All the PPS register users have been converted to struct
intel_display. The backward compat conversion to struct drm_i915_private
is no longer needed. Drop it, along with the include, and convert the
dev_priv macro parameter names to display while at it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/4c23fd8dfcadefeeb52189045421084bcfd50d57.1747128495.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently we are seeing these on PTL:
xe 0000:00:02.0: [drm] *ERROR* Timeout waiting for DDI BUF A to get active
These seem to be caused by writing ALPM registers while Panel Replay is
enabled.
Fix this by writing ALPM registers only when Panel Replay is about to be
enabled.
v4: improve comment on intel_psr_panel_replay_enable_sink call
v3: enable/disable ALPM from PSR code
Fixes: 172757acd6 ("drm/i915/lobf: Add lobf enablement in post plane update")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-3-jouni.hogander@intel.com
We want to enable sink ALPM from PSR code. Make intel_alpm_enable_sink
available for PSR.
v2: do not add kerneldoc comments
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-2-jouni.hogander@intel.com
i.MX8qxp Display Controller(DC) is comprised of three main components that
include a blit engine for 2D graphics accelerations, display controller for
display output processing, as well as a command sequencer. Add kernel
mode setting support for the display controller part with two CRTCs and
two primary planes(backed by FetchLayer and FetchWarp respectively). The
registers of the display controller are accessed without command sequencer
involved, instead just by using CPU. The command sequencer is supposed to
be used by the blit engine.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250414035028.1561475-13-victor.liu@nxp.com
i.MX8qxp Display Controller has a built-in interrupt controller to support
Enable/Status/Preset/Clear interrupt bit. Add driver for it.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250414035028.1561475-12-victor.liu@nxp.com
i.MX8qxp Display Controller pixel engine consists of all processing
units that operate in the AXI bus clock domain. Add drivers for
ConstFrame, ExtDst, FetchLayer, FetchWarp and LayerBlend units, as
well as a pixel engine driver, so that two displays with primary
planes can be supported. The pixel engine driver and those unit
drivers are components to be aggregated by a master registered in
the upcoming DRM driver.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-11-victor.liu@nxp.com
i.MX8qxp Display Controller display engine consists of all processing
units that operate in a display clock domain. Add minimal feature
support with FrameGen and TCon so that the engine can output display
timings. The FrameGen driver, TCon driver and display engine driver
are components to be aggregated by a master registered in the upcoming
DRM driver.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-10-victor.liu@nxp.com
This patch is based on the commit 73eb5476df ("drm: rcar-du: Support
panels connected directly to the DPAD outputs").
The RZ DU driver assumes that a bridge is always connected to the DU
output. This is valid for the HDMI output, but the DPAD output can be
connected directly to a panel, in which case no bridge is available.
To support this use case, detect whether the entities connected to the DU
DPAD output is encoders or panels based on the number of ports of their DT
node, and retrieve the corresponding type of DRM objects. For panels,
additionally create panel bridge instances.
Signed-off-by: hienhuynh <hien.huynh.px@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250508095042.25164-1-biju.das.jz@bp.renesas.com
Since commit 21aa27ddc5 ("drm/shmem-helper: Switch to reservation
lock"), the drm_gem_shmem_vmap and drm_gem_shmem_vunmap functions
require that the caller holds the DMA reservation lock for the object.
Add lockdep assertions to help validate this.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250318-drm-gem-shmem-v1-1-64b96511a84f@collabora.com
The xe buffer object shrinker name is visible in the
<debugfs>/shrinker directory and most if not all other shinkers
follow a naming convention that looks like
<subsystem>-<driver>_<objects>:<unique>
Follow the same convention for xe, changing the name to
drm-xe_gem:<unique>.
Other shrinkers typically use the device node for <unique> but
since drm drivers typically don't have a single unique device-
node, instead use the unique name in the drm device.
Fixes: 00c8efc318 ("drm/xe: Add a shrinker for xe bos")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://lore.kernel.org/r/20250508112931.3347-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 243bf99e2f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
It's expected that we'll encounter temporary exceptions
during aux transactions. Adjust logging from drm_info to
drm_dbg_dp to prevent flooding with unnecessary log messages.
Fixes: 3637e457eb ("drm/amd/display: Fix wrong handling for AUX_DEFER case")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250513032026.838036-1-Wayne.Lin@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9a9c3e1fe5)
Cc: stable@vger.kernel.org
Similar to commit 6a057072dd ("drm/amd/display: Fix null check for
pipe_ctx->plane_state in dcn20_program_pipe") that addresses a null
pointer dereference on dcn20_update_dchubp_dpp. This is the same
function hooked for update_dchubp_dpp in dcn401, with the same issue.
Fix possible null pointer deference on dcn401_program_pipe too.
Fixes: 63ab80d9ac ("drm/amd/display: DML2.1 Post-Si Cleanup")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8d47f7397)
[Why & How]
When MST config is unplugged/replugged too quickly, it can potentially
result in a scenario where previous DC state has not been reset before
the HPD link detection sequence begins. In this case, driver will
disable the streams/link prior to re-enabling the link for link
training.
There is a bug in the current logic that does not account for the fact
that current_state can be released and cleared prior to swapping to a
new state (resulting in the pipe_ctx stream pointers to be cleared) in
between disabling streams.
To resolve this, cache the original streams prior to committing any
stream updates.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1561782686)
[Why & How]
Instead of dropping DRR updates, defer them. This fixes issues where
monitor continues to see incorrect refresh rate after VRR was turned off
by userspace.
Fixes: 32953485c5 ("drm/amd/display: Do not update DRR while BW optimizations pending")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3546
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: John Olender <john.olender@gmail.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 53761b7ecd)
Cc: stable@vger.kernel.org
This reverts commit 756c85e4d0 ("drm/amd/display: Enable urgent latency adjustment on DCN35")
Reason for revert: Negative power impact.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9334c491cd)
[Why]
Now forcing aux->transfer to return 0 when incomplete AUX write is
inappropriate. It should return bytes have been transferred.
[How]
aux->transfer is asked not to change original msg except reply field of
drm_dp_aux_msg structure. Copy the msg->buffer when it's write request,
and overwrite the first byte when sink reply 1 byte indicating partially
written byte number. Then we can return the correct value without
changing the original msg.
Fixes: 3637e457eb ("drm/amd/display: Fix wrong handling for AUX_DEFER case")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7ac37f0dcd)
Cc: stable@vger.kernel.org
On GFX1151, the reported MALL cache size reflects only
half of its actual size; this adjustment corrects the discrepancy.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0a5c060b59)
Cc: stable@vger.kernel.org
After process exit to unmap csa and free GPU vm, if signal is accepted
and then waiting to take vm lock is interrupted and return, it causes
memory leaking and below warning backtrace.
Change to use uninterruptible wait lock fix the issue.
WARNING: CPU: 69 PID: 167800 at amd/amdgpu/amdgpu_kms.c:1525
amdgpu_driver_postclose_kms+0x294/0x2a0 [amdgpu]
Call Trace:
<TASK>
drm_file_free.part.0+0x1da/0x230 [drm]
drm_close_helper.isra.0+0x65/0x70 [drm]
drm_release+0x6a/0x120 [drm]
amdgpu_drm_release+0x51/0x60 [amdgpu]
__fput+0x9f/0x280
____fput+0xe/0x20
task_work_run+0x67/0xa0
do_exit+0x217/0x3c0
do_group_exit+0x3b/0xb0
get_signal+0x14a/0x8d0
arch_do_signal_or_restart+0xde/0x100
exit_to_user_mode_loop+0xc1/0x1a0
exit_to_user_mode_prepare+0xf4/0x100
syscall_exit_to_user_mode+0x17/0x40
do_syscall_64+0x69/0xc0
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7dbbfb3c17)
Cc: stable@vger.kernel.org
It's expected that we'll encounter temporary exceptions
during aux transactions. Adjust logging from drm_info to
drm_dbg_dp to prevent flooding with unnecessary log messages.
Fixes: 3637e457eb ("drm/amd/display: Fix wrong handling for AUX_DEFER case")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250513032026.838036-1-Wayne.Lin@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The kthread header doesn't need to be included anymore. It's a relict
from commit a6149f0393 ("drm/sched: Convert drm scheduler to use a
work queue rather than kthread").
Remove the unneeded includes.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250314101023.111248-3-phasta@kernel.org
The GPU scheduler's comments refer to a "thread" at various places.
Those are leftovers from commit a6149f0393 ("drm/sched: Convert drm
scheduler to use a work queue rather than kthread").
Replace all references to kthreads.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250314101023.111248-2-phasta@kernel.org
Atm, on an MST link in DSC mode
intel_dp_compute_config_link_bpp_limits() calculates the maximum link
bpp limit using the MST root connector's DSC capabilities. That's not
correct in general: the decompression could be performed by a branch
device downstream of the root branch device or the sink itself.
Fix the above by passing to intel_dp_compute_config_link_bpp_limits()
the actual connector being modeset, containing the correct DSC
capabilities.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 1c5b72daff ("drm/i915/dp: Set the DSC link limits in intel_dp_compute_config_link_bpp_limits")
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-2-imre.deak@intel.com
(cherry picked from commit 266e2fcfe2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This patch enables per-queue and per-pipe reset functionality for
GFX IP v9.5.0 when using MEC firmware version 21 (0x15) or later.
This change:
1. Refactors the pipe reset support check in gfx_v9_4_3_pipe_reset_support()
to use the compute_supported_reset flags instead of hardcoding
version checks.
2. Adds support for GFX9.5.0 (IP 9.5.0) with MEC firmware version >= 21
to enable per-queue and per-pipe reset capabilities.
v2: Replaced mec version check with !!(adev->gfx.compute_supported_reset & AMDGPU_RESET_TYPE_PER_PIPE) (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set vram type so we can take different actions according to the type.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the code more general, user doesn't need to pay attention to the
detail of flip bits setting.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The major of dcn and dce irqs share a copy-pasted collection
of copy-pasted function, which is: hpd_ack.
This patch removes the multiple copy-pasted by moving them to
the irq_service.c and make the irq_service's
calls the functions implemented by the irq_service.c
instead.
The hpd_ack function is replaced by hpd0_ack and hpd1_ack, the
required constants are also added.
The changes were not tested on actual hardware. I am only able
to verify that the changes keep the code compileable and do my
best to look repeatedly if I am not actually changing any code.
Signed-off-by: Sebastian Aguilera Novoa <saguileran@ime.usp.br>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to commit 6a057072dd ("drm/amd/display: Fix null check for
pipe_ctx->plane_state in dcn20_program_pipe") that addresses a null
pointer dereference on dcn20_update_dchubp_dpp. This is the same
function hooked for update_dchubp_dpp in dcn401, with the same issue.
Fix possible null pointer deference on dcn401_program_pipe too.
Fixes: 63ab80d9ac ("drm/amd/display: DML2.1 Post-Si Cleanup")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The number of newly added de counts and the number of
newly added error addresses remain consistent
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit ded8b3c36f17 ("drm/amdgpu: properly handle GC vs MM in amdgpu_vmid_mgr_init()")
enables all 16 vmids for MMHUB on GC 10 and newer for KGD since
there are no KFD resources using MMHUB. With this change, KFD
starts seeing MMHUB vmids in it's range with no pasid set. As
such there is no need to warn, we can just ignore those interrupts.
Fixes: aded8b3c36 ("drm/amdgpu: properly handle GC vs MM in amdgpu_vmid_mgr_init()")
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During driver load, RAS event manager may not be initialized. This will
cause any ATHUB event during driver load to be skipped in dmesg log. Log
the error in dmesg log for easier diagnosis.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This resolves a deadlock between user queue management and GPU reset
paths by enforcing consistent lock ordering.
The deadlock occurred when:
1. Process exit path (amdgpu_userq_mgr_fini) would:
- Take uqm->userq_mutex
- Then try to take adev->userq_mutex for list operations
2. GPU reset path (amdgpu_userq_pre_reset) would:
- Take adev->userq_mutex first (for list traversal)
- Then take uqm->userq_mutex
The solution establishes a strict top-down locking order:
1. Always take adev->userq_mutex before any uqm->userq_mutex
2. Maintain this order consistently across all code paths
Changes made:
- Reordered locking in amdgpu_userq_mgr_fini() to take device lock first
- Kept existing proper order in amdgpu_userq_pre_reset()
- Simplified the fini flow by removing redundant operations
This prevents circular dependencies while maintaining thread safety
during both normal operation and GPU reset scenarios.
Fixes: 4ce60dbada ("drm/amdgpu: store userq_managers in a list in adev")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get RAS retire flip bits for HBM with different types in various NPS modes.
Also set flip row bit and MCA R13 bit in PA in different NPS modes.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RAS bad page retire flip bits can be set per vram type,
vram vendor and NPS mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the general interface to get flip bits for RAS bad page retirement.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn v5_0_0 register offset and shift masks
header files
Only include the registers required for MMSCH
initialization
Signed-off-by: fanhuang <FangSheng.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Per UMC address conversion algorithm, the high row bits of UMC MCA
address are changed when they're converted into normalized address
on specific ASICs.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support new version of HBM.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
there is only MCA records in V3, no need to care about PA records.
recalculate the value of ras_num_bad_pages when parsing failed and
go on with the left records instead of quit.
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Early EQ pattern sequence is required for some LTTPR + old dongle
combinations.
[HOW]
If DP_EARLY_8B10B_TPS2 chip cap is set, this new sequence programs phy
to output TPS2 before initiating link training and writes TPS1 to
LTTPR training pattern register as instructed by vendor.
Add function to get embedded LTTPR target address offset.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: TungYu Lu <tungyu.lu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Triplebuffer should be programmed on all pipes.
Some code assumed it only needed to be called on top
pipe, but as the HWSS function does not account
for that, it must be called on every pipe.
[HOW]
Remove condition to not program triplebuffer
on non-top/next pipe. Call the function
unconditionally on all pipes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>