As per the RZ/G2UL hardware manual Table 33.4 Clock List, the maximum
dot clock for the DPI interface is 83.5 MHz. Add mode_valid callback
to reject modes greater than 83.5 MHz.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022082433.32513-3-biju.das.jz@bp.renesas.com
The DPI_OE bit is removed from the latest RZ/G2UL and RZ/G2L hardware
manual. So, drop this macro.
Fixes: b330f14801 ("drm: renesas: rz-du: Add RZ/G2UL DU Support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022082433.32513-2-biju.das.jz@bp.renesas.com
Add a little bit of documentation around DP MST. This is nowhere near
complete nor does it have enough detail. But it's better than nothing,
and hopefully gives people a basic grasp of what's going on.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241125151933.2382910-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The 'select FB_CORE' statement moved from CONFIG_DRM to DRM_CLIENT_LIB,
but there are now configurations that have code calling into fb_core
as built-in even though the client_lib itself is a loadable module:
x86_64-linux-ld: drivers/gpu/drm/drm_fbdev_shmem.o: in function `drm_fbdev_shmem_driver_fbdev_probe':
drm_fbdev_shmem.c:(.text+0x1fc): undefined reference to `fb_deferred_io_init'
x86_64-linux-ld: drivers/gpu/drm/drm_fbdev_shmem.o: in function `drm_fbdev_shmem_fb_destroy':
drm_fbdev_shmem.c:(.text+0x2e1): undefined reference to `fb_deferred_io_cleanup'
In addition to DRM_CLIENT_LIB, the 'select' needs to be at least in
two more parts, DRM_KMS_HELPER and DRM_GEM_SHMEM_HELPER, so add those
here.
v3:
- Remove FB_CORE from DRM_KMS_HELPER to avoid circular dependency
Fixes: dadd28d414 ("drm/client: Add client-lib module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241115162323.3555229-1-arnd@kernel.org
Introduce it6263_is_input_bus_fmt_valid() and refactor the
it6263_bridge_atomic_get_input_bus_fmts() function to support VESA-24
format by selecting the LVDS input format based on the LVDS data mapping
and thereby support both JEIDA-24 and VESA-24 input formats.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241205080210.1285385-1-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Clippy in the upcoming Rust 1.83.0 spots a spurious empty line since the
`clippy::empty_line_after_doc_comments` warning is now enabled by default
given it is part of the `suspicious` group [1]:
error: empty line after doc comment
--> drivers/gpu/drm/drm_panic_qr.rs:931:1
|
931 | / /// They must remain valid for the duration of the function call.
932 | |
| |_
933 | #[no_mangle]
934 | / pub unsafe extern "C" fn drm_panic_qr_generate(
935 | | url: *const i8,
936 | | data: *mut u8,
937 | | data_len: usize,
... |
940 | | tmp_size: usize,
941 | | ) -> u8 {
| |_______- the comment documents this function
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#empty_line_after_doc_comments
= note: `-D clippy::empty-line-after-doc-comments` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::empty_line_after_doc_comments)]`
= help: if the empty line is unintentional remove it
Thus remove the empty line.
Cc: stable@vger.kernel.org
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Link: https://github.com/rust-lang/rust-clippy/pull/13091 [1]
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241125233332.697497-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Catch up with -rc2 and fixing namespace conflict issue caused by
commit cdd30ebb1b ("module: Convert symbol namespace to string literal")
and commit 0c45e76fcc ("drm/xe/vsec: Support BMG devices")
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The debugfs contains all the other timings except panel power cycle
delay. Add it for completeness.
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241205123720.3278727-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
DSB LUT register writes vs. palette anti-collision logic
appear to interact in interesting ways:
- posted DSB writes simply vanish into thin air while
anti-collision is active
- non-posted DSB writes actually get blocked by the anti-collision
logic, but unfortunately this ends up hogging the bus for
long enough that unrelated parallel CPU MMIO accesses start
to disappear instead
Even though we are updating the LUT during vblank we aren't
immune to the anti-collision logic because it kicks in briefly
for pipe prefill (initiated at frame start). The safe time
window for performing the LUT update is thus between the
undelayed vblank and frame start. Turns out that with low
enough CDCLK frequency (DSB execution speed depends on CDCLK)
we can exceed that.
As we are currently using non-posted writes for the legacy LUT
updates, in which case we can hit the far more severe failure
mode. The problem is exacerbated by the fact that non-posted
writes are much slower than posted writes (~4x it seems).
To mititage the problem let's switch to using posted DSB
writes for legacy LUT updates (which will involve using the
double write approach to avoid other problems with DSB
vs. legacy LUT writes). Despite writing each register twice
this will in fact make the legacy LUT update faster when
compared to the non-posted write approach, making the
problem less likely to appear. The failure mode is also
less severe.
This isn't the 100% solution we need though. That will involve
estimating how long the LUT update will take, and pushing
frame start and/or delayed vblank forward to guarantee that
the update will have finished by the time the pipe prefill
starts...
Cc: stable@vger.kernel.org
Fixes: 34d8311f4a ("drm/i915/dsb: Re-instate DSB for LUT updates")
Fixes: 25ea3411bd ("drm/i915/dsb: Use non-posted register writes for legacy LUT")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12494
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241120164123.12706-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit 2504a316b3)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Turns out the DSB indexed register write command has
rather significant initial overhead compared to the normal
MMIO write command. Based on some quick experiments on TGL
you have to write the register at least ~5 times for the
indexed write command to come out ahead. If you write the
register less times than that the MMIO write is faster.
So it seems my automagic indexed write logic was a bit
misguided. Go back to the original approach only use
indexed writes for the cases we know will benefit from
it (indexed LUT register updates).
Currently we shouldn't have any cases where this truly
matters (just some rare double writes to the precision
LUT index registers), but we will need to switch the
legacy LUT updates to write each LUT register twice (to
avoid some palette anti-collision logic troubles).
This would be close to the worst case for using indexed
writes (two writes per register, and 256 separate registers).
Using the MMIO write command should shave off around 30%
of the execution time compared to using the indexed write
command.
Cc: stable@vger.kernel.org
Fixes: 34d8311f4a ("drm/i915/dsb: Re-instate DSB for LUT updates")
Fixes: 25ea3411bd ("drm/i915/dsb: Use non-posted register writes for legacy LUT")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241120164123.12706-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit ecba559a88)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Going forward, struct intel_display will be the main display driver
structure. Convert the main display entry points to struct
intel_display.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204102150.2223455-1-jani.nikula@intel.com
Ensure the clear operation completes before proceeding, as the clear
fence is not attached to the BO's dma-resv object.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241205114702.1963303-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
- amdgu: mostly display fixes + jpeg vcn 1.0, sriov, dcn4.0 resume
firxes
- amdkfd fixes
-----BEGIN PGP SIGNATURE-----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=7EBF
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-12-06' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Simona Vetter:
"Due to mailing list unreliability we missed the amdgpu pull, hence
part two with that now included:
- amdgu: mostly display fixes + jpeg vcn 1.0, sriov, dcn4.0 resume
fixes
- amdkfd fixes"
* tag 'drm-fixes-2024-12-06' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu: rework resume handling for display (v2)
drm/amd/pm: fix and simplify workload handling
Revert "drm/amd/pm: correct the workload setting"
drm/amdgpu: fix sriov reinit late orders
drm/amdgpu: Fix ISP hw init issue
drm/amd/display: Add hblank borrowing support
drm/amd/display: Limit VTotal range to max hw cap minus fp
drm/amd/display: Correct prefetch calculation
drm/amd/display: Add option to retrieve detile buffer size
drm/amd/display: Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
drm/amdkfd: hard-code cacheline for gc943,gc944
drm/amdkfd: add MEC version that supports no PCIe atomics for GFX12
drm/amd/display: Fix programming backlight on OLED panels
drm/amd: Sanity check the ACPI EDID
drm/amdgpu/hdp7.0: do a posting read when flushing HDP
drm/amdgpu/hdp6.0: do a posting read when flushing HDP
drm/amdgpu/hdp5.2: do a posting read when flushing HDP
drm/amdgpu/hdp5.0: do a posting read when flushing HDP
drm/amdgpu/hdp4.0: do a posting read when flushing HDP
drm/amdgpu/jpeg1.0: fix idle work handler
dma-fence:
- Fix reference leak on fence-merge failure path
- Simplify fence merging with kernel's sort()
- Fix dma_fence_array_signaled() to ensure forward progress
dp_mst:
- Fix MST sideband message body length check
- Fix a bunch of locking/state handling with DP MST msgs
sti:
- Add __iomem for mixer_dbg_mxn()'s parameter
xe:
- Missing init value and 64-bit write-order check
- Fix a memory allocation issue causing lockdep violation
v3d:
- performance counter fix.
-----BEGIN PGP SIGNATURE-----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=NMaJ
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Pretty quiet week which is probably expected after US holidays, the
dma-fence and displayport MST message handling fixes make up the bulk
of this, along with a couple of minor xe and other driver fixes.
dma-fence:
- Fix reference leak on fence-merge failure path
- Simplify fence merging with kernel's sort()
- Fix dma_fence_array_signaled() to ensure forward progress
dp_mst:
- Fix MST sideband message body length check
- Fix a bunch of locking/state handling with DP MST msgs
sti:
- Add __iomem for mixer_dbg_mxn()'s parameter
xe:
- Missing init value and 64-bit write-order check
- Fix a memory allocation issue causing lockdep violation
v3d:
- Performance counter fix"
* tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel:
drm/v3d: Enable Performance Counters before clearing them
drm/dp_mst: Use reset_msg_rx_state() instead of open coding it
drm/dp_mst: Reset message rx state after OOM in drm_dp_mst_handle_up_req()
drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()
drm/dp_mst: Fix down request message timeout handling
drm/dp_mst: Simplify error path in drm_dp_mst_handle_down_rep()
drm/dp_mst: Verify request type in the corresponding down message reply
drm/dp_mst: Fix resetting msg rx state after topology removal
drm/xe: Move the coredump registration to the worker thread
drm/xe/guc: Fix missing init value and add register order check
drm/sti: Add __iomem for mixer_dbg_mxn's parameter
drm/dp_mst: Fix MST sideband message body length check
dma-buf: fix dma_fence_array_signaled v4
dma-fence: Use kernel's sort for merging fences
dma-fence: Fix reference leak on fence merge failure path
BO validation during vm_bind could trigger memory eviction when
system runs under memory pressure. Right now we blindly evict
BOs of all VMs. This scheme has a problem when system runs in
none recoverable page fault mode: even though the vm_bind could
be successful by evicting BOs, the later the rebinding of the
evicted BOs would fail. So it is better to report an out-of-
memory failure at vm_bind time than at time of rebinding where
xekmd currently doesn't have a good mechanism to report error
to user space.
This patch implemented a scheme to only evict objects of other
VMs during vm_bind time. Object of the same VM will skip eviction.
If we failed to find enough memory for vm_bind, we report error
to user space at vm_bind time.
This scheme is not needed for recoverable page fault mode under
what we can dynamically fault-in pages on demand.
v1: Use xe_vm_in_preempt_fence_mode instead of stack variable (Thomas)
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203021929.1919730-1-oak.zeng@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add delays to allow frequency stabilization before power measurement
to fix sporadic power conservation issues in live_rps_power test.
v2:
- Move delay to respective function (Badal)
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203061114.2790448-1-sk.anirban@intel.com
drm_panel_init() was made to initialize the fields in |struct drm_panel|.
There is no need to separately initialize them again.
Drop the separate assignments that are redundant. Also fix up any uses
of `ctx->panel.dev` to use `dev` directly.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204093942.1374693-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
The state dump on a dead CT incident deliberately disarms itself after
running. This is to prevent a long stream of errors causing continuous
dumps. It was supposed to re-arm itself after a reset, however that
was not happening. The re-arm flag was being set but the worker was
not being run to process that flag. So fix that.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203005949.3947920-1-John.C.Harrison@Intel.com
Set the default workload type to bootup type on smu v13.0.7.
This is because of the constraint on smu v13.0.7.
Gfx activity has an even higher set point on 3D fullscreen
mode than the one on bootup mode. This causes the 3D fullscreen
mode's performance is worse than the bootup mode's performance
for the lightweighted/medium workload. For the high workload,
the performance is the same between 3D fullscreen mode and bootup
mode.
v2: set the default workload in ASIC specific file
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Refactor such that individual SMU IP versions can choose the startup
power profile mode. If no preference, then use the generic default power
profile selection logic.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
base.sched may not be set for each instance and should not
be used for cases such as non-IB tests.
Fixes: 2320c9e6a7 ("drm/sched: memset() 'job' in drm_sched_job_init()")
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When starting the mpv player, Radeon R9 users are observing
the below error in dmesg.
[drm:amdgpu_uvd_cs_pass2 [amdgpu]]
*ERROR* msg/fb buffer ff00f7c000-ff00f7e000 out of 256MB segment!
The patch tries to set the TTM_PL_FLAG_CONTIGUOUS for both user
flag(AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS) set and not set cases.
v2: Make the TTM_PL_FLAG_CONTIGUOUS mandatory for user BO's.
v3: revert back to v1, but fix the check instead (chk).
Closes:https://gitlab.freedesktop.org/drm/amd/-/issues/3599
Closes:https://gitlab.freedesktop.org/drm/amd/-/issues/3501
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.10+
Use second jump table in sriov for live migration or mulitple VF
support so different VF can load different version of MEC as long
as they support sjt
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 274e3f4596.
Additional review comments to address. Will resubmit.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On the Raspberry Pi 5, performance counters are not being cleared
when `v3d_perfmon_start()` is called, even though we write to the
CLR register. As a result, their values accumulate until they
overflow.
The expected behavior is for performance counters to reset to zero
at the start of a job. When the job finishes and the perfmon is
stopped, the counters should accurately reflect the values for that
specific job.
To ensure this behavior, the performance counters are now enabled
before being cleared. This allows the CLR register to function as
intended, zeroing the counter values when the job begins.
Fixes: 26a4dc29b7 ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204122831.17015-1-mcanal@igalia.com
When probe has an error, the current scheme causes a page fault during
resource unwinding. This happens because GTTMMADR_BAR gets unmapped
before the allocated BO is released via drmm. Switching to a managed BO
that is released via devm solves this ordering issue.
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204111655.1293-1-ilia.levi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
After an out-of-memory error the reception state should be reset, so
that the next attempt receiving a message doesn't fail (due to getting a
start-of-message packet, while the reception state has already the
start-of-message flag set).
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-7-imre.deak@intel.com
While receiving an MST up request message from one thread in
drm_dp_mst_handle_up_req(), the MST topology could be removed from
another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing
mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL.
This could lead to a NULL deref/use-after-free of mst_primary in
drm_dp_mst_handle_up_req().
Avoid the above by holding a reference for mst_primary in
drm_dp_mst_handle_up_req() while it's used.
v2: Fix kfreeing the request if getting an mst_primary reference fails.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204132007.3132494-1-imre.deak@intel.com
If receiving a reply for an MST down request message times out, the
thread receiving the reply in drm_dp_mst_handle_down_rep() could try to
dereference the drm_dp_sideband_msg_tx txmsg request message after the
thread waiting for the reply - calling drm_dp_mst_wait_tx_reply() - has
timed out and freed txmsg, hence leading to a use-after-free in
drm_dp_mst_handle_down_rep().
Prevent the above by holding the drm_dp_mst_topology_mgr::qlock in
drm_dp_mst_handle_down_rep() for the whole duration txmsg is looked up
from the request list and dereferenced.
v2: Fix unlocking mgr->qlock after verify_rx_request_type() fails.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203174632.2941402-1-imre.deak@intel.com
Simplify the error return path in drm_dp_mst_handle_down_rep(),
preparing for the next patch.
While at it use reset_msg_rx_state() instead of open-coding it.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-4-imre.deak@intel.com
After receiving the response for an MST down request message, the
response should be accepted/parsed only if the response type matches
that of the request. Ensure this by checking if the request type code
stored both in the request and the reply match, dropping the reply in
case of a mismatch.
This fixes the topology detection for an MST hub, as described in the
Closes link below, where the hub sends an incorrect reply message after
a CLEAR_PAYLOAD_TABLE -> LINK_ADDRESS down request message sequence.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12804
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-3-imre.deak@intel.com
If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 1d082618bb ("drm/display/dp_mst: Fix down/up message handling after sink disconnect")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13056
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-2-imre.deak@intel.com
Commit 255fc1703e ("drm/i915/gem: Calculate object page offset for
partial memory mapping") introduced a new offset, which accounts for
userspace mapping not starting from the beginning of object's scatterlist.
This works fine for cases where first object pte is larger than the new
offset - "r->sgt.curr" counter is set to the offset to match the difference
in the number of total pages. However, if object's first pte's size is
equal to or smaller than the offset, then information about the offset
in userspace is covered up by moving "r->sgt" pointer in remap_sg():
r->sgt.curr += PAGE_SIZE;
if (r->sgt.curr >= r->sgt.max)
r->sgt = __sgt_iter(__sg_next(r->sgt.sgp), use_dma(r->iobase));
This means that two or more pages from virtual memory are counted for
only one page in object's memory, because after moving "r->sgt" pointer
"r->sgt.curr" will be 0.
We should account for this mismatch by moving "r->sgt" pointer to the
next pte. For that we may use "r.sgt.max", which already holds the max
allowed size. This change also eliminates possible confusion, when
looking at i915_scatterlist.h and remap_io_sg() code: former has
scatterlist pointer definition, which differentiates "s.max" value
based on "dma" flag (sg_dma_len() is used only when the flag is
enabled), while latter uses sg_dma_len() indiscriminately.
This patch aims to resolve issue:
https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12031
v3:
- instead of checking if r.sgt.curr would exceed allowed max, changed
the value in the while loop to be aligned with `dma` value
v4:
- remove unnecessary parent relation
v5:
- update commit message with explanation about page counting mismatch
and link to the issue
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/upbjdavlbcxku63ns4vstp5kgbn2anxwewpmnppszgb67fn66t@tfclfgkqijue
Replace sun4i_hdmi_connector_atomic_check(), which performs just TMDS
char rate check, with drm_atomic_helper_connector_hdmi_check(), which
performs additional checks basing on the HDMI Connector's state.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-10-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Replace .mode_valid() callback with .hdmi_tmds_char_rate_valid(). It is
more generic and is used in other mode validation paths. The rate
validation for .mode_valid() will be performed by the
drm_bridge_connector code.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-9-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>