The file uses the panel_bridge APIs from drm_bridge.h, but no drm_panel
APIs from drm_panel.h.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206-drm-cleanups-v1-4-93df60faa756@bootlin.com
The starry-2082109qfh040022-50e is a 10.95" TFT panel. The MIPI controller
on this panel is the same as the other panels here, so add this panel to
this driver.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250208105326.3850358-4-yelangyan@huaqin.corp-partner.google.com
The kingdisplay-kd110n11-51ie is a 10.95" TFT panel. The MIPI controller
on this panel is the same as the other panels here, so add this panel
to this driver.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250208105326.3850358-3-yelangyan@huaqin.corp-partner.google.com
bos_lock is to protect list of bos used by client, it is
not required to protect bo->client so bring it outside of
bos_lock.
Fixes: b27970f3e1 ("drm/xe: Add tracking support for bos per client")
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250205051042.1991192-1-tejas.upadhyay@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
TTM always uses pin_count and ttm_resource_is_swapped() together to
determine whether a BO is unevictable.
Now use ttm_resource_unevictable() to replace them.
Signed-off-by: Zhaoyu Liu <liuzhaoyu.zackary@bytedance.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250126093256.GA688734@bytedance
Signed-off-by: Christian König <christian.koenig@amd.com>
VRAM manager is related directly to struct xe_vram_region so it
should be inside this structure.
Let's move the VRAM to struct xe_vram_region.
v2:
- remove xe_vram_region pointer from xe_ttm_vram_mgr
- stop use dynamic alloaction for xe_ttm_vram_mgr in xe_vram_region
- rename struct xe_ttm_vram_mgr vram_mgr to ttm
v3:
- fix "'ttm' not described in 'xe_vram_region'"
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210081511.906452-3-piotr.piorkowski@intel.com
The xe_mem_region structure has so far been used only in the context
of VRAM regions. Also, the description of its fields clearly indicates
that it was designed for VRAM regions. This struct is strictly related
only to VRAM.
So let's be clear on this point and rename it to xe_vram_region.
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210081511.906452-2-piotr.piorkowski@intel.com
With the debugfs implementation moved next to the implementation, we no
longer need to expose some of the functions. Make them static.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207105838.179805-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
So far, the main condition for using LMTT has been to check that
the device is a discrete gfx.
Let's add a dedicated function to check if the device supports LMTT
as not all future discrete GPU platforms will require LMTT.
v2:
- use xe_has_device_lmtt only when necessary - leave IS_DGFX for other
things related to LMEM provisioning
v3:
- remove IS_SRIOV_PF condition from xe_device_has_lmtt (Michal
Wajdeczko)
- keep IS_SRIOV_PF asserts in LMTT-related code (Michal Wajdeczko)
v4:
- update commit description
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207113111.853821-2-piotr.piorkowski@intel.com
Virtio gpu supports the drm_panic module, which displays a message to
the screen when a kernel panic occurs. It is supported where it has
vmapped shmem BO.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206104300.416014-1-ryasuoka@redhat.com
Without the DP helper code, the newly added displayport support
causes a link failure:
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.o: in function `hibmc_dp_aux_init':
dp_aux.c:(.text+0x37e): undefined reference to `drm_dp_aux_init'
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_set_pattern':
dp_link.c:(.text+0xae): undefined reference to `drm_dp_dpcd_write'
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_get_adjust_train':
dp_link.c:(.text+0x121): undefined reference to `drm_dp_get_adjust_request_voltage'
x86_64-linux-ld: dp_link.c:(.text+0x12e): undefined reference to `drm_dp_get_adjust_request_pre_emphasis'
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_training':
dp_link.c:(.text+0x2b0): undefined reference to `drm_dp_dpcd_write'
x86_64-linux-ld: dp_link.c:(.text+0x2e3): undefined reference to `drm_dp_dpcd_write'
Add both DRM_DISPLAY_DP_HELPER and DRM_DISPLAY_HELPER, which is
in turn required by the former.
Fixes: 0ab6ea261c ("drm/hisilicon/hibmc: add dp module in hibmc")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127071059.617567-1-arnd@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The csot-pna957qt1-1 is a 10.95" TFT panel. The MIPI controller on this
panel is the same as the other panels here, so add this panel to this
driver.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206131300.1295111-4-yelangyan@huaqin.corp-partner.google.com
We should now have sufficient changes in the driver to run it on
PTL platforms in the SR-IOV Physical Function (PF) mode, that would
allow us to enable SR-IOV Virtual Functions (VFs), and successfully
probe our driver in the VF mode on enabled VF devices.
To unblock SR-IOV PF mode you need to load xe with modparam:
xe.max_vfs=7
Then to enable VFs it is sufficient to use:
$ echo 7 > /sys/bus/pci/devices/0000:00:02.0/sriov_numvfs
Note that in default auto-provisioning all VFs are allocated with
some amount of shared resources (like unlimited GPU execution and
preemption times, fair GGTT space, fair GuC context IDs range, ...)
However with CONFIG_DEBUG_FS enabled it is possible to tweak most
of the SR-IOV configuration parameters using attributes like:
/sys/kernel/debug/dri/0000:00:02.0/gt0/
├── pf
│ ├── contexts_spare
│ ├── doorbells_spare
│ ├── exec_quantum_ms
│ ├── ggtt_spare
│ ├── preempt_timeout_us
│ ├── sched_priority
│ └── ...
├── vf1
│ ├── contexts_quota
│ ├── doorbells_quota
│ ├── exec_quantum_ms
│ ├── ggtt_quota
│ ├── preempt_timeout_us
│ ├── sched_priority
│ └── ...
├── vf2
│ └── ...
:
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jakub Kolakowski <jakub1.kolakowski@intel.com>
Tested-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Reviewed-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206214545.940-1-michal.wajdeczko@intel.com
The current encoding, is done by converting 13bits of input into 4
decimal digits, that are then encoded efficiently using the numeric
encoding of the QR code specification.
The Fido v2.2 specification [1] uses a similar approach for its
QR-initiated authentication. The only difference is that it converts
7 bytes (56bits) of input into 17 decimal digits. The benefit is that
the algorithm doesn't require to split input bytes into 13bits chunk,
and the ratio is a bit better.
This improvement was proposed by Jó Ágila Bitsch in [2].
drm_panic is still young, and the QR code feature is not widely used,
so it's still time to switch to a common algorithm, shared with a
widely used standard.
I also changed the name of the url parameter, from zl= to z=, so the
website can keep backward compatibility if needed.
[1] https://fidoalliance.org/specs/fido-v2.2-rd-20230321/fido-client-to-authenticator-protocol-v2.2-rd-20230321.html#hybrid-qr-initiated
[2] https://github.com/kdj0c/panic_report/issues/2
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250128165254.893204-1-jfalempe@redhat.com
'priorities_info' is uninitialized, and the uninitialized value is copied
to user object when calling PANTHOR_UOBJ_SET(). Using memset to initialize
'priorities_info' to avoid this garbage value problem.
Fixes: f70000ef23 ("drm/panthor: Add DEV_QUERY_GROUP_PRIORITIES_INFO dev query")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250119025828.1168419-1-suhui@nfschina.com
This will display the sizes of kenrel BO's bound to an open file, which are
otherwise not exposed to UM through a handle.
The sizes recorded are as follows:
- Per group: suspend buffer, protm-suspend buffer, syncobjcs
- Per queue: ringbuffer, profiling slots, firmware interface
- For all heaps in all heap pools across all VM's bound to an open file,
record size of all heap chuks, and for each pool the gpu_context BO too.
This does not record the size of FW regions, as these aren't bound to a
specific open file and remain active through the whole life of the driver.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130172851.941597-4-adrian.larumbe@collabora.com
This is motivated by the desire of some drivers (eg. Panthor) to print the
size of internal memory regions with a prefix that reflects the driver
name, as suggested in the previous documentation commit.
That means adding a new argument to print_size and making it available for
DRM users.
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130172851.941597-3-adrian.larumbe@collabora.com
Disable the minimum HBlank time only on LNL+, where this functionality
and corresponding register exists.
Bspec: 74379
Fixes: a5ebe00c2a ("drm/i915/dp: Guarantee a minimum HBlank time")
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206164624.3185280-1-imre.deak@intel.com
Add new entries in stats for vma page faults. If CONFIG_DEBUG_FS is
enabled, the count and number of bytes can be viewed per GT in the
stat debugfs file. This helps when testing, to confirm page faults
have been triggered as expected. It also helps when looking at the
performance impact of page faults. Data is simply collected when
entering the page fault handler so there is no indication whether
it completed successfully, with or without retries, etc.
Example output:
cat /sys/kernel/debug/dri/0/gt0/stats
tlb_inval_count: 129
vma_pagefault_count: 12
vma_pagefault_bytes: 98304
v2: Rebase
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206134551.1321265-1-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
handling, AST DP timeout fix when enabling the output, locking fix for
zynqmp DP support, tiled format handling in drm/client, and refcounting
fix for bochs
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZ6R9jwAKCRAnX84Zoj2+
drO1AYCRRlokrTPy9jqL1EFfpvI7aqq02jA/87CcaDd19DS2phZyx6UEAIMFaXdp
E+fNafgBgKg5Wi64Ht7gyjJaI+FZv9qSXBo/9YMAk98xGstdT9HJ23nVHSeQ17XV
HKo7LM3Crw==
=WODG
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2025-02-06' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A couple of fixes for ivpu to error handling, komeda for format
handling, AST DP timeout fix when enabling the output, locking fix for
zynqmp DP support, tiled format handling in drm/client, and refcounting
fix for bochs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206-encouraging-judicious-quoll-adc1dc@houat
Since commit a4d1c5d0b9 ("drm/xe/pf: Move VFs reprovisioning
to worker") and commit 78d5d1e20d ("drm/xe/relay: Don't use
GFP_KERNEL for new transactions") we should have no more lockdep
dependencies on the reclaim path when running in the SRIOV mode
so we believe that we can now mark SRIOV driver as reclaim safe.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Tested-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Reviewed-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250205120150.896-1-michal.wajdeczko@intel.com
A simple lazy buggy copy and paste of the PVC comment has brought
the attention to the incorrect masks of the PVC register for RPa
and RPe. So, let's fix them all.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109195219.658557-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Modify backlight setup function for VESA interface to take into
account the nits based luminance.
--v2
-Prefer using luminance over nits [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Ben Kao <ben.kao@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206063253.2827017-8-suraj.kandpal@intel.com
Create a function that fills in the value for
PANEL_TARGET_LUMINANCE_VALUE which helps in changing the luminance in
nits using VESA interface.
--v2
-Prefer using luminance over nits [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Ben Kao <ben.kao@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206063253.2827017-7-suraj.kandpal@intel.com
Modify vesa_get_brightness function to take into account
luminance_control_support and based on that read the appropriate
register and return the value.
--v2
-Changes since we now use luminance instead of nits
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Ben Kao <ben.kao@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206063253.2827017-6-suraj.kandpal@intel.com
Check if we are capable of controlling brightness via luminance
which is dependent on PANEL_LUMINANCE_CONTROL_CAPABLE bit being set
on EDP_GENERAL_CAPABILITY_2 register.
--v2
-Prefer using luminance rather than nits [Jani]
-Fix commit message
--v3
-Fix the bit name used in commit message [Arun]
-Use correct edp_dpcd[] to check the capability [Arun]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Ben Kao <ben.kao@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206063253.2827017-5-suraj.kandpal@intel.com
eDP is supposed to use VESA interface when using revision 1.5 and above,
use Intel interface for backlight control otherwise. Add check to
use correct interface.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Ben Kao <ben.kao@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206063253.2827017-4-suraj.kandpal@intel.com
The MST intel_connector::encoder pointer is NULL if the connector hasn't
been enabled before, so it can't be used to retrieve the display
pointer. Use instead the crtc_state and drop the unused connector
parameter.
v2: Use the crtc_state and drop the unused connector parameter.
Fixes: a5ebe00c2a ("drm/i915/dp: Guarantee a minimum HBlank time")
Reported-and-tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Closes: https://lore.kernel.org/all/16754ee4cd21d99c1e81c5953134b496dd07630f.camel@intel.com
Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com> #v1
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206001726.3021787-1-imre.deak@intel.com
Grab the GTT view for the fbdev fb pinning from
fb->normal_view.gtt instead of having and extra one on
the stack. Seems safer in case we ever put any new
information into normal GTT views.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122151755.6928-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fix a typo where V compare incorrectly compares av[] with av[] itself,
which can result in HDCP failure.
The loop of V compare is expected to iterate for 5 times
which compare V array form av[0][] to av[4][].
It should check loop counter reach the last statement "i == 5"
before return true
Fixes: 0989c02c7a ("drm/bridge: it6505: fix HDCP CTS compare V matching")
Signed-off-by: Hermes Wu <Hermes.wu@ite.com.tw>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121-fix-hdcp-v-comp-v4-1-185f45c728dc@ite.com.tw
Bspec lists different VT-d guard numbers (the number of dummy
padding PTEs) for different platforms and plane types. Use those
instead of just assuming the max glk+ number for everything.
This could avoid a bit of overhead on older platforms due to
reduced padding, and it makes it easier to cross check with the
spec.
Note that VLV/CHV do not document this w/a at all, so not sure
if it's actually needed or not. Nor do we actually know how much
padding is required if it is needed. For now use the same 128
PTEs that we use for snb-bdw primary planes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122151755.6928-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently i915_gem_object_pin_to_display_plane() uses
i915_gem_object_get_tile_row_size() to calculate the tile row
size for the VT-d guard w/a. That's not really proper since
i915_gem_object_get_tile_row_size() only works for fenced BOs,
nor does it take rotation into account.
Remedy the situation by calculating the VT-d guard size in the
display code where we have more information readily available.
Although the default guard size (168 PTEs now) should cover
the more typical fb size use cases anyway, and only very large
Y/Yf-tiled framebuffers might have tile row size that exceeds it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122151755.6928-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Depending on the platform and/or plane type we can get away
with a bit less alignment in the VT-d w/a. Reduce the numbers
accordingly.
Note that it's not actually clear in VLV/CHV need this w/a,
and if they do we don't actually know what kind of alignment
is sufficient. Leave the 256k alignment in place for now, but
toss in a FIXME.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122151755.6928-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently we don't account for the VT-d alignment w/a in
plane->min_alignment() which means that panning inside a larger
framebuffer can still cause the plane SURF to be misaligned.
Fix the issue by moving the VT-d alignment w/a into
plane->min_alignment() itself (for the affected platforms).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122151755.6928-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The find_preferred_mode() functions takes the mode_config mutex, but due
to the order most tests have, is called with the crtc_ww_class_mutex
taken. This raises a warning for a circular dependency when running the
tests with lockdep.
Reorder the tests to call find_preferred_mode before the acquire context
has been created to avoid the issue.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-4-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The tests all deviate slightly in how they assign their local pointers
to DRM entities. This makes refactoring pretty difficult, so let's just
move the assignment as soon as the entities are allocated.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-3-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>