling for corner cases in firmware.
- multiple fixes for reset drivers, dealing with individual platform
specific mistakes and more error handling
- minor build and runtime fixes for the Tegra SoC drivers
-----BEGIN PGP SIGNATURE-----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=BN00
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are only three devicetree fixes this time: one critical memory
corruption fix for Renesas and three minor corrections for Tegra.
The MAINTAINERS file is updated for a new maintainer of the CIX
platform and two address changes.
The rest is all driver fixes, mostly firmware:
- multiple runtime issues in ARM SCMI and FF-A firmware code, dealing
with error handling for corner cases in firmware.
- multiple fixes for reset drivers, dealing with individual platform
specific mistakes and more error handling
- minor build and runtime fixes for the Tegra SoC drivers"
* tag 'soc-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: renesas: ironhide: Describe inline ECC carveouts
MAINTAINERS: Update maintainer and git tree for CIX SoC
ARM: Don't let ARMv5 platforms select USE_OF
MAINTAINERS: Update SpacemiT SoC git tree repository
firmware: arm_scmi: Rate-limit queue-full warnings in IRQ context
firmware: arm_scmi: Use 64-bit division for clock rate rounding
reset: imx7: Correct polarity of MIPI CSI resets on i.MX8MQ
reset: sunxi: fix memory region leak on ioremap failure
dt-bindings: reset: altr: add COMBOPHY_RESET for Agilex5
reset: spacemit: k3: fix USB2 ahb reset
firmware: arm_scmi: Grammar s/may needed/may be needed/
firmware: arm_ffa: Fix NULL dereference in ffa_partition_info_get()
firmware: arm_ffa: Respect firmware advertised RX/TX buffer size limits
arm64: tegra: Fix CPU1 node unit-address on Tegra264
arm64: tegra: Fix CPU compatible string to cortex-a78ae on Tegra234
MAINTAINERS: .mailmap: update Jens Wiklander's email address
soc/tegra: fuse: Fix spurious straps warning on SMCCC platforms
soc/tegra: pmc: fix #ifdef block in header
drm/tegra: Fix a strange error handling path
arm64: tegra: Remove fallback compatible for GPCDMA
In atomic_check, damage handling is not fully evaluated. Another
atomic_check helper could trigger a full modeset and thus invalidate
damage clips.
Allocation of the request/response buffers in appletbdrm depends on
correct damage information. Otherwise it might allocate incorrectly
sized buffers. Allocate the buffers in the driver's begin_fb_access
helper. It runs early during the commit when damage clipping has been
fully evaluated.
v5:
- pass plane state as the old damage-iterator state
v2:
- allocate before drm_gem_begin_shadow_fb_access() to avoid leak on error
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Aditya Garg <gargaditya08@proton.me>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260610152505.260172-6-tzimmermann@suse.de
Compare the sampled clock values instead of their addresses. Comparing
addresses leaves the samples unsorted, preventing the code from discarding
the minimum and maximum samples.
Fixes: 1a53924792 ("drm/i915/selftests: Measure CS_TIMESTAMP")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260714220430.238433-1-emreleno@gmail.com
(cherry picked from commit 682ea2d28d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The UV/Y plane DDB entriess are never cleared on
sk_wm_plane_disable_noatomic() and can leave stale DDB state
for NV12 planes on pre-Gen11 devices
Fixes: d34b59d5ba ("drm/i915: Add skl_wm_plane_disable_noatomic()")
Assisted-by: Copilot:claude-sonnet-4.6
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260615203355.218578-2-vinod.govindapillai@intel.com
(cherry picked from commit 60f68a6ba2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Admin-only PF mode does not expose media or 3D execution capabilities
to userspace, so display pipelines cannot receive rendered content.
Fixes: d88c4bac8c ("drm/xe/pf: Restrict device query responses in admin-only PF mode")
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260714053259.504308-2-satyanarayana.k.v.p@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 7ef55ae582)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
GuC exec queue destruction can run asynchronously. If the final device
put happens from a destroy worker, drmm cleanup can end up draining
the same workqueue and deadlock.
Hold a drm_device reference for the queue lifetime and drop it after
queue teardown completes. This keeps drmm cleanup from running while
async destroy work is still pending.
Move GuC destroy work to a module-lifetime Xe workqueue and flush it
on PCI remove so hot-unbind/rebind still waits for pending destroy work.
With queue-held device refs, guc_submit_sw_fini() cannot run with live
GuC IDs. Replace the fini wait with an assertion and remove the unused
fini_wq.
v2:
- Rebase
v3:
- Switch to queue-lifetime drm_dev_get()/drm_dev_put() model. (Matt)
- Queue async teardown on system_dfl_wq instead of xe->destroy_wq. (Matt)
- Drop separate deferred drm_dev_put worker.
- Remove stale drain_workqueue(xe->destroy_wq) from guc_submit_sw_fini().
v4:
- Replace the guc_submit_sw_fini() wait with an assertion and remove
the now-unused fini_wq. (sashiko)
v5:
- Move destroy work to a module-lifetime Xe workqueue instead of
system_dfl_wq. (Matt)
- Flush the module-lifetime destroy workqueue during PCI remove to
preserve the old device-remove wait semantics.
v6:
- Keep SVM pagemap destroy work on the per-device destroy_wq to avoid
letting it outlive the xe_device/drm_device. (Sashiko)
- Use WQ_MEM_RECLAIM for xe->destroy_wq because SVM pagemap destroy work
can be queued from the reclaim path.
v7:
- Drop the per-device xe->destroy_wq and use the module-level destroy WQ
for SVM pagemap destroy as well. (Matt)
- Rename xe_exec_queue_destroy_wq_*() helpers to xe_destroy_wq_*()
helpers because the WQ is no longer exec-queue specific. (Matt)
v8:
- Rebase.
v9:
- Keep SVM pagemap destroy work on the per-device WQ_MEM_RECLAIM
destroy_wq because it can be queued from reclaim and embeds
the dev_pagemap used by devres teardown. (Sashiko)
- Keep the module-level destroy WQ GuC-only and drop WQ_MEM_RECLAIM
from it.
- Update the module-WQ kdoc to document the GuC/SVM split.
v10:
- Keep xe->destroy_wq per-cpu while adding WQ_MEM_RECLAIM to fix the
workqueue allocation warning.
v11:
- Drop the SVM pagemap destroy comment as it was revision-specific.
(Thomas)
v12:
- Rebase.
Fixes: 2d2be279f1 ("drm/xe: fix UAF around queue destruction")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Link: https://patch.msgid.link/20260716062624.211396-1-arvind.yadav@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit da1124abac)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The scheduler keeps a pointer to the timeline name, but q->name
is freed with the exec queue while scheduler fences can still
reference it.
Store the name in struct xe_guc_exec_queue so it shares
the scheduler's RCU-deferred lifetime.
Fixes: 6bd90e700b ("drm/xe: Make dma-fences compliant with the safe access rules")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260714064402.2457257-1-arvind.yadav@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 41075f0eb5)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
xe_pt_update_ops_init() fails to reset current_op to 0. On the
vm_bind path, ops_execute() calls xe_pt_update_ops_prepare() inside
the xe_validation_guard() / drm_exec_until_all_locked() loop. When
that loop retries due to lock contention or OOM eviction
(drm_exec_retry_on_contention() / xe_validation_retry_on_oom()),
xe_pt_update_ops_prepare() runs again on the same vops, and each
call to bind_op_prepare() increments current_op without resetting it.
After N retries current_op exceeds the array size allocated by
xe_vma_ops_alloc(), causing an out-of-bounds write into
SLUB-poisoned memory and a subsequent UAF crash in
xe_migrate_update_pgtables_cpu() when reading the corrupted pt_op->bind.
Also reset needs_svm_lock and needs_invalidation which are derived in
the same prepare pass and would otherwise cause wrong migrate ops
selection and redundant TLB invalidation on retry.
Fix this by resetting current_op, needs_svm_lock and needs_invalidation
in xe_pt_update_ops_init().
v2 (Matt):
- Add details in commit message.
- Add Fixes tag and Cc to stable@vger.kernel.org
Fixes: e8babb280b ("drm/xe: Convert multiple bind ops into single job")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org
Assisted-by: GitHub-Copilot:claude-sonnet-4.6
Signed-off-by: Zongyao Bai <zongyao.bai@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260714232433.2737533-1-zongyao.bai@intel.com
(cherry picked from commit 046045543e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Starting on LNL the WOPCM size is 8MB instead of 4, so we need to avoid
using the [0, 8MB) range of the GGTT as that can be unaccessible from
the microcontrollers.
Note that the proper long-term fix here is to read the WOPCM size from
the HW, but that is a more serious rework that would be difficult to
backport, so we can do that as a follow-up.
Fixes: 9c57bc0865 ("drm/xe/lnl: Drop force_probe requirement")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260713221758.3285744-2-daniele.ceraolospurio@intel.com
(cherry picked from commit 3033b0b24e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
xe_bo_move() attaches VF CCS read/write batch buffers (BBs) to a BO
after it transitions NULL/SYSTEM -> TT, and detaches them after it
transitions TT -> SYSTEM. Both operations were done synchronously on
the CPU immediately after building the move's copy/clear fence,
without waiting for that fence to signal. This creates two races with
VF migration:
- Attach happens too late relative to the copy job it is meant to
protect. If the copy job is submitted before the CCS BBs are
attached, a VF migration event that pauses execution mid-copy can
observe partially copied CCS metadata without the attach state
needed to correctly save/restore it.
- Detach happens too early relative to the copy job that moves data
out of TT. The CCS BBs are torn down right after the copy fence is
obtained, while the actual blit may still be in flight. A VF
migration event that pauses execution mid-copy can then race the
save/restore path against the still-running blit, and the CCS BBs
it would need to make sense of the paused state have already been
removed.
Fix both races:
- Move the attach call to before the copy/clear job is submitted, so
the CCS BBs are already registered by the time the copy runs. On
attach failure, unwind and bail out of the move. xe_migrate_ccs_rw_copy()
now takes the destination resource explicitly, since bo->ttm.resource
is not updated to the new resource until after the move commits.
- Detach only after explicitly waiting for the copy fence to signal,
instead of tearing down the CCS BBs immediately after obtaining it.
While here, also fix xe_sriov_vf_ccs_attach_bo() to properly unwind and
propagate errors: the per-context loop previously never broke out on
error, silently discarding earlier failures. Unwind by clearing each
attached context directly via xe_migrate_ccs_rw_copy_clear() instead of
reusing xe_sriov_vf_ccs_detach_bo(), which requires both contexts to be
attached before it will clean up either one.
Fixes: 864690cf4d ("drm/xe/vf: Attach and detach CCS copy commands with BO")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Assisted-by: GitHub_Copilot:claude-sonnet-5
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260714062440.3421225-1-matthew.brost@intel.com
(cherry picked from commit d45ad0aa7a)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The witable override should be set when FDO_MODE bit is enabled.
Fix the comparison to distingush this case from legacy systems
where bit should be disabled to have override.
Cc: stable@vger.kernel.org
Fixes: 9dde74fd9e ("drm/xe/nvm: enable cri platform")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260714-cri_nvm_fdo_flip-v2-1-14580e71b58e@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 2007be18d2)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
An imported dma-buf BO is created as a ttm_bo_type_sg BO whose
reservation object is the exporter's dma_buf->resv. The importer,
however, only takes a dma-buf reference after a successful
dma_buf_dynamic_attach(). Until then nothing keeps the exporter alive,
so if the exporter is freed while the BO still references its resv, a
later access to that resv is a use-after-free:
Oops: general protection fault, probably for non-canonical address
0x6b6b6b6b6b6b6b9c
Workqueue: ttm ttm_bo_delayed_delete [ttm]
RIP: 0010:mutex_can_spin_on_owner+0x3f/0xc0
This can be reached on two paths:
- dma_buf_dynamic_attach() fails, or
- ttm_bo_init_reserved() fails during BO creation.
In both cases the BO already has bo->base.resv pointing at the exporter
resv, and sg BOs are always torn down via ttm_bo_delayed_delete(), which
locks bo->base.resv asynchronously - potentially after the exporter has
been freed.
Take the dma-buf reference in xe_bo_init_locked(), before
ttm_bo_init_reserved(), so it also covers a creation failure there, and
release it in xe_ttm_bo_destroy(). The reference is held for the whole
BO lifetime, keeping the shared resv alive on every path.
v2:
- Reworked the fix to avoid creating the imported sg BO before
dma_buf_dynamic_attach() succeeds.
- Attach with importer_priv == NULL and make invalidate_mappings ignore
incomplete imports.
v3:
- Dropped the xe-side reordering approach since importer_priv must be
valid when dma_buf_dynamic_attach() publishes the attachment.
- Per Christian's suggestion on the v1 thread, keyed the check on
import_attach rather than removing the sg guard entirely.
- Fixes both xe and amdgpu in a single TTM patch.
v4:
- Moved import_attach check to after dma_resv_copy_fences() so fences
are copied before returning for successful imports (Thomas).
- Removed exporter-alive claim from commit message (Thomas).
v5:
- Add drm/xe patch to keep imported sg BOs off the LRU before attach
succeeds; the TTM fix alone is not sufficient for xe if the BO is
already LRU-visible. (Thomas)
v4 patch:
https://patchwork.freedesktop.org/patch/736663/?series=169129&rev=2
- Patch 1 (drm/ttm) carries Christian's Reviewed-by from v4.
v6:
- Reworked the fix based on Thomas' suggestion. Instead of the TTM resv
individualization (v1-v5) plus the xe off-LRU/placement handling (v5),
just hold a dma-buf reference for the imported BO lifetime so the
shared resv can never be freed while the BO still references it.
Single xe patch, no TTM change. (Thomas)
- Take the reference in xe_bo_init_locked() before ttm_bo_init_reserved()
so a TTM creation failure is covered too (Thomas).
- Dropped the v5 series (drm/ttm + drm/xe off-LRU); the off-LRU approach
also regressed in CI BAT via ttm_bo_pipeline_gutting() creating a ghost
BO that outlived the exporter.
Link to v5: https://patchwork.freedesktop.org/series/169984/
v7:
- Move changelog above --- so it stays in the commit message.
- Reorder changelog entries oldest-to-newest. (Thomas)
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/8023
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Cc: Christian Konig <christian.koenig@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Suggested-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260710191027.260160-2-nitin.r.gote@intel.com
(cherry picked from commit 3516f3fae6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
When prefetch region is DRM_XE_CONSULT_MEM_ADVISE_PREF_LOC for a BO VMA,
the code used it as an index into region_to_mem_type[], causing an
out-of-bounds access since the value is -1.
Resolve the preferred location for BO VMAs directly: local VRAM on dGFX
(using the BO's tile placement) or system memory on iGPU.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
-Fix null dereference
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: c1bb69a2e8 ("drm/xe/svm: Consult madvise preferred location in prefetch")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20260624174943.2808767-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
(cherry picked from commit d9a4906ac0)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
drmm_mutex_init() can fail while registering the managed cleanup action.
When that happens, drmm_add_action_or_reset() destroys the mutex before
returning the error. Continuing initialization would therefore leave the
debugfs GEM object list with an unusable lock.
Propagate the error as is already done for the other managed mutexes in
panthor_device_init().
Fixes: a3707f53eb ("drm/panthor: show device-wide list of DRM GEM objects over DebugFS")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260713082912.321021-1-lilinmao@kylinos.cn
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
panthor_fw_load() detects truncated firmware images, but jumps to the
common cleanup path without setting ret. If no previous error was recorded,
the function can return 0 and treat the invalid firmware as successfully
loaded.
Set ret to -EINVAL before leaving the truncated-image path.
Fixes: 2718d91816 ("drm/panthor: Add the FW logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20260714163056.22329-1-osama.abdelkader@gmail.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
drm_gpusvm_get_pages() only stored the local dpagemap into
svm_pages->dpagemap on the success path. If a later page failed (e.g.
-EOPNOTSUPP when ctx->allow_mixed is false) and jumped to err_unmap,
svm_pages->dpagemap was still NULL, so __drm_gpusvm_unmap_pages() skipped
device_unmap() and leaked the device mappings already created.
Assign svm_pages->dpagemap when the first device page is mapped so the
err_unmap path can device_unmap() those mappings.
This issue was found by Sashiko AI review.
Fixes: f70da6f99d ("drm/gpusvm: pull out drm_gpusvm_pages substructure")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260701062800.409248-4-honghuan@amd.com
In a mixed range: ctx->allow_mixed dpagemap is not NULL while some entries
are system pages. The unmap loop used:
dma_unmap_page(...);
else if (dpagemap && dpagemap->ops->device_unmap)
dpagemap->ops->device_unmap(...);
When use_iova is true the first condition is false for system pages,
so they fall through to device_unmap() and a system DMA address is
handed to the device specific unmap callback, risking invalid accesses
or state corruption.
Key the branch off addr->proto instead: system pages only need an explicit
dma_unmap_page() in the non IOVA case, IOVA system pages are already torn
down by the single dma_iova_destroy(), and only genuine device pages
reach device_unmap().
This issue was found by Sashiko AI review.
Fixes: 37ad039fb3 ("drm/gpusvm: Use dma-map IOVA alloc, link, and sync API in GPU SVM")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260701062800.409248-3-honghuan@amd.com
dma_iova_try_alloc() reserves IOVA for the entire range, but in a mixed
range only the system pages are linked (their total size is state_offset)
while device pages never touch the IOVA state. dma_iova_destroy() with
state_offset only frees the linked part, permanently leaking the IOVA
reserved for the device pages and eventually exhausting the IOVA space.
Unlink the linked system-page portion and free the whole reserved IOVA
instead. On the get_pages() error path state_offset is 0 (no page linked,
dma_addr[0] unpopulated), so skip the unlink and just free the reservation;
this also avoids reading the uninitialized dma_addr[0].dir there.
Allocate the dma_addr array with the zeroing kvzalloc_objs() so every entry
has a well-defined value.
This issue was found by Sashiko AI review.
Fixes: 37ad039fb3 ("drm/gpusvm: Use dma-map IOVA alloc, link, and sync API in GPU SVM")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260701062800.409248-2-honghuan@amd.com
Commit 16df4cc63c ("drm/i915/display: Use ceiling division for NV12
UV surface offset calculation") computes the UV (chroma) surface
start/size as ceiling(half of Y plane start/size) directly from the
U16.16 fixed-point source rectangle:
x = fp_16_16_to_int_ceil(fp_16_16_div2(src.x1));
For a single pipe the source coordinates are integers, so this is
correct.
(UV start = ceiling(half of Y plane start)).
With bigjoiner + a plane scaler the picture changes. The pipe boundary
is a fixed integer destination pixel, but the plane's position and the
scaler ratio are arbitrary, so drm_rect_clip_scaled() maps the seam back
to a *fractional* per-pipe source. For a 1280->2407 upscaled NV12 plane
crossing the seam:
master src: width = 1204 * 1280/2407 = 640.265899, x1 = 0
joiner src: width = 1203 * 1280/2407 = 639.734115, x1 = 640.265884
The luma path floors this to an integer (src.x1 >> 16 = 640), but the
UV path takes ceiling(640.265884 / 2) = ceil(320.13) = 321. The Y plane
then starts at column 640 while the UV plane starts at 321*2 = 642,
pushing the chroma read one column past the 640-wide chroma surface on
the joiner secondary:
[CRTC:382:pipe C] PLANE ATS fault
[CRTC:382:pipe C][PLANE:267:plane 1C] fault (CTL=0x81009400, ...)
The spec "Y plane start" is the integer pixel the luma surface actually
programs (640), not the pre-floor fixed-point value (640.27). Convert
the Y plane start/size to integer first - matching skl_check_main_surface()
- and then apply the ceiling. This is a no-op for the integer (non-joiner)
case and yields the correct, in-bounds chroma offset for the fractional
joiner seam:
before fix after fix
master 1B: x=0 w=321 x=0 w=320 -> [0, 320)
slave 1C: x=321 w=320 x=320 w=320 -> [320, 640)
The two halves now tile the 640-wide chroma plane exactly and the ATS
fault is gone.
Assisted-by: GitHub-Copilot:Claude-Opus-4.8
Fixes: 16df4cc63c ("drm/i915/display: Use ceiling division for NV12 UV surface offset calculation")
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20260618181837.687302-1-vidya.srinivas@intel.com
(cherry picked from commit 0c59cc7824)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
intel_engine_user.c checks CONFIG_DRM_I915_SELFTESTS before running
the engine UABI isolation check. Kconfig defines DRM_I915_SELFTEST,
without the trailing "S", and the rest of i915 uses
CONFIG_DRM_I915_SELFTEST.
Because CONFIG_DRM_I915_SELFTESTS is not backed by any Kconfig symbol,
the IS_ENABLED() test is always false. Use the existing selftest symbol
so the debug/selftest guarded path can be reached when selftests are
enabled.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the Kconfig definition and the inconsistent
guard in intel_engine_user.c.
Fixes: 750e76b4f9 ("drm/i915/gt: Move the [class][inst] lookup for engines onto the GT")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260705080225.436-1-pengpeng@iscas.ac.cn
(cherry picked from commit 14a2012a49)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A probe-time deadlock can occur between the dequeue worker and
drm_client_register(). During probe, drm_client_register() holds
clientlist_mutex and calls the fbdev hotplug callback, which triggers an
atomic commit that ends up sleeping in virtio_gpu_queue_ctrl_sgs()
waiting for virtqueue space. The dequeue worker that would free that
space calls virtio_gpu_cmd_get_display_info_cb(), which invokes
drm_kms_helper_hotplug_event() -> drm_client_dev_hotplug(), attempting
to acquire the same clientlist_mutex. Since wake_up() is only called
after the resp_cb loop, the probe thread is never woken and both threads
deadlock.
Fix this by removing the hotplug notification from
virtio_gpu_cmd_get_display_info_cb(). The display data (outputs[i].info)
is still updated synchronously in the callback.
For the init path, drm_client_register() already fires an initial
hotplug when the client is registered, which picks up the connector
state updated by display_info_cb.
For the runtime config_changed path, add a wait_event_timeout() in
config_changed_work_func() so that display_info_cb updates the connector
data before the hotplug notification is sent. Also replace
drm_helper_hpd_irq_event() with drm_kms_helper_hotplug_event() since
virtio-gpu never calls drm_kms_helper_poll_init() and thus
drm_helper_hpd_irq_event() always returns false without doing anything.
Fixes: 27655b9bb9 ("drm/client: Send hotplug event after registering a client")
Closes: https://syzkaller.appspot.com/bug?id=d6dd6f86d3aaf7eebe7406e45c1c6e549453f224
Closes: https://syzkaller.appspot.com/bug?id=908bd910da5dd79b88de4cf7baf376cc873a922e
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260713-virtiogpu_syzbot-v2-1-2958fa37d46d@redhat.com
Applies the same treatment as commit 7cf6dd467e ("drm/virtio:
Don't attach GEM to a non-created context in gem_object_open()")
to virtio_gpu_gem_object_close() to avoid trying to detach
a resource that was never attached due to a context
never being created when context_init is supported.
Fixes: 086b9f27f0 ("drm/virtio: Don't create a context with default param if context_init is supported")
Cc: <stable@vger.kernel.org> # v6.14+
Signed-off-by: Jason Macnak <natsu@google.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260625170828.3335431-1-natsu@google.com
This contains two fixes, one for a bad error unwinding path and another
for an #ifdef block that wasn't covering all the combinations correctly.
-----BEGIN PGP SIGNATURE-----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=W7hq
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-7.2-pmc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
soc/tegra: pmc: Fixes for v7.2
This contains two fixes, one for a bad error unwinding path and another
for an #ifdef block that wasn't covering all the combinations correctly.
* tag 'tegra-for-7.2-pmc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: fix #ifdef block in header
drm/tegra: Fix a strange error handling path
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We've had an unknown Turing issue for a while with page faults since
large pages and compression.
I've got a patch series that syncs all our L2 handling with ogkm and it
made this fault happen more.
After writing a bunch of debugging patches, I spotted an invalid LPT
entry where there should have been a valid one.
A 64K MAP succeeds on a range, but a subsequent SPT put drops SPT refs
across multiple ranges,
We shouldn't assume all ranges where SPTEs go away will have the same
sparse/invalid/valid state, just iterate over each instead and do the
right thing.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes: d19512f5ab ("nouveau/vmm: start tracking if the LPT PTE is valid. (v6)")
Link: https://patch.msgid.link/20260615044737.3419585-1-airlied@gmail.com
[ Properly format commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
(cherry picked from commit d008141ed4)
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm-misc-fixes for v7.2-rc3:
- Fix uaf in amdxdna mmap failure path.
- A lot of deadlocks, access races and return value fixes in amdxdna.
- Fix analogix_dp bitshifts during link training.
- Use direct label in drm_exec.
- Fix absent indirect bo handling in v3d.
- Sync on first active crtc in fb_dirty, rather than first crtc.
- Rework try_harder in the buddy allocator.
- Make imagination function static to solve compiler warning.
- Fix imagination error checking.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/71e5b48b-307f-47f5-8fd5-b60ea43e4196@linux.intel.com
The pvr_fw_trace_init_mask_ops is not used outside pvr_fw_trace.c
so make it static to avoid the following sparse warning:
drivers/gpu/drm/imagination/pvr_fw_trace.c:74:31: warning: symbol 'pvr_fw_trace_init_mask_ops' was not declared. Should it be static?
Fixes: c6978643ea ("drm/imagination: Validate fw trace group_mask")
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://patch.msgid.link/20260703162338.2848039-1-ben.dooks@codethink.co.uk
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
The try_harder contiguous fallback could return a range whose start
offset did not match the caller's min_block_size. When a candidate's
start is misaligned, realign it: free the misaligned run and reallocate
exactly @size at the next lower min_block_size boundary. This keeps the
returned size unchanged with no surplus to trim, and rejects the request
only when no aligned candidate fits.
v2: align misaligned candidates down to min_block_size instead of
bailing out, for both the RHS and LHS paths (Matthew).
Fixes: 0a1844bf0b ("drm/buddy: Improve contiguous memory allocation")
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Tested-by: John Olender <john.olender@gmail.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20260709131050.1022759-1-Arunpravin.PaneerSelvam@amd.com
When CONFIG_DRM_GPUSVM=n (e.g. um-allyesconfig), the only caller of
xe_pt_svm_userptr_notifier_lock() is compiled out, triggering:
drivers/gpu/drm/xe/xe_pt.c:1418:13: warning:
'xe_pt_svm_userptr_notifier_lock' defined but not used
[-Wunused-function]
The helpers cannot simply be removed in this case: the matching
xe_pt_svm_userptr_notifier_unlock() is also referenced from
xe_pt_update_ops_run(), which lives outside any DRM_GPUSVM ifdef and is
gated only at runtime by pt_update_ops->needs_svm_lock. The symbol must
exist in all builds.
Provide empty static inline stubs for !DRM_GPUSVM, matching the pattern
used by xe_svm_notifier_lock()/_unlock() in xe_svm.h.
Fixes: dca6e08c92 ("drm/xe/userptr: Hold notifier_lock for write on inject test path")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606302210.QqcLbOEN-lkp@intel.com/
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260630192221.2998168-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 3359422bf0)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
xe_vm_madvise_ioctl() allocates madvise_range.vmas in get_vmas().
After get_vmas() succeeds with at least one VMA, error paths must go
through free_vmas so the array is released before the madvise details are
destroyed.
The L2 flush validation path added for PAT madvise rejects some
SVM/userptr ranges after get_vmas() has succeeded, but jumps directly to
madv_fini. This skips kfree(madvise_range.vmas), leaking the VMA array on
each failed ioctl.
Jump to free_vmas instead, matching the other validation failure paths
after get_vmas() has succeeded.
Fixes: 4f39a194d4 ("drm/xe/xe3p_lpg: Restrict UAPI to enable L2 flush optimization")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260708073422.725186-1-lgs201920130244@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit c3a1c3579b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
xe_pci.c includes <kunit/test-bug.h> twice, separated only by the
<kunit/test.h> include. Drop the redundant second include; this is a
non-functional cleanup flagged by scripts/checkincludes.pl.
Fixes: 6cad22853c ("drm/xe/kunit: Add stub to read_gmdid")
Signed-off-by: Anas Khan <anxkhn28@gmail.com>
Link: https://patch.msgid.link/20260702112820.34675-1-anxkhn28@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 84ed5b0a92)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
