Convert the tilcdc driver to use DRM managed resources (drmm_* APIs)
to eliminate resource lifetime issues, particularly in probe deferral
scenarios.
This conversion addresses potential use-after-free bugs by ensuring
proper cleanup ordering through the DRM managed resource framework.
The changes include:
- Replace drm_crtc_init_with_planes() with drmm_crtc_alloc_with_planes()
- Replace drm_universal_plane_init() with drmm_universal_plane_alloc()
- Replace drm_simple_encoder_init() with drmm_simple_encoder_alloc()
- Remove manual cleanup in tilcdc_crtc_destroy() and error paths
- Remove drm_encoder_cleanup() from encoder error handling paths
- Use drmm_add_action_or_reset() for remaining cleanup operations
This approach is recommended by the DRM subsystem for improved resource
lifetime management and is particularly important for drivers that may
experience probe deferral.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-18-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The DRM core documentation recommends against using dev_private:
"Instead of using this pointer it is recommended that drivers use
embed the struct &drm_device in their larger per-device structure."
This patch refactors the tilcdc driver to follow this recommendation
by embedding struct drm_device within struct tilcdc_drm_private and
replacing all dev->dev_private accesses with the ddev_to_tilcdc_priv()
helper macro that uses container_of().
This change aligns the driver with modern DRM best practices.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-17-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Refactor the driver initialization to use modern DRM managed resource
APIs, simplifying the code.
The tilcdc_init and tilcdc_fini wrapper functions are removed since they
served no purpose after the component framework was eliminated. Their
logic is integrated directly into probe and remove.
Key changes:
- Use devm_drm_dev_alloc() instead of drm_dev_alloc().
- Use drmm_mode_config_init() instead of drm_mode_config_init().
- Align the remove path with the probe error path to ensure consistent
cleanup ordering in both success and failure cases.
- Adjust platform_set_drvdata() to store the private structure instead
of the drm_device, matching the new allocation pattern.
These changes reduce error-prone code while maintaining the same
functional behavior.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-16-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Move tilcdc_init/fini functions adjacent to the probe and remove functions
in preparation for cleanup and modernization. This improves readability
for subsequent commits that will refactor these functions.
No functional changes, only code reorganization.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-15-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Use the drm_module_platform_driver() helper macro to simplify driver
registration. This macro handles both the platform driver registration
and the drm_firmware_drivers_only() check, making the custom init/exit
functions unnecessary.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-14-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The tilcdc driver previously supported a sub-module system where
external display drivers (panels, encoders) could register themselves
through tilcdc_module_init() and be automatically initialized through
a module list. This infrastructure became unused after the component
framework support and panel driver was removed.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-13-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The tilcdc_external module describes the encoder part of the tilcdc
driver. Rename it to tilcdc_encoder for better clarity and to make
the naming more consistent with DRM subsystem conventions, where
encoder-related files typically use "encoder" in their names.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-12-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Remove the "external_" prefix from encoder and connector members in the
tilcdc driver. These are internal driver structures and the "external"
naming is misleading. The simpler names better reflect that these are
the primary encoder and connector managed by this driver.
Also rename tilcdc_attach_external_device() to tilcdc_encoder_create()
for consistency and to better describe the function's purpose.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-11-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The num_encoders/encoders and num_connectors/connectors arrays in
tilcdc_drm_private are never populated or used by the driver.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-10-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Remove the tilcdc_panel_info structure and its associated helper
function as the structure contains only redundant or unused parameters.
Most panel configuration parameters in tilcdc_panel_info are either:
- Already represented by existing DRM mode flags (invert_pxl_clk,
sync_edge via DRM_BUS_FLAG_*), or
- Set to identical values across all instances (panel_info_default),
making them effectively constants
The removed fifo_th field is already handled by priv->fifo_th when set.
Other removed fields (tft_alt_mode, raster_order) were always set to 0
in the only instance (panel_info_default) and thus had no effect.
This simplifies the code by eliminating unnecessary abstraction while
preserving all functional behavior.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-8-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The tilcdc driver previously used the component framework to bind
external encoder subdrivers (specifically the TDA998x HDMI encoder).
With the removal of these subdrivers in previous commits, the component
framework is no longer needed.
This commit removes all component framework infrastructure including:
- Component master operations and bind/unbind callbacks
- The is_componentized flag and conditional code paths
- tilcdc_get_external_components() and tilcdc_add_component_encoder()
- TDA998x-specific panel configuration
The driver now uses a simplified initialization path that directly
attaches external devices via the DRM bridge API, eliminating the
complexity of dual code paths for componentized vs non-componentized
configurations.
This cleanup removes approximately 140 lines of code and makes the
driver initialization flow more straightforward.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-7-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The tilcdc panel subdriver is a legacy, non-standard driver that has been
replaced by the standard panel-dpi driver and panel-simple infrastructure.
With the device tree bindings removed and all in-tree users migrated to
use panel-dpi, this driver no longer has any associated device tree
bindings or users. The panel-dpi driver combined with DRM bus flags
provides equivalent functionality in a standard way that is compatible
with the broader DRM panel ecosystem.
This removal eliminates 400+ lines of redundant code and completes the
migration to standard panel handling.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-6-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
To maintain backward compatibility while removing the deprecated
tilcdc_panel driver, add a tilcdc_panel_legacy subdriver that converts
the legacy "ti,tilcdc,panel" devicetree binding to the standard
panel-dpi binding at early boot.
The conversion uses an embedded device tree overlay that is applied and
modified during subsys_initcall. The process:
- Apply embedded overlay to create a tilcdc-panel-dpi node with
port/endpoint connections to the LCDC
- Copy all properties from the legacy panel node to the new
tilcdc-panel-dpi node
- Copy display-timings from the legacy panel
- Convert legacy panel-info properties (invert-pxl-clk, sync-edge) to
standard display timing properties (pixelclk-active, syncclk-active)
- Disable the legacy panel by removing its compatible property to
prevent the deprecated driver from binding
The result is a standard tilcdc-panel-dpi node with proper endpoints and
timing properties, allowing the DRM panel infrastructure to work with
legacy devicetrees without modification.
Other legacy panel-info properties are not migrated as they consistently
use default values across all mainline devicetrees and can be hardcoded
in the tilcdc driver.
This feature is optional via CONFIG_DRM_TILCDC_PANEL_LEGACY and should
only be enabled for systems with legacy devicetrees containing
"ti,tilcdc,panel" nodes.
Suggested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/all/1d9a9269-bfda-4d43-938b-2df6b82b9369@ideasonboard.com/
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-5-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Migrate CRTC mode configuration to use standard DRM bus flags in
preparation for removing the tilcdc_panel driver and its custom
tilcdc_panel_info structure.
Add support for DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE and
DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE flags to control pixel clock and sync
signal edge polarity, while maintaining backward compatibility with the
existing tilcdc panel info structure.
Simplify several hardware parameters by setting them to fixed defaults
based on common usage across existing device trees:
- DMA burst size: 16 (previously configurable via switch statement)
- AC bias frequency: 255 (previously panel-specific)
- FIFO DMA request delay: 128 (previously panel-specific)
These parameters show no variation in real-world usage, so hardcoding
them simplifies the driver without losing functionality.
Preserve FIFO threshold configurability by detecting the SoC type, as
this parameter varies between AM33xx (8) and DA850 (16) platforms.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-4-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The tilcdc hardware does not generate VESA-compliant sync signals. It
aligns the vertical sync (VS) on the second edge of the horizontal sync
(HS) instead of the first edge. To compensate for this hardware
behavior, the driver applies a timing adjustment in mode_fixup().
Previously, this adjustment was conditional based on the simulate_vesa_sync
flag, which was only set when using external encoders. This appears
problematic because:
1. The timing adjustment seems needed for the hardware behavior regardless
of whether an external encoder is used
2. The external encoder infrastructure is driver-specific and being
removed due to design issues
3. Boards using tilcdc without bridges (e.g., am335x-evm, am335x-evmsk)
may not be getting the necessary timing adjustments
Remove the simulate_vesa_sync flag and apply the VESA sync timing
adjustment unconditionally, ensuring consistent behavior across all
configurations. While it's unclear if the previous conditional behavior
was causing actual issues, the unconditional adjustment better reflects
the hardware's characteristics.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-3-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the MSI
interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts, which
causes device interrupts to be delivered to a single CPU. That obviously is
counterproductive for multi-queue devices and interrupt balancing.
To work around this limitation the new infrastructure installs a dummy
irq_set_affinity() callback which captures the affinity mask and picks a
redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a new
handling function in the core, which either runs the interrupt handler in
the context of the target CPU or delegates it to irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host controller
driver.
This allows affinity control for the subordinate device MSI interrupts
instead of being randomly executed on the CPU which runs the demultiplex
handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability, but
implement less than 64 address bits. This breaks on platforms where such a
device is assigned an MSI address higher than what's supported.
With the binary 64-bit flag there is no other choice than disabling 64-bit
MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and radeon
drivers to enable them on affected platforms.
- The usual small cleanups and improvements
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmmJyPsQHHRnbHhAa2Vy
bmVsLm9yZwAKCRCmGPVMDXSYocekEADAsS5FlUkFuBy6kODhl5J7b9/oqlL3IEnR
3CdOrFO716dce+Gej+Wp3T93dJ3XsfD7nCZuy99+LwUkTubmaBJXfjY9S+Ket0ID
Wc3ltiD6f3GEFB14rXN+fFG/u+OOLkaXdpbQpiTnqL4JAti9qF80D4uon28+FC/o
wc1MhqVBPbOHU9iM196ngkZuXCNVPLcnZN6PNBgIn0sxx06LcK+daY0bNGxfn5Ua
LY9SD8hN7tYlkDi42nB/ZXMrexqT9cxSqHObmPX+G/QLfXCRBtD+gyVbs+KVzpRL
hmFERTlUh9tUdcQFrjgiZP/r4N5ilzsu6w5ZpSOEsGuahFUPZWJWFFC1D8rmq/Ay
X9HKge1jqXJtbCf0pJM/kdbJKSH5S6aLP3iF37y+PqITIEIX8jIT3oVcvL9hI0BW
HFxpuJfhAVg63kMegZCO/iROTusLHUZr8iwYOM7pEiCE6fP46jPijsPffVIWvrlJ
2LVOv/A5wy9q8FW8sF9/M6CW7cdeYQF06Ce3qAyMxjZjEyR3KFBJCVWjhqyMxZJP
3zFl1XXKXgRO+CDrYKVTPIaXR5D76k/l6MnECQpq81CQyQKm2h6A9PyY+n70FfbZ
BimakUlBGCd92ZbSxzC9pAOiHo0ZoKtc5BhnsRhKVyBCmEKDazEplDuf49/OSZUE
p2kaf/PuOw==
=SCSQ
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the [PCI] MSI subsystem:
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the
MSI interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts,
which causes device interrupts to be delivered to a single CPU.
That obviously is counterproductive for multi-queue devices and
interrupt balancing.
To work around this limitation the new infrastructure installs a
dummy irq_set_affinity() callback which captures the affinity mask
and picks a redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a
new handling function in the core, which either runs the interrupt
handler in the context of the target CPU or delegates it to
irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host
controller driver.
This allows affinity control for the subordinate device MSI
interrupts instead of being randomly executed on the CPU which runs
the demultiplex handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability,
but implement less than 64 address bits. This breaks on platforms
where such a device is assigned an MSI address higher than what's
supported.
With the binary 64-bit flag there is no other choice than disabling
64-bit MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and
radeon drivers to enable them on affected platforms
- The usual small cleanups and improvements"
* tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ALSA: hda/intel: Make MSI address limit based on the device DMA limit
drm/radeon: Make MSI address limit based on the device DMA limit
PCI/MSI: Check the device specific address mask in msi_verify_entries()
PCI/MSI: Convert the boolean no_64bit_msi flag to a DMA address mask
genirq/redirect: Prevent writing MSI message on affinity change
PCI/MSI: Unmap MSI-X region on error
genirq: Update effective affinity for redirected interrupts
PCI: dwc: Enable MSI affinity support
PCI: dwc: Code cleanup
genirq: Add interrupt redirection infrastructure
genirq/msi: Correct kernel-doc in <linux/msi.h>
Toolchain and infrastructure:
- Add '__rust_helper' annotation to the C helpers.
This is needed to inline these helpers into Rust code.
- Remove imports available via the prelude, treewide.
This was possible thanks to a new lint in Klint that Gary has
implemented -- more Klint-related changes, including initial upstream
support, are coming.
- Deduplicate pin-init flags.
'kernel' crate:
- Add support for calling a function exactly once with the new
'do_once_lite!' macro (and 'OnceLite' type).
Based on this, add 'pr_*_once!' macros to print only once.
- Add 'impl_flags!' macro for defining common bitflags operations:
impl_flags!(
/// Represents multiple permissions.
#[derive(Debug, Clone, Default, Copy, PartialEq, Eq)]
pub struct Permissions(u32);
/// Represents a single permission.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Permission {
/// Read permission.
Read = 1 << 0,
/// Write permission.
Write = 1 << 1,
/// Execute permission.
Execute = 1 << 2,
}
);
let mut f: Permissions = Permission::Read | Permission::Write;
assert!(f.contains(Permission::Read));
assert!(!f.contains(Permission::Execute));
f |= Permission::Execute;
assert!(f.contains(Permission::Execute));
let f2: Permissions = Permission::Write | Permission::Execute;
assert!((f ^ f2).contains(Permission::Read));
assert!(!(f ^ f2).contains(Permission::Write));
- 'bug' module: support 'CONFIG_DEBUG_BUGVERBOSE_DETAILED' in the
'warn_on!' macro in order to show the evaluated condition alongside
the file path:
------------[ cut here ]------------
WARNING: [val == 1] linux/samples/rust/rust_minimal.rs:27 at ...
Modules linked in: rust_minimal(+)
- Add safety module with 'unsafe_precondition_assert!' macro, currently
a wrapper for 'debug_assert!', intended to mark the validation of
safety preconditions where possible:
/// # Safety
///
/// The caller must ensure that `index` is less than `N`.
unsafe fn set_unchecked(&mut self, index: usize, value: T) {
unsafe_precondition_assert!(
index < N,
"set_unchecked() requires index ({index}) < N ({N})"
);
...
}
- Add instructions to 'build_assert!' documentation requesting to
always inline functions when used with function arguments.
- 'ptr' module: replace 'build_assert!' with a 'const' one.
- 'rbtree' module: reduce unsafe blocks on pointer derefs.
- 'transmute' module: implement 'FromBytes' and 'AsBytes' for
inhabited ZSTs, and use it in Nova.
- More treewide replacements of 'c_str!' with C string literals.
'macros' crate:
- Rewrite most procedural macros ('module!', 'concat_idents!',
'#[export]', '#[vtable]', '#[kunit_tests]') to use the 'syn' parsing
library which we introduced last cycle, with better diagnostics.
This also allows to support '#[cfg]' properly in the '#[vtable]'
macro, to support arbitrary types in 'module!' macro (not just an
identifier) and to remove several custom parsing helpers we had.
- Use 'quote!' from the recently vendored 'quote' library and remove
our custom one.
The vendored one also allows us to avoid quoting '"' and '{}' inside
the template anymore and editors can now highlight it. In addition,
it improves robustness as it eliminates the need for string quoting
and escaping.
- Use 'pin_init::zeroed()' to simplify KUnit code.
'pin-init' crate:
- Rewrite all procedural macros ('[pin_]init!', '#[pin_data]',
'#[pinned_drop]', 'derive([Maybe]Zeroable)') to use the 'syn' parsing
library which we introduced last cycle, with better diagnostics.
- Implement 'InPlaceWrite' for '&'static mut MaybeUninit<T>'. This
enables users to use external allocation mechanisms such as
'static_cell'.
- Support tuple structs in 'derive([Maybe]Zeroable)'.
- Support attributes on fields in '[pin_]init!' (such as
'#[cfg(...)]').
- Add a '#[default_error(<type>)]' attribute to '[pin_]init!' to
override the default error (when no '? Error' is specified).
- Support packed structs in '[pin_]init!' with
'#[disable_initialized_field_access]'.
- Remove 'try_[pin_]init!' in favor of merging their feature
with '[pin_]init!'. Update the kernel's own 'try_[pin_]init!'
macros to use the 'default_error' attribute.
- Correct 'T: Sized' bounds to 'T: ?Sized' in the generated
'PinnedDrop' check by '#[pin_data]'.
Documentation:
- Conclude the Rust experiment.
MAINTAINERS:
- Add "RUST [RUST-ANALYZER]" entry for the rust-analyzer support. Tamir
and Jesung will take care of it. They have both been active around it
for a while. The new tree will flow through the Rust one.
- Add Gary as maintainer for "RUST [PIN-INIT]".
- Update Boqun and Tamir emails to their kernel.org accounts.
And a few other cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=en99
-----END PGP SIGNATURE-----
Merge tag 'rust-6.20-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Add '__rust_helper' annotation to the C helpers
This is needed to inline these helpers into Rust code
- Remove imports available via the prelude, treewide
This was possible thanks to a new lint in Klint that Gary has
implemented -- more Klint-related changes, including initial
upstream support, are coming
- Deduplicate pin-init flags
'kernel' crate:
- Add support for calling a function exactly once with the new
'do_once_lite!' macro (and 'OnceLite' type)
Based on this, add 'pr_*_once!' macros to print only once
- Add 'impl_flags!' macro for defining common bitflags operations:
impl_flags!(
/// Represents multiple permissions.
#[derive(Debug, Clone, Default, Copy, PartialEq, Eq)]
pub struct Permissions(u32);
/// Represents a single permission.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Permission {
/// Read permission.
Read = 1 << 0,
/// Write permission.
Write = 1 << 1,
/// Execute permission.
Execute = 1 << 2,
}
);
let mut f: Permissions = Permission::Read | Permission::Write;
assert!(f.contains(Permission::Read));
assert!(!f.contains(Permission::Execute));
f |= Permission::Execute;
assert!(f.contains(Permission::Execute));
let f2: Permissions = Permission::Write | Permission::Execute;
assert!((f ^ f2).contains(Permission::Read));
assert!(!(f ^ f2).contains(Permission::Write));
- 'bug' module: support 'CONFIG_DEBUG_BUGVERBOSE_DETAILED' in the
'warn_on!' macro in order to show the evaluated condition alongside
the file path:
------------[ cut here ]------------
WARNING: [val == 1] linux/samples/rust/rust_minimal.rs:27 at ...
Modules linked in: rust_minimal(+)
- Add safety module with 'unsafe_precondition_assert!' macro,
currently a wrapper for 'debug_assert!', intended to mark the
validation of safety preconditions where possible:
/// # Safety
///
/// The caller must ensure that `index` is less than `N`.
unsafe fn set_unchecked(&mut self, index: usize, value: T) {
unsafe_precondition_assert!(
index < N,
"set_unchecked() requires index ({index}) < N ({N})"
);
...
}
- Add instructions to 'build_assert!' documentation requesting to
always inline functions when used with function arguments
- 'ptr' module: replace 'build_assert!' with a 'const' one
- 'rbtree' module: reduce unsafe blocks on pointer derefs
- 'transmute' module: implement 'FromBytes' and 'AsBytes' for
inhabited ZSTs, and use it in Nova
- More treewide replacements of 'c_str!' with C string literals
'macros' crate:
- Rewrite most procedural macros ('module!', 'concat_idents!',
'#[export]', '#[vtable]', '#[kunit_tests]') to use the 'syn'
parsing library which we introduced last cycle, with better
diagnostics
This also allows to support '#[cfg]' properly in the '#[vtable]'
macro, to support arbitrary types in 'module!' macro (not just an
identifier) and to remove several custom parsing helpers we had
- Use 'quote!' from the recently vendored 'quote' library and remove
our custom one
The vendored one also allows us to avoid quoting '"' and '{}'
inside the template anymore and editors can now highlight it. In
addition, it improves robustness as it eliminates the need for
string quoting and escaping
- Use 'pin_init::zeroed()' to simplify KUnit code
'pin-init' crate:
- Rewrite all procedural macros ('[pin_]init!', '#[pin_data]',
'#[pinned_drop]', 'derive([Maybe]Zeroable)') to use the 'syn'
parsing library which we introduced last cycle, with better
diagnostics
- Implement 'InPlaceWrite' for '&'static mut MaybeUninit<T>'. This
enables users to use external allocation mechanisms such as
'static_cell'
- Support tuple structs in 'derive([Maybe]Zeroable)'
- Support attributes on fields in '[pin_]init!' (such as
'#[cfg(...)]')
- Add a '#[default_error(<type>)]' attribute to '[pin_]init!' to
override the default error (when no '? Error' is specified)
- Support packed structs in '[pin_]init!' with
'#[disable_initialized_field_access]'
- Remove 'try_[pin_]init!' in favor of merging their feature with
'[pin_]init!'. Update the kernel's own 'try_[pin_]init!' macros to
use the 'default_error' attribute
- Correct 'T: Sized' bounds to 'T: ?Sized' in the generated
'PinnedDrop' check by '#[pin_data]'
Documentation:
- Conclude the Rust experiment
MAINTAINERS:
- Add "RUST [RUST-ANALYZER]" entry for the rust-analyzer support.
Tamir and Jesung will take care of it. They have both been active
around it for a while. The new tree will flow through the Rust one
- Add Gary as maintainer for "RUST [PIN-INIT]"
- Update Boqun and Tamir emails to their kernel.org accounts
And a few other cleanups and improvements"
* tag 'rust-6.20-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (59 commits)
rust: safety: introduce `unsafe_precondition_assert!` macro
rust: add `impl_flags!` macro for defining common bitflag operations
rust: print: Add pr_*_once macros
rust: bug: Support DEBUG_BUGVERBOSE_DETAILED option
rust: print: Add support for calling a function exactly once
rust: kbuild: deduplicate pin-init flags
gpu: nova-core: remove imports available via prelude
rust: clk: replace `kernel::c_str!` with C-Strings
MAINTAINERS: Update my email address to @kernel.org
rust: macros: support `#[cfg]` properly in `#[vtable]` macro.
rust: kunit: use `pin_init::zeroed` instead of custom null value
rust: macros: rearrange `#[doc(hidden)]` in `module!` macro
rust: macros: allow arbitrary types to be used in `module!` macro
rust: macros: convert `#[kunit_tests]` macro to use `syn`
rust: macros: convert `concat_idents!` to use `syn`
rust: macros: convert `#[export]` to use `syn`
rust: macros: use `quote!` for `module!` macro
rust: macros: use `syn` to parse `module!` macro
rust: macros: convert `#[vtable]` macro to use `syn`
rust: macros: use `quote!` from vendored crate
...
There is a unbalanced lock/unlock to gpusvm notifier lock:
[ 931.045868] =====================================
[ 931.046509] WARNING: bad unlock balance detected!
[ 931.047149] 6.19.0-rc6+xe-**************** #9 Tainted: G U
[ 931.048150] -------------------------------------
[ 931.048790] kworker/u5:0/51 is trying to release lock (&gpusvm->notifier_lock) at:
[ 931.049801] [<ffffffffa090c0d8>] drm_gpusvm_scan_mm+0x188/0x460 [drm_gpusvm_helper]
[ 931.050802] but there are no more locks to release!
[ 931.051463]
The drm_gpusvm_notifier_unlock() sits under err_free label and the
first jump to err_free is just before calling the
drm_gpusvm_notifier_lock() causing unbalanced unlock.
Fixes: f1d08a5864 ("drm/gpusvm: Introduce a function to scan the current migration state")
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260209123433.1271053-1-maciej.patelczyk@intel.com
- Various missed __counted_by annotations (Thorsten Blum)
- Various missed -Wflex-array-member-not-at-end fixes (Gustavo A. R. Silva)
- Avoid leftover tempfiles for interrupted compile-time FORTIFY tests
(Nicolas Schier)
- Remove non-existant CONFIG_UBSAN_REPORT_FULL from docs (Stefan Wiehler)
- fortify: Use C arithmetic not FIELD_xxx() in FORTIFY_REASON defines
(David Laight)
- Add __counted_by_ptr attribute, tests, and first user (Bill Wendling,
Kees Cook)
- Update MAINTAINERS file to make hardening section not include pstore
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaYopPQAKCRA2KwveOeQk
u5QDAQDj9ygsbzLj9EtXtU3T03GTvix4Rx7RkaBAMPSDEJGhNQD+M3dP6Z2ogEMz
1Km6dAC7nTEujsVFur9BVpyEgoBjjQM=
=G1gb
-----END PGP SIGNATURE-----
Merge tag 'hardening-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"Mostly small cleanups and various scattered annotations and flex array
warning fixes that we reviewed by unlanded in other trees. Introduces
new annotation for expanding counted_by to pointer members, now that
compiler behavior between GCC and Clang has been normalized.
- Various missed __counted_by annotations (Thorsten Blum)
- Various missed -Wflex-array-member-not-at-end fixes (Gustavo A. R.
Silva)
- Avoid leftover tempfiles for interrupted compile-time FORTIFY tests
(Nicolas Schier)
- Remove non-existant CONFIG_UBSAN_REPORT_FULL from docs (Stefan
Wiehler)
- fortify: Use C arithmetic not FIELD_xxx() in FORTIFY_REASON defines
(David Laight)
- Add __counted_by_ptr attribute, tests, and first user (Bill
Wendling, Kees Cook)
- Update MAINTAINERS file to make hardening section not include
pstore"
* tag 'hardening-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
MAINTAINERS: pstore: Remove L: entry
nfp: tls: Avoid -Wflex-array-member-not-at-end warnings
carl9170: Avoid -Wflex-array-member-not-at-end warning
coredump: Use __counted_by_ptr for struct core_name::corename
lkdtm/bugs: Add __counted_by_ptr() test PTR_BOUNDS
compiler_types.h: Attributes: Add __counted_by_ptr macro
fortify: Cleanup temp file also on non-successful exit
fortify: Rename temporary file to match ignore pattern
fortify: Use C arithmetic not FIELD_xxx() in FORTIFY_REASON defines
ecryptfs: Annotate struct ecryptfs_message with __counted_by
fs/xattr: Annotate struct simple_xattr with __counted_by
crypto: af_alg - Annotate struct af_alg_iv with __counted_by
Kconfig.ubsan: Remove CONFIG_UBSAN_REPORT_FULL from documentation
drm/nouveau: fifo: Avoid -Wflex-array-member-not-at-end warning
Convert to the non-deprecated mipi_dsi_*_multi() helpers per the TODO
list. This reduces boilerplate error checking while providing proper
error accumulation.
Use mipi_dsi_msleep() and mipi_dsi_usleep_range() macros for delays.
Replace mdelay(10) and mdelay(20) with mipi_dsi_usleep_range() calls
using tighter slop (10-11ms and 20-21ms respectively) since these
functions aren't run often and don't need large timing windows.
In jdi_panel_off(), reset the error context between display_off and
enter_sleep_mode to preserve the original behavior of continuing power-down
even if display_off fails. This ensures enter_sleep_mode executes before
GPIO/regulator control, which is critical for proper power sequencing.
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260203044605.5890-1-chintanlike@gmail.com
The PSS_CHICKEN register has been part of the RCS engine's LRC since it
was first introduced in Xe_LP. That means that any workarounds that
adjust its value (such as Wa_14019988906 and Wa_14019877138) need to be
implemented in the lrc_was[] table so that they become part of the
default LRC from which all subsequent LRCs are copied. Although these
workarounds were implemented correctly on most platforms, they were
incorrectly placed on the engine_was[] table for Xe2_HPG.
Move the workarounds to the proper lrc_was[] table and switch the
'xe_rtp_match_first_render_or_compute' rule to specifically match the
RCS since that's the engine whose LRC manages the register.
Bspec: 65182
Fixes: 7f3ee7d880 ("drm/xe/xe2hpg: Add initial GT workarounds")
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://patch.msgid.link/20260205220508.51905-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The logicvc_drm_config_parse() function calls of_get_child_by_name() to
find the "layers" node but fails to release the reference, leading to a
device node reference leak.
Fix this by using the __free(device_node) cleanup attribute to automatic
release the reference when the variable goes out of scope.
Fixes: efeeaefe9b ("drm: Add support for the LogiCVC display controller")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260130-logicvc_drm-v1-1-04366463750c@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
On NVL-P, the primary GT's WOPCM gained an extra 8MiB for the Memory
URB. As such, we need to bump the maximum size in the driver so that
the driver is able to load without erroring out thinking that the WOPCM
is too small.
FIXME: The wopcm code in xe driver is a bit confusing. For the case
where the offsets for GUC WOPCM are already locked, it appears we are
using the maximum overall WOPCM size instead of the sizes relative to
each type of GT. The function __check_layout() should be checking
against the latter.
Bspec: 67090
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20260206-nvl-p-upstreaming-v3-15-636e1ad32688@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Although NVL-S and NVL-P are quite different on the GT side, they use
identical Xe3p_LPD display IP and should take all the same codepaths.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260206-nvl-p-upstreaming-v3-14-636e1ad32688@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Since the dominant size of the pages referred in an i-gpu, such as
Xe3p_LPG, will be 4KB, the HW default of mix of 64K and 2M for STLB bank
hash mode does not make sense.
Allow the SW to change it to 4KB Mode, for Xe3p_LPG.
v2:
- Add Bspec reference. (Matt)
Bspec: 78248
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260206-nvl-p-upstreaming-v3-11-636e1ad32688@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Like with previous generations, the engine context images for of both
RCS and CCS in Xe3p_LPG contain a common layout at the end for the
context related to the "Compute Pipeline".
The size of the memory area written to such section varies; it depends
on the type of preemption has taken place during the execution and type
of command streamer instruction that was used on the pipeline. For
Xe3p_LPG, the maximum possible size, including NOOPs for cache line
alignment, is 4368 dwords, which would be the case of a mid-thread
preemption during the execution of a COMPUTE_WALKER_2 instruction.
The maximum size has increased in such a way that we need to update
xe_gt_lrc_size() to match the new sizing requirement. When we add that
to the engine-specific parts, we have:
- RCS context image: 6672 dwords = 26688 bytes -> 7 pages
- CCS context image: 5024 dwords = 20096 bytes -> 5 pages
Bspec: 65182, 55793, 73590
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260206-nvl-p-upstreaming-v3-10-636e1ad32688@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Xe3p_LPG extends the 'group ID' register mask by one bit. Since the new
upper bit (12) was unused on previous platforms, we can safely extend
the existing mask size without worrying about adding conditional version
checks to the register programming.
Bspec: 67175
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20260206-nvl-p-upstreaming-v3-9-636e1ad32688@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
From Xe3p onward, the desired settings are now the hardware's
default values and the driver does not need to program them explicitly.
Since 35.xx seems to be the starting point for "Xe3p" version numbers;
we'll adjust the bounds of the old programming to stop at 34.99. Even
though there's no platform with version 35.00 at the moment, this is
simplest in case one does show up in the future.
Bspec: 72161, 59928, 59930
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20260206-nvl-p-upstreaming-v3-8-636e1ad32688@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
By default the hardware reports context switch status into the global
hardware status page. The Xe driver doesn't use this information for
anything, and as of Xe3p, leaving this setting enabled will prevent
other hardware optimizations from being enabled. Disable this reporting
as suggested by the tuning guide.
Bspec: 72161
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20260206-nvl-p-upstreaming-v3-7-636e1ad32688@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Xe3p_LPG adds some additional state instructions to the RCS engine's
LRC. Add support for these to the debugfs LRC parser.
Note that the bspec's LRC description page seems to have a few mistakes
in the name/spelling of these new instructions (e.g.,
"3DSTATE_TASK_DATA_EXT" instead of "3DSTATE_TASK_SHADER_DATA_EXT" or
"3DSTATE_VIEWPORT_STATE_POINTERS_CL_SF_2" instead of
"3DSTATE_VIEWPORT_STATE_POINTERS_SF_CLIP_2").
Bspec: 65182
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20260206-nvl-p-upstreaming-v3-6-636e1ad32688@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Xe3p_LPG has nearly identical steering to Xe2 and Xe3. The only
DSS/XeCore change from those IPs is an additional range from
0xDE00-0xDE7F that was previously reserved, so we can simply grow one of
the existing ranges in the Xe2 table to include it. Similarly, the
"instance0" table is also almost identical, but gains one additional
PSMI range and requires a separate table.
v2:
- Drop reserved range from MEMPIPE range. (Dnyaneshwar)
Bspec: 75242
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20260206-nvl-p-upstreaming-v3-5-636e1ad32688@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
PAT programming for Xe3p_LPG is more similar to Xe2 and Xe3 than it is
to Xe3p_XPC. Compared to Xe2/Xe3 we have:
* There's a slight update to the PAT table, where two new indices (18
and 19) are added to expose a new "WB - Transient App" L3 caching
mode.
* The PTA_MODE entry must be programmed differently according to the
media type, and both differ from Xe2.
There are no changes to the underlying registers, so the Xe2 ops can be
re-used for Xe3p.
Bspec: 71582, 74160
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20260206-nvl-p-upstreaming-v3-4-636e1ad32688@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Differently from currently supported platforms, in upcoming changes we
will need to have different PAT entries for PTA based on the GT type. As
such, let's prepare the code to support that by having two separate
PTA-specific members in the pat struct, one for each type of GT.
While at it, also fix the kerneldoc for pat_ats.
Co-developed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260206-nvl-p-upstreaming-v3-3-636e1ad32688@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Add Xe3p_LPG graphics IP version 35.10. Xe3p_LPG supports all features
described by XE2_GFX_FEATURES and also multi-queue feature on BCS and
CCS engines. As such, create a new struct xe_graphics_desc named
graphics_xe3p_lpg that inherits from XE2_GFX_FEATURES and also includes
the necessary .multi_queue_engine_class_mask.
Here is a list of fields and associated Bspec references for the members
of the IP descriptor:
.hw_engine_mask (Bspec 60149)
.multi_queue_engine_class_mask (Bspec 74110)
.has_asid (Bspec 71132)
.has_atomic_enable_pte_bit (Bspec 59510, 74675)
.has_indirect_ring_state (Bspec 67296)
.has_range_tlb_inval (Bspec 71126)
.has_usm (Bspec 59651)
.has_64bit_timestamp (Bspec 60318)
.num_geometry_xecore_fuse_regs (Bspec 62566, 67401, 67536)
.num_compute_xecore_fuse_regs (Bspec 62565, 62561, 67537)
v2:
- Drop non-existing fields from the list in the commit message. (Matt)
- Squash patch adding .multi_queue_engine_class_mask here. (Matt)
- Rename graphics_xe3p to graphics_xe3p_lpg. (Matt)
- Add fields .num_geometry_xecore_fuse_regs and
.num_compute_xecore_fuse_regs after rebasing and inheriting
commit 6acf3d3ed6 ("drm/xe: Move number of XeCore fuse registers to
graphics descriptor"). (Gustavo)
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260206-nvl-p-upstreaming-v3-1-636e1ad32688@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Commit c5741c5c11 ("drm/i915/display: Do not use stolen on MTL") added
some checks for MTL in overlay code. However, this is never run on
MTL. Clean it up.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260206125949.243643-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
A couple small changes:
- Validate the magic value at the head of FWCCB commands, and
- Mask off the magic value before logging unknown command types to make
them easier to interpret on sight.
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Link: https://patch.msgid.link/20260206-improve-bad-fwccb-cmd-v1-1-831a852ca127@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Ensure that the pipe BPP range is valid after calculating the minimum
and maximum pipe BPP values separately.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260209133817.395823-2-imre.deak@intel.com
The pipe BPP value shouldn't be set outside of the source's / sink's
valid pipe BPP range, ensure this when increasing the minimum pipe BPP
value to 30 due to HDR.
While at it debug print if the HDR mode was requested for a connector by
setting the corresponding HDR connector property. This indicates
if the requested HDR mode could not be enabled, since the selected
pipe BPP is below 30, due to a sink capability or link BW limit.
v2:
- Also handle the case where the sink could support the target 30 BPP
only in DSC mode due to a BW limit, but the sink doesn't support DSC
or 30 BPP as a DSC input BPP. (Chaitanya)
- Debug print the connector's HDR mode in the link config dump, to
indicate if a BPP >= 30 required by HDR couldn't be reached. (Ankit)
- Add Closes: trailer. (Ankit)
- Don't print the 30 BPP-outside of valid BPP range debug message if
the min BPP is already > 30 (and so a target BPP >= 30 required
for HDR is ensured).
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7052
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15503
Fixes: ba49a4643c ("drm/i915/dp: Set min_bpp limit to 30 in HDR mode")
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: <stable@vger.kernel.org> # v6.18+
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> # v1
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260209133817.395823-1-imre.deak@intel.com
The vc4 driver relies on a drm_private_obj, that is initialized by
allocating and initializing a state, and then passing it to
drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-14-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The MSM dpu1 driver relies on a drm_private_obj, that is initialized by
allocating and initializing a state, and then passing it to
drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-11-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The MSM mdp5 driver relies on a drm_private_obj, that is initialized by
allocating and initializing a state, and then passing it to
drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-10-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The ingenic driver relies on two drm_private_objs, that are initialized
by allocating and initializing a state, and then passing it to
drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-9-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The ARM komeda driver relies on a number of drm_private_objs, that are
initialized by allocating and initializing a state, and then passing it
to drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-8-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The DP tunnel implementation relies on a drm_private_obj, that is
initialized by allocating and initializing a state, and then passing it
to drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-6-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The DP MST implementation relies on a drm_private_obj, that is
initialized by allocating and initializing a state, and then passing it
to drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-5-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
