Commit graph

126,670 commits

Author SHA1 Message Date
Louis Chauvet
b0a76faea6
drm/vkms: Switch to dynamic allocation for connector
A specific allocation for the connector is not strictly necessary
at this point, but in order to implement dynamic configuration of
VKMS (configFS), it will be easier to have one allocation per
connector.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117-b4-vkms-allocated-v4-1-8ec8fd21aaf6@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-01-21 10:57:01 +01:00
Jouni Högander
edbfa38ffa drm/i915/psr: Allow changing Panel Replay mode without full modeset
Currently we are forcing full modeset if Panel Replay mode is changed. This
is not necessary as long as we are not changing sink PANEL REPLAY ENABLE
bit in PANEL REPLAY ENABLE AND CONFIGURATION 1 register. This can be
achieved by entering Panel Replay inactive mode (Live Frame mode) when
Panel Replay is disabled and keep PANEL REPLAY ENABLE bit in PANEL REPLAY
ENABLE AND CONFIGURATION 1 enabled always if panel is just supporting Panel
Replay.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109103532.2093356-5-jouni.hogander@intel.com
2025-01-21 11:55:34 +02:00
Jouni Högander
4917c46411 drm/i915/psr: Make intel_psr_enable_sink as local static function
Intel_psr_enable_sink is not used outside intel_psr.c. Convert it as local
static function.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109103532.2093356-4-jouni.hogander@intel.com
2025-01-21 11:55:34 +02:00
Jouni Högander
68f3a505b3 drm/i915/psr: Enable Panel Replay on sink always when it's supported
Currently we are configuring Panel Replay on sink when it get's
enabled. This means we need to do full modeset when enabling Panel
Replay. This is required as DP specification is saying sink Panel Replay
needs to be configured before link training. Avoid full modeset by enabling
Panel Replay on sink always when it's supported by the sink and the
source.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109103532.2093356-3-jouni.hogander@intel.com
2025-01-21 11:55:34 +02:00
Jouni Högander
a20dea718f drm/i915/psr: Add new function for writing sink panel replay enable bit
According to DP/eDP specification only DP_PANEL_REPLAY_ENABLE has to be set
prior link training. For this purpose add a new function which sets this
bit on sink side if Panel Replay is supported by the sink and the source.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109103532.2093356-2-jouni.hogander@intel.com
2025-01-21 11:55:34 +02:00
Louis Chauvet
23fdf43089
drm/vkms: Switch to managed for writeback connector
The current VKMS driver uses non-managed function to create
writeback connectors. It is not an issue yet, but in order
to support multiple devices easily, convert this code to
use drm and device managed helpers.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-8-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-01-21 10:32:33 +01:00
Louis Chauvet
1914ba2b91
drm: writeback: Create drmm variants for drm_writeback_connector initialization
To allows driver to only use drmm objects, add helper to create
drm_writeback_connectors with automated lifetime management.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-7-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-01-21 10:32:33 +01:00
Louis Chauvet
2f3f4a7363
drm: writeback: Add missing cleanup in case of initialization failure
The current implementation of drm_writeback_connector initialization does
not properly clean up all resources in case of failure (allocated
properties and possible_encoders). Add this cleaning in case of failure.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-6-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-01-21 10:32:33 +01:00
Louis Chauvet
135d8fc7af
drm: writeback: Create an helper for drm_writeback_connector initialization
As the old drm and the new drmm variants of drm_writeback_connector
requires almost the same initialization, create an internal helper to do
most of the initialization work.

Currently there is no cleanup function for writeback connectors. To allows
implementation of drmm variant of writeback connector, create a cleanup
function that can be used to properly remove all the writeback-specific
properties and allocations.

This also introduce an helper to cleanup only the drm_writeback_connector
properties, so it can be used during initialization to cleanup in case of
failure.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-5-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-01-21 10:32:32 +01:00
Louis Chauvet
8dd92e6eee
drm/vkms: Switch to managed for crtc
The current VKMS driver uses managed function to create crtc, but
don't use it to properly clean the crtc workqueue. It is not an
issue yet, but in order to support multiple devices easily,
convert this code to use drm and device managed helpers.

Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-4-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-01-21 10:32:32 +01:00
Louis Chauvet
c367b772e6
drm/managed: Add DRM-managed alloc_ordered_workqueue
Add drmm_alloc_ordered_workqueue(), a helper that provides managed ordered
workqueue cleanup. The workqueue will be destroyed with the final
reference of the DRM device.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-3-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-01-21 10:32:31 +01:00
Louis Chauvet
16d22ba2de
drm/vkms: Switch to managed for encoder
The current VKMS driver uses non-managed function to create encoders. It
is not an issue yet, but in order to support multiple devices easily,
convert this code to use drm and device managed helpers.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-2-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-01-21 10:32:31 +01:00
Louis Chauvet
0a3f3f7c5d
drm/vkms: Switch to managed for connector
The current VKMS driver uses non-managed function to create connectors. It
is not an issue yet, but in order to support multiple devices easily,
convert this code to use drm and device managed helpers.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-1-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-01-21 10:32:30 +01:00
Maarten Lankhorst
67a98f7e27 drm/xe/display: Re-use display vmas when possible
i915 has this really nice, infrastructure where everything becomes
complicated, GGTT needs eviction, etc..

Lets not do that, and make the dumbest possible interface instead.
Try to retrieve the VMA from old_plane_state, or intel_fbdev if kernel
fb.

Link: https://patchwork.freedesktop.org/patch/msgid/20241206182032.196307-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Tested-by: Jani Saarinen <jani.saarinen@intel.com>
2025-01-21 09:47:57 +01:00
Suraj Kandpal
2499212e21 drm/i915/hdcp: Use correct function to check if encoder is HDMI
Use intel_encoder_is_hdmi function which was recently introduced to
see if encoder is HDMI or not.

--v2
-Add Fixes tag [Jani]

Fixes: 6a3691ca47 ("drm/i915/hdcp: Disable HDCP Line Rekeying for HDCP2.2 on HDMI")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117041247.1084381-1-suraj.kandpal@intel.com
2025-01-21 10:22:30 +05:30
Ville Syrjälä
6f7c813c88 drm/i915: Carve up skl_get_plane_caps()
Split skl_get_plane_caps() into four variants:
skl_plane_caps(), glk_plane_caps(), icl_plane_caps(),
tgl_plane_caps().

Makes it easier to figure out what is actually going on there.

v2: skl_plane_caps() should return u8 not bool

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241010164617.10280-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2025-01-20 22:10:19 +02:00
Ville Syrjälä
71ca471515 drm/i915: Relocate xe AUX hack
Move the xe AUX neutering out from skl_get_plane_caps() into the
caller so that it'll be easier to refactor skl_get_plane_caps()
into a more readable shape. This isn't really hardware specific
anyway, and just some kind of bug/misfeature of xe.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-9-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2025-01-20 22:03:03 +02:00
Ville Syrjälä
e7dfd7c60e drm/i915: Nuke ADL pre-production Wa_22011186057
Wa_22011186057 (some CCS problem) only affected ADL A-stepping,
which I presume is pre-production hw. Drop the dead code.

Bspec: 54369
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-8-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2025-01-20 22:01:19 +02:00
Ville Syrjälä
8e1096fd03 drm/i915: Disable scanout VT-d workaround for TGL+
TGL+ should no longer need any VT-d scanout workarounds.
Don't apply any.

Not 100% sure whether pre-SNB might also suffer from this. The
workaround did originate on SNB but who knows if it was just
never caught before that. Not that I ever managed to enable
VT-d any older hardware. Last time I tried on my ILK it ate
the disk!

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-7-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2025-01-20 22:00:30 +02:00
Ville Syrjälä
d851663664 drm/i915: Reuse vlv_primary_min_alignment() for sprites as well
Rename vlv_primary_min_alignment() to vlv_plane_min_alignment()
and use it to replace vlv_sprite_min_alignment() since the
behaviour is now identical when the plane init doesn't set up
any async flips stuff.

Technically VLV/CHV sprites do support async flips, so this
also makes us a bit more future proof if/when we extend async
flip support to more than one plane.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-6-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2025-01-20 21:59:54 +02:00
Ville Syrjälä
2f4c92166e drm/i915: Use plane->can_async_flip() for alignment exceptions
Async flips often require bigger alignment that sync flips.
Currently we have HAS_ASYNC_FLIPS() checks strewn about to
inidcate that async flips are generally supported and thus
we want more alignment. Switch that over to using
intel_plane_can_async_flip() so that we can handle these
in a slightly less messy way. Currently we don't have cases
where async flips would require different alignment for
different modifiers on the same plane.

We'll also move the HAS_ASYNC_FLIPS() check to the plane init
code so that we can still use that as a quick way to disable
the async flips workarounds for testing purposes.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-5-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2025-01-20 21:58:37 +02:00
Ville Syrjälä
7cc1e19703 drm/i915: Introduce plane->can_async_flip()
Move the "does this modifier support async flips?" check
to be handled by the platform specific plane code instead
of having a big mess in common code.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-4-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2025-01-20 21:56:56 +02:00
Ville Syrjälä
e2bd89d1ae drm/i915: Allow async flips with compression on ICL
Apparently ICL can do async flips with CCS. In fact it already
seems to work on GLK, but apparently can lead to underruns there
so we'll only enable it for ICL.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-3-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2025-01-20 21:56:24 +02:00
Ville Syrjälä
38f039f459 drm/i915: Allow async flips with render compression on TGL+
Looks like CCS + async flips has been a thing for a while now.
Enable this for TGL+ render compression modifiers.

Note that we can't update AUX_DIST during async flips we must
check to make sure it remains unchanged.

We also can't do clear color. Supposedly there was some attempt
to make it work, but apparently the issues only got ironed out
in MTL. For now we'll not worry about it and refuse async flips
with clear color modifiers.

Bspec claims that media compression doesn't support async flips.
Based on a quick test it does seem to work to some degree, but
perhaps it has issues as well. Let's trust the spec here and
continue to refuse async flips + media compression.

Bspec: 49250,49251,49252,49253
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-2-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2025-01-20 21:55:38 +02:00
Tvrtko Ursulin
cdb73451bc drm/imagination: Use the drm_sched_job_has_dependency helper
Instead of manually peeking into the DRM scheduler implementation details
lets use the previously added helper.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Cc: Frank Binns <frank.binns@imgtec.com>
Cc: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113103341.43914-2-tvrtko.ursulin@igalia.com
2025-01-20 09:20:22 +01:00
Tvrtko Ursulin
51678bb9a7 drm/sched: Add helper to check job dependencies
Lets isolate scheduler internals from drivers such as pvr which currently
walks the dependency array to look for fences.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113103341.43914-1-tvrtko.ursulin@igalia.com
2025-01-20 09:20:21 +01:00
Maíra Canal
e8941ac97f
drm/vc4: Remove BOs seqnos
`bo->seqno`, `bo->write_seqno`, and `exec->bin_dep_seqno` are leftovers
from a time when VC4 didn't support DMA Reservation Objects. Before DMA
Resv was introduced, tracking the correspondence between BOs and jobs
through the job's seqno made sense.

However, this is no longer needed, as VC4 now supports DMA Reservation
Objects and attaches the "job done" fence to the BOs. Therefore, remove
the BOs seqnos in favor of using DMA Resv Objects.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220134204.634577-4-mcanal@igalia.com
2025-01-19 15:31:00 -03:00
Maíra Canal
21bd85f82e
drm/vc4: Use DMA Resv to implement VC4 wait BO IOCTL
Since the BOs used by VC4 have DMA Reservation Objects attached to
them, waiting for seqnos to check BO availability is unnecessary.
Instead, `drm_gem_dma_resv_wait()` can be used.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220134204.634577-3-mcanal@igalia.com
2025-01-19 15:30:54 -03:00
Maíra Canal
04630796c4
drm/vc4: Use DRM Execution Contexts
VC4 has internal copies of `drm_gem_lock_reservations()` and
`drm_gem_unlock_reservations()` within the driver. Ideally, these
hard-coded functions should be replaced with the generic functions
provided by DRM common code. However, instead of using the DRM GEM
functions to (un)lock reservations, transition to the new DRM Execution
Contexts API.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220134204.634577-2-mcanal@igalia.com
2025-01-19 15:30:23 -03:00
Vivek Kasireddy
6568d423cb drm/virtio: Don't return error if virtio-gpu PCI dev is not found
While fixing a shared VGA resource ownership issue, commit 5dd8b536bb
("drm/virtio: Lock the VGA resources during initialization") wrongly
assumed that there is always a PCI device associated with virtio-gpu
and it would return error if this device is not found during init.

This is incorrect, as virtio-gpu can be operated in MMIO mode (M68K)
where a PCI device would probably not be created for it. Therefore,
fix this issue by not erroring out if the associated PCI device is
not found during initialization.

Fixes: 5dd8b536bb ("drm/virtio: Lock the VGA resources during initialization")
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114075759.2616551-1-vivek.kasireddy@intel.com
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114075759.2616551-1-vivek.kasireddy@intel.com
2025-01-19 15:24:27 +03:00
Vivek Kasireddy
db8b2c0e2a drm/virtio: Fix UAF in virtgpu_dma_buf_free_obj()
Fix the following issues identified by Smatch static checker:
- The call to dma_buf_put(attach->dmabuf) after dma_buf_detach()
  leads to a UAF bug as dma_buf_detach() frees the attach object.
  Fix this by extracting the dmabuf object from attach and using
  that in the call to dma_buf_put().

- The resv object is extracted from attach before checking to see
  if attach is valid (that is !NULL) or not. Although, attach would
  very likely be valid, fix this by making sure that the resv object
  is used only after ensuring that attach is valid.

Fixes: 2885e575ab ("drm/virtio: Add helpers to initialize and free the imported object")
Fixes: ca77f27a26 ("drm/virtio: Import prime buffers from other devices as guest blobs")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212055421.775759-1-vivek.kasireddy@intel.com
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
[dmitry.osipenko@collabora.com: Edited commit title]
2025-01-19 15:12:28 +03:00
Satyanarayana K V P
173baa1b2d drm/xe: Suppress printing of mode when running in non-sriov mode
The xe_sriov_probe_early() function prints the sriov pf/vf mode on
driver probe. When running in non-sriov mode, the below debug message
is seen.

"Running in none mode".

This print does not convey any information. This commit suppresses this
debug message and shows only when running in PF/VF mode.

Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116055617.20611-1-satyanarayana.k.v.p@intel.com
2025-01-19 00:39:45 +01:00
Michal Wajdeczko
238f96315a drm/xe/kunit: Add KUnit tests for GuC Buffer Cache
Add tests to make sure that recently added GuC Buffer Cache
component is working as expected.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114192140.1039-1-michal.wajdeczko@intel.com
2025-01-19 00:12:07 +01:00
Michal Wajdeczko
f90b552dcb drm/xe/kunit: Allow to replace xe_managed_bo_create_pin_map()
We want to use replacement functions in upcoming kunit tests.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-11-michal.wajdeczko@intel.com
2025-01-19 00:12:06 +01:00
Michal Wajdeczko
d8b2149ba8 drm/xe/pf: Use GuC Buffer Cache during VFs provisioning
Start using GuC buffer cache for the VF's configuration actions.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-10-michal.wajdeczko@intel.com
2025-01-19 00:12:05 +01:00
Michal Wajdeczko
696bfdf273 drm/xe/guc: Introduce the GuC Buffer Cache
The purpose of the GuC Buffer Cache is to maintain a set ofreusable
buffers that could be used while sending some of the CTB H2G actions
that require separate buffer with indirect data. Currently only few
PF actions need this so initialize it only when running as a PF.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-9-michal.wajdeczko@intel.com
2025-01-19 00:12:03 +01:00
Michal Wajdeczko
c49ca67181 drm/xe/sa: Minor header cleanups
Drop unused struct xe_bo forward declaration and, while around,
fix unnecessary line split in xe_sa_bo_free() declaration.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-8-michal.wajdeczko@intel.com
2025-01-19 00:12:02 +01:00
Michal Wajdeczko
ae8b507fb8 drm/xe/sa: Allow creating suballocator with custom guard size
Actual xe_sa_manager implementation uses hardcoded 4K to exclude
it from making suballocations but in upcoming patch we want to
reuse the xe_sa_manager where such 4K guard is not needed. Add
another variant of the xe_sa_bo_manager_init() function that
accepts arbitrary guard size.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-7-michal.wajdeczko@intel.com
2025-01-19 00:12:00 +01:00
Michal Wajdeczko
0e1871f61e drm/xe/sa: Allow making suballocations using custom gfp flags
Actual xe_sa_manager implementation uses hardcoded GFP_KERNEL flag
during creation of suballocations but in upcoming patch we want to
reuse the xe_sa_manager in places where GFP_KERNEL is not allowed.
Add another variant of the xe_sa_bo_new() function that accepts
arbitrary gfp flags.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-6-michal.wajdeczko@intel.com
2025-01-19 00:11:59 +01:00
Michal Wajdeczko
7e937cdf18 drm/xe/sa: Tidy up coding style in init()
There is no need to use tile_to_xe() since we already got the xe.
And we should keep all variable declarations together, no need for
separate sa_manager declaration.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-5-michal.wajdeczko@intel.com
2025-01-19 00:11:58 +01:00
Michal Wajdeczko
97ee0e351f drm/xe/sa: Improve error message on init failure
Instead of raw errno value we can print friendly error code and
also print size of the buffer object that we fail to prepare.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-4-michal.wajdeczko@intel.com
2025-01-19 00:11:57 +01:00
Michal Wajdeczko
d29cddd49b drm/xe/sa: Drop redundant NULL assignments
The sa_manager is drmm_kzalloc'ed so all members are already zero.
And in case of kvzalloc() failure we are not returning pointer to
the sa_manager at all, so no point in resetting .bo member.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-3-michal.wajdeczko@intel.com
2025-01-19 00:11:57 +01:00
Michal Wajdeczko
9cd3f4efc8 drm/xe/sa: Always call drm_suballoc_manager_fini()
After successful call to drm_suballoc_manager_init() we should
make sure to call drm_suballoc_manager_fini() as it may include
some cleanup code even if we didn't start using it for real.

As we can abort init() early due to kvzalloc() failure, we should
either explicitly call drm_suballoc_manager_fini() or, even better,
postpone drm_suballoc_manager_init() once we finish all other
preparation steps, so we can rely on fini() that will do cleanup.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220194205.995-2-michal.wajdeczko@intel.com
2025-01-19 00:11:56 +01:00
Michal Wajdeczko
13265fe742 drm/xe/vf: Perform early GT MMIO initialization to read GMDID
VFs need to communicate with the GuC to obtain the GMDID value
and existing GuC functions used for that assume that the GT has
it's MMIO members already setup. However, due to recent refactoring
the gt->mmio is initialized later, and any attempt by the VF to use
xe_mmio_read|write() from GuC functions will lead to NPD crash due
to unset MMIO register address:

[] xe 0000:00:02.1: [drm] Running in SR-IOV VF mode
[] xe 0000:00:02.1: [drm] GT0: sending H2G MMIO 0x5507
[] BUG: unable to handle page fault for address: 0000000000190240

Since we are already tweaking the id and type of the primary GT to
mimic it's a Media GT before initializing the GuC communication,
we can also call xe_gt_mmio_init() to perform early setup of the
gt->mmio which will make those GuC functions work again.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114211347.1083-1-michal.wajdeczko@intel.com
2025-01-18 22:04:59 +01:00
Michal Wajdeczko
bbd8429264 drm/xe: Always setup GT MMIO adjustment data
While we believed that xe_gt_mmio_init() will be called just once
per GT, this might not be a case due to some tweaks that need to
performed by the VF driver during early probe.  To avoid leaving
any stale data in case of the re-run, reset the GT MMIO adjustment
data for the non-media GT case.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114175955.2299-2-michal.wajdeczko@intel.com
2025-01-18 22:03:42 +01:00
John Harrison
709631924e drm/i915/uc: Include requested frequency in slow firmware load messages
To aid debug of sporadic issues, include the requested frequency in
the debug message as well as the actual frequency. That way we know
for certain that the clamping is not because the driver forgot to ask.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241221014329.4048408-1-John.C.Harrison@Intel.com
2025-01-17 11:29:08 -08:00
Andy Yan
c03dd019f0 drm/panel-edp: Add BOE NV140FHM-NZ panel entry
Add an eDP panel entry for BOE NV140FHM-NZ.

No datasheet found for this panel, so the timing
is based on a similar NV140FHM-N41 datasheet that
I can find on internet[0].

edid:
00 ff ff ff ff ff ff 00 09 e5 09 0b 00 00 00 00
01 20 01 04 a5 1f 11 78 03 9b 75 99 5b 5d 8f 2a
23 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 c8 37 80 cc 70 38 28 40 6c 30
aa 00 35 ae 10 00 00 1a 00 00 00 fd 00 30 3c 43
43 8f 01 0a 20 20 20 20 20 20 00 00 00 fe 00 42
4f 45 20 48 46 0a 20 20 20 20 20 20 00 00 00 fe
00 4e 56 31 34 30 46 48 4d 2d 4e 34 5a 0a 00 35

[0]:http://www.tfinno.com/PIC/PIC/20215121628440.pdf

Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117010039.1815430-1-andyshrk@163.com
2025-01-17 08:35:23 -08:00
Francois Dugast
474c4dd29f drm/xe: Add missing SPDX license identifiers
Ensure all Xe driver files have a proper SPDX license identifier, add it
in files where it was missing.

Link: https://patchwork.freedesktop.org/patch/msgid/20250116124532.1480351-1-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-01-17 15:25:52 +01:00
Gustavo Sousa
9983fd3c8d drm/i915/dmc_wl: Track pipe interrupt registers
Pipe interrupt registers live in their respective pipes' power wells,
which are below PG0. That means that they must also be tracked as
registers that are powered-off during dynamic DC states.

There are probably more ranges that we need to track down and add to the
powered_off_ranges. However, let's make this change only about pipe
interrupt registers to fix some vblank timeouts observed due to the DMC
wakelock not being taken for those registers.

In the future, we might want to replace powered_off_ranges with a new
table to represent registers in PG0, which should be probably easier to
maintain. Any register not belonging to that table should be considered
powered off during dynamic DC states and, as such, requiring the DMC
wakelock for access.

Bspec: 72519, 71583
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113204306.112266-4-gustavo.sousa@intel.com
2025-01-17 08:34:59 -03:00
Gustavo Sousa
6d531e3505 drm/i915/display: Wrap IRQ-specific uncore functions
The current display IRQ code calls some IRQ-specific helpers that use
intel_uncore_*() MMIO functions instead of the display-specific ones.
Wrap those helpers to ensure that the proper display-specific hooks
(currently only DMC wakelock handling) are called.

v2:
 - Move functions to intel_display_irq.c instead of having them in
   intel_de.h. (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113204306.112266-3-gustavo.sousa@intel.com
2025-01-17 08:34:49 -03:00