Add an interface to query whether KFD has any active queues.
v2: fix build issues
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flush the g2h worker explicitly if TLB timeout happens which is
observed on LNL and that points to the recent scheduling issue with
E-cores on LNL.
This is similar to the recent fix:
commit e515272338 ("drm/xe/guc/ct: Flush g2h worker in case of g2h
response timeout") and should be removed once there is E core
scheduling fix.
v2: Add platform check(Himal)
v3: Remove gfx platform check as the issue related to cpu
platform(John)
Use the common WA macro(John) and print when the flush
resolves timeout(Matt B)
v4: Remove the resolves log and do the flush before taking
pending_lock(Matt A)
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2687
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029120117.449694-3-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit e1f6fa5566)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Flush xe ordered_wq in case of ufence timeout which is observed
on LNL and that points to recent scheduling issue with E-cores.
This is similar to the recent fix:
commit e515272338 ("drm/xe/guc/ct: Flush g2h worker in case of g2h
response timeout") and should be removed once there is a E-core
scheduling fix for LNL.
v2: Add platform check(Himal)
s/__flush_workqueue/flush_workqueue(Jani)
v3: Remove gfx platform check as the issue related to cpu
platform(John)
v4: Use the Common macro(John) and print when the flush resolves
timeout(Matt B)
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2754
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029120117.449694-2-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 38c4c8722b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Move LNL scheduling WA to xe_device.h so this can be used in other
places without needing keep the same comment about removal of this WA
in the future. The WA, which flushes work or workqueues, is now wrapped
in macros and can be reused wherever needed.
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
cc: stable@vger.kernel.org # v6.11+
Suggested-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029120117.449694-1-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit cbe006a649)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Drop the exclusive client count tracking and use the filelist from the
drm to track the active clients. This also ensures the clients created
internally by the driver won't block changing the ccs mode.
Fixes: ce8c161cba ("drm/xe: Add ref counting for xe_file")
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008073628.377433-3-balasubramani.vivekanandan@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 1c35f1ed1f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
CCS_MODE register requires setting mask bits from Xe2+ platforms. Set
the mask bits unconditionally, as those bits are unused for older
platforms.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008073628.377433-2-balasubramani.vivekanandan@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 23ea2c7572)
[ Fix conflict with mmio refactors ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Some members of the drm_crtc structure have been deprecated in favor of
equivalent members in the drm_crtc_state structure. As reported by Ville
Syrjala [1], the VKMS driver was still using these deprecated fields. This
commit updates the VKMS driver to use the new drm_crtc_state fields
instead.
Additionally, this commit removes the call to
`drm_calc_timestamping_constants` in `vkms_enable_vblank` as it is
redundant. This calculation is already performed in
`vkms_atomic_commit_tail` by calling
`drm_atomic_helper_commit_modeset_disables`.
[1]:https://lore.kernel.org/all/20241002182200.15363-1-ville.syrjala@linux.intel.com/
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003-remove-legacy-v1-1-0b7db1f1a1a6@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Didn't notice drm/drm-next had the build fix for drm_bridge, so ended up
committing the same patch. Sync with drm and pretend it didn't happen?
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:
drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
95 | ret = drm_bridge_attach(encoder, bridge, NULL,
| ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
96 | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
| ^
Include the header directly.
Fixes: 004555a18d ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The IT6505 bridge chip has a active low reset line. Since it is a
"reset" and not an "enable" line, the GPIO should be asserted to
put it in reset and deasserted to bring it out of reset during
the power on sequence.
The polarity was inverted when the driver was first introduced, likely
because the device family that was targeted had an inverting level
shifter on the reset line.
The MT8186 Corsola devices already have the IT6505 in their device tree,
but the whole display pipeline is actually disabled and won't be enabled
until some remaining issues are sorted out. The other known user is
the MT8183 Kukui / Jacuzzi family; their device trees currently do not
have the IT6505 included.
Fix the polarity in the driver while there are no actual users.
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029095411.657616-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Introduce the scoped variant of the loop to automatically release the
child node when it goes out of scope, which is more robust than the
non-scoped variant, and accounts for new early exits that could be added
in the future.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241011-mtk_drm_drv_memleak-v1-2-2b40c74c8d75@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Early exits (goto, break, return) from for_each_child_of_node() required
an explicit call to of_node_put(), which was not introduced with the
break if cnt == MAX_CRTC.
Add the missing of_node_put() before the break.
Cc: stable@vger.kernel.org
Fixes: d761b9450e ("drm/mediatek: Add cnt checking for coverity issue")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241011-mtk_drm_drv_memleak-v1-1-2b40c74c8d75@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add drm_panic support for nv50+ cards.
It's enough to get the panic screen while running Gnome/Wayland with
an nv50+ nvidia GPU.
It doesn't support multi-plane or compressed format yet.
Tiling is tested on GTX1650 (Turing), GeForce GT 1030 (Pascal) and
Geforce 8800 GTS (Tesla).
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022185553.1103384-4-jfalempe@redhat.com
CRTC creation uses drmm_crtc_init_with_planes(), which automatically
handles cleanup. However, an unnecessary call to drm_crtc_cleanup() is
still present in the vkms_output_init() error path.
Fixes: 99cc528ebe ("drm/vkms: Use drmm_crtc_init_with_planes()")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031183835.3633-1-jose.exposito89@gmail.com
Acked-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
When remaining resources are being cleaned up on driver close,
outstanding VM mappings may result in resources being leaked, due
to an object reference loop, as shown below, with each object (or
set of objects) referencing the object below it:
PVR GEM Object
GPU scheduler "finished" fence
GPU scheduler “scheduled” fence
PVR driver “done” fence
PVR Context
PVR VM Context
PVR VM Mappings
PVR GEM Object
The reference that the PVR VM Context has on the VM mappings is a
soft one, in the sense that the freeing of outstanding VM mappings
is done as part of VM context destruction; no reference counts are
involved, as is the case for all the other references in the loop.
To break the reference loop during cleanup, free the outstanding
VM mappings before destroying the PVR Context associated with the
VM context.
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/8a25924f-1bb7-4d9a-a346-58e871dfb1d1@imgtec.com
This adds a linked list of VM contexts which is needed for the next patch
to be able to correctly track VM contexts for destruction on file close.
It is only safe for VM contexts to be removed from the list and destroyed
when not in interrupt context.
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/e57128ea-f0ce-4e93-a9d4-3f033a8b06fa@imgtec.com
Changes in Dynamic Range and Mastering infoframe
should not trigger a full modeset. Therefore, allow
fastset. DP SDP programming is already hooked up in the
fastset flow but HDMI AVI infoframe update is not, add it.
Any other infoframe that can be fastset should be added to
the helper intel_hdmi_fastset_infoframes().
v3:
- Create a wrapper intel_ddi_update_pipe_hdmi to stick to
uniform naming (Jani)
- Do not disable HDMI AVI infoframe if already disabled (Uma)
v2:
- Update HDMI AVI infoframe during fastset.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023044122.3889137-1-chaitanya.kumar.borah@intel.com
We are currently seeing unexpected link trainings with several different
eDP panels. These are caused by these panels stating bad link status in
their dpcd registers. This can be observed by doing following test:
1. Boot up without Xe module loaded
2. Load Xe module with PSR disabled:
$ modprobe xe enable_psr=0
3. Read panel link status register
$ dpcd_reg read --offset 0x200e --count=1
0x200e: 00
4. Enable PSR, sleep for 2 seconds and disable PSR again:
$ echo 0x1 > /sys/kernel/debug/dri/0/i915_edp_psr_debug
$ echo "-1" > /sys/kernel/debug/dri/0000:00:02.0/xe_params/enable_psr
$ echo 0x0 > /sys/kernel/debug/dri/0/i915_edp_psr_debug
$ sleep 2
$ cat /sys/kernel/debug/dri/0/i915_edp_psr_status | grep status
$ echo 0x1 > /sys/kernel/debug/dri/0/i915_edp_psr_debug
Source PSR/PanelReplay status: DEEP_SLEEP [0x80310030]
5. Now read panel link status registers again:
$ dpcd_reg read --offset 0x200e --count=1
0x200e: 80
Workaround this by not trusting link status registers after PSR is enabled
until first short pulse interrupt is received.
v2:
- clear link_ok flag on pipe disable
- remove useless comment
- modify intel_dp_needs_link_retrain return statement
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029122415.1789528-1-jouni.hogander@intel.com
Backmerging to get up-to-date and to bring in a fix that was
merged through drm-misc-fixes.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Currently, even though there is a bit to control FEC enable/disable
individually, the FEC Decode Enable sequence is sent by the SOC only
once TRANS_CONF enable is set. This ties the FEC enabling too tightly
to modeset and therefore cannot be re-issued (in case of failure)
without a modeset.
From PTL, FEC_DECODE_EN sequence can be sent to a DPRX independent
of TRANS_CONF enable. This allows us to re-issue an FEC_DECODE_EN
sequence without a modeset. Hence allowing us to have a retry
mechanism in case the DPRX does not respond with an FEC_ENABLE
within certain amount of time.
While at it, replace struct drm_i915_private with struct intel_display
v4:
- More code refactor [Jani]
- use struct intel_display [Jani]
- Optimize logging [Jani]
v3:
- Make the commit message more legible [Jani]
- Refactor code to re-use existing code [Jani]
- Do away with platform dependent FEC enable checks [Jani]
v2:
- Refactor code to avoid duplication and improve readability [Jani]
- In case of PTL, wait for FEC status directly after FEC enable [Srikanth]
- Wait for FEC_ENABLE_LIVE_STATUS to be cleared before
re-enabling FEC [Srikanth]
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241024061002.4085137-1-chaitanya.kumar.borah@intel.com
Add support for Exynos 7870 DECON in the Exynos 7 DECON driver.
Some Exynos 7 series SoCs (Exynos 7580 onwards) have different
register values. In order to address such changes, include a driver
data struct (named decon_data) so that correct base addresses and
shift values can be provided.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The DECON channels are not cleared properly as the windows aren't
shadow protected. When accompanied with an IOMMU, it pagefaults, and
the kernel panics.
Implement shadow protect/unprotect, along with a standalone update,
for channel clearing to properly take effect.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The clkdiv values are incorrect as ideal_clk is in kHz and the clock
rate of vclk is in Hz. Multiply 1000 to ideal_clk to bring it to Hz.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Modify the functions to accept a pointer to struct decon_context
instead.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_drm_crtc_wait_pending_update, exynos_drm_crtc_finish_update
are not used anymore.
Signed-off-by: Kwanghoon Son <k.son@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Replace 'initailization' with 'initialization' in the comment.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Unfortunately the tooling doesn't check documents placed before funciton
prototypes. Such comments frequently become outdated, miss several
params, etc. Move documentation for the functions to be placed before
the actual function body, allowing 'make W=1' to actually check these
comments and report an error.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/622690/
Link: https://lore.kernel.org/r/20241102-dpu-docs-rework-v1-1-d735853fd6db@linaro.org
fdget() is the first thing done in scope, all matching fdput() are
immediately followed by leaving the scope.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Split dpu_plane_atomic_check() function into two pieces:
dpu_plane_atomic_check_nosspp() performing generic checks on the pstate,
without touching the associated SSPP blocks,
and
dpu_plane_atomic_check_sspp(), which takes into account used SSPPs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/621484/
Link: https://lore.kernel.org/r/20241025-dpu-virtual-wide-v6-5-0310fd519765@linaro.org
Max upscale / downscale factors are constant between platforms. In
preparation to adding support for virtual planes and allocating SSPP
blocks on demand move max scaling factors out of the HW catalog and
handle them in the dpu_plane directly. If any of the scaling blocks gets
different limitations, this will have to be handled separately, after
the plane refactoring.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/621481/
Link: https://lore.kernel.org/r/20241025-dpu-virtual-wide-v6-4-0310fd519765@linaro.org
The virt_formats / virt_num_formats are not used by the current driver
and are not going to be used in future since formats for virtual planes
are handled in a different way, by forbidding unsupported combinations
during atomic_check. Drop those fields now.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/621479/
Link: https://lore.kernel.org/r/20241025-dpu-virtual-wide-v6-3-0310fd519765@linaro.org
- Fix missing HPD interrupt enabling, bringing one PM refactor with it
(Imre / Maarten)
- Workaround LNL GGTT invalidation not being visible to GuC
(Matthew Brost)
- Avoid getting jobs stuck without a protecting timeout (Matthew Brost)
-----BEGIN PGP SIGNATURE-----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=kIfk
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-10-31' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix missing HPD interrupt enabling, bringing one PM refactor with it
(Imre / Maarten)
- Workaround LNL GGTT invalidation not being visible to GuC
(Matthew Brost)
- Avoid getting jobs stuck without a protecting timeout (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tsbftadm7owyizzdaqnqu7u4tqggxgeqeztlfvmj5fryxlfomi@5m5bfv2zvzmw
GGTT mappings reside on the device and this state is lost during suspend
/ d3cold thus this state must be restored resume regardless if the BO is
in system memory or VRAM.
v2:
- Unnecessary parentheses around bo->placements[0] (Checkpatch)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031182257.2949579-1-matthew.brost@intel.com
Multiple single-ioctl binds can be split up into multiple bind
ioctls, reducing the memory required to hold the bind array.
So rather than allowing the OOM killer to be invoked, return
-ENOMEM or -ENOBUFS to user-space to take corrective action.
v2:
- Add __GFP_NOWARN to __GFP_RETRY_MAYFAIL allocations to avoid
spamming the kernel log if a recoverable allocation fails.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2701
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031153732.164995-3-thomas.hellstrom@linux.intel.com
Flush the g2h worker explicitly if TLB timeout happens which is
observed on LNL and that points to the recent scheduling issue with
E-cores on LNL.
This is similar to the recent fix:
commit e515272338 ("drm/xe/guc/ct: Flush g2h worker in case of g2h
response timeout") and should be removed once there is E core
scheduling fix.
v2: Add platform check(Himal)
v3: Remove gfx platform check as the issue related to cpu
platform(John)
Use the common WA macro(John) and print when the flush
resolves timeout(Matt B)
v4: Remove the resolves log and do the flush before taking
pending_lock(Matt A)
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2687
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029120117.449694-3-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Flush xe ordered_wq in case of ufence timeout which is observed
on LNL and that points to recent scheduling issue with E-cores.
This is similar to the recent fix:
commit e515272338 ("drm/xe/guc/ct: Flush g2h worker in case of g2h
response timeout") and should be removed once there is a E-core
scheduling fix for LNL.
v2: Add platform check(Himal)
s/__flush_workqueue/flush_workqueue(Jani)
v3: Remove gfx platform check as the issue related to cpu
platform(John)
v4: Use the Common macro(John) and print when the flush resolves
timeout(Matt B)
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2754
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029120117.449694-2-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Move LNL scheduling WA to xe_device.h so this can be used in other
places without needing keep the same comment about removal of this WA
in the future. The WA, which flushes work or workqueues, is now wrapped
in macros and can be reused wherever needed.
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
cc: stable@vger.kernel.org # v6.11+
Suggested-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029120117.449694-1-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Drop the exclusive client count tracking and use the filelist from the
drm to track the active clients. This also ensures the clients created
internally by the driver won't block changing the ccs mode.
Fixes: ce8c161cba ("drm/xe: Add ref counting for xe_file")
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008073628.377433-3-balasubramani.vivekanandan@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Starting with display version 13 the fuse bit to disable Display PM has
been removed.
v2: Bit removed starting with display version 13 (MattR)
v3: DG2 still uses this fuse bit (MattR)
Bspec: 50075, 69464
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030195507.2753404-1-clinton.a.taylor@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The recent attempt to make the MediaTek DRM driver build for non-ARM
compile tests made the driver unbuildable for arm64 platforms. Since
this is used on both ARM and arm64 platforms, just drop the dependency
on ARM.
Fixes: d2db0b8fd7 ("drm/mediatek: Allow build with COMPILE_TEST=y")
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029111309.737263-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>