The VSP serves as an interface to memory and a compositor to the DU. It
therefore needs to be suspended after and resumed before the DU, to be
properly stopped and restarted in a controlled fashion driven by the DU
driver. This currently works by chance. Avoid relying on luck by
enforcing the correct suspend/resume ordering with device links.
Based on similar work done by Laurent Pinchart for R-Car DU.
commit db5be3a7d6 ("drm: rcar-du: Ensure correct suspend/resume
ordering with VSP")
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260330144651.817338-1-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Commit 3bce3fdd1f ("drm: rcar-du: Don't leak device_link to CMM")
refactored CMM handling, and introduced an incorrect test for CMM
availability. When no CMM is present, the rcrtc->cmm field is NULL,
testing rcrtc->cmm->dev causes a NULL pointer dereference. This slipped
through testing as all tests were run with the CMM present.
Fix this issue by correctly testing for rcrtc->cmm.
Fixes: 3bce3fdd1f ("drm: rcar-du: Don't leak device_link to CMM")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/dri-devel/CAMuHMdXomz9GFDqkBjGX9Sda_GLccPcrihvFbOz0GAitDVNTbw@mail.gmail.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260408124205.1962448-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Kconfig improvement for ethosu.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaddf9AAKCRAnX84Zoj2+
dvihAYCtQsSwH6VCpDf9bknrlqXpiUu+JlU2tSrK5plyTioCfFmdE1EhZmy7RJRo
EAFpb4ABf16BBat7a3SJ/8KYeNtoYggURn4JvNKKPMF1lSYa9PNmKQsJsfMGmHt5
IIKRgFYQXw==
=/nuD
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-04-09' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Several fixes for v3d about memory leak, runtime PM, and locking, and a
Kconfig improvement for ethosu.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260409-omniscient-tomato-coucal-edbadc@penduick
Waveshare have a serie of DSI panel kits with the DPI or LVDS panel
being attached to the DSI2DPI or DSI2LVDS bridge. The commit
46be11b678 ("drm/panel: simple: Add Waveshare 13.3" panel support")
added definitions for one of those panels, describe the rest of them.
Note, since the panels are hidden behind the bridges which are not being
programmed by the kernel, I could not confirm the pixel format for the
panels.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260331-ws-lcd-v2-4-a1add63b6eb6@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
On !x86, the pool type is never initialised, and the pages are freed
back to the system.
The test broke on the list_lru rewrite, but I'm not sure how that it was
supposed to work previously. In the meantime CI is broken so reverting
for now.
Fixes: 444e2a19d7 ("ttm/pool: port to list_lru. (v2)")
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260409142658.1511941-2-dev@lankhorst.se
On pool init we should expect the lru_count for each node to be zeroed
as per __list_lru_init -> init_one_lru, but here we are asserting the
opposite.
Currently our CI is blowing up with:
10:23:33] # ttm_device_init_pools: ASSERTION FAILED at drivers/gpu/drm/ttm/tests/ttm_device_test.c:178
[10:23:33] Expected !list_lru_count(&pt.pages) to be false, but is true
[10:23:33] [FAILED] DMA allocations, DMA32 required
[10:23:33] [PASSED] No DMA allocations, DMA32 required
[10:23:33] # ttm_device_init_pools: ASSERTION FAILED at drivers/gpu/drm/ttm/tests/ttm_device_test.c:178
[10:23:33] Expected !list_lru_count(&pt.pages) to be false, but is true
Fixes: 444e2a19d7 ("ttm/pool: port to list_lru. (v2)")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ryszard Knop <ryszard.knop@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260409121512.81298-3-matthew.auld@intel.com
Merge ACPI core driver core driver updates and assorted driver updates
related to ACPI support for 7.1-rc1:
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
Wysocki)
- Update the ACPI core device drivers to stop setting acpi_device_name()
unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
bind to platform devices instead of ACPI devices (Rafael Wysocki)
* acpi-driver:
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: AC: Define ACPI_AC_CLASS in one place
ACPI: driver: Do not set acpi_device_class() unnecessarily
ACPI: driver: Avoid using pnp.device_class for netlink handling
ACPI: event: Redefine acpi_notifier_call_chain()
ACPI: driver: Do not set acpi_device_name() unnecessarily
ACPI: video: Consolidate pnp.bus_id workarounds handling
ACPI: video: Rework checking for duplicate video bus devices
driver core: auxiliary bus: Introduce dev_is_auxiliary()
ACPI: PAD: Rearrange notify handler installation and removal
ACPI: AC: Get rid of unnecessary declarations
The function calls bitmap_or() immediately followed by bitmap_weight().
Switch to using the dedicated bitmap_weighted_or() and save one bitmap
traverse.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
There was never any documented reason for limiting SAGV to
single active pipe configuration on pre-icl. Allow SAGV
with multiple active pipes.
At least my CFL NUC seems happy with this when using
multiple displays. The machine actually has working
SAGV because the memory clock can be observed changing
via SA_PERF_STATUS/mchbar:0x5918.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260324134843.2364-10-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
skl_print_plane_wm_changes() is rather ugly with the copy-pasted
massive printk arguments. Reduce the duplication a bit by defining
a few FMT/ARG macros. Still ugly, but perhaps a bit less fragile.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260324134843.2364-9-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Verify the pre-icl NV12 Y color plane DDB entry. Thus far
we've only verified the RGB/UV DDB entry.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260324134843.2364-8-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reduce duplicated code by extracting the code to
verify a single WM level to a common function.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260324134843.2364-6-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
There are no differences between the platforms when
considering whether SAGV can be used when the pipe is
inactive or using an interlaced mode. Consolidate the
checks to common code.
Note that we weren't even checking for interlaced modes
on TGL+, but since we've previously soft defeatured
interlaced modes on TGL+ that was more or less fine.
The hardware does still have the capability though,
and in case we ever decide to resurrect it having the
check seems like a good idea.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260324134843.2364-4-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
RKL is supposed to use the old SKL/ICL method for determining
whether the watermarks tolerate SAGV or not, not the TGL+ method.
Make it so.
BSpec: 49325
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260324134843.2364-3-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
We have three ways for the platform to indicate that
SAGV is not supported:
- pcode returns zero block time
- pcode returns only a single QGV point (icl+)
- pcode rejects the SAGV enable/disable command (pre-icl)
We don't currently consider all those factors when computing
pipe_sagv_reject, meaning we might still try to enable
SAGV when we should not.
I think one plausible scenario is when pcode returns a
zero block time, and all the pipes are disabled. In
that case intel_crtc_can_enable_sagv() will return true
for all pipes, and thus we might try to enable SAGV
despite pcode indicating that it's not supported.
Make sure pipe_sagv_reject will consistently reject
SAGV when our cached block time is zero. That will cover
all the aforementioned mechanisms by which SAGV can be
disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260324134843.2364-2-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
drm_bridge_get and drm_bridge_put() do nothing when they are passed a NULL
pointer, and they do so since their initial addition in commit 30d1b37d4c
("drm/bridge: add support for refcounting").
This allows simpler code in various places when using these
functions. However it's not documented, so it's not clear whether it is
part of the API "contract" or just a current implementation detail that
might change in the future.
There is no visible reason to remove this NULL check, so document it,
making it part of the contract, letting users count on it.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260324-drm-bridge-alloc-getput-document-null-check-v1-1-fb0877c49d7e@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.
omapdss_device_init_output() can take one bridge pointer in out->bridge or
two pointers in out->bridge and out->next_bridge. Ensure each has a
corresponding drm_bridge_get() and add drm_bridge_put() calls in the
cleanup code.
Also slightly change the initial code assigning out->panel and out->bridge
to ensure and clarify that either out->panel or out->bridge is set in the
function prologue, not both. If both were set, the 'if (out->panel){...}'
code that follows would overwrite out->bridge without having put the
reference.
Finally, take a reference in case a panel_bridge is added using
drm_panel_bridge_add(). This ensures we always need to put a reference,
which came either from of_drm_find_and_get_bridge() or by the
drm_panel_bridge_add+drm_bridge_get() branch.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260402-drm-bridge-alloc-getput-drm_of_find_bridge-4-v4-4-421781c8c061@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference.
This driver has global variables for the DSI host and DSI device, and code
to allocate them on probe but no code to free them when on remove. So it
does not at all support removal, and not even multiple instances. For this
reason putting the reference would be pointless here.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260402-drm-bridge-alloc-getput-drm_of_find_bridge-4-v4-2-421781c8c061@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
For both Rockchip and Exynos sides, the struct drm_connector* is
never used in callback &analogix_dp_plat_data.attach(). After
applying drm_bridge_connector helper, this parameter will no longer
be used at all.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260409065301.446670-10-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
For Rockchip platforms, the YUV color formats are currently unsupported.
This compatibility check was previously implemented in
&analogix_dp_plat_data.get_modes().
Moving color format check to &drm_connector_helper_funcs.atomic_check()
would get rid of &analogix_dp_plat_data.get_modes() and be more
reasonable than before.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260409065301.446670-8-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
If there is neither a panel nor a bridge, the display timing can be
parsed from the display-timings node under the dp node.
In order to get rid of &analogix_dp_plat_data.get_modes() and make
the codes more consistent, apply DRM of-display-mode-bridge to parse
display timings.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260409065301.446670-6-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The &exynos_dp_device.connector is assigned in exynos_dp_bridge_attach()
but never used. It should make sense to remove it.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260409065301.446670-5-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
As suggested by Dmitry, the DRM legacy bridge driver can be pulled
out of imx/ subdir for multi-platform use. The driver is also renamed
to make it more generic and suitable for platforms other than i.MX.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260409065301.446670-3-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Since the introduction of d4433c7600 ("drm/i915/gem: Use the proto-context
to handle create parameters (v5)") it has not been possible for VM to change
after context creation so the check will never fail.
Sima's analysis:
This check was added in f7ce8639f6 ("drm/i915/gem: Split the context's
obj:vma lut into its own mutex") but without any hint in the commit
message as to why. In another hunk of that commit there's a hint though in
__eb_add_lut:
/* user racing with ctx set-vm */
This would mean that this bug was introduced in e0695db729 ("drm/i915:
Create/destroy VM (ppGTT) for use with contexts"), which allowed to change
the gem_ctx->vm at runtime, opening up the race that was partially fixed
in the earlier referenced commit about a year later.
But it cannot be exploited anymore in anything remotely recent because
with the introduction of proto-contexts we've made gem_ctx->vm invariant
again, exactly to preemptively close all these potential issues.
Specifically d4433c7600 ("drm/i915/gem: Use the proto-context to handle
create parameters (v5)") is the vm specific part of the proto-context
work.
v3:
- Include Sima's analysis and WARN_ON_ONCE
v4:
- Focus only on latest mainline codebase
References: https://lore.kernel.org/all/20260324151741.29338-1-sosohero200@gmail.com/
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patch.msgid.link/20260409053111.8914-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit f6d4afc9ec)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since the introduction of d4433c7600 ("drm/i915/gem: Use the proto-context
to handle create parameters (v5)") it has not been possible for VM to change
after context creation so the check will never fail.
Sima's analysis:
This check was added in f7ce8639f6 ("drm/i915/gem: Split the context's
obj:vma lut into its own mutex") but without any hint in the commit
message as to why. In another hunk of that commit there's a hint though in
__eb_add_lut:
/* user racing with ctx set-vm */
This would mean that this bug was introduced in e0695db729 ("drm/i915:
Create/destroy VM (ppGTT) for use with contexts"), which allowed to change
the gem_ctx->vm at runtime, opening up the race that was partially fixed
in the earlier referenced commit about a year later.
But it cannot be exploited anymore in anything remotely recent because
with the introduction of proto-contexts we've made gem_ctx->vm invariant
again, exactly to preemptively close all these potential issues.
Specifically d4433c7600 ("drm/i915/gem: Use the proto-context to handle
create parameters (v5)") is the vm specific part of the proto-context
work.
v3:
- Include Sima's analysis and WARN_ON_ONCE
v4:
- Focus only on latest mainline codebase
References: https://lore.kernel.org/all/20260324151741.29338-1-sosohero200@gmail.com/
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patch.msgid.link/20260409053111.8914-1-joonas.lahtinen@linux.intel.com
Commit 02f64b2d86 ("drm/vram: drop DRM_VRAM_MM_FILE_OPERATIONS") dropped
DRM_VRAM_MM_FILE_OPERATIONS in preference for using DEFINE_DRM_GEM_OPS.
However, it was not dropped from the kernel docs.
Use DEFINE_DRM_GEM_OPS in the illustration on how to define a
struct file_operations for such a DRM driver and remove any reference
to DRM_VRAM_MM_FILE_OPERATIONS.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 02f64b2d86 ("drm/vram: drop DRM_VRAM_MM_FILE_OPERATIONS")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260408-drm_gem_vram_helper_docs-v1-1-4d667a768f75@igalia.com
The name of the function __drm_fb_helper_initial_config_and_unlock() and
also the comment above that function make it clear that all code paths
in this function should unlock fb_helper->lock before returning. Add a
mutex_unlock() call in the only code path where it is missing. This has
been detected by the Clang thread-safety analyzer.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com> # radeon
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> # msm
Cc: Javier Martinez Canillas <javierm@redhat.com>
Fixes: 63c971af40 ("drm/fb-helper: Allocate and release fb_info in single place")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260403205355.1181984-1-bvanassche@acm.org
Instead of using the proxy intel_step.h in display, just include the
common step file directly where needed. This allows us to remove the
compat intel_step.h header.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/83b5f13b7f863b9cbc61499bcff22af5cd822a0b.1774875688.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use the shared stepping enums from include/drm/intel/step.h.
For now, define xe_step as intel_step to avoid mass renames at the same
time. For compat, we can remove the reverse macro.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/8173d9d753b343ba127d86277344248a6b1d0c3f.1774875688.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
__intel_dmc_wl_release() schedules delayed work which releases the DMC
wakelock after a fixed timeout of 50 ms. Until the delayed work runs,
the wakelock remains held and prevents entry into deeper DC states.
Reduce DMC_WAKELOCK_HOLD_TIME from 50 ms to 5 ms.
This should allow the system to enter deeper DC states sooner once MMIO
activity settles down.
Changes in v2:
- Drop detailed explanation from commit message
and keep it concise (Suraj Kandpal, Luca Coelho)
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260407105102.3730973-1-dibin.moolakadan.subrahmanian@intel.com
intel_dp_mode_min_link_bpp_x16() gives us the min bpp for the
DP link before the PCON, however intel_dp_mode_valid_downstream()
is trying to check for sufficient bandwidth on the HDMI FRL link
after the PCON. So the use of intel_dp_mode_min_link_bpp_x16() here
is incorrect.
Presumably even with FRL HDMI still can't go below 8bpc, so we should
just use that to give us the minimum required FRL bandwidth. And this
needs to account for the sink format (for 4:2:0 sub-sampling) since
that is what will be flowing over the HDMI link.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407183015.16256-1-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Nova (Core):
- Don't create intermediate (mutable) references to the whole command
queue buffer, which is potential undefined behavior.
- Add missing padding to the falcon firmware DMA buffer to prevent DMA
transfers going out of range of the DMA buffer.
- Actually set the default values in the bitfield Default
implementation.
- Use u32::from_le_bytes() instead of manual bit shifts to parse the
PCI ROM header.
- Fix a missing colon in the SEC2 boot debug message.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCadPUOQAKCRBFlHeO1qrK
LgOfAP0ccOjRYuACBcwJHsWio19SmVsuzdCjcSX3S6lPsPaaYAD/QuOLCvbKLPUz
3/8yI+jdw8FL9BfI+MI4gUVQAuehJg4=
=oEBZ
-----END PGP SIGNATURE-----
Merge tag 'drm-rust-next-2026-04-06' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
DRM Rust changes for v7.1-rc1 (2nd)
Nova (Core):
- Don't create intermediate (mutable) references to the whole command
queue buffer, which is potential undefined behavior.
- Add missing padding to the falcon firmware DMA buffer to prevent DMA
transfers going out of range of the DMA buffer.
- Actually set the default values in the bitfield Default
implementation.
- Use u32::from_le_bytes() instead of manual bit shifts to parse the
PCI ROM header.
- Fix a missing colon in the SEC2 boot debug message.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://patch.msgid.link/DHN5GMSIBKO2.2AYOLXDU4X19S@kernel.org
Initialize err = 0 in xe_tlb_inval_range_tilemask_submit to prevent a
possible uninitialized value return in the case where the tile_mask
somehow doesn't match any available tile ids.
This targets a static analysis issue.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260316162003.64643-2-jonathan.cavitt@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Renaming:
The helper function res_to_mem_region is now xe_map_resource_to_region.
Abstraction:
The patch removes instances where block->private was accessed directly
to obtain VRAM region data allowing VRAM manager to own block->private
for future use cases.
V2(MattB): Add more detail about patch also adjust variable placement
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260407055107.2782450-2-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Various substructures defined in panthor_sched.c have kernel-doc which
is silently ignored because it doesn't include the full path to the
member. Fix these issues so that the kernel-doc text is actually output
by including the name of the parent.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260408091242.799074-1-steven.price@arm.com
The sharpness filter is just a special mode of the pipe scaler.
It doesn't warrant all this special casing everywhere. Just
integrate it properly into the scaler code so that it's treated
no different from the other pipe scaler uses (scaling,centering,
YCbCr 4:2:0 output).
v2: Also reject scaling_filter vs. sharpness
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407175244.19654-10-ville.syrjala@linux.intel.com
We now have three different reasons for calling
intel_pfit_compute_config():
- actual pfit scaling/centering
- YCbCr 4:2:0 output
- sharpness filter
So let's just call intel_pfit_compute_config() unconditionally
from both the DP and HDMI code. Both gmch and ilk+ pfit code
should be capable of judging whether anything actually
needs the pfit.
The only slightly questionable thing in the gmch code is
the dithering knob, but that's only a thing on gen2/3 which
don't even have HDMI/DP outputs, and so not an issue here.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407175244.19654-9-ville.syrjala@linux.intel.com
