Follow the changes in the commit a2649952f6 ("drm/msm/dpu: remove
DPU_CTL_SPLIT_DISPLAY from CTL blocks on DPU >= 5.0") and remove
DPU_CTL_SPLIT_DISPLAY from the CTL blocks on the SAR2130P platform.
Single CTL is used for all interfaces used by a single path
Fixes: 1785751734 ("drm/msm/dpu: add catalog entry for SAR2130P")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/651883/
Link: https://lore.kernel.org/r/20250506-dpu-sar2130p-no-split-display-v1-1-b619c0fddea5@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Drop comments about SoC before each 'struct dpu_lm_sub_blks' for given
SoC because it's duplicating the actual name of structure.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651251/
Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-11-8cab30c3e4df@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The set_active_pipes() callback configures CTL_FETCH_PIPE_ACTIVE and
newer DPU v12.0 comes with CTL_PIPE_ACTIVE, thus rename it to
set_active_fetch_pipes() to better match the purpose.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651261/
Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-7-8cab30c3e4df@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The HDMI driver already has msm_hdmi_hpd_enable() and
msm_hdmi_hpd_disable() functions. Wire them into the
msm_hdmi_bridge_funcs, so that HPD can be enabled and disabled
dynamically rather than always having HPD events generation enabled.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-13-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
It is completely not obvious, but the so-called 'hpd' clocks and
regulators are required for the HDMI host to function properly. Merge
pwr and hpd regulators. Use regulators, clocks and pinctrl to implement
proper runtime PM callbacks.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651715/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-9-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The pm_runtime_get_sync() function is a bad choise for runtime power
management. Switch HDMI driver to pm_runtime_resume_and_get() and add
proper error handling, while we are at it.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651713/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-7-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The last platform using legacy clock names for HDMI block (APQ8064)
switched to new clock names in 5.16. It's time to stop caring about old
DT, drop hand-coded helpers and switch to clk_bulk_* API.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651716/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-6-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The only clock which has frequency being set through hpd_freqs is the
"core" aka MDSS_HDMI_CLK clock. It always has the specified frequency,
so we can drop corresponding clk_set_rate() call together with the
hpd_freq infrastructure.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651717/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-5-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
During post-migration recovery of a VF, it is necessary to update
GGTT references included in messages which are going to be sent
to GuC. GuC will start consuming messages after VF KMD will inform
it about fixups being done; before that, the VF KMD is expected
to update any H2G messages which are already in send buffer but
were not consumed by GuC.
Only a small subset of messages allowed for VFs have GGTT references
in them. This patch adds the functionality to parse the CTB send
ring buffer and shift addresses contained within.
While fixing the CTB content, ct->lock is not taken. This means
the only barrier taken remains GGTT address lock - which is ok,
because only requests with GGTT addresses matter, but it also means
tail changes can happen during the CTB fixups execution (which may
be ignored as any new messages will not have anything to fix).
The GGTT address locking will be introduced in a future series.
v2: removed storing shift as that's now done in VMA nodes patch;
macros to inlines; warns to asserts; log messages fixes (Michal)
v3: removed inline keywords, enums for offsets in CTB messages,
less error messages, if return unused then made functs void (Michal)
v4: update the cached head before starting fixups
v5: removed/updated comments, wrapped lines, converted assert into
error, enums for offsets to separate patch, reused xe_map_rd
v6: define xe_map_*_array() macros, support CTB wrap which divides
a message, updated comments, moved one function to an earlier patch
v7: renamed few functions, wider use on previously introduced helper,
separate cases in parsing messges, documented a static funct
v8: Introduced more helpers, fixed coding style mistakes
v9: Move xe_map*() functs to macros, add asserts, add debug print
v10: Errors in place of some asserts, style fixes
v11: Fixed invalid conditionals, added debug-only local pointer
v12: Removed redundant __maybe_unused
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512114018.361843-5-tomasz.lis@intel.com
Some GuC messages are constructed with incrementing dword counter
rather than referencing specific DWORDs, as described in GuC interface
specification.
This change introduces the definitions of DWORD numbers for parameters
which will need to be referenced in a CTB parser to be added in a
following patch. To ensure correctness of these DWORDs, verification
in form of asserts was added to the message construction code.
v2: Renamed enum members, added ones for single context registration,
modified asserts to check values rather than indexes.
v3: Reordered assert args to take less lines
v4: Added lengths
v5: Renamed MULTI_LRC_MSG_LEN to MULTI_LRC_MSG_MIN_LEN
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512114018.361843-4-tomasz.lis@intel.com
We have only one GGTT for all IOV functions, with each VF having assigned
a range of addresses for its use. After migration, a VF can receive a
different range of addresses than it had initially.
This implements shifting GGTT addresses within drm_mm nodes, so that
VMAs stay valid after migration. This will make the driver use new
addresses when accessing GGTT from the moment the shifting ends.
By taking the ggtt->lock for the period of VMA fixups, this change
also adds constraint on that mutex. Any locks used during the recovery
cannot ever wait for hardware response - because after migration,
the hardware will not do anything until fixups are finished.
v2: Moved some functs to xe_ggtt.c; moved shift computation to just
after querying; improved documentation; switched some warns to asserts;
skipping fixups when GGTT shift eq 0; iterating through tiles (Michal)
v3: Updated kerneldocs, removed unused funct, properly allocate
balloning nodes if non existent
v4: Re-used ballooning functions from VF init, used bool in place of
standard error codes
v5: Renamed one function
v6: Subject tag change, several kerneldocs updated, some functions
renamed, some moved, added several asserts, shuffled declarations
of variables, revealed more detail in high level functions
v7: Fixed typos, added `_locked` suffix to some functs, improved
readability of asserts, removed unneeded conditional
v8: Moved one function, removed implementation detail from kerneldoc,
added asserts
v9: Code shuffling without much change, and one param rename
v10: Minor error path change, added printing the shift via debugfs
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512114018.361843-3-tomasz.lis@intel.com
The balloon nodes, which are used to fill areas of GGTT inaccessible
for a specific VF, were allocated and inserted into GGTT within one
function. To be able to re-use that insertion code during VF
migration recovery, we need to split it.
This patch separates allocation (init/fini functs) from the insertion
of balloons (balloon/deballoon functs). Locks are also moved to ensure
calls from post-migration recovery worker will not cause a deadlock.
v2: Moved declarations to proper header
v3: Rephrased description, introduced "_locked" versions of some
functs, more lockdep checks, some functions renamed, altered error
handling, added missing kerneldocs.
v4: Suffixed more functs with `_locked`, moved lockdep asserts,
fixed finalization in error path, added asserts
v5: Renamed another few functs, used xe_ggtt_node_allocated(),
moved lockdep back again to avoid null dereference, added
asserts, improved comments
v6: Changed params of cleanup_ggtt()
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512114018.361843-2-tomasz.lis@intel.com
Enable using a fractional (compressed) link bpp on MST links, if this is
supported and the link bpp is forced. Fractional link bpps will be
enabled by default as a follow-up change after testing this
functionality within a set of commonly used MST monitors and docks/hubs
which support it.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-13-imre.deak@intel.com
Add support for forcing the link bpp on a connector via a connector
debugfs entry. During reducing link bpps due to a link BW limit, keep
bpps close to their forced value.
Add the debugfs entry to all relevant connectors: all DP connectors and
on an FDI link CRT/SDVO/LVDS/HDMI connectors.
v2:
- Move adding the debugfs entries to this patch.
- Rename i915_force_link_bpp to intel_force_link_bpp. (Jani)
- Select the relevant connectors via platform checks. (Jani)
- Use for_each_new_intel_connector_in_state(). (Jani)
- Fix 64 bit division vs. 32 bit build when converting str to q4. (lkp)
- Avoid division and addition overflow when converting str to q4.
v3:
- Add TODO: to make the non-DSC min bpp value connector specific. (Ankit)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-12-imre.deak@intel.com
Export the function that can be used by a follow-up change to query the
minimum compressed link bpp supported by the HW.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-11-imre.deak@intel.com
Factor out helpers that can be used in a follow-up change to query the
minimum and maximum pipe bpp supported by the HW.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-10-imre.deak@intel.com
Add support for a fractional compressed link bpp on an MST link. Leave
the actual enabling of fractional bpps to a follow-up change.
While at it add an assert before the bpp loop, that the min and max bpps
are aligned to the bpp step. This should hold regardless of the non-DSC/DSC
or MST/UHBR-SST modes.
This keeps the mode validation and DSC->DPT BW specific maximum link
bpps as rounded-down integer values still, changing those to a
fractional value is left for later, add here TODO comments for them.
v2:
- Align the min/max bpp value to the bpp step.
- Assert that the min/max bpp values are aligned to the bpp step.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-9-imre.deak@intel.com
The maximum link bpp - determined by the link BW for instance - can be
fractional, handle this properly during computing the link bpp on SST.
This keeps the pipe joiner specific maximum link bpp as a rounded-down
integer value still, changing that to a fractional value is left for
later.
v2: Align the min/max bpp value to the bpp step.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-8-imre.deak@intel.com
Adjusting the compressed bpp range min/max limits in
intel_dp_dsc_nearest_valid_bpp() is unnecessary:
- The source/sink min/max values are enforced already by the
link_config_limits::min_bpp_x16/max_bpp_x16 values computed early in
intel_dp_compute_config_link_bpp_limits().
- The fixed set of valid bpps are enforced already - for all bpps in the
min .. max range by intel_dp_dsc_valid_compressed_bpp() called from
intel_dp_mtp_tu_compute_config().
The only thing needed is limiting max compressed bpp below the
uncompressed pipe bpp, do that one thing only instead of calling
intel_dp_dsc_nearest_valid_bpp().
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-7-imre.deak@intel.com
Check the BW requirement of a selected compressed bpp against the total
MST link BW early. This didn't cause a problem, since all the BW limits
within the MST topology are checked during the later MST topology BW
check. However it doesn't make sense to defer the total link BW check,
since for resolving a BW limit issue due to this later also (a) requires
selecting a pipe to reduce its bpp, ending up reducing the bpp for
another pipe, which is not ideal (b) requires recomputing the state for
all CRTC/stream's in the topology which may slow down the commit
considerably (especially when using fractional bpps).
Based on the above, check a stream bpp's BW requirement against the MST
link's total BW early.
Ideally drm_dp_atomic_find_time_slots() should check internally the
corresponding PBN/TU slot BW against the total link BW, returning an
error if the check fails, however that change would also affect other
drivers, so leaving this for a follow-up.
v2: Rephrase description of pipe selection/bpp reduction in commit
message. (Ankit)
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-6-imre.deak@intel.com
A follow up change will check a selected bpp's BW requirement in
intel_dp_mtp_tu_compute_config(), however that requires the total link
slot count to be up-to-date. The latter in turn depends on the channel
encoding and hence the link rate used, so it can be set after the
link rate used is selected.
This also allows simplifying mst_stream_update_slots(), do that as well,
moving the function definition before its use.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-5-imre.deak@intel.com
Atm TGL supports only a fixed set of valid DSC compressed bpps
(6,8,10,12,15), but this is not taken into account while looking for a
bpp in the minimum..maximum compressed bpp range.
This happened to work only by chance since atm from the above min..max
range it's always the maximum bpp that is selected, which is one of the
above valid bpps (see mst_stream_dsc_compute_link_config() ->
intel_dp_dsc_nearest_valid_bpp()). Before selecting a bpp however, the
bpp's BW requirement should be checked wrt. to the MST total link BW;
after doing that - in a follow-up change - the validity of any bpp in
the min..max range must be ensured before the bpp is selected, do that
here.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-4-imre.deak@intel.com
A follow-up change wants to skip invalid bpps in the bpp select loop of
a stream state computation. To allow for that, using the usual
'continue' statement in the loop, change the way the single-bpp range is
handled.
v2: Fix typo in commit message. (Ankit)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-3-imre.deak@intel.com
Atm, on an MST link in DSC mode
intel_dp_compute_config_link_bpp_limits() calculates the maximum link
bpp limit using the MST root connector's DSC capabilities. That's not
correct in general: the decompression could be performed by a branch
device downstream of the root branch device or the sink itself.
Fix the above by passing to intel_dp_compute_config_link_bpp_limits()
the actual connector being modeset, containing the correct DSC
capabilities.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 1c5b72daff ("drm/i915/dp: Set the DSC link limits in intel_dp_compute_config_link_bpp_limits")
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-2-imre.deak@intel.com
There is a chance that obj->dma_buf would be NULL by the time
virtgpu_dma_buf_free_obj() is called. This can happen for imported
prime objects, when drm_gem_object_exported_dma_buf_free() gets
called on them before drm_gem_object_free(). This is because
drm_gem_object_exported_dma_buf_free() explicitly sets
obj->dma_buf to NULL.
Therefore, fix this issue by storing the dma_buf pointer in the
virtio_gpu_object instance and using it in virtgpu_dma_buf_free_obj.
This stored pointer is guaranteed to be valid until the object is
freed as we took a reference on it in virtgpu_gem_prime_import().
Fixes: 415cb45895 ("drm/virtio: Use dma_buf from GEM object instance")
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20250501232419.180337-1-vivek.kasireddy@intel.com
Due to changes in allocator, the size of the allocation for
contiguous region is not rounded up to a power-of-two and
instead allocated as is. Thus, change the part of test that
expected the allocation to fail.
Signed-off-by: Mikolaj Wasiak <mikolaj.wasiak@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/fptevdfbclvg2lbfuys5ibffbl2baouywkutnr7vdsy5tzcqfk@mpflwlh6jxfd
We start to have support many Sitronix displays in the tiny directory,
and we expect more to come.
Move them to their own subdirectory.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250512-sitronix-v3-1-bbf6cc413698@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Right or wrong, HAS_GMCH() has become a display only thing. The last
three users outside of display are in irq code. Reorder the if ladders
to stop using HAS_GMCH().
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://lore.kernel.org/r/20250502120725.439800-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since commit 559358282e ("drm/fb-helper: Don't use the preferred depth
for the BPP default"), RGB565 displays such as the CFAF240320X no longer
render correctly: colors are distorted and the content is shown twice
horizontally.
This regression is due to the fbdev emulation layer defaulting to 32 bits
per pixel, whereas the display expects 16 bpp (RGB565). As a result, the
framebuffer data is incorrectly interpreted by the panel.
Fix the issue by calling drm_client_setup_with_fourcc() with a format
explicitly selected based on the display's bits-per-pixel value. For 16
bpp, use DRM_FORMAT_RGB565; for other values, fall back to the previous
behavior. This ensures that the allocated framebuffer format matches the
hardware expectations, avoiding color and layout corruption.
Tested on a CFAF240320X display with an RGB565 configuration, confirming
correct colors and layout after applying this patch.
Cc: stable@vger.kernel.org
Fixes: 559358282e ("drm/fb-helper: Don't use the preferred depth for the BPP default")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250417103458.2496790-1-festevam@gmail.com
The driver handles the case where gpu fw is not in the initrd. OTOH it
doesn't always handle the case where _some_ fw is in the initrd, but
others are not. In particular the zap fw tends to be signed with an OEM
specific key, so the paths/names differ across devices with the same
SoC/GPU, so we cannot sanely list them with MODULE_FIRMWARE().
So MODULE_FIRMWARE() just ends up causing problems without actually
solving anything. Remove them!
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/652195/
This feature is supposed to be enabled with UBWC v4 or later.
Implementations of this SKU feature an effective UBWC version of 3, so
disable it, in line with the BSP kernel.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Fixes: 192f4ee3e4 ("drm/msm/a6xx: Add support for Adreno 7c Gen 3 gpu")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/651759/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Toolchain and infrastructure:
- Make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88.0.
- Clean Rust (and Clippy) lints for the upcoming Rust 1.87.0 and Rust
1.88.0 releases.
- Clean objtool warning for the upcoming Rust 1.87.0 release by adding
one more noreturn function.
-----BEGIN PGP SIGNATURE-----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=lyOI
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88.0
- Clean Rust (and Clippy) lints for the upcoming Rust 1.87.0 and 1.88.0
releases
- Clean objtool warning for the upcoming Rust 1.87.0 release by adding
one more noreturn function
* tag 'rust-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
x86/Kconfig: make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88
rust: clean Rust 1.88.0's `clippy::uninlined_format_args` lint
rust: clean Rust 1.88.0's warning about `clippy::disallowed_macros` configuration
rust: clean Rust 1.88.0's `unnecessary_transmutes` lint
rust: allow Rust 1.87.0's `clippy::ptr_eq` lint
objtool/rust: add one more `noreturn` Rust function for Rust 1.87.0
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmgcsdUACgkQ+mJfZA7r
E8rYqAf/citknZ0aTAOw7+O8581v6/27BsmRYO8T2JvhHWr3RIOeowgyEQ9M3m6y
jBM5qIsGH0JOrDMVDjvuVlfm+JAPRxVABo3GXTpUIu94xszwco+5iQNnHBui0NrP
AnAauh/MZC6YKmTzNVBHW35N+JQJ9clmK6Rf5Bzb8pVP1bPRwRFSpgefHBeimRRY
qeQlqEVfvst5gkQiTe2b/5ydErPB7WfBY4WHGrgykBPt0+3t7Zln3Dqbdm9vB7+p
zEHXQNvX75KGFimUgCf7mU2Hoov0LI1/cazeG1dbv6gczXOUySwIKRIuqKNJ6XsG
PSV0X8Hc1ppL4Sp1Oe/WAdwE2k/xxw==
=rvsI
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-05-08' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com