Use new drm_bridge_connector_mode_valid() helper if there is a HDMI
bridge in the bridge chain. This removes the need to perform TMDS char
rate check manually in the bridge driver.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-7-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The set_connector_edid() function returns a bogus 0, performing the
check on the connector->funcs->fill_modes() result internally. Make the
function pass the fill_modes()'s return value to the caller and move
corresponding checks to the caller site.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-3-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
As pointed out by Maxime, the drm_atomic_helper_connector_hdmi_init()
isn't a good name for a function inside KUnit tests. Rename it to
drm_kunit_helper_connector_hdmi_init().
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-2-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
We stopped using the driver initialized date in commit 7fb8af6798
("drm: deprecate driver date") and (eventually) started returning "0"
for drm_version ioctl instead.
Finish the job, and remove the unused date member from struct
drm_driver, its initialization from drivers, along with the common
DRIVER_DATE macros.
v2: Also update drivers/accel (kernel test robot)
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm_dev_register() already prints the same information on successful
init. Remove the redundant prints.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/900b3836c80a23923ede034ab10eb344be1e35bd.1733322525.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Refactor program_dpkgc function so that all initialized variables
of same type are clubbed together.
--v2
-Modify commit message to reflect what is being done in patch [Mitul]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203084706.2126189-6-suraj.kandpal@intel.com
Increase the latency programmed into PKG_C_LATENCY latency to be
a multiple of line time which is written into WM_LINETIME.
--v2
-Fix commit subject line [Sai Teja]
-Use individual DISPLAY_VER checks instead of range [Sai Teja]
-Initialize max_linetime [Sai Teja]
--v3
-take into account the scenario when adjusted_latency is 0 [Vinod]
--v4
-rename adjusted_latency to latency [Mitul]
-fix the condition in which dpkgc is disabled [Vinod]
--v5
-Add check to see if max_linetime is 0 [Vinod]
--v6
-Avoid nested if statements [Mitul]
WA: 22020299601
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203084706.2126189-5-suraj.kandpal@intel.com
Refactor the code to check the fixed refresh rate condition in the dpkgc
function itself and call it from intel_atomic_commit_tail so that we
have all the required values specially linetime which is computed after
intel_wm_compute, this will also help implement some WA's which requires
linetime. This also avoid writing into any of the registers while we are
in compute_config phase.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203084706.2126189-4-suraj.kandpal@intel.com
Use intel_display for DPKGC code wherever we can. While we are
at it also use intel_de_rmw instead of intel_uncore_rmw as we
really don't need the internal uncore_rmw_function.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203084706.2126189-3-suraj.kandpal@intel.com
Refactor the value getting prepped to be written into the PKG_C_LATENCY
register by ORing the REG_FIELD_PREP values instead of having val
getting operated on twice.
We dont need the clear and val variables to be initialized.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203084706.2126189-2-suraj.kandpal@intel.com
Initialize max_latency variable to LNL_PKG_C_LATENCY_MASK which helps
to eliminate the else block and make the whole code a lot cleaner.
--v2
-Seprate patch to club variables together [Mitul]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203084706.2126189-1-suraj.kandpal@intel.com
The LOGINIT, LOGINTR, LOGRM, and LOGPMU buffers are circular buffers
that have printf-like logs from GSP-RM and PMU encoded in them.
LOGINIT, LOGINTR, and LOGRM are allocated by Nouveau and their DMA
addresses are passed to GSP-RM during initialization. The buffers are
required for GSP-RM to initialize properly.
LOGPMU is also allocated by Nouveau, but its contents are updated
when Nouveau receives an NV_VGPU_MSG_EVENT_UCODE_LIBOS_PRINT RPC from
GSP-RM. Nouveau then copies the RPC to the buffer.
The messages are encoded as an array of variable-length structures that
contain the parameters to an NV_PRINTF call. The format string and
parameter count are stored in a special ELF image that contains only
logging strings. This image is not currently shipped with the Nvidia
driver.
There are two methods to extract the logs.
OpenRM tries to load the logging ELF, and if present, parses the log
buffers in real time and outputs the strings to the kernel console.
Alternatively, and this is the method used by this patch, the buffers
can be exposed to user space, and a user-space tool (along with the
logging ELF image) can parse the buffer and dump the logs.
This method has the advantage that it allows the buffers to be parsed
even when the logging ELF file is not available to the user. However,
it has the disadvantage the debugfs entries need to remain until the
driver is unloaded.
The buffers are exposed via debugfs. If GSP-RM fails to initialize, then
Nouveau immediately shuts down the GSP interface. This would normally
also deallocate the logging buffers, thereby preventing the user from
capturing the debug logs.
To avoid this, introduce the keep-gsp-logging command line parameter. If
specified, and if at least one logging buffer has content, then Nouveau
will migrate these buffers into new debugfs entries that are retained
until the driver unloads.
An end-user can capture the logs using the following commands:
cp /sys/kernel/debug/nouveau/<path>/loginit loginit
cp /sys/kernel/debug/nouveau/<path>/logrm logrm
cp /sys/kernel/debug/nouveau/<path>/logintr logintr
cp /sys/kernel/debug/nouveau/<path>/logpmu logpmu
where (for a PCI device) <path> is the PCI ID of the GPU (e.g.
0000:65:00.0).
Since LOGPMU is not needed for normal GSP-RM operation, it is only
created if debugfs is available. Otherwise, the
NV_VGPU_MSG_EVENT_UCODE_LIBOS_PRINT RPCs are ignored.
A simple way to test the buffer migration feature is to have
nvkm_gsp_init() return an error code.
Tested-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030202952.694055-2-ttabi@nvidia.com
Store the struct device pointer used to allocate the DMA buffer in
the nvkm_gsp_mem object. This allows nvkm_gsp_mem_dtor() to release
the buffer without needing the nvkm_gsp. This is needed so that
we can retain DMA buffers even after the nvkm_gsp object is deleted.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030202952.694055-1-ttabi@nvidia.com
Typically DRM drivers use the DRM debugfs root entry. However, since
Nouveau is heading towards a split into a core and a DRM driver, create
a module specific debugfs root directory.
Subsequent patches make use of this new debugfs root in order to store
GSP-RM log bufferes (optionally beyond a device driver binding).
Acked-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241125142639.9126-1-dakr@kernel.org
Let's start using struct intel_display instead of struct drm_i915_private
when introducing new code. No functional changes.
v2: Drop tc_to_intel_display() helper function (Jani)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127073200.124907-3-mika.kahola@intel.com
There is a HW issue that arises when there are race conditions
between TCSS entering/exiting TC7 or TC10 states while the
driver is asserting/deasserting TCSS power request. As a
workaround, Display driver will implement a mailbox sequence
to ensure that the TCSS is in TC0 when TCSS power request is
asserted/deasserted.
The sequence is the following
1. Read mailbox command status and wait until run/busy bit is
clear
2. Write mailbox data value '1' for power request asserting
and '0' for power request deasserting
3. Write mailbox command run/busy bit and command value with 0x1
4. Read mailbox command and wait until run/busy bit is clear
before continuing power request.
v2: Rename WA function (Gustavo)
Limit WA only for PTL platform with a TODO note (Gustavo)
Add TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY for clarity when writing
register data (Gustavo)
Move register defs from i915_reg.h to intel_cx0_phy_regs.h (Gustavo)
v3: Use "struct intel_display" instead of "struct drm_i915_private" (Jani)
Move defs above C10 definitions in the
intel_cx0_phy_regs.h file (Gustavo)
Move drm_WARN_ON() inside WA function (Gustavo)
Rename workaround function as wa_14020908590() (Gustvo)
Use boolean enable instead of if-else structure (Raag)
v4: Drop drm_WARN_ON() (Raag)
Fix function definition to fit into a single line (Raag)
v5: Drop TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY from TCSS_DISP_MAILBOX_IN_CMD_DATA(val)
macro (Jani)
Rename WA function with some meaningful name and add comment
on WA number (Jani)
Use struct intel_display on WA calling function (Jani)
Reviewed-by: Raag Jadav <raag.jadav@intel.com> (v4)
Acked-by: Jani Nikula <jani.nikula@intel.com> (v5)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127073200.124907-2-mika.kahola@intel.com
Add a new ioctl, DRM_IOCTL_V3D_PERFMON_SET_GLOBAL, to allow
configuration of a global performance monitor (perfmon).
Use the global perfmon for all jobs to ensure consistent
performance tracking across submissions. This feature is
needed to implement a Perfetto datasources in user-space.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202140615.74802-1-christian.gmeiner@gmail.com
ttm_bo_access() returns the size on success, account for that otherwise
the caller incorrectly thinks this is an error in
intel_atomic_prepare_plane_clear_colors().
v2 (Thomas)
- Make sure we check for the partial copy case. Also since this api is
easy to get wrong, wrap the whole thing in a new helper to hide the
details and then convert the existing users over.
Fixes: b6308aaa24 ("drm/xe/display: Update intel_bo_read_from_page to use ttm_bo_access")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3661
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202170102.88893-2-matthew.auld@intel.com
The PHY is either c10 or c20, there's no need to check at runtime and
complicate the conditions in mtl_get_cx0_buf_trans().
While at it, replace the direct port clock check with
intel_dp_is_uhbr().
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129114158.486418-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Split resume into a 3rd step to handle displays when DCC is
enabled on DCN 4.0.1. Move display after the buffer funcs
have been re-enabled so that the GPU will do the move and
properly set the DCC metadata for DCN.
v2: fix fence irq resume ordering
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
The IRQ indexes for the intf_6 underrun/vsync interrupts are swapped.
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16) is the actual underrun interrupt and
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17) is the vsync interrupt.
This causes timeout errors when using the DP2 controller, e.g.
[dpu error]enc37 frame done timeout
*ERROR* irq timeout id=37, intf_mode=INTF_MODE_VIDEO intf=6 wb=-1, pp=2, intr=0
*ERROR* wait disable failed: id:37 intf:6 ret:-110
Correct them to fix these errors and make DP2 work properly.
Cc: stable@vger.kernel.org
Fixes: e3b1f369db ("drm/msm/dpu: Add X1E80100 support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/624681/
Link: https://lore.kernel.org/r/20241115-x1e80100-dp2-fix-v1-1-727b9fe6f390@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
When performing a guc_mmio_regset_write, we add all the registers in the
reg_sr list to the save/restore list, but do not do the same for the
nonpriv registers. Add them in.
v2:
- Add all NONPRIV registers to avoid undefined behavior (Harrison)
- s/whitelist/nonpriv
v3:
- Rebase
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2249
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
CC: Lucas de Marchi <lucas.demarchi@intel.com>
CC: Matt Roper <matthew.d.roper@intel.com>
CC: John Harrison <john.c.harrison@intel.com>
CC: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
CC: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241122180826.7075-1-jonathan.cavitt@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The Battlemage (BMG) discrete graphics card supports the Platform,
Monitoring Technology (PMT) feature directly on the primary PCI device.
Utilize the PMT callback API to add support for the BMG devices.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203153639.2982162-1-michael.j.ruhl@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
SST with 128b/132b channel coding needs this too. Extract to a separate
helper, independent of MST.
Pass timeout in as a parameter, anticipating that we can reduce the
timeout for SST.
v2: Clean up kernel-doc a bit
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/459fd3e96a55a8ea8ada8d27d93eaa24c235f9c1.1733238941.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use the new helper to export stats about memory usage.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Alignment checking is only needed to be done in the upper caller function.
If those address and sizes are able to pass the check, it will certainly
pass the same test in the etnaviv_context_unmap() function. We don't need
examine it more than once.
Remove redundant alignment tests, move the those useless to upper caller
function.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The value of the 'iova' variable is the start GPUVA that is going to be
mapped, its value doesn't changed when the mapping is on going.
Replace it with the 'da' variable, which is incremental and it reflects
the actual address being mapped exactly.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The etnaviv driver, both kernel space and user space, assumes that GPU page
size is 4KiB. Its IOMMU map/unmap 4KiB physical address range once a time.
If 'sg->offset != 0' is true, then the current implementation will map the
IOVA to a wrong area, which may lead to coherency problem. Picture 0 and 1
give the illustration, see below.
PA start drifted
|
|<--- 'sg_dma_address(sg) - sg->offset'
| .------ sg_dma_address(sg)
| | .---- sg_dma_len(sg)
|<-sg->offset->| |
V |<-->| Another one cpu page
+----+----+----+----+ +----+----+----+----+
|xxxx| |||||| |||||||||||||||||||||
+----+----+----+----+ +----+----+----+----+
^ ^ ^ ^
|<--- da_len --->| | |
| | | |
| .--------------' | |
| | .----------------' |
| | | .----------------'
| | | |
| | +----+----+----+----+
| | |||||||||||||||||||||
| | +----+----+----+----+
| |
| '--------------. da_len = sg_dma_len(sg) + sg->offset, using
| | 'sg_dma_len(sg) + sg->offset' will lead to GPUVA
+----+ ~~~~~~~~~~~~~+ collision, but min_t(unsigned int, da_len, va_len)
|xxxx| | will clamp it to correct size. But the IOVA will
+----+ ~~~~~~~~~~~~~+ be redirect to wrong area.
^
| Picture 0: Possibly wrong implementation.
GPUVA (IOVA)
--------------------------------------------------------------------------
.------- sg_dma_address(sg)
| .---- sg_dma_len(sg)
|<-sg->offset->| |
| |<-->| another one cpu page
+----+----+----+----+ +----+----+----+----+
| |||||| |||||||||||||||||||||
+----+----+----+----+ +----+----+----+----+
^ ^ ^ ^
| | | |
.--------------' | | |
| | | |
| .--------------' | |
| | .----------------' |
| | | .----------------'
| | | |
+----+ +----+----+----+----+
|||||| ||||||||||||||||||||| The first one is SZ_4K, the second is SZ_16K
+----+ +----+----+----+----+
^
| Picture 1: Perfectly correct implementation.
GPUVA (IOVA)
If sg->offset != 0 is true, IOVA will be mapped to wrong physical address.
Either because there doesn't contain the data or there contains wrong data.
Strictly speaking, the memory area that before sg_dma_address(sg) doesn't
belong to us, and it's likely that the area is being used by other process.
Because we don't want to introduce confusions about which part is visible
to the GPU, we assumes that the size of GPUVA is always 4KiB aligned. This
is very relaxed requirement, since we already made the decision that GPU
page size is 4KiB (as a canonical decision). And softpin feature is landed,
Mesa's util_vma_heap_alloc() will certainly report correct length of GPUVA
to kernel with desired alignment ensured.
With above statements agreed, drop the "offset in page" manipulation will
return us a correct implementation at any case.
Fixes: a8c21a5451 ("drm/etnaviv: add initial etnaviv DRM driver")
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
In the etnaviv_gem_vmap_impl() function, the driver vmap whatever buffers
with write combine(WC) page property, this is incorrect. Cached buffers
should be mapped with the cached page property and uncached buffers should
be mapped with the uncached page property.
Fixes: a0a5ab3e99 ("drm/etnaviv: call correct function when trying to vmap a DMABUF")
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The etnaviv_perfmon.h header is about performance monitor, it can hardly
has something to do with command buffer suballocator. Drop it.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Referencing the 'struct etnaviv_gpu *' by every etnaviv GEM BO is weird.
Drop it and drop yet another unused data field, namely 'access'.
Memory footprint of etnaviv GEM BOs reduced.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Remove the connector-status initialization from several of vmwgfx's
functions. It is not required by the driver or DRM helpers.
DRM initializes the connector to unknown status in __drm_connector_init()
and reads the physical status when DRM clients or the user needs the
information, or if it detects/polls a change to the status.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105132045.471856-1-tzimmermann@suse.de
Adding lockdep checking to the coredump code showed that there was an
existing violation. The dev_coredumpm_timeout() call is used to
register the dump with the base coredump subsystem. However, that
makes multiple memory allocations, only some of which use the GFP_
flags passed in. So that also needs to be deferred to the worker
function where it is safe to allocate with arbitrary flags.
In order to not add protoypes for the callback functions, moving the
_timeout call also means moving the worker thread function to later in
the file.
v2: Rebased after other changes to the worker function.
Fixes: e799485044 ("drm/xe: Introduce the dev_coredump infrastructure.")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: intel-xe@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-3-John.C.Harrison@Intel.com
(cherry picked from commit 90f51a7f4e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fix missing initial value for last_value.
For GuC capture register definition, it is required to define 64bit
register in a pair of 2 consecutive 32bit register entries, low first,
then hi. Add code to check this order.
Changes from prior revs:
v5:- Correct cross-line comment format
v4:- Fix warn on condition and remove skipping
v3:- Move break inside brace
v2:- Correct the fix tag pointed commit
Add examples in comments for warning
Add 1 missing hi condition check
Fixes: ecb6336463 ("drm/xe/guc: Plumb GuC-capture into dev coredump")
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241126201052.1937079-1-zhanjun.dong@intel.com
(cherry picked from commit 6f59fbcfa0)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
In pll_get_integloop_gain(), digclk_divsel=1 or 2, base=63 or 196ULL,
so the base may be 63, 126, 196, 392. The condition base <= 2046
always true.
Fixes: caedbf17c4 ("drm/msm: add msm8998 hdmi phy/pll support")
Signed-off-by: Rex Nie <rex.nie@jaguarmicro.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/624153/
Link: https://lore.kernel.org/r/20241112074101.2206-1-rex.nie@jaguarmicro.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
The msm_dp_utils_pack_sdp_header() accepts an unlimited-size u32 pointer
for the header output, while it expects a two-element array. It performs
a sizeof check which is always true on 64-bit platforms (since
sizeof(u32*) is 8) and is always false on 32-bit platforms. It returns
an error code which nobody actually checks.
Fix the function interface to accept u32[2] and return void, skipping
all the checks.
Fixes: 55fb8ffc18 ("drm/msm/dp: add VSC SDP support for YUV420 over DP")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/626806/
Link: https://lore.kernel.org/r/20241202-fd-dp-audio-fixup-v2-2-d9187ea96dad@linaro.org
[quic_abhinavk@quicinc.com: minor fix in the commit message]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>