If *any* object of a certain WW mutex class is locked, lockdep will
consider *all* mutexes of that class as locked. Also the lock allocation
tracking code will apparently register only the address of the first
mutex of a given class locked in a sequence.
This has the odd consequence that if that first mutex is unlocked while
other mutexes of the same class remain locked and then its memory then
freed, the lock alloc tracking code will incorrectly assume that memory
is freed with a held lock in there.
For now, work around that for drm_exec by releasing the first grabbed
object lock last.
v2:
- Fix a typo (Danilo Krummrich)
- Reword the commit message a bit.
- Add a Fixes: tag
Related lock alloc tracking warning:
[ 322.660067] =========================
[ 322.660070] WARNING: held lock freed!
[ 322.660074] 6.5.0-rc7+ #155 Tainted: G U N
[ 322.660078] -------------------------
[ 322.660081] kunit_try_catch/4981 is freeing memory ffff888112adc000-ffff888112adc3ff, with a lock still held there!
[ 322.660089] ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec]
[ 322.660104] 2 locks held by kunit_try_catch/4981:
[ 322.660108] #0: ffffc9000343fe18 (reservation_ww_class_acquire){+.+.}-{0:0}, at: test_early_put+0x22f/0x490 [drm_exec_test]
[ 322.660123] #1: ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec]
[ 322.660135]
stack backtrace:
[ 322.660139] CPU: 7 PID: 4981 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ #155
[ 322.660146] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021
[ 322.660152] Call Trace:
[ 322.660155] <TASK>
[ 322.660158] dump_stack_lvl+0x57/0x90
[ 322.660164] debug_check_no_locks_freed+0x20b/0x2b0
[ 322.660172] slab_free_freelist_hook+0xa1/0x160
[ 322.660179] ? drm_exec_unlock_all+0x168/0x2a0 [drm_exec]
[ 322.660186] __kmem_cache_free+0xb2/0x290
[ 322.660192] drm_exec_unlock_all+0x168/0x2a0 [drm_exec]
[ 322.660200] drm_exec_fini+0xf/0x1c0 [drm_exec]
[ 322.660206] test_early_put+0x289/0x490 [drm_exec_test]
[ 322.660215] ? __pfx_test_early_put+0x10/0x10 [drm_exec_test]
[ 322.660222] ? __kasan_check_byte+0xf/0x40
[ 322.660227] ? __ksize+0x63/0x140
[ 322.660233] ? drmm_add_final_kfree+0x3e/0xa0 [drm]
[ 322.660289] ? _raw_spin_unlock_irqrestore+0x30/0x60
[ 322.660294] ? lockdep_hardirqs_on+0x7d/0x100
[ 322.660301] ? __pfx_kunit_try_run_case+0x10/0x10 [kunit]
[ 322.660310] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit]
[ 322.660319] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[ 322.660328] kthread+0x2e7/0x3c0
[ 322.660334] ? __pfx_kthread+0x10/0x10
[ 322.660339] ret_from_fork+0x2d/0x70
[ 322.660345] ? __pfx_kthread+0x10/0x10
[ 322.660349] ret_from_fork_asm+0x1b/0x30
[ 322.660358] </TASK>
[ 322.660818] ok 8 test_early_put
Cc: Christian König <christian.koenig@amd.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Fixes: 09593216bf ("drm: execution context for GEM buffers v7")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906095039.3320-4-thomas.hellstrom@linux.intel.com
Restrict the wait for boot loader steady state only to SMUv13.0.6. For
older SOCs, ASIC init has a longer wait period and that takes care.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two places in apply_below_the_range() where it's possible for
a divide by zero error to occur. So, to fix this make sure the divisor
is non-zero before attempting the computation in both cases.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2637
Fixes: a463b26303 ("drm/amd/display: Fix frames_to_insert math")
Fixes: ded6119e82 ("drm/amd/display: Reinstate LFC optimization")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DRM legacy gamma, AMD display manager applies implicit sRGB degamma
using a pre-defined sRGB transfer function. It works fine for DCN2
family where degamma ROM and custom curves go to the same color block.
But, on DCN3+, degamma is split into two blocks: degamma ROM for
pre-defined TFs and `gamma correction` for user/custom curves and
degamma ROM settings doesn't apply to cursor plane. To get DRM legacy
gamma working as expected, enable cursor degamma ROM for implict sRGB
degamma on HW with this configuration.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803
Fixes: 96b020e216 ("drm/amd/display: check attr flag before set cursor degamma on DCN3+")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since, calling dcn20_adjust_freesync_v_startup() on DCN3.1+ ASICs
can cause the display to flicker and underflow to occur, we shouldn't
call it for them. So, ensure that the DCN version is less than
DCN_VERSION_3_1 before calling dcn20_adjust_freesync_v_startup().
Cc: stable@vger.kernel.org
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3a31e8b89b.
We still need to call dcn20_adjust_freesync_v_startup() for older DCN3+
ASICs. Otherwise, it can cause DP to HDMI 2.1 PCONs to fail to light up.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2809
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn35/dcn35_fpu.c:260 dcn35_update_bw_bounding_box_fpu() warn: inconsistent indenting
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx_v9_4_3_ue|ce_reg_list is an array per gfx core instance
correct the settings of se_num and reg_inst for some of
gfx ras counters so all the available register instances
can be polled for ras status.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Restrict the wait for boot loader steady state only to SMUv13.0.6. For
older SOCs, ASIC init has a longer wait period and that takes care.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Show only firmware version attributes that have valid version. Hide
others.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use min_t to replace min, min_t is a bit fast because min use
twice typeof.
And using min_t is cleaner here since the min/max macros
do a typecheck while min_t()/max_t() to an explicit type cast.
Fixes the below checkpatch warning:
WARNING: min() should probably be min_t()
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only calculate pcie_index_hi for register address greater than 32bits.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add 64bits register access support on register whose address
is greater than 32bits.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This warning is for the declaration of a static array, and it is
recommended to declare it as type "static const char * const" instead of
"static const char *".
an array pointer declared as type "static const char *" can point to a
different character constant because the pointer is mutable. However, if
it is declared as type "static const char * const", the pointer will
point to an immutable character constant, preventing it from being
modified which can better ensure the safety and stability of the
program.
Fixes the below:
WARNING: static const char * array should probably be static const char * const
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
split switch statement into two and consolidate the common
code for printing most of the types of clock speeds
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use variables to remove ternary expression in print statement
and improve readability. This will help to optimize the code
duplication in the switch statement
Also Changed:
replaced single_dpm_table->count as iterator in for loops
with safer clocks_num_levels value
replaced dpm_table.value usage with local var clocks_mhz
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use variables to remove the multiple nested ternary expressions
and improve readability. This will help to optimize the code
duplication in the switch statement
Also Changed:
Modify function aldebaran_get_clk_table to void function as it
always returns 0
Use const string "attempt_string" to cut down on repetition
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace print_clock_levels with emit_clock_levels for aldebaran
* replace .print_clk_levels with .emit_clk_levels in aldebaran_ppt_funcs
* added extra parameter int *offset
* removed var size, uses arg *offset instead
* removed call to smu_cmn_get_sysfs_buf
* errors are returned to caller
* returns 0 on success
additional incidental changes
* changed type of vars i, now to remove comparing mismatch types
* renamed var s/now/cur_value/
* switch statement default now returns -EINVAL
* RAS Recovery returns -EBUSY
Based on
commit b06b48d7dd ("amdgpu/pm: Implement emit_clk_levels for navi10")
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c:288 dcn35_update_clocks() warn: inconsistent indenting
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn35/dcn35_hwseq.c:159 dcn35_init_hw() warn: inconsistent indentig
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn35/dcn35_resource.c:1877 dcn35_resource_construct() warn: inconsistent indenting
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_srv.c:355 dmub_srv_hw_setup() warn: inconsistent indenting
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c: dcn35_clk_mgr.h is included more than once.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two places in apply_below_the_range() where it's possible for
a divide by zero error to occur. So, to fix this make sure the divisor
is non-zero before attempting the computation in both cases.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2637
Fixes: a463b26303 ("drm/amd/display: Fix frames_to_insert math")
Fixes: ded6119e82 ("drm/amd/display: Reinstate LFC optimization")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/dc/dcn35/dcn35_hwseq.c: clk_mgr.h is included more than once.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/dc/dcn35/dcn35_optc.c: dcn35_optc.h is included more than once.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/dc/dcn35/dcn35_resource.c: dcn31/dcn31_dio_link_encoder.h is included more than once.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DRM legacy gamma, AMD display manager applies implicit sRGB degamma
using a pre-defined sRGB transfer function. It works fine for DCN2
family where degamma ROM and custom curves go to the same color block.
But, on DCN3+, degamma is split into two blocks: degamma ROM for
pre-defined TFs and `gamma correction` for user/custom curves and
degamma ROM settings doesn't apply to cursor plane. To get DRM legacy
gamma working as expected, enable cursor degamma ROM for implict sRGB
degamma on HW with this configuration.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803
Fixes: 96b020e216 ("drm/amd/display: check attr flag before set cursor degamma on DCN3+")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use amdgpu_gmc_vram_pa to simplify codes.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If vcn is disabled in kernel parameters, don't touch vcn,
otherwise it may cause vcn hang.
v2: delete unnecessary logs
v3: move "is_vcn_enabled" check to smu_dpm_setvcn/jpeg_enable (Evan)
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since, calling dcn20_adjust_freesync_v_startup() on DCN3.1+ ASICs
can cause the display to flicker and underflow to occur, we shouldn't
call it for them. So, ensure that the DCN version is less than
DCN_VERSION_3_1 before calling dcn20_adjust_freesync_v_startup().
Cc: stable@vger.kernel.org
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It does not make sense to compare a pointer to array element with NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 65d38262b3 ("drm/amd/display: fbc state could not reach while enable fbc")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dembskiy Igor <dii@itb.spb.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3a31e8b89b.
We still need to call dcn20_adjust_freesync_v_startup() for older DCN3+
ASICs. Otherwise, it can cause DP to HDMI 2.1 PCONs to fail to light up.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2809
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have experienced timeout issues when going through the sequence to
access C20 SRAM registers. Experimentation showed that bumping the
message bus timer threshold helped on getting display Type-C connection
on the C20 PHY to work.
While the timeout is still under investigation with the HW team, having
logic to allow forward progress (with the proper warnings) seems useful.
Thus, let's bump the threshold when a timeout is detected.
The bumped value of 0x200 pclk cycles was somewhat arbitrary - 2x the
default value. That value was successfully tested on real hardware that
was displaying timeouts otherwise.
v2:
- Reword commit message to indicate that access to C20 SRAM registers
is not direct. (Radhakrishna)
- Prefer not to use REG_FIELD_PREP() in intel_cx0_phy.c.
(Radhakrishna)
- Simplify intel_cx0_bus_check_and_bump_timer() to use a fixed bumped
value instead of progressively increasing the threshold. (Mika)
BSpec: 65156
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830121524.15101-1-gustavo.sousa@intel.com
By at least strong convention, a print-buffer's trailing newline says
"message complete, send it". The exception (no TNL, followed by a call
to pr_cont) proves the general rule.
Most DRM.debug calls already comport with this: 207 DRM_DEV_DEBUG,
1288 drm_dbg. Clean up the remainders, in maintainer sized chunks.
No functional changes.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo changed subject while pushing]
Link: https://patchwork.freedesktop.org/patch/msgid/20230903184607.272198-4-jim.cromie@gmail.com
Having conditional around the of_node pointers turns out to make driver
code use ugly #ifdef and #if blocks. So drop the conditionals.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230831080938.47454-4-biju.das.jz@bp.renesas.com
The driver has an ID table, but it uses the wrong API for retrieving match
data and that will lead to a crash, if it is instantiated by user space or
using ID. From this, there is no user for the ID table and let's drop it
from the driver as it saves some memory.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230831080938.47454-2-biju.das.jz@bp.renesas.com
Normally PSR errors detected by the panel are triggering HPD interrupt and
seen as error in dmesg. Some panels are not triggering the interrupt even
it is requested and they are detecting error. Due to this it would be good
to have possibility to check panel detected errors. Add PSR error status
into PSR sink status debugfs interface.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828083107.1520501-1-jouni.hogander@intel.com
It is irrelevant for the caller that the max lane count is being
derived from a FIA register, so having "fia" in the function name is
irrelevant. Rename the function accordingly.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230825081638.275795-5-luciano.coelho@intel.com
This makes the code a bit more symmetric and readable, especially when
we start adding more display version-specific alternatives.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230825081638.275795-4-luciano.coelho@intel.com
This function doesn't really return the pin assignment mask, but the
max lane count derived from that. So rename the function to
mtl_tc_port_get_max_lane_count() to better reflect what it really does.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230825081638.275795-2-luciano.coelho@intel.com
The driver does not call drm_bridge_attach(), which causes the next
bridge to not be added to the bridge chain. This causes the pipeline
init to fail when DRM_BRIDGE_ATTACH_NO_CONNECTOR is used.
Add the call to drm_bridge_attach().
Fixes: 30e2ae943c ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-4-c542692c6a2f@ideasonboard.com
lt8912b only calls drm_bridge_hpd_enable() if it creates a connector and
the next bridge has DRM_BRIDGE_OP_HPD set. However, when calling
drm_bridge_hpd_disable() it misses checking if a connector was created,
calling drm_bridge_hpd_disable() even if HPD was never enabled. I don't
see any issues caused by this wrong call, though.
Add the check to avoid wrongly calling drm_bridge_hpd_disable().
Fixes: 3b0a01a6a5 ("drm/bridge: lt8912b: Add hot plug detection")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-3-c542692c6a2f@ideasonboard.com