When running vmtest.sh inside a nested VM the running kernel may not be
installed on the filesystem at the standard /boot/ or /usr/lib/modules/
paths.
Previously, this would cause vng to fail with "does not exist" since it
could not find the kernel image. Instead, this patch uses --dry-run to
detect if the kernel is available. If not, then we fall back to the
kernel in the kernel source tree. If that fails, then we die.
This way runners, like NIPA, can use vng --run arch/x86/boot/bzImage to
setup an outer VM, and vmtest.sh will still do the right thing setting
up the inner VM.
Due to job control issues in vng, a workaround is used to prevent 'make
kselftest TARGETS=vsock' from hanging until test timeout. A PR has been
placed upstream to solve the issue in vng:
https://github.com/arighi/virtme-ng/pull/453
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260316-vsock-vmtest-autodetect-kernel-v2-1-5eec7b4831f8@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
modify_return's fmod_ret programs can override bpf_modify_return_test()'s
return value, which conflicts with get_func_ip_test when selftests run in
parallel.
Store current tgid in BSS and make modify_return hooks act only for that
tgid. For other tasks, fentry/fexit become no-ops and fmod_ret returns the
original ret.
Drop the serial-only restriction and remove the TODO comment.
Tested:
sudo ./test_progs -t modify_return
sudo ./test_progs -t get_func_ip_test
sudo ./test_progs -j$(nproc) -t modify_return
sudo ./test_progs -j$(nproc) -t get_func_ip_test
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://lore.kernel.org/r/20260313034540.255805-1-sun.jian.kdev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
perf_link creates a system-wide perf event pinned to CPU 0 (pid=-1, cpu=0)
and also pins the test thread to CPU 0. Under concurrent selftests this
can lead to cross-test interference and CPU 0 contention, making the test
flaky.
Create a per-task perf event instead (pid=0, cpu=-1) and drop CPU pinning
from burn_cpu(). Use barrier() to prevent the burn loop from being
optimized away. Drop the serial_ prefix so the test can run in parallel.
Also remove the stale TODO comment.
Tested:
./test_progs -t perf_link -vv
./test_progs -j$(nproc) -t perf_link -vv
for i in $(seq 1 50); do ./test_progs -j$(nproc) -t perf_link; done
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260305084306.283983-1-sun.jian.kdev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Donald points out that the current naive implementation using dicts
breaks if policy is recursive (child nest uses policy idx already
used by its parent).
Lean more into the NlPolicy class. This lets us "render" the policy
on demand, when user accesses it. If someone wants to do an infinite
walk that's on them :) Show policy info as attributes of the class
and use dict format to descend into sub-policies for extra neatness.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260313232047.2068518-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
STORE_FAILURES was only saved from fail(), so paths that reached dodie()
could exit without preserving failure logs.
That includes fatal hook paths such as:
POST_BUILD_DIE = 1
and ordinary failures when:
DIE_ON_FAILURE = 1
Call save_logs("fail", ...) from dodie() too so fatal failures keep the
same STORE_FAILURES artifacts as non-fatal fail() paths.
Cc: John Hawley <warthog9@eaglescrag.net>
Link: https://patch.msgid.link/20260318-ktest-fixes-v1-1-9dd94d46d84c@suse.com
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEL65usyKPHcrRDEicpmLzj2vtYEkFAmm5t3QACgkQpmLzj2vt
YEk90hAArhy85Gy5uTQwdj5TVnGIwVH5+twiOz4S0If396duQGfK3MY+c+jzW2kO
7UI2uWV4tgXJGSoK1kTuQ3IXGgUDGofbaQ15nltpibQ4c+3whcDmMRICGIA/OqCk
FmHHAV264Y5y6bapG7VvT8PLv0N+TtGV4G4LhQv90eObnRXXnc0m+H0s2IObr2py
aBJgmgFQQ3DMWddX5DMatMd6M6e+2kJHY3X/41youvbvVJoWtqrJQEKIB19HDR8o
9GkEjn4GLMPZ6hPlTJCnkRn7zfRWQ3MvUMft1kCdVtpOlqvftHoBrXvP6X1YDtPR
Hy07HkH1Jpq0zI6AYyKj7f36oasnnNCm4ZFijn2RBx2chmKEUrpz2fSJ4aS5YU81
QqhOjVR+euYL7kQ1UtoFGNwOhBHKWcJr5AezxxUNwn4SJ1bl8TGB63OEt2/1GI8/
L1PMMAgHnxUAlJui38PfeiXboUeS9bfPiJd20FnGzCghsdvk6a+W9oWz+2yhs+Fy
csm1MvcxhZZ7ugXPmscE/U6iLueaqlj42dQ+wkm6sh8aYKS+9eIlIgNpu4Q9Z//e
LZGPOjx+jDWiqqTBmXke7hGMXHNXHRbWDLWlE+Du4XS5sfKwTDRKXs+g3MWI/nVf
gHvuHuKQvrQHiAcnWH0fNJbsHaGExpWWAbb+yoWCJHJAU3vj7ek=
=1U5m
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2026031701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- various fixes dealing with (intentionally) broken devices in HID
core, logitech-hidpp and multitouch drivers (Lee Jones)
- fix for OOB in wacom driver (Benoît Sevens)
- fix for potentialy HID-bpf-induced buffer overflow in () (Benjamin
Tissoires)
- various other small fixes and device ID / quirk additions
* tag 'hid-for-linus-2026031701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Check to ensure report responses match the request
HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure
HID: bpf: prevent buffer overflow in hid_hw_request
selftests/hid: fix compilation when bpf_wq and hid_device are not exported
HID: core: Mitigate potential OOB by removing bogus memset()
HID: intel-thc-hid: Set HID_PHYS with PCI BDF
HID: appletb-kbd: add .resume method in PM
HID: logitech-hidpp: Enable MX Master 4 over bluetooth
HID: input: Add HID_BATTERY_QUIRK_DYNAMIC for Elan touchscreens
HID: input: Drop Asus UX550* touchscreen ignore battery quirks
HID: asus: add xg mobile 2022 external hardware support
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
Introduce the register!() macro to define type-safe I/O register
accesses. Refactor the IoCapable trait into a functional trait, which
simplifies I/O backends and removes the need for overloaded Io methods.
This is a stable tag for other trees to merge.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCabmm4QAKCRBFlHeO1qrK
LgW0AP91SGioag/Bcrq6htEiIDb3qECrLnJEoU4V011VnHPWGAEA2xmSZ5w1MREp
plpKOF2KeNDZ+o9zjXG4okzqzaBf2wg=
=Jrfw
-----END PGP SIGNATURE-----
Merge tag 'rust_io-7.1-rc1' into driver-core-next
Register abstraction and I/O infrastructure improvements
Introduce the register!() macro to define type-safe I/O register
accesses. Refactor the IoCapable trait into a functional trait, which
simplifies I/O backends and removes the need for overloaded Io methods.
This is a stable tag for other trees to merge.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When tests fail, the runner only printed the failure count, making
it hard to tell which tests failed without scrolling through output.
Track failed test names in an array and print them after the summary
so failures are immediately visible at the end of the run.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The new option CONFIG_CRC_ENABLE_ALL_FOR_KUNIT enables all the CRC code
that has KUnit tests, causing CONFIG_KUNIT_ALL_TESTS to enable all these
tests. Add this option to all_tests.config so that kunit.py will run
them when passed the --alltests option.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260314172224.15152-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The mount_setattr_idmapped fixture mounts a 2 MB tmpfs at /mnt and then
creates a 2 GB sparse ext4 image at /mnt/C/ext4.img. While ftruncate()
succeeds (sparse file), mkfs.ext4 needs to write actual metadata blocks
(inode tables, journal, bitmaps) which easily exceeds the 2 MB tmpfs
limit, causing ENOSPC and failing the fixture setup for all
mount_setattr_idmapped tests.
This was introduced by commit d37d4720c3 ("selftests/mount_settattr:
ensure that ext4 filesystem can be created") which increased the image
size from 2 MB to 2 GB but didn't adjust the tmpfs size.
Bump the tmpfs size to 256 MB which is sufficient for the ext4 metadata.
Fixes: d37d4720c3 ("selftests/mount_settattr: ensure that ext4 filesystem can be created")
Signed-off-by: Christian Brauner <brauner@kernel.org>
As commit bbf4a17ad9 ("ipv6: Fix ECMP sibling count mismatch when
clearing RTF_ADDRCONF") pointed out, RA routes are not elegible for ECMP
merging.
Add a test scenario mixing RA and static routes with gateway to check
that they are not getting merged.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260313124827.3945-1-fmancera@suse.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a selftest to verify that the FW mark socket option is correctly
supported and its value propagated by ovpn.
The test adds and removes nftables DROP rules based on the mark value,
and checks that the rule counter aligns with the number of lost ping
packets.
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: horms@kernel.org
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Extend the base test to verify that the correct peer-id is set in data
packet headers. This is done by capturing ping packets with tcpdump during
the initial exchange and matching the first portion of the header
against the expected sequence for every connection.
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: horms@kernel.org
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
To verify that netlink notifications are correctly emitted and contain
the expected fields, this commit uses the tools/net/ynl/pyynl/cli.py
script to create multicast listeners. These listeners record the
captured notifications to a JSON file, which is later compared to the
expected output.
Cc: linux-kselftest@vger.kernel.org
Cc: shuah@kernel.org
Cc: horms@kernel.org
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Send a netlink notification when a client updates its remote UDP
endpoint. The notification includes the new IP address, port, and scope
ID (for IPv6).
Cc: linux-kselftest@vger.kernel.org
Cc: horms@kernel.org
Cc: shuah@kernel.org
Cc: donald.hunter@gmail.com
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
mbedtls 3 installs headers and calls the shared object
differently than version 2, therefore we must now rely
on pkgconfig to fill the right C/LDFLAGS.
Moreover the mbedtls3 library expects any base64 file to
have their content on one line.
Since this change does no break older versions,
let's change the sample key file format and make mbedtls3
happy.
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: horms@kernel.org
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
After commit under Fixes debug runners in the CI hit the following:
# subprocess.TimeoutExpired: Command '['bpftrace', '-f', 'json', '-q', '-e', 'kprobe:netpoll_poll_dev { @hits = count(); } interval:s:10 { exit(); }']' timed out after 15 seconds
# # Exception| net.lib.py.ksft.KsftFailEx: bpftrace failed to run!?: {}
in netpoll_basic.py >10% of the time. Let's give bpftool more time
to start, it can take a while on a debug kernel.
Fixes: 82562972b8 ("selftests: net: pass bpftrace timeout to cmd()")
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260315160038.3187730-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for type2 drivers add function and macro for
differentiating CXL memory expanders (type 3) from CXL device
accelerators (type 2) helping drivers built from public headers
to embed struct cxl_dev_state inside a private struct.
Update type3 driver for using this same initialization.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260306164741.3796372-2-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Introduce SKIP_LLVM, SKIP_LIBBFD, and SKIP_CRYPTO build flags that let
users build bpftool without these optional dependencies.
SKIP_LLVM=1 skips LLVM even when detected. SKIP_LIBBFD=1 prevents the
libbfd JIT disassembly fallback when LLVM is absent. Together, they
produce a bpftool with no disassembly support.
SKIP_CRYPTO=1 excludes sign.c and removes the -lcrypto link dependency.
Inline stubs in main.h return errors with a clear message if signing
functions are called at runtime.
Use BPFTOOL_WITHOUT_CRYPTO (not HAVE_LIBCRYPTO_SUPPORT) as the C
define, following the BPFTOOL_WITHOUT_SKELETONS naming convention for
bpftool-internal build config, leaving HAVE_LIBCRYPTO_SUPPORT free for
proper feature detection in the future.
All three flags are propagated through the selftests Makefile to bpftool
sub-builds.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260312-b4-bpftool_build-v2-1-4c9d57133644@meta.com
Add tests that demonstrate the verifier support for deep call stacks
while still enforcing maximum stack size limits.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260316161225.128011-3-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF verifier currently enforces a call stack depth of 8 frames,
regardless of the actual stack space consumption of those frames. The
limit is necessary for static call stacks, because the bookkeeping data
structures used by the verifier when stepping into static functions
during verification only support 8 stack frames. However, this
limitation only matters for static stack frames: Global subprogs are
verified by themselves and do not require limiting the call depth.
Relax this limitation to only apply to static stack frames. Verification
now only fails when there is a sequence of 8 calls to non-global
subprogs. Calling into a global subprog resets the counter. This allows
deeper call stacks, provided all frames still fit in the stack.
The change does not increase the maximum size of the call stack, only
the maximum number of frames we can place in it.
Also change the progs/test_global_func3.c selftest to use static
functions, since with the new patch it would otherwise unexpectedly
pass verification.
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260316161225.128011-2-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test tries to setup routes which have address + offset
combinations which cross a page.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
This can happen in situations when CONFIG_HID_SUPPORT is set to no, or
some complex situations where struct bpf_wq is not exported.
So do the usual dance of hiding them before including vmlinux.h, and
then redefining them and make use of CO-RE to have the correct offsets.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603111558.KLCIxsZB-lkp@intel.com/
Fixes: fe8d561db3 ("selftests/hid: add wq test for hid_bpf_input_report()")
Cc: stable@vger.kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
- Correctly handle deeactivation of interrupts that were activated from
LRs. Since EOIcount only denotes deactivation of interrupts that
are not present in an LR, start EOIcount deactivation walk *after*
the last irq that made it into an LR.
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when
pKVM is already enabled -- not only thhis isn't possible (pKVM
will reject the call), but it is also useless: this can only
happen for a CPU that has already booted once, and the capability
will not change.
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was exposed by
the recent conversion to kmalloc_obj(); rip out all the ugliness that
led to the wart.
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR access,
float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked as
available whenever the kernel used scattered feature words for them.
- Validate _all_ GVAs, rather than just the first GVA, when processing
a range of GVAs for Hyper-V's TLB flush hypercalls.
- Fix a brown paper bug in add_atomic_switch_msr().
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu.
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel local
APIC (and AVIC is enabled at the module level).
- Update CR8 write interception when AVIC is (de)activated, to fix a bug
where the guest can run in perpetuity with the CR8 intercept enabled.
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to allow
L1 hypervisors to set FREEZE_IN_SMM. This reverts (by default) an
unintentional tightening of userspace ABI in 6.17, and provides some
amount of backwards compatibility with hypervisors who want to freeze
PMCs on VM-Entry.
- Validate the VMCS/VMCB on return to a nested guest from SMM, because
either userspace or the guest could stash invalid values in memory
and trigger the processor's consistency checks.
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being
unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end.
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite being
rather unintuitive.
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd selftest to
64 (from 8).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmmy6n8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNX7ggAhWoCG+AE6P3yrp6Mi+nRYpeRGC3q
q2IiZCn0UoCg6q3c2kgn7b/N2zLJs0Q8FZRCEp2Je+2uvptpmdp/BMEfiIU3n2/a
61z+Dydbpyc+kUmhJzUJ+aotq5FnMNmAAmqSKoc19GhAx2OQhQmBP/JOZ0P/eqLE
Is0qNBgr/Zms2ib3GFf/JT+urysL2mX47qe92HTzq1T9EEG0KleID0Jz8vYQI8Fr
I5N9+lTxagQDi8ytwOM85Cn8K7wh+CQIgzmciHcVErpAvAWkrEjrPlQltpEz2C5B
aWEcRgw46utEaAiwPQGJRW6TeoKUG0pUR3v6T90nBkjjJ1npm6gPVE6TBA==
=7nQ9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Quite a large pull request, partly due to skipping last week and
therefore having material from ~all submaintainers in this one. About
a fourth of it is a new selftest, and a couple more changes are large
in number of files touched (fixing a -Wflex-array-member-not-at-end
compiler warning) or lines changed (reformatting of a table in the API
documentation, thanks rST).
But who am I kidding---it's a lot of commits and there are a lot of
bugs being fixed here, some of them on the nastier side like the
RISC-V ones.
ARM:
- Correctly handle deactivation of interrupts that were activated
from LRs. Since EOIcount only denotes deactivation of interrupts
that are not present in an LR, start EOIcount deactivation walk
*after* the last irq that made it into an LR
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when pKVM
is already enabled -- not only thhis isn't possible (pKVM will
reject the call), but it is also useless: this can only happen for
a CPU that has already booted once, and the capability will not
change
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was
exposed by the recent conversion to kmalloc_obj(); rip out all the
ugliness that led to the wart
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR
access, float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in
kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked
as available whenever the kernel used scattered feature words for
them
- Validate _all_ GVAs, rather than just the first GVA, when
processing a range of GVAs for Hyper-V's TLB flush hypercalls
- Fix a brown paper bug in add_atomic_switch_msr()
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel
local APIC (and AVIC is enabled at the module level)
- Update CR8 write interception when AVIC is (de)activated, to fix a
bug where the guest can run in perpetuity with the CR8 intercept
enabled
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to
allow L1 hypervisors to set FREEZE_IN_SMM. This reverts (by
default) an unintentional tightening of userspace ABI in 6.17, and
provides some amount of backwards compatibility with hypervisors
who want to freeze PMCs on VM-Entry
- Validate the VMCS/VMCB on return to a nested guest from SMM,
because either userspace or the guest could stash invalid values in
memory and trigger the processor's consistency checks
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from
being unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite
being rather unintuitive
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd
selftest to 64 (from 8)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: selftests: Verify SEV+ guests can read and write EFER, CR0, CR4, and CR8
Documentation: kvm: fix formatting of the quirks table
KVM: x86: clarify leave_smm() return value
selftests: kvm: add a test that VMX validates controls on RSM
selftests: kvm: extract common functionality out of smm_test.c
KVM: SVM: check validity of VMCB controls when returning from SMM
KVM: VMX: check validity of VMCS controls when returning from SMM
KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated
KVM: SVM: Initialize AVIC VMCB fields if AVIC is enabled with in-kernel APIC
KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM
KVM: x86: Fix SRCU list traversal in kvm_fire_mask_notifiers()
KVM: VMX: Fix a wrong MSR update in add_atomic_switch_msr()
KVM: x86: hyper-v: Validate all GVAs during PV TLB flush
KVM: x86: synthesize CPUID bits only if CPU capability is set
KVM: PPC: e500: Rip out "struct tlbe_ref"
KVM: PPC: e500: Fix build error due to using kmalloc_obj() with wrong type
KVM: selftests: Increase 'maxnode' for guest_memfd tests
KVM: arm64: pkvm: Don't reprobe for ICH_VTR_EL2.TDS on CPU hotplug
KVM: arm64: vgic: Pick EOIcount deactivations from AP-list tail
KVM: arm64: Remove the redundant ISB in __kvm_at_s1e2()
...
Running a test against a reserved BAR will result in the pci-epf-test
driver returning -ENOBUFS.
Make sure that the pci_endpoint_test selftest will return skip instead of
failure or success for reserved BARs.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Tested-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260312130229.2282001-22-cassel@kernel.org
ops.cpu_acquire/release() are deprecated by commit a3f5d48222
("sched_ext: Allow scx_bpf_reenqueue_local() to be called from
anywhere") in favor of handling CPU preemption via the sched_switch
tracepoint.
In the maximal selftest, replace the cpu_acquire/release stubs with a
minimal sched_switch TP program. Attach all non-struct_ops programs
(including the new TP) via maximal__attach() after disabling auto-attach
for the maximal_ops struct_ops map, which is managed manually in run().
Apply the same fix to reload_loop, which also uses the maximal skeleton.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Direct writes to p->scx.dsq_vtime are deprecated in favor of
scx_bpf_task_set_dsq_vtime(). Update scx_simple, scx_flatcg, and
select_cpu_vtime selftest to use the new kfunc with
scale_by_task_weight_inverse().
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 795a7dfbc3 ("net: tcp: accept old ack during closing")
was fixing an old bug, add a test to make sure we won't break
this case in future kernels.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Menglong Dong <menglong8.dong@gmail.com>
Link: https://patch.msgid.link/20260313115429.3365751-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function executes a CBEQ instruction which is valid if the CPU
supports the CMPBR extension. The CBEQ branches to skip the following
UDF instruction, and no SIGILL is generated. Otherwise, it will
generate a SIGILL.
Signed-off-by: Yifan Wu <wuyifan50@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The test ensures we correctly apply the maximum advertised window limit
when rcv_nxt advances past rcv_mwnd_seq, so that the "usable window"
is properly clamped to zero rather than becoming negative.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260309-tcp_rfc7323_retract_wnd_rfc-v3-6-4c7f96b1ec69@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test verifies the sequence number checks using the maximum
advertised window sequence number when net.ipv4.tcp_shrink_window
is enabled.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260309-tcp_rfc7323_retract_wnd_rfc-v3-5-4c7f96b1ec69@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test verifies
- the sequence number checks using the maximum advertised window
sequence number and
- the logic for handling received data in tcp_data_queue()
for the cases:
1. The window is reduced to zero because of memory
2. The window grows again but still does not reach the originally
advertised window
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260309-tcp_rfc7323_retract_wnd_rfc-v3-4-4c7f96b1ec69@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, the Linux TCP implementation does not shrink the
advertised window (RFC 7323 calls this "window retraction") with the
following exceptions:
- When an incoming segment cannot be added due to the receive buffer
running out of memory. Since commit 8c670bdfa5 ("tcp: correct
handling of extreme memory squeeze") a zero window will be
advertised in this case. It turns out that reaching the required
memory pressure is easy when window scaling is in use. In the
simplest case, sending a sufficient number of segments smaller than
the scale factor to a receiver that does not read data is enough.
- Commit b650d953cd ("tcp: enforce receive buffer memory limits by
allowing the tcp window to shrink") addressed the "eating memory"
problem by introducing a sysctl knob that allows shrinking the
window before running out of memory.
However, RFC 7323 does not only state that shrinking the window is
necessary in some cases, it also formulates requirements for TCP
implementations when doing so (Section 2.4).
This commit addresses the receiver-side requirements: After retracting
the window, the peer may have a snd_nxt that lies within a previously
advertised window but is now beyond the retracted window. This means
that all incoming segments (including pure ACKs) will be rejected
until the application happens to read enough data to let the peer's
snd_nxt be in window again (which may be never).
To comply with RFC 7323, the receiver MUST honor any segment that
would have been in window for any ACK sent by the receiver and, when
window scaling is in effect, SHOULD track the maximum window sequence
number it has advertised. This patch tracks that maximum window
sequence number rcv_mwnd_seq throughout the connection and uses it in
tcp_sequence() when deciding whether a segment is acceptable.
rcv_mwnd_seq is updated together with rcv_wup and rcv_wnd in
tcp_select_window(). If we count tcp_sequence() as fast path, it is
read in the fast path. Therefore, rcv_mwnd_seq is put into rcv_wnd's
cacheline group.
The logic for handling received data in tcp_data_queue() is already
sufficient and does not need to be updated.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260309-tcp_rfc7323_retract_wnd_rfc-v3-1-4c7f96b1ec69@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix two mismatched closing comments in header include guards:
- util.h: closing comment says __SCX_TEST_H__ but the guard is
__SCX_TEST_UTIL_H__
- exit_test.h: closing comment has a spurious '#' character before
the guard name
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
After commit 860683763e ("sched_ext: Add enq_flags to
scx_bpf_dsq_move_to_local()") some of the kselftests are failing to
build:
exit.bpf.c:44:34: error: too few arguments provided to function-like macro invocation
44 | scx_bpf_dsq_move_to_local(DSQ_ID);
Update the kselftests adding the new argument to
scx_bpf_dsq_move_to_local().
Fixes: 860683763e ("sched_ext: Add enq_flags to scx_bpf_dsq_move_to_local()")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This new selftest demonstrates the improvement of bounds refinement from
the previous patch. It is inspired from a set of reg_bounds_sync inputs
generated using CBMC [1] by Shung-Hsi:
reg.smin_value=0x8000000000000002
reg.smax_value=2
reg.umin_value=2
reg.umax_value=19
reg.s32_min_value=2
reg.s32_max_value=3
reg.u32_min_value=2
reg.u32_max_value=3
reg_bounds_sync returns R=[2; 3] without the previous patch, and R=2
with it. __reg64_deduce_bounds is able to derive that u64=2, but before
the previous patch, those bounds are overwritten in
__reg_deduce_mixed_bounds using the 32bits bounds.
To arrive to these reg_bounds_sync inputs, we bound the 32bits value
first to [2; 3]. We can then upper-bound s64 without impacting u64. At
that point, the refinement to u64=2 doesn't happen because the ranges
still overlap in two points:
0 umin=2 umax=0xff..ff00..03 U64_MAX
| [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx] |
|----------------------------|------------------------------|
|xx] [xxxxxxxxxxxxxxxxxxxxxxxxxxxx|
0 smax=2 smin=0x800..02 -1
With an upper-bound check at value 19, we can reach the above inputs for
reg_bounds_sync. At that point, the refinement to u64=2 happens and
because it isn't overwritten by __reg_deduce_mixed_bounds anymore,
reg_bounds_sync returns with reg=2.
The test validates this result by including an illegal instruction in
the (dead) branch reg != 2.
Link: https://github.com/shunghsiyu/reg_bounds_sync-review/ [1]
Co-developed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/622dc51c581cd4d652fff362188b2a5f73c1fe99.1773401138.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix data races flagged by KCSAN: add missing READ_ONCE()/WRITE_ONCE()
annotations for lock-free accesses to module parameters and dsq->seq.
- Fix silent truncation of upper 32 enqueue flags (SCX_ENQ_PREEMPT and
above) when passed through the int sched_class interface.
- Documentation updates: scheduling class precedence, task ownership
state machine, example scheduler descriptions, config list cleanup.
- Selftest fix for format specifier and buffer length in
file_write_long().
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCabRyHg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGZiWAQCmUOHiGAk73p9DDn6Zyrm+o/iQm/iOinchBeUs
ZiG0bgEAn15giAnLCA5Zs6cG7PemxBH1v7ctyzTjh1VsBds0rwo=
=zXix
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix data races flagged by KCSAN: add missing READ_ONCE()/WRITE_ONCE()
annotations for lock-free accesses to module parameters and dsq->seq
- Fix silent truncation of upper 32 enqueue flags (SCX_ENQ_PREEMPT and
above) when passed through the int sched_class interface
- Documentation updates: scheduling class precedence, task ownership
state machine, example scheduler descriptions, config list cleanup
- Selftest fix for format specifier and buffer length in
file_write_long()
* tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use WRITE_ONCE() for the write side of scx_enable helper pointer
sched_ext: Fix enqueue_task_scx() truncation of upper enqueue flags
sched_ext: Documentation: Update sched-ext.rst
sched_ext: Use READ_ONCE() for scx_slice_bypass_us in scx_bypass()
sched_ext: Documentation: Mention scheduling class precedence
sched_ext: Document task ownership state machine
sched_ext: Use READ_ONCE() for lock-free reads of module param variables
sched_ext/selftests: Fix format specifier and buffer length in file_write_long()
sched_ext: Use WRITE_ONCE() for the write side of dsq->seq update
exit__load(skel) was called without checking its return value.
Every other test in the suite wraps the load call with
SCX_FAIL_IF(). Add the missing check to be consistent with the
rest of the test suite.
Fixes: a5db7817af ("sched_ext: Add selftests")
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
On powerpc, immediate load instructions are sign extended. In case
of unsigned types, arguments should be explicitly zero-extended by
the caller. For kfunc call, this needs to be handled in the JIT code.
In bpf_kfunc_call_test4(), that tests for sign-extension of signed
argument types in kfunc calls, add some additional failure checks.
And add bpf_kfunc_call_test5() to test zero-extension of unsigned
argument types in kfunc calls.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260312080113.843408-1-hbathini@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add validation for the nlctrl family, accessing family info and
dumping policies.
TAP version 13
1..4
ok 1 nl_nlctrl.getfamily_do
ok 2 nl_nlctrl.getfamily_dump
ok 3 nl_nlctrl.getpolicy_dump
ok 4 nl_nlctrl.getpolicy_by_op
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://patch.msgid.link/20260311032839.417748-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add "do no harm" testing of EFER, CR0, CR4, and CR8 for SEV+ guests to
verify that the guest can read and write the registers, without hitting
e.g. a #VC on SEV-ES guests due to KVM incorrectly trying to intercept a
register.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260310211841.2552361-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add two new tests that verify inotify events are sent when memcg files
or directories are removed with rmdir.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260225223404.783173-4-tjmercier@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add tests for mounting beneath the rootfs using MOVE_MOUNT_BENEATH:
- beneath_rootfs_success: mount beneath /, fchdir, chroot, umount2
MNT_DETACH -- verify root changed
- beneath_rootfs_old_root_stacked: after mount-beneath, verify old root
parent is clone via statmount
- beneath_rootfs_in_chroot_fail: chroot into subdir of same mount,
mount-beneath fails (dentry != mnt_root)
- beneath_rootfs_in_chroot_success: chroot into separate tmpfs mount,
mount-beneath succeeds
- beneath_rootfs_locked_transfer: in user+mount ns: mount-beneath
rootfs succeeds, MNT_LOCKED transfers, old root unmountable
- beneath_rootfs_locked_containment: in user+mount ns: after full
root-switch workflow, new root is MNT_LOCKED (containment preserved)
- beneath_non_rootfs_locked_transfer: mounts created before
unshare(CLONE_NEWUSER | CLONE_NEWNS) become locked; mount-beneath
transfers MNT_LOCKED, displaced mount can be unmounted
- beneath_non_rootfs_locked_containment: same setup, verify new mount
is MNT_LOCKED (containment preserved)
Link: https://patch.msgid.link/20260224-work-mount-beneath-rootfs-v1-3-8c58bf08488f@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a test suite for the CLONE_EMPTY_MNTNS flag exercising the empty
mount namespace functionality through the clone3() syscall.
The clone3() code path is distinct from the unshare() path already
tested in empty_mntns_test.c. With clone3(), CLONE_EMPTY_MNTNS
(0x400000000ULL) is a 64-bit flag that implies CLONE_NEWNS. The
implication happens in kernel_clone() before copy_process(), unlike
unshare() where it goes through UNSHARE_EMPTY_MNTNS to
CLONE_EMPTY_MNTNS conversion in unshare_nsproxy_namespaces().
The tests cover:
- basic functionality: clone3 child gets empty mount namespace with
exactly one mount, root and cwd point to the same mount
- CLONE_NEWNS implication: CLONE_EMPTY_MNTNS works without explicit
CLONE_NEWNS, also works with redundant CLONE_NEWNS
- flag interactions: combines correctly with CLONE_NEWUSER,
CLONE_NEWPID, CLONE_NEWUTS, CLONE_NEWIPC, CLONE_PIDFD
- mutual exclusion: CLONE_EMPTY_MNTNS | CLONE_FS returns EINVAL
because the implied CLONE_NEWNS conflicts with CLONE_FS
- error paths: EPERM without capabilities, unknown 64-bit flags
rejected
- parent isolation: parent mount namespace is unchanged after clone
- many parent mounts: child still gets exactly one mount
- mount properties: root mount is nullfs, is its own parent, is the
only listmount entry
- overmount workflow: child can mount tmpfs over nullfs root to build
a writable filesystem from scratch
- repeated clone3: each child gets a distinct mount namespace
- setns: parent can join child's empty mount namespace via setns()
- regression: plain CLONE_NEWNS via clone3 still copies the full
mount tree
Link: https://patch.msgid.link/20260306-work-empty-mntns-consolidated-v1-3-6eb30529bbb0@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a test suite for the UNSHARE_EMPTY_MNTNS and CLONE_EMPTY_MNTNS
flags exercising the empty mount namespace functionality through the
kselftest harness.
The tests cover:
- basic functionality: unshare succeeds, exactly one mount exists in
the new namespace, root and cwd point to the same mount
- flag interactions: UNSHARE_EMPTY_MNTNS works standalone without
explicit CLONE_NEWNS, combines correctly with CLONE_NEWUSER and
other namespace flags (CLONE_NEWUTS, CLONE_NEWIPC)
- edge cases: EPERM without capabilities, works from a user namespace,
many source mounts still result in one mount, cwd on a different
mount gets reset to root
- error paths: invalid flags return EINVAL
- regression: plain CLONE_NEWNS still copies the full mount tree,
other namespace unshares are unaffected
- mount properties: the root mount has the expected statmount
properties, is its own parent, and is the only entry returned by
listmount
- repeated unshare: consecutive UNSHARE_EMPTY_MNTNS calls each
produce a new namespace with a distinct mount ID
- overmount workflow: verifies the intended usage pattern of creating
an empty mount namespace with a nullfs root and then mounting tmpfs
over it to build a writable filesystem from scratch
Link: https://patch.msgid.link/20260306-work-empty-mntns-consolidated-v1-2-6eb30529bbb0@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>