PXP prerequisites (SW proxy and HuC auth via GSC) are completed
asynchronously from driver load, which means that userspace can start
submitting before we're ready to start a PXP session. Therefore, we need
a query that userspace can use to check not only if PXP is supported but
also to wait until the prerequisites are done.
v2: Improve doc, do not report TYPE_NONE as supported (José)
v3: Better comments, remove unneeded copy_from_user (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-10-daniele.ceraolospurio@intel.com
Userspace is required to mark a queue as using PXP to guarantee that the
PXP instructions will work. In addition to managing the PXP sessions,
when a PXP queue is created the driver will set the relevant bits in
its context control register.
On submission of a valid PXP queue, the driver will validate all
encrypted objects mapped to the VM to ensured they were encrypted with
the current key.
v2: Remove pxp_types include outside of PXP code (Jani), better comments
and code cleanup (John)
v3: split the internal PXP management to a separate patch for ease of
review. re-order ioctl checks to always return -EINVAL if parameters are
invalid, rebase on msix changes.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-9-daniele.ceraolospurio@intel.com
We expect every queue that uses PXP to be marked as doing so, to allow
the driver to correctly manage the encryption status. The API for doing
this from userspace is coming in the next patch, while this patch
implement the management side of things. When a PXP queue is created,
the driver will do the following:
- Start the default PXP session if it is not already running;
- assign an rpm ref to the queue to keep for its lifetime (this is
required because PXP HWDRM sessions are killed by the HW suspend flow).
Since PXP start and termination can race each other, this patch also
introduces locking and a state machine to keep track of the pending
operations. Note that since we'll need to take the lock from the
suspend/resume paths as well, we can't do submissions while holding it,
which means we need a slightly more complicated state machine to keep
track of intermediate steps.
v4: new patch in the series, split from the following interface patch to
keep review manageable. Lock and status rework to not do submissions
under lock.
v5: Improve comments and error logs (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-8-daniele.ceraolospurio@intel.com
A session is initialized (i.e. started) by sending a message to the GSC.
The initialization will be triggered when a user opts-in to using PXP;
the interface for that is coming in a follow-up patch in the series.
v2: clean up error messages, use new ARB define (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-7-daniele.ceraolospurio@intel.com
When something happen to the session, the HW generates a termination
interrupt. In reply to this, the driver is required to submit an inline
session termination via the VCS, trigger the global termination and
notify the GSC FW that the session is now invalid.
v2: rename ARB define to make it cleaner to move it to uapi (John)
v3: fix parameter name in documentation
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-6-daniele.ceraolospurio@intel.com
After a session is terminated, we need to inform the GSC so that it can
clean up its side of the allocation. This is done by sending an
invalidation command with the session ID.
The invalidation will be triggered in response to a termination,
interrupt, whose handling is coming in the next patch in the series.
v2: Better comment and error messages (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-5-daniele.ceraolospurio@intel.com
The key termination is done with a specific submission to the VCS
engine. This flow will be triggered in response to a termination
interrupt, whose handling is coming in a follow-up patch in the series.
v2: clean up defines and command emission code. (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-4-daniele.ceraolospurio@intel.com
PXP requires submissions to the HW for the following operations
1) Key invalidation, done via the VCS engine
2) Communication with the GSC FW for session management, done via the
GSCCS.
Key invalidation submissions are serialized (only 1 termination can be
serviced at a given time) and done via GGTT, so we can allocate a simple
BO and a kernel queue for it.
Submissions for session management are tied to a PXP client (identified
by a unique host_session_id); from the GSC POV this is a user-accessible
construct, so all related submission must be done via PPGTT. The driver
does not currently support PPGTT submission from within the kernel, so
to add this support, the following changes have been included:
- a new type of kernel-owned VM (marked as GSC), required to ensure we
don't use fault mode on the engine and to mark the different lock
usage with lockdep.
- a new function to map a BO into a VM from within the kernel.
v2: improve comments and function name, remove unneeded include (John)
v3: fix variable/function names in documentation
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-3-daniele.ceraolospurio@intel.com
As the first step towards adding PXP support, hook in the PXP init
function, allocate the PXP structure and initialize the KCR register to
allow PXP HWDRM sessions.
v2: remove unneeded includes, free PXP memory on error (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-2-daniele.ceraolospurio@intel.com
Commit 70fb86a85d ("drm/xe: Revert some changes that break a mesa
debug tool") partially reverted some changes to workaround breakage
caused to mesa tools. However, in doing so it also broke fetching the
GuC log via debugfs since xe_print_blob_ascii85() simply bails out.
The fix is to avoid the extra newlines: the devcoredump interface is
line-oriented and adding random newlines in the middle breaks it. If a
tool is able to parse it by looking at the data and checking for chars
that are out of the ascii85 space, it can still do so. A format change
that breaks the line-oriented output on devcoredump however needs better
coordination with existing tools.
v2: Add suffix description comment
v3: Reword explanation of xe_print_blob_ascii85() calling drm_puts()
in a loop
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: 70fb86a85d ("drm/xe: Revert some changes that break a mesa debug tool")
Fixes: ec1455ce7e ("drm/xe/devcoredump: Add ASCII85 dump helper function")
Link: https://patchwork.freedesktop.org/patch/msgid/20250123202307.95103-2-jose.souza@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 2c95bbf500)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Having the exec queue snapshot inside a "GuC CT" section was always
wrong. Commit c28fd6c358 ("drm/xe/devcoredump: Improve section
headings and add tile info") tried to fix that bug, but with that also
broke the mesa tool that parses the devcoredump, hence it was reverted
in commit a53da2fb25 ("drm/xe: Revert some changes that break a mesa
debug tool").
With the mesa tool also fixed, this can propagate as a fix on both
kernel and userspace side to avoid unnecessary headache for a debug
feature.
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: a53da2fb25 ("drm/xe: Revert some changes that break a mesa debug tool")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123051112.1938193-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit a37934ea75)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We rely on stream->pollin to decide whether or not to block during
poll/read calls. However, currently there are blocking read code paths
which don't even set stream->pollin. The best place to consistently set
stream->pollin for all code paths is therefore to set it in
xe_oa_buffer_check_unlocked.
Fixes: e936f885f1 ("drm/xe/oa/uapi: Expose OA stream fd")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115222029.3002103-1-ashutosh.dixit@intel.com
(cherry picked from commit d3fedff828)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The migration support only needs to be initialized once, but it
was incorrectly called from the xe_gt_sriov_pf_init_hw(), which
is part of the reset flow and may be called multiple times.
Fixes: d86e3737c7 ("drm/xe/pf: Add functions to save and restore VF GuC state")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120232443.544-1-michal.wajdeczko@intel.com
(cherry picked from commit 9ebb5846e1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
UMD's have interest in setting unused bits of the oa_ctrl register "out of
band" for certain experiments. To facilitate this, don't clobber previous
oa_ctrl unused bits, i.e. rmw the values rather than simply write them.
Fixes: e936f885f1 ("drm/xe/oa/uapi: Expose OA stream fd")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117032155.3048063-1-ashutosh.dixit@intel.com
(cherry picked from commit cfa9d40db8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[WHY]
When the system powers up eDP with external monitors in seamless boot
sequence, stutter get enabled before TTU and HUBP registers being
programmed, which resulting in underflow.
[HOW]
Enable TTU in hubp_init.
Change the sequence that do not perpare_bandwidth and optimize_bandwidth
while having seamless boot streams.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
hpo_stream_to_link_encoder_mapping has size MAX_HPO_DP2_ENCODERS(=4),
but location can have size up to 6. As a result, it is necessary to
check location against MAX_HPO_DP2_ENCODERS.
Similiarly, disp_cfg_stream_location can be used as an array index which
should be 0..5, so the ASSERT's conditions should be less without equal.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3904
Reviewed-by: Austin Zheng <Austin.Zheng@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vulkan can't support DCC and Z/S compression on GFX12 without
WRITE_COMPRESS_DISABLE in this commit or a completely different DCC
interface.
AMDGPU_TILING_GFX12_SCANOUT is added because it's already used by userspace.
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With just the one platform independent loop left in
do_dsc_compute_compressed_bpp(), we don't really need the extra function
that is simply becoming increasingly hard to even figure out a decent
name for. Just merge the whole thing to
dsc_compute_compressed_bpp(). Good riddance to the short lived
do_dsc_compute_compressed_bpp().
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/91ae42cbdffe4938a665667955c577f887b92b9d.1738327620.git.jani.nikula@intel.com
Now that {icl,xelpd}_dsc_compute_link_config() take .4 fixed point as
parameter, move the common max DSC BPP reduction one level higher. Use
intel_dp_dsc_bpp_step() to compute the step, and pass on to both
platform specific functions. (Though it's unused for now in
icl_dsc_compute_link_config()).
We can drop the pipe_bpp and connector parameters.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/62fa7f18ea49dce24c5d0ee7b2f0cbde9e2b609c.1738327620.git.jani.nikula@intel.com
Try to keep the variables in the same domain a bit longer to reduce
juggling between integers and .4 fixed point. Change parameter order to
min, max while at it.
For now, keep the juggling in dsc_compute_compressed_bpp() ensure
min/max will always have 0 fractional part. To be fixed later.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e72f153fd28755e41ee8c5a7b9e6de257c3b27ac.1738327620.git.jani.nikula@intel.com
Commit 1c56e9a398 ("drm/i915/dp: Get optimal link config to have best
compressed bpp") tries to find the best compressed bpp for the
link. However, it iterates from max to min bpp on display 13+, and from
min to max on other platforms. This presumably leads to minimum
compressed bpp always being chosen on display 11-12.
Iterate from high to low on all platforms to actually use the best
possible compressed bpp.
Fixes: 1c56e9a398 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bba67923cbcd13a59d26ef5fa4bb042b13c8a9b.1738327620.git.jani.nikula@intel.com
The scale() functions detects invalid parameters, but continues
its calculations anyway. This causes bad results if negative values
are used for unsigned operations. Worst case, a division by 0 error
will be seen if source_min == source_max.
On top of that, after v6.13, the sequence of WARN_ON() followed by clamp()
may result in a build error with gcc 13.x.
drivers/gpu/drm/i915/display/intel_backlight.c: In function 'scale':
include/linux/compiler_types.h:542:45: error:
call to '__compiletime_assert_415' declared with attribute error:
clamp() low limit source_min greater than high limit source_max
This happens if the compiler decides to rearrange the code as follows.
if (source_min > source_max) {
WARN(..);
/* Do the clamp() knowing that source_min > source_max */
source_val = clamp(source_val, source_min, source_max);
} else {
/* Do the clamp knowing that source_min <= source_max */
source_val = clamp(source_val, source_min, source_max);
}
Fix the problem by evaluating the return values from WARN_ON and returning
immediately after a warning. While at it, fix divide by zero error seen
if source_min == source_max.
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: David Laight <david.laight.linux@gmail.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121145203.2851237-1-linux@roeck-us.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 6f71507415)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently, intel_dp_dsc_max_src_input_bpc can return 0 for platforms not
supporting DSC, which could theoretically cause issues in clamp()
due to a low limit being greater than the high limit.
Instead, return the minimum bpc supported by the source to prevent
such issues.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtNfM399_=_ff81zeRJv=0+z7oFJfPGmJgTp6yrJmU+1w@mail.gmail.com/
Fixes: 160672b86b ("drm/i915/dp: Use clamp for pipe_bpp limits with DSC")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131041342.3086716-1-ankit.k.nautiyal@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit a67221b5eb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently we support Adaptive sync operation mode with dynamic frame
rate, but instead the operation mode with fixed rate is set.
This was initially set correctly in the earlier version of changes but
later got changed, while defining a macro for the same.
Fixes: a5bd5991cb ("drm/i915/display: Compute AS SDP parameters")
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130051609.1796524-4-mitulkumar.ajitkumar.golani@intel.com
(cherry picked from commit c580686254)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
After the context is unpinned the backing memory can also be unpinned,
so any accesses via the lrc_reg_state pointer can end up in unmapped
memory. To avoid that, make sure to only access that memory if the
context is pinned when printing its info.
v2: fix newline alignment
Fixes: 28ff6520a3 ("drm/i915/guc: Update GuC debugfs to support new GuC")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115001334.3875347-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 5bea40687c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
I'm seeing underruns with these 64bpp YUV formats on TGL.
The weird details:
- only happens on pipe B/C/D SDR planes, pipe A SDR planes
seem fine, as do all HDR planes
- somehow CDCLK related, higher CDCLK allows for bigger plane
with these formats without underruns. With 300MHz CDCLK I
can only go up to 1200 pixels wide or so, with 650MHz even
a 3840 pixel wide plane was OK
- ICL and ADL so far appear unaffected
So not really sure what's the deal with this, but bspec does
state "64-bit formats supported only on the HDR planes" so
let's just drop these formats from the SDR planes. We already
disallow 64bpp RGB formats.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218173650.19782-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 35e1aacfe5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When converting to folios the cleanup path of shmem_get_pages() was
missed. When a DMA remap fails and the max segment size is greater than
PAGE_SIZE it will attempt to retry the remap with a PAGE_SIZEd segment
size. The cleanup code isn't properly using the folio apis and as a
result isn't handling compound pages correctly.
v2 -> v3:
(Ville) Just use shmem_sg_free_table() as-is in the failure path of
shmem_get_pages(). shmem_sg_free_table() will clear mapping unevictable
but it will be reset when it retries in shmem_sg_alloc_table().
v1 -> v2:
(Ville) Fixed locations where we were not clearing mapping unevictable.
Cc: stable@vger.kernel.org
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13487
Link: https://lore.kernel.org/lkml/20250116135636.410164-1-bgeffon@google.com/
Fixes: 0b62af28f2 ("i915: convert shmem_sg_free_table() to use a folio_batch")
Signed-off-by: Brian Geffon <bgeffon@google.com>
Suggested-by: Tomasz Figa <tfiga@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127204332.336665-1-bgeffon@google.com
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 9e304a1863)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When running igt@gem_exec_balancer@individual for multiple iterations,
it is seen that the delta busyness returned by PMU is 0. The issue stems
from a combination of 2 implementation specific details:
1) gt_park is throttling __update_guc_busyness_stats() so that it does
not hog PCI bandwidth for some use cases. (Ref: 59bcdb564b)
2) busyness implementation always returns monotonically increasing
counters. (Ref: cf907f6d29)
If an application queried an engine while it was active,
engine->stats.guc.running is set to true. Following that, if all PM
wakeref's are released, then gt is parked. At this time the throttling
of __update_guc_busyness_stats() may result in a missed update to the
running state of the engine (due to (1) above). This means subsequent
calls to guc_engine_busyness() will think that the engine is still
running and they will keep updating the cached counter (stats->total).
This results in an inflated cached counter.
Later when the application runs a workload and queries for busyness, we
return the cached value since it is larger than the actual value (due to
(2) above)
All subsequent queries will return the same large (inflated) value, so
the application sees a delta busyness of zero.
Fix the issue by resetting the running state of engines each time
intel_guc_busyness_park() is called.
v2: (Rodrigo)
- Use the correct tag in commit message
- Drop the redundant wakeref check in guc_engine_busyness() and update
commit message
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13366
Fixes: cf907f6d29 ("i915/guc: Ensure busyness counter increases motonically")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123193839.2394694-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 431b742e2b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Use intel_encoder_is_hdmi function which was recently introduced to
see if encoder is HDMI or not.
--v2
-Add Fixes tag [Jani]
Fixes: 6a3691ca47 ("drm/i915/hdcp: Disable HDCP Line Rekeying for HDCP2.2 on HDMI")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117041247.1084381-1-suraj.kandpal@intel.com
(cherry picked from commit 2499212e21)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When topology changes, before beginning a new HDCP authentication by
sending AKE_init message we need to first authenticate only the
repeater. Only after repeater authentication failure, it makes sense
to start a new HDCP authentication. Even though it made sense to not
enable HDCP directly from check_link and schedule it for later, repeater
authentication needs to be done immediately.
--v2
-Fix comment grammatical errors [Ankit]
Fixes: 47ef55a8b7 ("drm/i915/hdcp: Don't enable HDCP2.2 directly from check_link")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217083723.2883317-1-suraj.kandpal@intel.com
(cherry picked from commit 605a33e765)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Only look up the VBIOS mode during atomic_check if the display mode
changes. For page flips, the previous settings still apply. Avoids the
runtime overhead of looking up the VBIOS mode on each page flip.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-17-tzimmermann@suse.de
The type struct ast_vbios_mode_info used to store information about
the color format and display mode. It has outlived its purpose. Inline
its fields into struct ast_crtc_state and replace all instances.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-16-tzimmermann@suse.de
Replace the large switch statement with a look-up table when selecting
the mode index. Makes the code easier to read. The table is sorted by
resolutions; if run-time overhead from traversal becomes significant,
binary search would be a possible optimization.
The mode index requires a refresh-rate index to be added or subtracted,
which still requires a minimal switch. In the original code, some of
the indices did not contain this computation. Those cases would have been
equivalent to adding 0, so they are now all subsumed in the switch's
default branch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
v3:
- explain the semantics of the new switch statement (Jocelyn)
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-15-tzimmermann@suse.de
ASTDP requires a mode index, depending on the resolution. Move the
look-up code from ast_dp_set_mode() into a separate helper. Inline
the rest of the function into its only caller. Rename the variable
names and register constants to match the programming manual.
As before, the mode-index lookup still happens during the update's
atomic commit. Right now, there's no way of doing it during the atomic
check. The lookup requires the VBIOS mode, which is not available at
the atomic check's invocation. At least warn now if the mode index
could not be found.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-14-tzimmermann@suse.de
The helper ast_get_vbios_mode_info() retrieves hardware-specific format
and display-mode information. Inline the function into its only caller.
While at it, also replace a use of struct drm_format_info.cpp with the
correct DRM 4CC codes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-13-tzimmermann@suse.de
Test DRM display modes against the list of modes supported by the
VBIOS. The helper will respect the supported-modes flags in struct
ast_device. Hence only DRM display modes supported by the VBIOS
will be reported; without the current duplication of this information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-12-tzimmermann@suse.de
Mode lines are independent from hardware Gen or TX chip, so hide all
VBIOS mode tables in ast_vbios.c.
Move the look-up code for VBIOS modes from ast_vbios_get_mode_info()
to ast_vbios_find_mode(). The new look-up function respects the
supported-mode flags in struct ast_device. For example, if a device
does not have struct ast_device.support_fullhd set, the helper does
not return a valid mode for 1920x1080. Taking the supported-mode flags
into account allows for making the VBIOS tables the single reference
for validating and setting display modes against hardware capabilities.
v2:
- replace mode switch with look-up table (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-11-tzimmermann@suse.de
VBIOS mode tables are terminated by an entry with a refresh rate of
0xff. The code is hard to read and fragile to use. Therefore create
an empty entry with AST_VBIOS_MODE_INVALID to terminate each mode list.
Stop at the invalid entry when searching for modes in the tables.
Instead of testing for refresh == 0xff, test with a helper function if
the mode's size and refresh have meaningful values.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-10-tzimmermann@suse.de
The ast driver looks up supplied display modes from an internal list of
display modes supported by the VBIOS.
Do not use the crtc_-prefixed display values from struct drm_display_mode
for looking up the VBIOS mode. The fields contain raw values that the
driver programs to hardware. They are affected by display settings like
double-scan or interlace.
Instead use the regular vdisplay and hdisplay fields for lookup. As the
programmed values can now differ from the values used for lookup, set
struct drm_display_mode.crtc_vdisplay and .crtc_hdisplay from the VBIOS
mode.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-9-tzimmermann@suse.de