If devm_i2c_new_dummy_device() fails then we were supposed to return an
error code, but instead the function continues and will crash on the next
line. Add the missing return statement.
Fixes: 0497236287 ("drm/bridge: Add ITE IT6263 LVDS to HDMI converter")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/804a758b-f2e7-4116-b72d-29bc8905beed@stanley.mountain
After a job completes, the corresponding pointer in the device must
be set to NULL. Failing to do so triggers a warning when unloading
the driver, as it appears the job is still active. To prevent this,
assign the job pointer to NULL after completing the job, indicating
the job has finished.
Fixes: 14d1d19086 ("drm/v3d: Remove the bad signaled() implementation.")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113154741.67520-1-mcanal@igalia.com
The "mmio_ext" and 'REG_EXT" code is currently unused on any existing
platform. Going forward, this also isn't the design we want to use for
any future platforms/features either, so we should just go ahead and
remove the dead code to avoid confusion.
mmio_ext was originally added in an attempt to hack around the early
(mis)design of the Xe driver, which used xe_gt as the target for all
register MMIO access, even those completely unrelated to the GT subunit
of the hardware. With the introduction of commit 34953ee349 ("drm/xe:
Create dedicated xe_mmio structure") and its follow-up patches, that
misdesign has been corrected and access to register MMIO regions
specific to hardware units is now done through xe_mmio structures which
encapsulate an iomap, region size, and some other metadata.
Although all of the registers used by the driver today happen to fall
within one specific PCI BAR region, and thus re-use a single device-wide
iomap, there's no requirement that this stay true for future platforms
or features. I.e., if a future platform adds a new 'foo' hardware unit
that exists at a different area in the BAR, or even in a completely
different BAR, then that would be handled by doing a separate iomap of
that unit's register region and wrapping it in its own 'struct xe_mmio
foo_regs' structure. The pointer to the new 'foo_regs' could be placed
within the xe_device, xe_tile, xe_gt, etc., according to where the new
hardware unit falls within the current hardware hierarchy.
This effectively reverts the following commits, although parts of these
commits had already vanished or changed with the earlier xe_mmio
refactor work:
- commit 399a13323f ("drm/xe: add 28-bit address support in struct
xe_reg")
- commit fdef72e02e ("drm/xe: add a flag to bypass multi-tile config
from MTCFG reg")
- commit 866b2b1764 ("drm/xe: add MMIO extension support flags")
- commit ef29b390c7 ("drm/xe: map MMIO BAR according to the num of
tiles in device desc")
- commit a4e2f3a299 ("drm/xe: refactor xe_mmio_probe_tiles to support
MMIO extension")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Koby Elbaz <kelbaz@habana.ai>
Acked-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106234312.2986065-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
CPU jobs, like Cache Clean jobs, execute synchronously once the DRM
scheduler starts running them. Consequently, a global `v3d->cpu_job`
variable is unnecessary, as everything is managed within the
`v3d_cpu_job_run()` function.
This commit removes the `v3d->cpu_job` pointer, as it is not needed.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113154741.67520-2-mcanal@igalia.com
Adds a new BO param that keeps the reservation locked after creation.
This removes the need to re-reserve the BO after creation which is a
waste of cycles.
This also fixes a bug in vmw_prime_import_sg_table where the imported
reservation is unlocked twice.
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Fixes: b32233acce ("drm/vmwgfx: Fix prime import/export")
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110185335.15301-1-ian.forbes@broadcom.com
The recently introduced hotplug event handler in the HDMI Connector
framework attempts to unconditionally read the EDID data, leading to a
bunch of non-harmful, yet quite annoying DDC/I2C related errors being
reported.
Ensure the operation is done only for connectors having the status
connected or unknown. Additionally, perform an explicit reset of the
connector information when dealing with a disconnected status.
Fixes: ab716b74dc ("drm/display/hdmi: implement hotplug functions")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113-hdmi-conn-edid-read-fix-v2-1-d2a0438a44ab@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Atomic check should succeed when disabling a connector. Add a test
case drm_test_check_disabling_connector() to make sure of this.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110084821.3239518-3-victor.liu@nxp.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
It's ok to pass atomic check successfully if an atomic commit tries to
disable the display pipeline which the connector belongs to. That is,
when the crtc or the best_encoder pointers in struct drm_connector_state
are NULL, drm_atomic_helper_connector_hdmi_check() should return 0.
Without the check against the NULL pointers, drm_default_rgb_quant_range()
called by drm_atomic_helper_connector_hdmi_check() would dereference
the NULL pointer to_match in drm_match_cea_mode().
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
drm_default_rgb_quant_range+0x0/0x4c (P)
drm_bridge_connector_atomic_check+0x20/0x2c
drm_atomic_helper_check_modeset+0x488/0xc78
drm_atomic_helper_check+0x20/0xa4
drm_atomic_check_only+0x4b8/0x984
drm_atomic_commit+0x48/0xc4
drm_framebuffer_remove+0x44c/0x530
drm_mode_rmfb_work_fn+0x7c/0xa0
process_one_work+0x150/0x294
worker_thread+0x2dc/0x3dc
kthread+0x130/0x204
ret_from_fork+0x10/0x20
Fixes: 8ec116ff21 ("drm/display: bridge_connector: provide atomic_check for HDMI bridges")
Fixes: 84e541b1e5 ("drm/sun4i: use drm_atomic_helper_connector_hdmi_check()")
Fixes: 65548c8ff0 ("drm/rockchip: inno_hdmi: Switch to HDMI connector")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110084821.3239518-2-victor.liu@nxp.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
That is needed to enforce isolation between contexts.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit def59436fb)
Cc: stable@vger.kernel.org
Disable gfxoff with the compute workload on gfx12. This is a
workaround for the opencl test failure.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2affe2bbc9)
Cc: stable@vger.kernel.org # 6.12.x
This commit enables the cleaner shader feature for GFX12.0 and GFX12.0.1
GPUs. The cleaner shader is important for clearing GPU resources such as
Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and
Scalar General Purpose Registers (SGPRs) between workloads.
- This feature ensures that GPU resources are reset between workloads,
preventing data leaks and ensuring accurate computation.
By enabling the cleaner shader, this update enhances the security and
reliability of GPU operations on GFX12.0 hardware.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mark options only meant to be used for debugging as unsafe so that the
kernel is tainted when they are used.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That is needed to enforce isolation between contexts.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We sometimes have people trying to use debugging options in production
environments.
Mark options only meant to be used for debugging as unsafe so that the
kernel is tainted when they are used.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lets use the existing helper instead of peeking into the structure
directly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable gfxoff with the compute workload on gfx12. This is a
workaround for the opencl test failure.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Added a testcase to verify the multiroot force merge fini.
- Added a new field in_use to track the mm freed status.
v2:(Matthew)
- Add kunit_fail_current_test() when WARN_ON is true.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241226070116.309290-2-Arunpravin.PaneerSelvam@amd.com
If buddy manager have more than one roots and each root have sub-block
need to be free. When drm_buddy_fini called, the first loop of
force_merge will merge and free all of the sub block of first root,
which offset is 0x0 and size is biggest(more than have of the mm size).
In subsequent force_merge rounds, if we use 0 as start and use remaining
mm size as end, the block of other roots will be skipped in
__force_merge function. It will cause the other roots can not be freed.
Solution: use roots' offset as the start could fix this issue.
Signed-off-by: Lin.Cao <lincao12@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241226070116.309290-1-Arunpravin.PaneerSelvam@amd.com
The update of the residency values needs to be protected by a lock to
avoid multiple entrypoints, for example when multiple userspace clients
read the sysfs file. Other in-kernel clients are going to be added to
sample these values, making the problem worse. Protect those updates
with a raw_spinlock so it can be called by future integration with perf
pmu.
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110173308.2412232-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Mesa changed its clear color alignment from 4k to 64 bytes
without informing the kernel side about the change. This
is now likely to cause framebuffer creation to fail.
The only thing we do with the clear color buffer in i915 is:
1. map a single page
2. read out bytes 16-23 from said page
3. unmap the page
So the only requirement we really have is that those 8 bytes
are all contained within one page. Thus we can deal with the
Mesa regression by reducing the alignment requiment from 4k
to the same 64 bytes in the kernel. We could even go as low as
32 bytes, but IIRC 64 bytes is the hardware requirement on
the 3D engine side so matching that seems sensible.
Note that the Mesa alignment chages were partially undone
so the regression itself was already fixed on userspace
side.
Cc: stable@vger.kernel.org
Cc: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13057
Closes: https://lore.kernel.org/all/45a5bba8de009347262d86a4acb27169d9ae0d9f.camel@xry111.site/
Link: 17f97a69c1
Link: 888f63cf1b
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-2-ville.syrjala@linux.intel.com
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit ed3a892e5e)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Commit c6a837088b ("drm/amd/display: Fetch the EDID from _DDC if
available for eDP") added function dm_helpers_probe_acpi_edid(), which
fetches the EDID from the BIOS by calling acpi_video_get_edid().
acpi_video_get_edid() returns a pointer to the EDID, but this pointer
does not originate from kmalloc() - it is actually the internal
"pointer" field from an acpi_buffer struct (which did come from
kmalloc()).
dm_helpers_probe_acpi_edid() then attempts to kfree() the EDID pointer,
resulting in memory corruption which leads to random, intermittent
crashes (e.g. 4% of boots will fail with some Oops).
Fix this by allocating a new array (which can be safely freed) for the
EDID data, and correctly freeing the acpi_buffer pointer.
The only other caller of acpi_video_get_edid() is nouveau_acpi_edid():
remove the extraneous kmemdup() here as the EDID data is now copied in
acpi_video_device_EDID().
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Fixes: c6a837088b ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Closes: https://lore.kernel.org/amd-gfx/20250110175252.GBZ4FedNKqmBRaY4T3@fat_crate.local/T/#m324a23eb4c4c32fa7e89e31f8ba96c781e496fb1
Link: https://patch.msgid.link/Z4K_oQL7eA9Owkbs@debian.local
[ rjw: Changed function description comment into a kerneldoc one ]
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[Why]
Replay and PSR will cause some video corruption while VRR is enabled.
[How]
1. Disable the Replay and PSR while VRR is enabled.
2. Change the amdgpu_dm_crtc_vrr_active() parameter to const.
Because the function will only read data from dm_crtc_state.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d7879340e9)
Cc: stable@vger.kernel.org
[Why]
The enum DC_PSR_VERSION_SU_1 of psr_version is 1 and
DC_PSR_VERSION_UNSUPPORTED is 0xFFFFFFFF.
The original code may has chance trigger the amdgpu_dm_psr_enable()
while psr version is set to DC_PSR_VERSION_UNSUPPORTED.
[How]
Modify the condition to psr->psr_version == DC_PSR_VERSION_SU_1
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f765e7ce04)
Cc: stable@vger.kernel.org
Make sure the user supplied offset[] for the clear color plane
fits within the actual BO. Note that we use tile units to track
the size here. All the other color/aux planes are already
being checked correctly.
Cc: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Cc: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We're currently failing to provide any debug output when the
user passes in a misaligned offset for the clear color plane.
Add some debugs prints to make debugging actually possible.
Cc: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Cc: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Mesa changed its clear color alignment from 4k to 64 bytes
without informing the kernel side about the change. This
is now likely to cause framebuffer creation to fail.
The only thing we do with the clear color buffer in i915 is:
1. map a single page
2. read out bytes 16-23 from said page
3. unmap the page
So the only requirement we really have is that those 8 bytes
are all contained within one page. Thus we can deal with the
Mesa regression by reducing the alignment requiment from 4k
to the same 64 bytes in the kernel. We could even go as low as
32 bytes, but IIRC 64 bytes is the hardware requirement on
the 3D engine side so matching that seems sensible.
Note that the Mesa alignment chages were partially undone
so the regression itself was already fixed on userspace
side.
Cc: stable@vger.kernel.org
Cc: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13057
Closes: https://lore.kernel.org/all/45a5bba8de009347262d86a4acb27169d9ae0d9f.camel@xry111.site/
Link: 17f97a69c1
Link: 888f63cf1b
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-2-ville.syrjala@linux.intel.com
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The Balancer and DCC strategies were left off on a fear that
these strategies would conflict with the i915's waitboost.
However, on MTL and Beyond these strategies are only active in
certain conditions where the system is TDP limited.
So, they don't conflict, but help the
waitboost by guaranteeing a bit more of GT frequency.
Without these strategies we were likely leaving some performance
behind on some scenarios.
With this change in place, the enabling/disabling of DCC and Balancer
will now be chosen by GuC, on a platform/GT basis.
v2: - Fix typos and be clear on GuC decision on platform basis (Vinay)
- Limit change to MTL and beyond, where GuC started to take
TDP limit into consideration.
v3: Fix compilation. Actually amend the changes...
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110144640.1032250-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We have a few reports of sc7180-trogdor-pompom devices that have a
panel in them that IDs as STA 0x0004 and has the following raw EDID:
00 ff ff ff ff ff ff 00 4e 81 04 00 00 00 00 00
10 20 01 04 a5 1a 0e 78 0a dc dd 96 5b 5b 91 28
1f 52 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 8e 1c 56 a0 50 00 1e 30 28 20
55 00 00 90 10 00 00 18 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe
00 31 31 36 4b 48 44 30 32 34 30 30 36 0a 00 e6
We've been unable to locate a datasheet for this panel and our partner
has not been responsive, but all Starry eDP datasheets that we can
find agree on the same timing (delay_100_500_e200) so it should be
safe to use that here instead of the super conservative timings. We'll
still go a little extra conservative and allow `hpd_absent` of 200
instead of 100 because that won't add any real-world delay in most
cases.
We'll associate the string from the EDID ("116KHD024006") with this
panel. Given that the ID is the suspicious value of 0x0004 it seems
likely that Starry doesn't always update their IDs but the string will
still work to differentiate if we ever need to in the future.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109142853.1.Ibcc3009933fd19507cc9c713ad0c99c7a9e4fe17@changeid
The last use of intel_gvt_in_force_nonpriv_whitelist() was
removed in 2020 by
commit 02dd2b12a6 ("drm/i915/gvt: unify lri cmd handler and mmio
handlers")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Zhenyu Wang <zhenyuw.linux@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241222002043.173080-4-linux@treblig.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
intel_vgpu_decode_sprite_plane() was added in 2017 by
commit 9f31d1063b ("drm/i915/gvt: Add framebuffer decoder support")
but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Zhenyu Wang <zhenyuw.linux@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241222002043.173080-3-linux@treblig.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
intel_gvt_ggtt_h2g_index() and intel_gvt_ggtt_index_g2h() were
added in 2016 by
commit 2707e44466 ("drm/i915/gvt: vGPU graphics memory virtualization")
but haven't been used.
Remove them.
They were the only users of intel_gvt_ggtt_gmadr_g2h() and
intel_gvt_ggtt_gmadr_h2g().
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Zhenyu Wang <zhenyuw.linux@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241222002043.173080-2-linux@treblig.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Changes the xinpeng-xpp055c272 panel to use multi style functions for
improved error handling.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107092510.174089-1-tejasvipin76@gmail.com
Changes the ebbg-ft8719 panel to use multi style functions for
improved error handling.
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106041129.114867-1-tejasvipin76@gmail.com
The fence sync logic doesn't handle a fence sync across devices
as it tries to write to a channel offset from one device into
the fence bo from a different device, which won't work so well.
This patch fixes that to avoid using the sync path in the case
where the fences come from different nouveau drm devices.
This works fine on a single device as the fence bo is shared
across the devices, and mapped into each channels vma space,
the channel offsets are therefore okay to pass between sides,
so one channel can sync on the seqnos from the other by using
the offset into it's vma.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
[ Fix compilation issue; remove version log from commit messsage.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109005553.623947-1-airlied@gmail.com
Simplify the pool allocation code somewhat by merging loop arguments
used by multiple functions together in a struct and simplifying the
loop. Also add documentation.
This hopefully makes the behaviour of the allocation loop
simplier to understand, but above all paves the way for upcoming
restore-while-allocating functionality.
There are no functional changes, but the "allow_pools" bool
introduced to keep current functionality could be removed as a
follow up, which would enable using write-back cached pools when
allocating memory for other caching modes, rather than to resort
to allocating from the system directly.
v15:
- Introduce this patch to simplify the upcoming patch that introduces
restore while allocating.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217145852.37342-4-thomas.hellstrom@linux.intel.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Make the interface more symmetric by providing and using a
ttm_resource_cursor_init().
v10:
- Fix a stray newline (Matthew Brost)
- Update kerneldoc (Matthew Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217145852.37342-2-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>