DVI sinks can't deal with YCbCr. Make sure we have a HDMI sink connected
after the PCON before doing YCbCr 4:2:0 output.
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260409101539.22032-7-ville.syrjala@linux.intel.com
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Currently we only validate "4:2:0 also" modes as RGB. But
if that fails we could perhaps still use the mode in with
4:2:0 output. All we have to do is retry the validation with
the different sink format.
So far we did the double validation only so far as it affects
PCON TMDS clock limits. But validating everything twice seems
a bit more sane.
Note that intel_dp_output_format() might still end up picking
RGB for the actual output format (and letting PCON deal with
the YCbCr conversion). So I suppose we could still fail the
validation due to that, and forcing even the output format
to 4:2:0 might solve it on a third try. But we'd need the
same fallback logic in intel_dp_compute_config(). For now
this seems sufficient.
v2: Pass output_format to intel_dp_mode_min_link_bpp_x16()
Add TODO about remaining issues
Nuke intel_dp_sink_format()
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260409101539.22032-6-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Restructure intel_dp_compute_output_format() to resemble the new
intel_hdmi_compute_output_formats().
Again, we basically have two main code paths:
- YCbCr 4:2:0 only modes
- everything else including YCbCr 4:2:0 also modes
Take the exact same approach with the DP code, making the
format selection much less convoluted.
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260409101539.22032-5-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Restructure the HDMI mode validation to resemble the new
intel_hdmi_compute_formats(). Keeping the two in sync helps
to avoid different bugs in each.
The main difference between mode_valid() and
intel_hdmi_compute_formats() is that we don't want the
Hail Mary RGB fallback for "4:2:0 only" modes.
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260409101539.22032-4-ville.syrjala@linux.intel.com
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
intel_hdmi_compute_output_format() is a bit of a mess. Try to
restructure it into a more readable form.
Right now we basically have two main code paths:
- YCbCr 4:2:0 only modes
- everything else including YCbCr 4:2:0 also modes
Those two basically do the same two steps (try 4:2:0 and try 4:4:4)
but in opposite orders. Let's write that out in a more explicit
if-else form. And since I'm running out of function names I'll
rename the function with that high level logic into
intel_hdmi_compute_formats() and it will call (the new)
intel_hdmi_compute_output_format() with an explicit sink_format
as needed.
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260409101539.22032-3-ville.syrjala@linux.intel.com
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
intel_hdmi_mode_valid() is calling intel_pfit_mode_valid() only
on the first attempt (4:2:0 for "4:2:0 only" modes, 4:4:4 for
everything else). Add the call also for the "4:2:0 also" modes case
so that we actually know the pipe scaler can actually produce the
4:2:0 output.
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260409101539.22032-2-ville.syrjala@linux.intel.com
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Toolchain and infrastructure:
- Bump the minimum Rust version to 1.85.0 (and 'bindgen' to 0.71.1).
As proposed in LPC 2025 and the Maintainers Summit [1], we are going
to follow Debian Stable's Rust versions as our minimum versions.
Debian Trixie was released on 2025-08-09 with a Rust 1.85.0 and
'bindgen' 0.71.1 toolchain, which is a fair amount of time for e.g.
kernel developers to upgrade.
Other major distributions support a Rust version that is high enough
as well, including:
+ Arch Linux.
+ Fedora Linux.
+ Gentoo Linux.
+ Nix.
+ openSUSE Slowroll and openSUSE Tumbleweed.
+ Ubuntu 25.10 and 26.04 LTS. In addition, 24.04 LTS using
their versioned packages.
The merged patch series comes with the associated cleanups and
simplifications treewide that can be performed thanks to both bumps,
as well as documentation updates.
In addition, start using 'bindgen''s '--with-attribute-custom-enum'
feature to set the 'cfi_encoding' attribute for the 'lru_status' enum
used in Binder.
Link: https://lwn.net/Articles/1050174/ [1]
- Add experimental Kconfig option ('CONFIG_RUST_INLINE_HELPERS') that
inlines C helpers into Rust.
Essentially, it performs a step similar to LTO, but just for the
helpers, i.e. very local and fast.
It relies on 'llvm-link' and its '--internalize' flag, and requires
a compatible LLVM between Clang and 'rustc' (i.e. same major version,
'CONFIG_RUSTC_CLANG_LLVM_COMPATIBLE'). It is only enabled for two
architectures for now.
The result is a measurable speedup in different workloads that
different users have tested. For instance, for the null block driver,
it amounts to a 2%.
- Support global per-version flags.
While we already have per-version flags in many places, we didn't
have a place to set global ones that depend on the compiler version,
i.e. in 'rust_common_flags', which sometimes is needed to e.g. tweak
the lints set per version.
Use that to allow the 'clippy::precedence' lint for Rust < 1.86.0,
since it had a change in behavior.
- Support overriding the crate name and apply it to Rust Binder, which
wanted the module to be called 'rust_binder'.
- Add the remaining '__rust_helper' annotations (started in the
previous cycle).
'kernel' crate:
- Introduce the 'const_assert!' macro: a more powerful version of
'static_assert!' that can refer to generics inside functions or
implementation bodies, e.g.:
fn f<const N: usize>() {
const_assert!(N > 1);
}
fn g<T>() {
const_assert!(size_of::<T>() > 0, "T cannot be ZST");
}
In addition, reorganize our set of build-time assertion macros
('{build,const,static_assert}!') to live in the 'build_assert'
module.
Finally, improve the docs as well to clarify how these are different
from one another and how to pick the right one to use, and their
equivalence (if any) to the existing C ones for extra clarity.
- 'sizes' module: add 'SizeConstants' trait.
This gives us typed 'SZ_*' constants (avoiding casts) for use in
device address spaces where the address width depends on the hardware
(e.g. 32-bit MMIO windows, 64-bit GPU framebuffers, etc.), e.g.:
let gpu_heap = 14 * u64::SZ_1M;
let mmio_window = u32::SZ_16M;
- 'clk' module: implement 'Send' and 'Sync' for 'Clk' and thus simplify
the users in Tyr and PWM.
- 'ptr' module: add 'const_align_up'.
- 'str' module: improve the documentation of the 'c_str!' macro to
explain that one should only use it for non-literal cases (for the
other case we instead use C string literals, e.g. 'c"abc"').
- Disallow the use of 'CStr::{as_ptr,from_ptr}' and clean one such use
in the 'task' module.
- 'sync' module: finish the move of 'ARef' and 'AlwaysRefCounted'
outside of the 'types' module, i.e. update the last remaining
instances and finally remove the re-exports.
- 'error' module: clarify that 'from_err_ptr' can return 'Ok(NULL)',
including runtime-tested examples.
The intention is to hopefully prevent UB that assumes the result of
the function is not 'NULL' if successful. This originated from a case
of UB I noticed in 'regulator' that created a 'NonNull' on it.
Timekeeping:
- Expand the example section in the 'HrTimer' documentation.
- Mark the 'ClockSource' trait as unsafe to ensure valid values for
'ktime_get()'.
- Add 'Delta::from_nanos()'.
'pin-init' crate:
- Replace the 'Zeroable' impls for 'Option<NonZero*>' with impls of
'ZeroableOption' for 'NonZero*'.
- Improve feature gate handling for unstable features.
- Declutter the documentation of implementations of 'Zeroable' for
tuples.
- Replace uses of 'addr_of[_mut]!' with '&raw [mut]'.
rust-analyzer:
- Add type annotations to 'generate_rust_analyzer.py'.
- Add support for scripts written in Rust ('generate_rust_target.rs',
'rustdoc_test_builder.rs', 'rustdoc_test_gen.rs').
- Refactor 'generate_rust_analyzer.py' to explicitly identify host and
target crates, improve readability, and reduce duplication.
And some other fixes, cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=xRA/
-----END PGP SIGNATURE-----
Merge tag 'rust-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Bump the minimum Rust version to 1.85.0 (and 'bindgen' to 0.71.1).
As proposed in LPC 2025 and the Maintainers Summit [1], we are
going to follow Debian Stable's Rust versions as our minimum
versions.
Debian Trixie was released on 2025-08-09 with a Rust 1.85.0 and
'bindgen' 0.71.1 toolchain, which is a fair amount of time for e.g.
kernel developers to upgrade.
Other major distributions support a Rust version that is high
enough as well, including:
+ Arch Linux.
+ Fedora Linux.
+ Gentoo Linux.
+ Nix.
+ openSUSE Slowroll and openSUSE Tumbleweed.
+ Ubuntu 25.10 and 26.04 LTS. In addition, 24.04 LTS using
their versioned packages.
The merged patch series comes with the associated cleanups and
simplifications treewide that can be performed thanks to both
bumps, as well as documentation updates.
In addition, start using 'bindgen''s '--with-attribute-custom-enum'
feature to set the 'cfi_encoding' attribute for the 'lru_status'
enum used in Binder.
Link: https://lwn.net/Articles/1050174/ [1]
- Add experimental Kconfig option ('CONFIG_RUST_INLINE_HELPERS') that
inlines C helpers into Rust.
Essentially, it performs a step similar to LTO, but just for the
helpers, i.e. very local and fast.
It relies on 'llvm-link' and its '--internalize' flag, and requires
a compatible LLVM between Clang and 'rustc' (i.e. same major
version, 'CONFIG_RUSTC_CLANG_LLVM_COMPATIBLE'). It is only enabled
for two architectures for now.
The result is a measurable speedup in different workloads that
different users have tested. For instance, for the null block
driver, it amounts to a 2%.
- Support global per-version flags.
While we already have per-version flags in many places, we didn't
have a place to set global ones that depend on the compiler
version, i.e. in 'rust_common_flags', which sometimes is needed to
e.g. tweak the lints set per version.
Use that to allow the 'clippy::precedence' lint for Rust < 1.86.0,
since it had a change in behavior.
- Support overriding the crate name and apply it to Rust Binder,
which wanted the module to be called 'rust_binder'.
- Add the remaining '__rust_helper' annotations (started in the
previous cycle).
'kernel' crate:
- Introduce the 'const_assert!' macro: a more powerful version of
'static_assert!' that can refer to generics inside functions or
implementation bodies, e.g.:
fn f<const N: usize>() {
const_assert!(N > 1);
}
fn g<T>() {
const_assert!(size_of::<T>() > 0, "T cannot be ZST");
}
In addition, reorganize our set of build-time assertion macros
('{build,const,static_assert}!') to live in the 'build_assert'
module.
Finally, improve the docs as well to clarify how these are
different from one another and how to pick the right one to use,
and their equivalence (if any) to the existing C ones for extra
clarity.
- 'sizes' module: add 'SizeConstants' trait.
This gives us typed 'SZ_*' constants (avoiding casts) for use in
device address spaces where the address width depends on the
hardware (e.g. 32-bit MMIO windows, 64-bit GPU framebuffers, etc.),
e.g.:
let gpu_heap = 14 * u64::SZ_1M;
let mmio_window = u32::SZ_16M;
- 'clk' module: implement 'Send' and 'Sync' for 'Clk' and thus
simplify the users in Tyr and PWM.
- 'ptr' module: add 'const_align_up'.
- 'str' module: improve the documentation of the 'c_str!' macro to
explain that one should only use it for non-literal cases (for the
other case we instead use C string literals, e.g. 'c"abc"').
- Disallow the use of 'CStr::{as_ptr,from_ptr}' and clean one such
use in the 'task' module.
- 'sync' module: finish the move of 'ARef' and 'AlwaysRefCounted'
outside of the 'types' module, i.e. update the last remaining
instances and finally remove the re-exports.
- 'error' module: clarify that 'from_err_ptr' can return 'Ok(NULL)',
including runtime-tested examples.
The intention is to hopefully prevent UB that assumes the result of
the function is not 'NULL' if successful. This originated from a
case of UB I noticed in 'regulator' that created a 'NonNull' on it.
Timekeeping:
- Expand the example section in the 'HrTimer' documentation.
- Mark the 'ClockSource' trait as unsafe to ensure valid values for
'ktime_get()'.
- Add 'Delta::from_nanos()'.
'pin-init' crate:
- Replace the 'Zeroable' impls for 'Option<NonZero*>' with impls of
'ZeroableOption' for 'NonZero*'.
- Improve feature gate handling for unstable features.
- Declutter the documentation of implementations of 'Zeroable' for
tuples.
- Replace uses of 'addr_of[_mut]!' with '&raw [mut]'.
rust-analyzer:
- Add type annotations to 'generate_rust_analyzer.py'.
- Add support for scripts written in Rust ('generate_rust_target.rs',
'rustdoc_test_builder.rs', 'rustdoc_test_gen.rs').
- Refactor 'generate_rust_analyzer.py' to explicitly identify host
and target crates, improve readability, and reduce duplication.
And some other fixes, cleanups and improvements"
* tag 'rust-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (79 commits)
rust: sizes: add SizeConstants trait for device address space constants
rust: kernel: update `file_with_nul` comment
rust: kbuild: allow `clippy::precedence` for Rust < 1.86.0
rust: kbuild: support global per-version flags
rust: declare cfi_encoding for lru_status
docs: rust: general-information: use real example
docs: rust: general-information: simplify Kconfig example
docs: rust: quick-start: remove GDB/Binutils mention
docs: rust: quick-start: remove Nix "unstable channel" note
docs: rust: quick-start: remove Gentoo "testing" note
docs: rust: quick-start: add Ubuntu 26.04 LTS and remove subsection title
docs: rust: quick-start: update minimum Ubuntu version
docs: rust: quick-start: update Ubuntu versioned packages
docs: rust: quick-start: openSUSE provides `rust-src` package nowadays
rust: kbuild: remove "dummy parameter" workaround for `bindgen` < 0.71.1
rust: kbuild: update `bindgen --rust-target` version and replace comment
rust: rust_is_available: remove warning for `bindgen` < 0.69.5 && libclang >= 19.1
rust: rust_is_available: remove warning for `bindgen` 0.66.[01]
rust: bump `bindgen` minimum supported version to 0.71.1 (Debian Trixie)
rust: block: update `const_refs_to_static` MSRV TODO comment
...
In order to unify the handling of the panel and bridge, apply
panel_bridge helpers for Analogix DP driver. With this patch, the
bridge support will also become available.
The following changes have ben made:
- Apply plane_bridge helper to wrap the panel as the bridge.
- Remove the explicit panel APIs calls, which can be replaced with
the automic bridge APIs calls wrapped by the panel.
- Remove the unnecessary analogix_dp_bridge_get_modes().
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-9-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The analogix_dp_unbind() should be balanced with analogix_dp_bind().
There are no bridge enabling and panel preparing in analogix_dp_bind(),
so it should be reasonable to remove the bridge disabing and panel
unpreparing in analogix_dp_unbind().
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-8-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Uniformly, move the next bridge attachment to the Analogix side
rather than scattered on Rockchip and Exynos sides. It can also
help get rid of the callback &analogix_dp_plat_data.attach() and
make codes more concise.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-7-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Apply analogix_dp_finish_probe() in order to move the panel/bridge
parsing from Exynos side to the Analogix side.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-6-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Apply analogix_dp_finish_probe() in order to move the panel/bridge
parsing from Rockchip side to the Analogix side.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-5-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Since the panel/bridge should logically be positioned behind the
Analogix bridge in the display pipeline, it makes sense to handle
the panel/bridge parsing on the Analogix side. Therefore, we add
a new API analogix_dp_finish_probe(), which combines the panel/bridge
parsing with component addition, to do it.
In order to process component binding right after the probe completes,
the &analogix_dp_plat_data.ops is newly added to pass &component_ops,
for which the &dp_aux_ep_device_with_data.done_probing() of DP AUX bus
only supports passing &drm_dp_aux.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-4-damon.ding@rock-chips.com
[Luca: propagate 'depends on OF' to DRM_ANALOGIX_DP and reverse dependencies]
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This series cleans up some of the special user copy functions naming and
semantics. In particular, get rid of the (very traditional) double
underscore names and behavior: the whole "optimize away the range check"
model has been largely excised from the other user accessors because
it's so subtle and can be unsafe, but also because it's just not a
relevant optimization any more.
To do that, a couple of drivers that misused the "user" copies as kernel
copies in order to get non-temporal stores had to be fixed up, but that
kind of code should never have been allowed anyway.
The x86-only "nocache" version was also renamed to more accurately
reflect what it actually does.
This was all done because I looked at this code due to a report by Jann
Horn, and I just couldn't stand the inconsistent naming, the horrible
semantics, and the random misuse of these functions. This code should
probably be cleaned up further, but it's at least slightly closer to
normal semantics.
I had a more intrusive series that went even further in trying to
normalize the semantics, but that ended up hitting so many other
inconsistencies between different architectures in this area (eg
'size_t' vs 'unsigned long' vs 'int' as size arguments, and various
iovec check differences that Vasily Gorbik pointed out) that I ended up
with this more limited version that fixed the worst of the issues.
Reported-by: Jann Horn <jannh@google.com>
Tested-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/CAHk-=wgg1QVWNWG-UCFo1hx0zqrPnB3qhPzUTrWNft+MtXQXig@mail.gmail.com/
* nocache-cleanup:
x86-64/arm64/powerpc: clean up and rename __copy_from_user_flushcache
x86: rename and clean up __copy_from_user_inatomic_nocache()
x86-64: rename misleadingly named '__copy_user_nocache()' function
Initialize bridge_connector for both Rockchip and Exynos encoder sides.
Then, make DRM_BRIDGE_ATTACH_NO_CONNECTOR mandatory for Analogix bridge
side, as the private &drm_connector is no longer created.
The previous &drm_connector_funcs and &drm_connector_helper_funcs APIs
are replaced by the corresponding &drm_bridge_funcs APIs:
analogix_dp_atomic_check() -> analogix_dp_bridge_atomic_check()
analogix_dp_detect() -> analogix_dp_bridge_detect()
analogix_dp_get_modes() -> analogix_dp_bridge_get_modes()
analogix_dp_bridge_edid_read()
Additionally, the compatibilities of Analogix DP bridge based on whether
the next bridge is a 'panel'. If it is, OP_MODES and OP_DETECT are
supported; If not (the next bridge is a 'monitor' or a bridge chip),
OP_EDID and OP_DETECT are supported.
The devm_drm_bridge_add() is placed in analogix_dp_bind() instead of
analogix_dp_probe(), because the type of next bridge (the panel, monitor
or bridge chip) can only be determined after the probe process has fully
completed.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-3-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
To avoid using &analogix_dp_device.connector for compatibility
with the bridge connector framework, get &drm_connector from
&drm_atomic_state instead.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260413132551.1049307-2-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
In the event of an sm_step_remap() that leads to a partial unmap of a
transparent huge page, the new locked region required by an extended unmap
might not be a superset of the original one. Then, if it leaves a portion
of the initially requested one out, the ensuing map will trigger a warning.
Fixes: 8e7460eac7 ("drm/panthor: Support partial unmaps of huge pages")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260408191228.537625-1-adrian.larumbe@collabora.com
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
The entire crtc_state is zeroed by default, there is no need
to fiddle with crtc_state->has_pch_encoder unless we are actually
dealing with a port on the PCH (which we never are for DP MST).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260409100841.1907-2-ville.syrjala@linux.intel.com
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
The sharpness filter property is on the CRTC (as opposed to the
connector) so the expectation is that it's usable on all output
types. Since the sharpness filter is now fully integrateds into
the normal pfit code intel_pfit_compute_config() must be called
from the encoder .compute_config() on all relevant output types.
Sharpness filter is supported on LNL+ so only HDMI and DP SST/MST
outputs are actually relevant. I already took care of HDMI and
DP SST, but (as usual) forgot about DP MST. Add the missing
intel_pfit_compute_config() call to make the sharpness filter
operational on DP MST as well.
Cc: Nemesa Garg <nemesa.garg@intel.com>
Fixes: d4686f34bb ("drm/i915/pfit: Call intel_pfit_compute_config() unconditionally on (e)DP/HDMI")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260409100841.1907-1-ville.syrjala@linux.intel.com
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
If the connector is disabled, the new connector state has .crtc field
set to NULL and there is nothing more to validate after that point.
The .crtc field being NULL is not an error. Test for .crtc being NULL,
and if it is NULL, exit early with return 0.
This fixes a failure in suspend/resume path, where the connector is
already disabled, but .atomic_check is called, fails, returns -EINVAL
and blocks the suspend entry.
Fixes: aca1cbc1c9 ("drm/stm: lvds: add new STM32 LVDS Display Interface Transmitter driver")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Acked-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://patch.msgid.link/20260409024928.344010-1-marex@nabladev.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Currently our crtcs are registered in pipe order, and thus
all the for_intel_crtc*() iterators walk the crtcs in pipe
order. There are a bunch of places that more or less depend
on that. Eg. during plane updates and such we want joined
pipes to be processed back-to-back to give a better chance
of an atomic update across the whole set.
When we start to register crtcs in a different order we don't
want to change the order in which the pipes get handled.
Decouple the for_each_intel_crtc*() iterators from the crtc
registration order by using a separate list which will be
sorted by the pipe rather than the crtc index.
We could probably use a simple array or something, but that
would require some kind of extra iterator variable for the
macros, and thus would require a lot more changes. Using
a linked list keeps the fallout minimal. We can look at
using a more optimal data structure later.
I also added this extra junk to the atomic state iterators:
"(__i) = drm_crtc_index(&(crtc)->base), (void)(__i)"
even though the macro itself no longer needs the "__i" iterator.
This in case the "__i" is used by the caller, and to
avoid compiler warnings if it's completely unused now.
v2: Flip the pipe comparison (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260408155744.13326-3-ville.syrjala@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently the joiner primary->secondary hw state copy still happens from
the main compute_config loop alongside the primary uapi->hw state copy.
The primary uapi->hw state copy must therefore happen first, or else
we'll end up copying stale junk into the secondary.
We have a WARN in intel_atomic_check_joiner() to make sure the CRTCs
will be walked in the correct order. The plan is to reoder the CRTCs,
which would mess up the order, unless we also adjust the iterators
to keep the pipe order. The actual plan is to do both, so technically
we should be able to just remove the WARN and call it a day.
But relying on the iteration order like this is fragile and confusing,
so let's move the "nomodeset" joiner state copy into the later loop
where the "modeset" state copy is also done. The first loop having
completely finished, we are guaranteed to have up to date hw state
on the primary when we do the copy to the secondary.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260408155744.13326-2-ville.syrjala@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Replace @dma_addr with @pagemap_addr in the function documentation,
as @pagemap_addr is the actual name of the function argument.
Suggested-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20260410205929.3914474-6-matthew.brost@intel.com
The dma-map IOVA alloc, link, and sync APIs perform significantly better
than dma-map / dma-unmap, as they avoid costly IOMMU synchronizations.
This difference is especially noticeable when mapping a 2MB region in
4KB pages.
Use the IOVA alloc, link, and sync APIs for DRM pagemap, which create DMA
mappings between the CPU and GPU for copying data.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20260410205929.3914474-5-matthew.brost@intel.com
Split drm_pagemap_migrate_map_pages into device / system helpers clearly
seperating these operations. Will help with upcoming changes to split
IOVA allocation steps.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20260410205929.3914474-4-matthew.brost@intel.com
All current users of DRM pagemap set source_peer_migrates to true during
migration, and it is unclear whether any user would ever want to disable
this for performance reasons or for features such as compression. It is
also questionable whether this flag could be made to work with
high-speed fabric mapping APIs.
Drop the flag and make DRM pagemap unconditionally assume that
source_peer_migrates is true.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20260410205929.3914474-3-matthew.brost@intel.com
The dma-map IOVA alloc, link, and sync APIs perform significantly better
than dma-map / dma-unmap, as they avoid costly IOMMU synchronizations.
This difference is especially noticeable when mapping a 2MB region in
4KB pages.
Use the IOVA alloc, link, and sync APIs for GPU SVM, which create DMA
mappings between the CPU and GPU.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260410205929.3914474-2-matthew.brost@intel.com
Default VF scheduling configuration is the same as for the PF and
includes unlimited execution quantum (EQ) and unlimited preemption
timeout (PT). While this setup gives the most flexibility it does
not protect the PF or VFs from other VF that could constantly submit
workloads without any gaps that would let GuC do a VF-switch.
To avoid that, do some trivial auto-provisioning and configure PF
and all VFs with 16ms EQ and PT. This setup should allow GuC to
perform a full round-robin with up to 63 VFs within 2s, which in
turn should match expectations from most of the VMs using VFs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> #v1
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260402191726.4932-14-michal.wajdeczko@intel.com
We already have functions to bulk provision execution quantum and
preemption timeout, but they are applying changes to all possible
VFs, while in upcoming patch we would like to provision only subset
of available VFs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260402191726.4932-13-michal.wajdeczko@intel.com
In upcoming patches we will want to show which VFs were already
provisioned with resources other than LMEM(VRAM). Convert code
from the LMEM reporting function into a more generic helper that
can handle both u32 and u64 resources and can report also PF.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260402191726.4932-12-michal.wajdeczko@intel.com
Once we have disabled VFs there is no point in keeping potentially
limited PF scheduling provisioning as we want to complete a cleanup
of the VFs resources and return to the pure native mode, the same
as before VFs were enabled, as soon as possible.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260402191726.4932-11-michal.wajdeczko@intel.com
In upcoming patch we will need to update sched_if_idle policy when
we already hold the provisioning mutex. Split existing function
into two variants to allow that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260402191726.4932-10-michal.wajdeczko@intel.com
In addition to the hard resources (like GGTT, CTXs, DBs) we should
also check if VF was already configured (by sysfs or debugfs) with
optional parameters like execution quantum (EQ), preemption timeout
(PT) or scheduling priority (PRIO) as otherwise we might miss to
send to the GuC updated latest values after a resume or GT reset.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260402191726.4932-9-michal.wajdeczko@intel.com
After a reset we missed to reprovision VFs scheduling priority config.
But as of today, the GuC firmware allows to change scheduling priority
using config SCHED_PRIORITY KLV only for the PF and configuration of
all VFs relies on the previously applied value of the SCHED_IF_IDLE
policy. Use this policy value to check and decide whether we need to
encode VF priority KLV while reprovisioning this VF.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260402191726.4932-8-michal.wajdeczko@intel.com
There is no need to send policy updates to the GuC if policies
were not changed from the default settings (usually zero value).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260402191726.4932-7-michal.wajdeczko@intel.com
In addition to the reprovisioning of individual VFs configurations,
we should also reprovision GuC global policy settings. Note that we
already had a draft function for that but we missed to call it once
we started handling GT reset. Reuse it now but don't take extra RPM
as this is now a caller responsibility and drop unused parameter.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260402191726.4932-6-michal.wajdeczko@intel.com
Under CONFIG_DRM_XE_DEBUG_SRIOV print all policy KLVs sent to the
GuC for better diagnostics. This is similar what we are already
doing with VF configuration KLVs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260402191726.4932-5-michal.wajdeczko@intel.com
We should force change of VFs scheduling priorities only after
initial change of the SCHED_IF_IDLE policy. Doing that also during
any later policy reprovisioning will overwrite changes done on the
individual per-VF scheduling priorities (currently only for PF).
While around also move priority change code to the _config component
to maintain a proper isolation. Also document our expectation about
the GuC version where the new meaning of the policy KLV is present.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260402191726.4932-4-michal.wajdeczko@intel.com
The pf_get_sched_priority() function returns scheduling priority
that we defined as u32 so while it works we shouldn't return int.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260402191726.4932-3-michal.wajdeczko@intel.com
Starting from the GuC firmware version 70.12.0 the meaning of the
POLICY_SCHED_IF_IDLE has changed, which now acts as a bulk update
of the VF_CFG_SCHED_PRIORITY configurations of all VFs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260402191726.4932-2-michal.wajdeczko@intel.com
We only have support for G2H NO_RESPONSE_BUSY messages over MMIO,
but it turned out that GuC also uses that type of messages in CTB.
The following error was recently observed on BMG after adding VGT
policy updates to the GT restart sequence:
[] xe 0000:03:00.0: [drm] *ERROR* Tile0: GT1: G2H channel broken on read, type=3, reset required
[] xe 0000:03:00.0: [drm] *ERROR* Tile0: GT1: CT dequeue failed: -95
...
[] xe 0000:03:00.0: [drm] *ERROR* Tile0: GT1: Timed out wait for G2H, fence 21965, action 5502, done no
[] xe 0000:03:00.0: [drm] PF: Tile0: GT1: Failed to push 1 policy KLV (-ETIME)
[] xe 0000:03:00.0: [drm] Tile0: GT1: { key 0x8004 : no value } # engine_group_config
where type=3 was this unrecognized NO_RESPONSE_BUSY message.
Note that GuC might send the real RESPONSE message right after
the BUSY message, so we must be prepared to update our g2h_fence
data twice before sender actually wakes up and clears the flags.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260410110457.573-1-michal.wajdeczko@intel.com
- Drop check for changed VM in EXECBUF
- Fix refcount underflow race in intel_engine_park_heartbeat
- Do not use pipe_src as borders for SU area in PSR
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patch.msgid.link/add6fPHRC7Bc8Uri@jlahtine-mobl
drm_connector_attach_hdr_output_metadata_property() always returns zero,
since drm_object_attach_property() returns void. No caller checks the
return value, so change the return type to void.
Also fix a typo in the kerneldoc ("HDR_OUTPUT_METADA" -> "HDR_OUTPUT_METADATA").
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260330133446.3265938-2-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Replace the open coded intel_fb_needs_pot_stride_remap() check
inside intel_fb_view_init() with the real thing.
The current check doesn't have the intel_fb_uses_dpt() in there, but
that is the only situation when we use the remapped view, and thus
was always implied.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407155053.32156-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Replace the naked GTT view type checks with the new
i915_gtt_view_is_*() helpers. This isolates some of
the code from GTT view implementation details.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407155053.32156-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
I915_GTT_VIEW_ROTATED is going away and being replaced by just
I915_GTT_VIEW_REMAPPED, so we're going to need another way to
determine if the view is rotated or not (since width/height
will need to be swapped when operating on the destination
coordinate space). Provide small helper functions to hide
such implementation details from most of the code using GTT views.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407155053.32156-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We currently create a single DPT for the entire FB, so we can't
actually do the per-plane remap. Reject it for now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407155053.32156-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
