Fix all typos in files under drm/i915/pxp reported by codespell tool.
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-5-nitin.r.gote@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix all typos in files under drm/i915/gem reported by codespell tool.
v2: Codespell won't catch it, but it should be
"user defined" and not "use defined". <Krzysztof Niemiec>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-4-nitin.r.gote@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix all typos in files under drm/i915/gt reported by codespell tool.
v2: Fix grammar mistake in comment. <Andi>
v3: Correct typo in commit log. <Krzysztof Niemiec>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-2-nitin.r.gote@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Try HDMI PLL alogorithm for C10 PHY, if there are no pre-computed tables.
Also get rid of the helpers to get rate for HDMI for C10/20 PHY, as we no
longer depend only on pre-computed tables.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120042122.1029481-6-ankit.k.nautiyal@intel.com
Add C10 register bits to be used for computing HDMI PLLs with
algorithm.
v2: Add bspec reference. (Suraj)
v3: Use REG_BIT8 like other reg bits/masks. (Jani)
Bspec: 74166
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122162850.1861410-1-ankit.k.nautiyal@intel.com
Try SNPS_PHY HDMI alogorithm, if there are no pre-computed tables.
Also get rid of the helper to get rate for HDMI snps phy, as we no
longer depend only on pre-computed tables.
v2:
-Prefer pre-computed tables over computed values from algorithm. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120042122.1029481-3-ankit.k.nautiyal@intel.com
Add helpers to calculate the necessary parameters for configuring the
HDMI PLL for SNPS MPLLB and C10 PHY.
The pll parameters are computed for desired pixel clock, curve data
and other inputs used for interpolation and finally stored in the
pll_state.
Currently the helper is used to compute PLLs for DG2 SNPS PHY.
Support for computing Plls for C10 PHY is added in subsequent patches.
v2:
-Used kernel types instead of C99 types. (Jani)
-Fixed styling issues and renamed few variables to more meaningful
names. (Jani)
-Added Xe make file changes. (Jani)
-Fixed build errors reported by kernel test robot
v3:
-Renamed helper to align with file name. (Jani)
v4:
-Removed erroraneous comment, and added Bspec# as part of trailer. (Suraj)
-Fixed warning flagged by kernel test robot.
Bspec: 54032
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120042122.1029481-2-ankit.k.nautiyal@intel.com
Simplify getting a drm_device pointer when using to_i915() in
intel_dp_mst.c from the already available intel_display object, instead
of getting it from a DRM KMS object.
While at it rename dev_priv to i915, following the driver's standard
terminology.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108151916.491113-5-imre.deak@intel.com
Simplify the use of to_intel_display() in intel_dp_mst.c passing it the
already available intel_connector pointer, instead of looking up a
drm_device pointer for the same purpose.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108151916.491113-4-imre.deak@intel.com
Follow the canonical way in intel_dp_mst.c, referencing a connector only
via a struct intel_connector pointer and naming this pointer 'connector'
instead of 'intel_connector', the only exception being the casting of
a drm_connector function parameter pointer to intel_connector, calling
the drm_connector pointer _connector.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108151916.491113-3-imre.deak@intel.com
Gen7 only supports ASTDP. Gens 4 to 6 support various TX chips,
except ASTDP. These boards detect the TX chips by reading the SoC
scratch register as VGACRD1.
Gens 1 to 3 only support SIL164. These boards read the DVO bit from
VGACRA3. Hence move this test behind a branch, so that it does not
run on later generations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-6-tzimmermann@suse.de
Remove the call to ast_dp_launch() from ast_detect_tx_chip() and
perform it unconditionally in ast_post_gpu().
Also add error handling: the detection code apparently used
ast_dp_launch() to test for a working ASTDP, falling back to VGA on
errors. As the VBIOS reports ASTDP, silently ignoring errors is
questionable behavior. With the refactoring, failing to initialize
the ASTDP will also fail probing the driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-5-tzimmermann@suse.de
Reorganize ast_post_gpu() so that it first branches by Gen and then
by config mode and TX chip. This will later make it possible to split
up the function by Gen.
The helper ast_init_3rdtx() only handles Gen4 and Gen5, so leave it
out from the other Gens.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-4-tzimmermann@suse.de
Move DRAM detection before TX-chip detection. Both steps are independent
from each other. Detection of the TX-chip is now next to posting those
chips, which can be done in a single step.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-3-tzimmermann@suse.de
Wide-screen support is relevant for mode validation. Do not detect it
before setting up the mode-setting pipeline. Gets the function call out
of the way of other initialization code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-2-tzimmermann@suse.de
In the combination of DRM_KMS_HELPER=m, DRM_GEM_SHMEM_HELPER=y, DRM_FBDEV_EMULATION=y,
The shmem code fails to link against the KMS helpers:
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_driver_fbdev_probe':
(.text+0xeec601): undefined reference to `drm_fb_helper_alloc_info'
x86_64-linux-ld: (.text+0xeec633): undefined reference to `drm_fb_helper_fill_info'
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_get_page':
drm_fbdev_shmem.c:(.text+0xeec7d2): undefined reference to `drm_gem_fb_get_obj'
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_fb_mmap':
drm_fbdev_shmem.c:(.text+0xeec9f6): undefined reference to `drm_gem_fb_get_obj'
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_defio_imageblit':
(.rodata+0x5b2288): undefined reference to `drm_fb_helper_check_var'
x86_64-linux-ld: (.rodata+0x5b2290): undefined reference to `drm_fb_helper_set_par'
This can happen for a number of device drivers that select DRM_GEM_SHMEM_HELPER
without also selecting DRM_KMS_HELPER. To work around this, add another select
that forces DRM_KMS_HELPER to be built-in rather than a loadable module, but
only if FBDEV emulation is also enabled. DRM_TTM_HELPER and DRM_GEM_DMA_HELPER
look like they have the same problem in theory even if there is no possible
configuration that shows it. For consistency, do the same change to those.
Closes: https://lore.kernel.org/all/20250121-greedy-flounder-of-abundance-4d2ee8-mkl@pengutronix.de
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122090211.3161186-1-arnd@kernel.org
While setting the bounds for compressed bpp, we ensure that the
compressed bpp is less than the pipe bpp.
This causes an issue with the 420 output format, where the effective
link bpp (or output bpp) is half that of the pipe bpp. Therefore instead
of using pipe bpp, use the output bpp to set the bounds for the
compressed bpp.
v2: Use identifier output_bpp instead of link_bpp (Imre)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117050713.152012-1-ankit.k.nautiyal@intel.com
Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a few
cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using only
stable Rust features. In particular, previously we were using the
unstable features 'coerce_unsized', 'dispatch_from_dyn' and 'unsize',
and now we will use the new 'derive_coerce_pointee' one, which is on
track to stabilization. This new feature is a macro that essentially
expands into code that internally uses the unstable features that we
were using before, without having to expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'.
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups.
-----BEGIN PGP SIGNATURE-----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=VLNX
-----END PGP SIGNATURE-----
Merge tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a
few cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using
only stable Rust features. In particular, previously we were using
the unstable features 'coerce_unsized', 'dispatch_from_dyn' and
'unsize', and now we will use the new 'derive_coerce_pointee' one,
which is on track to stabilization. This new feature is a macro
that essentially expands into code that internally uses the
unstable features that we were using before, without having to
expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups"
* tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (32 commits)
kbuild: rust: add PROCMACROLDFLAGS
rust: uaccess: generalize userSliceReader to support any Vec
rust: kernel: add improved version of `ForeignOwnable::borrow_mut`
rust: kernel: reorder `ForeignOwnable` items
rust: kernel: change `ForeignOwnable` pointer to mut
rust: arc: split unsafe block, add missing comment
rust: types: avoid `as` casts
rust: arc: use `NonNull::new_unchecked`
rust: use derive(CoercePointee) on rustc >= 1.84.0
rust: alloc: add doctest for `ArrayLayout::new()`
rust: init: update `stack_try_pin_init` examples
rust: error: import `kernel`'s `LayoutError` instead of `core`'s
rust: str: replace unwraps with question mark operators
rust: page: remove unnecessary helper function from doctest
rust: rbtree: remove unwrap in asserts
rust: init: replace unwraps with question mark operators
rust: use host dylib naming convention to support macOS
rust: add `build_error!` to the prelude
rust: kernel: move `build_error` hidden function to prevent mistakes
rust: use the `build_error!` macro, not the hidden function
...
1) Per-CPU kthreads must stay affine to a single CPU and never execute
relevant code on any other CPU. This is currently handled by smpboot
code which takes care of CPU-hotplug operations. Affinity here is
a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and can't
run anywhere else. The affinity is set through kthread_bind_mask()
and the subsystem takes care by itself to handle CPU-hotplug
operations. Affinity here is assumed to be a correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node. This
is not a correctness constraint but merely a preference in terms of
memory locality. kswapd and kcompactd both fall into this category.
The affinity is set manually like for any other task and CPU-hotplug
is supposed to be handled by the relevant subsystem so that the task
is properly reaffined whenever a given CPU from the node comes up.
Also care should be taken so that the node affinity doesn't cross
isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its own
ad-hoc way.
This is an infrastructure proposal to handle this with the following API
changes:
_ kthread_create_on_node() automatically affines the created kthread to
its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called right
after kthread_create_on_node() to specify a preferred affinity
different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine
to the housekeeping CPUs (which means to all online CPUs most of the
time or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
* Consolidate a bunch of ad-hoc implementations of kthread_run_on_cpu()
* Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
* Add some correctness check to ensure kthread_bind() is always called
before the first kthread wake up.
* Default affine kthread to its preferred node.
* Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
* Implement kthreads preferred affinity
* Unify kthread worker and kthread API's style
* Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation.
-----BEGIN PGP SIGNATURE-----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=g8In
-----END PGP SIGNATURE-----
Merge tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling
-----BEGIN PGP SIGNATURE-----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=5FIc
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There are two external interactions of note, the msm tree pull in some
opp tree, hopefully the opp tree arrives from the same git tree
however it normally does.
There is also a new cgroup controller for device memory, that is used
by drm, so is merging through my tree. This will hopefully help open
up gpu cgroup usage a bit more and move us forward.
There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs.
Then the usual xe/amdgpu/i915/msm leaders and lots of changes and
refactors across the board:
core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on
suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine
instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two
SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling"
* tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits)
drm/bridge: fix documentation for the hdmi_audio_prepare() callback
doc/cgroup: Fix title underline length
drm/doc: Include new drm-compute documentation
cgroup/dmem: Fix parameters documentation
cgroup/dmem: Select PAGE_COUNTER
kernel/cgroup: Remove the unused variable climit
drm/display: hdmi: Do not read EDID on disconnected connectors
drm/tests: hdmi: Add connector disablement test
drm/connector: hdmi: Do atomic check when necessary
drm/amd/display: 3.2.316
drm/amd/display: avoid reset DTBCLK at clock init
drm/amd/display: improve dpia pre-train
drm/amd/display: Apply DML21 Patches
drm/amd/display: Use HW lock mgr for PSR1
drm/amd/display: Revised for Replay Pseudo vblank control
drm/amd/display: Add a new flag for replay low hz
drm/amd/display: Remove unused read_ono_state function from Hwss module
drm/amd/display: Do not elevate mem_type change to full update
drm/amd/display: Do not wait for PSR disable on vbl enable
drm/amd/display: Remove unnecessary eDP power down
...
The scale() functions detects invalid parameters, but continues
its calculations anyway. This causes bad results if negative values
are used for unsigned operations. Worst case, a division by 0 error
will be seen if source_min == source_max.
On top of that, after v6.13, the sequence of WARN_ON() followed by clamp()
may result in a build error with gcc 13.x.
drivers/gpu/drm/i915/display/intel_backlight.c: In function 'scale':
include/linux/compiler_types.h:542:45: error:
call to '__compiletime_assert_415' declared with attribute error:
clamp() low limit source_min greater than high limit source_max
This happens if the compiler decides to rearrange the code as follows.
if (source_min > source_max) {
WARN(..);
/* Do the clamp() knowing that source_min > source_max */
source_val = clamp(source_val, source_min, source_max);
} else {
/* Do the clamp knowing that source_min <= source_max */
source_val = clamp(source_val, source_min, source_max);
}
Fix the problem by evaluating the return values from WARN_ON and returning
immediately after a warning. While at it, fix divide by zero error seen
if source_min == source_max.
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: David Laight <david.laight.linux@gmail.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121145203.2851237-1-linux@roeck-us.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The migration support only needs to be initialized once, but it
was incorrectly called from the xe_gt_sriov_pf_init_hw(), which
is part of the reset flow and may be called multiple times.
Fixes: d86e3737c7 ("drm/xe/pf: Add functions to save and restore VF GuC state")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120232443.544-1-michal.wajdeczko@intel.com
UMD's have interest in setting unused bits of the oa_ctrl register "out of
band" for certain experiments. To facilitate this, don't clobber previous
oa_ctrl unused bits, i.e. rmw the values rather than simply write them.
Fixes: e936f885f1 ("drm/xe/oa/uapi: Expose OA stream fd")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117032155.3048063-1-ashutosh.dixit@intel.com
We have at least two options for how to do the
TRANS_PUSH_SEND + commit completion signalling
with the DSB:
Option A)
1. trigger TRANS_PUSH_SEND
2. wait for "safe window"
3. signal the interrupt
In this cases step 2 should not do anything if we were already
between vmin and vmax decision boundaries. Otherwise we'll wait
until the next start of the vblank period.
Option B)
1. wait for "safe window"
2. trigger TRANS_PUSH_SEND
3. signal the interrupt
This option is perhaps a bit less racy, but if we do somehow
screw up and the wait is a nop but the push gets deferred
until the next frame then we'll end up completing the commit
a frame too early.
So for now I'm leaning towards option A since losing the race
won't have any drastic consequences. To deal with the race we
can give the DSB a bit more time to start step 2 before the
hardware has started the vblank termination properly. Often
times it seems to be fast enough to make it in time even without
any extra vblank delay (the push is issued somewhere within a
scanline and it latches on the next scanline).
v2: Use intel_vrr_possible() to determine if we need some
vblank delay (also avoids adding it for DSI which doens't
actually program the transcoder registers correctly for it)
Cc: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116201637.22486-8-ville.syrjala@linux.intel.com
GOP might not agree with our idea of what the vblank delay should be.
Reuse the LRR codepaths to fix that up via a fastset.
The relevant registers aren't actually double buffered so this is a
little bit dodgy. While I've not seen any real issues from frobbing
these live, let's limit this to just the fastboot case (by only
allowing it when old_crtc_state->inherited==true).
Cc: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116201637.22486-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Update TRANS_SET_CONTEXT_LATENCY in intel_set_transcoder_timings_lrr()
as well. While for actual LRR updates this should not change, I want
to reuse this code to also sanitize the vblank delay during boot,
and in that case we do need to update this.
Cc: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116201637.22486-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
I want to start using intel_set_transcoder_timings_lrr() also for
fixing up the vblank delay during boot. To that end make sure it
can cope with interlaced modes as well.
Note that we have soft-defeatured interlaced modes on tgl+ so
technically this is dead code, but if we ever have the need to
bring interlaced support back it seems better to handle this.
Cc: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116201637.22486-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_set_transcoder_timings() will set TRANS_VBLANK.vblank_start to 0
for clarity on ADL+ (non-DSI) because the hardware no longer uses that
value. Do the same in intel_set_transcoder_timings_lrr() to make sure
the registers stay consistent even when doing LRR timing updates.
Cc: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116201637.22486-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Code for the DP tunnelling functionality in the xe driver can be
built only if the display code is also built, adjust the kconfig
dependency accordingly.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Fixes: 73900dce57 ("drm/xe/dp: Enable DP tunneling")
Reported-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117153843.1312303-1-imre.deak@intel.com
This is already handled below in the code by fixup_initial_plane_config.
Fixes: a815362752 ("drm/i915: Try to relocate the BIOS fb to the start of ggtt")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210083111.230484-3-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
It was mentioned in a review that there is a possibility of choosing
to load the module with VF in execlists mode.
Of course this doesn't work, just bomb out as hard as possible.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210083111.230484-12-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
When testing on my tiled display, initially the tiled display is
detected correctly:
[90376.523692] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] fallback: Not all outputs enabled
[90376.523713] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] Enabled: 0, detected: 2
...
[90376.523967] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 1920x2160 set (1920,0)
[90376.524020] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:134:pipe B] desired mode 1920x2160 set (0,0)
But then, when modes have been set:
[90379.729525] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] [CONNECTOR:287:DP-4] on [CRTC:82:pipe A]: 1920x2160
[90379.729640] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] [CONNECTOR:289:DP-5] on [CRTC:134:pipe B]: 1920x2160
...
[90379.730036] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 1920x2160 set (0,0)
[90379.730124] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:134:pipe B] desired mode 1920x2160 set (0,0)
Call drm_client_get_tile_offsets() in drm_client_firmware_config() as
well, to ensure that the offset is set correctly.
This has to be done as a separate pass, as the tile order may not be
equal to the drm connector order.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116142825.3933-2-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Cc: <stable@vger.kernel.org>
Tiled displays have a different x/y offset to begin with. Instead of
attempting to remember this, just apply a delta instead.
This fixes the first tile being duplicated on other tiles when vt
switching.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116142825.3933-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Cc: <stable@vger.kernel.org>
A specific allocation for the CRTC is not strictly necessary at this
point, but in order to implement dynamic configuration of VKMS (configFS),
it will be easier to have one allocation per CRTC.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117-b4-vkms-allocated-v4-3-8ec8fd21aaf6@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
A specific allocation for the encoder is not strictly necessary at this
point, but in order to implement dynamic configuration of VKMS (configFS),
it will be easier to have one allocation per encoder.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117-b4-vkms-allocated-v4-2-8ec8fd21aaf6@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>