Technically the or_reset() means we call the action on failure, however
that would lead to unbalanced rpm put(). Move the get() earlier to fix
this. It should be extremely unlikely to ever trigger this in practice.
Fixes: 90936a0a4c ("drm/xe: Don't suspend device upon wedge")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009084808.204432-4-matthew.auld@intel.com
(cherry picked from commit a187c1b0a8)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Currently we can call fence_fini() twice if something goes wrong when
sending the GuC CT for the tlb request, since we signal the fence and
return an error, leading to the caller also calling fini() on the error
path in the case of stack version of the flow, which leads to an extra
rpm put() which might later cause device to enter suspend when it
shouldn't. It looks like we can just drop the fini() call since the
fence signaller side will already call this for us.
There are known mysterious splats with device going to sleep even with
an rpm ref, and this could be one candidate.
v2 (Matt B):
- Prefer warning if we detect double fini()
Fixes: f002702290 ("drm/xe: Hold a PM ref when GT TLB invalidations are inflight")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009084808.204432-3-matthew.auld@intel.com
(cherry picked from commit cfcbc0520d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add workaround (wa) 15016589081 which applies to Xe2_v3_LPG_MD.
Xe2_v3_LPG_MD is a Lunar Lake platform with GFX version: 20.04.
This wa is type: permanent, and hence is applicable on all steppings.
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009065542.283151-1-aradhya.bhatia@intel.com
(cherry picked from commit 8fb1da9f9b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
If an MST branch device doesn't support DSC for a given mode, but the
MST link has enough BW for the mode, assume that the branch device does
support the mode using an uncompressed stream.
Fixes: 55eaef1641 ("drm/i915/dp_mst: Handle the Synaptics HBlank expansion quirk")
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009110135.1216498-2-imre.deak@intel.com
(cherry picked from commit 4e75c3e208)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The MST branch device may not support the number of DSC slices a mode
requires, handle the error in this case.
Fixes: 4e0837a8d0 ("drm/i915/dp_mst: Account for FEC and DSC overhead during BW allocation")
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009110135.1216498-1-imre.deak@intel.com
(cherry picked from commit 802a69b6b8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The new driver needs the dsc helper code to be available:
x86_64-linux-ld: vmlinux.o: in function `s6e3ha8_amb577px01_wqhd_prepare':
panel-samsung-s6e3ha8.c:(.text+0x16b1e65): undefined reference to `drm_dsc_pps_payload_pack'
Select it from Kconfig as we do for other similar drivers.
Fixes: 779679d3c1 ("drm/panel: Add support for S6E3HA8 panel driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20241015153442.3757061-1-arnd@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015153442.3757061-1-arnd@kernel.org
The CP_SMMU_TABLE_UPDATE _should_ be waiting for idle, but on some
devices (x1-85, possibly others), it seems to pass that barrier while
there are still things in the event completion FIFO waiting to be
written back to memory.
Work around that by adding a fence wait before context switch. The
CP_EVENT_WRITE that writes the fence is the last write from a submit,
so seeing this value hit memory is a reliable indication that it is
safe to proceed with the context switch.
v2: Only emit CP_WAIT_TIMESTAMP on a7xx, as it is not supported on a6xx.
Conversely, I've not been able to reproduce this issue on a6xx, so
hopefully it is limited to a7xx, or perhaps just certain a7xx
devices.
Fixes: af66706acc ("drm/msm/a6xx: Add skeleton A7xx support")
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/63
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Fault is currently of type u32 and with the introduction of the
generalized vdso/page.h we trigger the error below:
drivers/gpu/drm/i915/gt/intel_gt_print.h:29:36: error: format ‘%lx’ expects
argument of type ‘long unsigned int’, but argument 6 has type ‘u32’ {aka
‘unsigned int’} [-Werror=format=]
29 | drm_dbg(&(_gt)->i915->drm, "GT%u: " _fmt, (_gt)->info.id,
| ^~~~~~~~
include/drm/drm_print.h:424:39: note: in definition of macro ‘drm_dev_dbg’
424 | __drm_dev_dbg(NULL, dev, cat, fmt, ##__VA_ARGS__)
| ^~~
include/drm/drm_print.h:524:33: note: in expansion of macro ‘drm_dbg_driver’
524 | #define drm_dbg(drm, fmt, ...) drm_dbg_driver(drm, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~
linux/drivers/gpu/drm/i915/gt/intel_gt_print.h:29:9: note: in expansion of macro
‘drm_dbg’
29 | drm_dbg(&(_gt)->i915->drm, "GT%u: " _fmt, (_gt)->info.id,
| ^~~~~~~
drivers/gpu/drm/i915/gt/intel_gt.c:310:25: note: in expansion of macro ‘gt_dbg’
310 | gt_dbg(gt, "Unexpected fault\n"
| ^~~~~~
This happens because the type of PAGE_MASK depends on the architecture.
Prevent the compilation error changing the 'fault' type to unsigned
long.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20241014151340.1639555-2-vincenzo.frascino@arm.com
Don't set the merge_3d pending flush bits if the mode_3d is
BLEND_3D_NONE.
Always flushing merge_3d can cause timeout issues when there are
multiple commits with concurrent writeback enabled.
This is because the video phys enc waits for the hw_ctl flush register
to be completely cleared [1] in its wait_for_commit_done(), but the WB
encoder always sets the merge_3d pending flush during each commit
regardless of if the merge_3d is actually active.
This means that the hw_ctl flush register will never be 0 when there are
multiple CWB commits and the video phys enc will hit vblank timeout
errors after the first CWB commit.
[1] commit fe9df3f50c ("drm/msm/dpu: add real wait_for_commit_done()")
Fixes: 3e79527a33 ("drm/msm/dpu: enable merge_3d support on sm8150/sm8250")
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/619092/
Link: https://lore.kernel.org/r/20241009-mode3d-fix-v1-1-c0258354fadc@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
In order to store device DMA parameters, the DMA framework depends on
the device's dma_parms field to point at a valid memory location. Add
backing storage for this in struct host1x_memory_context and point to
it.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916133320.368620-1-thierry.reding@gmail.com
(cherry picked from commit b4ad4ef374)
Signed-off-by: Thierry Reding <treding@nvidia.com>
Include the encoder itself in its possible_clones bitmask.
In the past nothing validated that drivers were populating
possible_clones correctly, but that changed in commit
74d2aacbe8 ("drm: Validate encoder->possible_clones").
Looks like radeon never got the memo and is still not
following the rules 100% correctly.
This results in some warnings during driver initialization:
Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7)
WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c
...
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Fixes: 74d2aacbe8 ("drm: Validate encoder->possible_clones")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/20241009000321.418e4294@yea/
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b6e7d4064)
Cc: stable@vger.kernel.org
Process device data pdd->vram_usage is read by rocm-smi via sysfs, this
is currently missing the svm_bo usage accounting, so "rocm-smi
--showpids" per process VRAM usage report is incorrect.
Add pdd->vram_usage accounting when svm_bo allocation and release,
change to atomic64_t type because it is updated outside process mutex
now.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 98c0b0efcc)
With Unified MES enabled in gfx12, need separate event log buffer for the
2 MES pipes to avoid data overwrite.
Signed-off-by: Michael Chen <michael.chen@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 144df260f3)
Cc: stable@vger.kernel.org # 6.11.x
Before this patch, if multiple BO_HANDLES chunks were submitted,
the error -EINVAL would be correctly set but could be overwritten
by the return value from amdgpu_cs_p1_bo_handles(). This patch
ensures that if there are multiple BO_HANDLES, we stop.
Fixes: fec5f8e8c6 ("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit")
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 40f2cd9882)
Cc: stable@vger.kernel.org
It should be enabled on both bare metal and VFs.
Fixes: e189be9b2e ("drm/amdgpu: Add enforce_isolation sysfs attribute")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Cc: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
(cherry picked from commit dc8847b054)
On chips that support it, you can specificy 0 and 0xffff for
min and max and the PMFW will use that to determine the optimal
min and max. This enables optimal performance when the
user manually switches between performance levels using sysfs.
Previously we'd set soft min/max which could limit performance.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The >= ARRAY_SIZE() should be > ARRAY_SIZE() to prevent an out of
bounds read.
Fixes: 012be6f22c ("drm/amdgpu: Add sysfs interfaces for NPS mode")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include the encoder itself in its possible_clones bitmask.
In the past nothing validated that drivers were populating
possible_clones correctly, but that changed in commit
74d2aacbe8 ("drm: Validate encoder->possible_clones").
Looks like radeon never got the memo and is still not
following the rules 100% correctly.
This results in some warnings during driver initialization:
Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7)
WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c
...
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Fixes: 74d2aacbe8 ("drm: Validate encoder->possible_clones")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/20241009000321.418e4294@yea/
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable dynamic ODM when sharpness is enabled
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
The function core_link_read_dpcd returns status which is not used at
all, making them useless assignments.
[HOW]
Print error messages if core_link_read_dpcd does not return DC_OK.
This fixes 2 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to clean up unnecessary asserts, one of which is an assert in
resource_is_pipe_type that fires if a pipe has no stream and still has
pointers to other pipes ("dangling state"). This gets hit because pipes
are not properly cleaned up in reset_back_end_for_pipe. When resetting a
pipe, the existing MPCC / ODM combine pointers are no longer valid,
especially when we put ODM in bypass.
[How]
- reset pipe pointers in reset_back_end_for_pipe
- remove useless code to avoid confusion
(a long time ago it had a reason to be there, not anymore)
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Pass in sharpening policy through plane state from control side
[How]
Add sharpener support through dc_caps.
Add sharpen policy to plane state and move to spl_input.
Pass sharpen policy from plane state to SPL.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Code for dcn401 to calculate available MALL size for display was shared
with dcn32 and did not provide the correct result for all ASICs.
[HOW]
Add dcn401 specific function to properly calculate the available MALL
for display.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To get sink emission rate information for future
supported refresh rate calculation.
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Print error messages when programming shaper lut or 3dlut fails.
This fixes 5 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A race condition occurs between cursor movement and vertical interrupt control
thread from OS, with both threads trying to exit IPS2.
Vertical interrupt control thread clears the prev driver allow signal while not fully
finishing the IPS2 exit process.
[How]
We want to detect all the allow signals have been cleared before we perform the full exit.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
Previous change for Coverity has caused regression on visual confirm
so fix it by reverting the part that affects visual confirm.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is a known HW bug that causes the internal 3DLUT fetch signal to
be lost at VREADY, regardless of whether the OTG lock is being held or
not. A workaround is necessary to make sure that this internal signal
stays up after OTG unlock.
[How]
Set the 3DLUT_ENABLE bit immediately before and after the unlock. Also
use VUPDATE_KEEPOUT to prevent lock transition in the region between
VSTARTUP and VREADY, which could cause issues with this WA sequence.
Also including misc. 3DLUT DMA-related sequence fixes to address a few
regressions causing corruption.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently idle worker thread that checks for HPD while system is in IPS2
only supports headless and static screen use-cases.
In other display-off scenarios hotplug may not work.
[How]
For display-off only allow idle optimization when no display is connected.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Idle worker thread waits HPD_DETECTION_TIME for HPD processing complete.
Some displays require longer time for that.
[How]
Increase HPD_DETECTION_TIME to 100ms.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
"split_pipe" are assigned to test_pipe and then immediately are updated
to other values. The same also applies to "status" as well.
Similarly, "id", "dwb" and "unused_dpps" are assigned but the functions
immediately return, and thus they have no effects.
As a results, the assignments removed.
This fixes 5 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
dpcd_get_tunneling_device_data calls core_link_read_dpcd which can
fail. The status from core_link_read_dpcd should be checked and error
messages is printed in case of failures.
This fixes 1 UNUSED_VALUE issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
drm_dp_dpcd_write() returns negative error on failure and thus returned
values need to be checked.
This fixes 3 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When reset on initialization is requested, wait for the reset to finish.
In cases where module is loaded after boot, this makes sure all
initialization work is done after a successful return of modprobe.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ramesh Errabolu <ramesh.errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Process device data pdd->vram_usage is read by rocm-smi via sysfs, this
is currently missing the svm_bo usage accounting, so "rocm-smi
--showpids" per process VRAM usage report is incorrect.
Add pdd->vram_usage accounting when svm_bo allocation and release,
change to atomic64_t type because it is updated outside process mutex
now.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for dcn3x IP's. The check ensures that the
index is within the valid range of the link_enc_hpd_regs array to
prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With Unified MES enabled in gfx12, need separate event log buffer for the
2 MES pipes to avoid data overwrite.
Signed-off-by: Michael Chen <michael.chen@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the memory ranges published in discovery table to deduce NPS mode
of GC v9.4.3 VFs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Vignesh Chander <Vignesh.Chander@amd.com>
Tested-by: Vignesh Chander <Vignesh.Chander@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before this patch, if multiple BO_HANDLES chunks were submitted,
the error -EINVAL would be correctly set but could be overwritten
by the return value from amdgpu_cs_p1_bo_handles(). This patch
ensures that if there are multiple BO_HANDLES, we stop.
Fixes: fec5f8e8c6 ("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit")
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>