LOG_FILE is expanded immediately after the config file is parsed with
eval_option(..., -1). That uses the default context, not the same option
resolution path used for tests. If LOG_FILE depends on options that are
finalized per test, it can be resolved from stale values before the first
test starts.
Resolve LOG_FILE through set_test_option("LOG_FILE", 1) instead so it uses
the same expansion rules as the rest of the test options.
Cc: John Hawley <warthog9@eaglescrag.net>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Fernando Fernandez Mancera <fmancera@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Link: https://patch.msgid.link/20260307-ktest-fixes-v1-2-565d412f4925@suse.com
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
check_buildlog() probes $warnings_file with -f even when WARNINGS_FILE is
not configured. Perl warns about the uninitialized value and adds noise to
the test log, which can hide the output we actually care about.
Check that WARNINGS_FILE is defined before testing whether the file exists.
Cc: John Hawley <warthog9@eaglescrag.net>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Fernando Fernandez Mancera <fmancera@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Link: https://patch.msgid.link/20260307-ktest-fixes-v1-1-565d412f4925@suse.com
Fixes: 4283b169ab ("ktest: Add make_warnings_file and process full warnings")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix a regression in RCU torture test pre-defined scenarios caused by
commit 7dadeaa6e8 ("sched: Further restrict the preemption modes")
which limits PREEMPT_NONE to architectures that do not support
preemption at all and PREEMPT_VOLUNTARY to those architectures that do
not yet have PREEMPT_LAZY support. Since major architectures (e.g. x86
and arm64) no longer support CONFIG_PREEMPT_NONE and
CONFIG_PREEMPT_VOLUNTARY, using them in rcutorture, rcuscale, refscale,
and scftorture pre-defined scenarios causes config checking errors.
Hence switch these kconfigs to PREEMPT_LAZY.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCAAvFiEEj5IosQTPz8XU1wRHSXnow7UH+rgFAmmsZu0RHGJvcXVuQGtl
cm5lbC5vcmcACgkQSXnow7UH+rgNWwgAn1bIWDIWQR9CkRQ0grhdO+pPfLusbVg/
Y7H3SsdEX03meSunA/IVGejP6Qbanuab9nyHdv3WxxowpCGYBaLFPvklSfcBWYeZ
4lxi6Fj+2rrzvOnQ54Pk5i4v5VayxEo12XBIgx6HDV7+5LgWk0gU0LpWPUhEWYYR
z/zJ/XbcLr8e9tZVwAWZj/ShLUH301razC2SaR/OlS93zqRG9Sd251Knjqq/lEwI
T6RZfhT2Wz3bgqU3QcjxDWw5dhB0/Y9wKoJjx4bB9m8lnSt+o96gH40TO+lnllnS
T4OHjqK1J1fUXNLzQufyfKKAiwi/LBBc9H4pe4tiLFxg0fg5s21flQ==
=NBys
-----END PGP SIGNATURE-----
Merge tag 'rcu-fixes.v7.0-20260307a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU selftest fixes from Boqun Feng:
"Fix a regression in RCU torture test pre-defined scenarios caused by
commit 7dadeaa6e8 ("sched: Further restrict the preemption modes")
which limits PREEMPT_NONE to architectures that do not support
preemption at all and PREEMPT_VOLUNTARY to those architectures that do
not yet have PREEMPT_LAZY support.
Since major architectures (e.g. x86 and arm64) no longer support
CONFIG_PREEMPT_NONE and CONFIG_PREEMPT_VOLUNTARY, using them in
rcutorture, rcuscale, refscale, and scftorture pre-defined scenarios
causes config checking errors.
Switch these kconfigs to PREEMPT_LAZY"
* tag 'rcu-fixes.v7.0-20260307a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
scftorture: Update due to x86 not supporting none/voluntary preemption
refscale: Update due to x86 not supporting none/voluntary preemption
rcuscale: Update due to x86 not supporting none/voluntary preemption
rcutorture: Update due to x86 not supporting none/voluntary preemption
The "|| echo -lzstd" default makes zstd an unconditional link
dependency of resolve_btfids. On systems where libzstd-dev is not
installed and pkg-config fails, the linker fails:
ld: cannot find -lzstd: No such file or directory
libzstd is a transitive dependency of libelf, so the -lzstd flag is
strictly necessary only for static builds [1].
Remove ZSTD_LIBS variable, and instead set LIBELF_LIBS depending on
whether the build is static or not. Use $(HOSTPKG_CONFIG) as primary
source of the flags list.
Also add a default value for HOSTPKG_CONFIG in case it's not built via
the toplevel Makefile. Pass it from selftests/bpf too.
[1] https://lore.kernel.org/bpf/4ff82800-2daa-4b9f-95a9-6f512859ee70@linux.dev/
Reported-by: BPF CI Bot (Claude Opus 4.6) <bot+bpf-ci@kernel.org>
Reported-by: Vitaly Chikunov <vt@altlinux.org>
Closes: https://lore.kernel.org/bpf/aaWqMcK-2AQw5dx8@altlinux.org/
Fixes: 4021848a90 ("selftests/bpf: Pass through build flags to bpftool and resolve_btfids")
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Reviewed-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260305014730.3123382-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test for the scenario described in the previous commit:
an iterator loop with two paths where one ties r2/r7 via
shared scalar id and skips a call, while the other goes
through the call. Precision marks from the linked registers
get spuriously propagated to the call path via
propagate_precision(), hitting "backtracking call unexpected
regs" in backtrack_insn().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-linked-regs-and-propagate-precision-v1-2-18e859be570d@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix an inconsistency between func_states_equal() and
collect_linked_regs():
- regsafe() uses check_ids() to verify that cached and current states
have identical register id mapping.
- func_states_equal() calls regsafe() only for registers computed as
live by compute_live_registers().
- clean_live_states() is supposed to remove dead registers from cached
states, but it can skip states belonging to an iterator-based loop.
- collect_linked_regs() collects all registers sharing the same id,
ignoring the marks computed by compute_live_registers().
Linked registers are stored in the state's jump history.
- backtrack_insn() marks all linked registers for an instruction
as precise whenever one of the linked registers is precise.
The above might lead to a scenario:
- There is an instruction I with register rY known to be dead at I.
- Instruction I is reached via two paths: first A, then B.
- On path A:
- There is an id link between registers rX and rY.
- Checkpoint C is created at I.
- Linked register set {rX, rY} is saved to the jump history.
- rX is marked as precise at I, causing both rX and rY
to be marked precise at C.
- On path B:
- There is no id link between registers rX and rY,
otherwise register states are sub-states of those in C.
- Because rY is dead at I, check_ids() returns true.
- Current state is considered equal to checkpoint C,
propagate_precision() propagates spurious precision
mark for register rY along the path B.
- Depending on a program, this might hit verifier_bug()
in the backtrack_insn(), e.g. if rY ∈ [r1..r5]
and backtrack_insn() spots a function call.
The reproducer program is in the next patch.
This was hit by sched_ext scx_lavd scheduler code.
Changes in tests:
- verifier_scalar_ids.c selftests need modification to preserve
some registers as live for __msg() checks.
- exceptions_assert.c adjusted to match changes in the verifier log,
R0 is dead after conditional instruction and thus does not get
range.
- precise.c adjusted to match changes in the verifier log, register r9
is dead after comparison and it's range is not important for test.
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Fixes: 0fb3cf6110 ("bpf: use register liveness information for func_states_equal")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-linked-regs-and-propagate-precision-v1-1-18e859be570d@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix kexec/hibernation hang due to bogus read-only mappings.
- Fix sparse warnings in our cmpxchg() implementation.
- Prevent runtime-const being used in modules, just like x86.
- Fix broken elision of access flag modifications for contiguous entries
on systems without support for hardware updates.
- Fix a broken SVE selftest that was testing the wrong instruction.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmmrH5wQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLiWB/40+A3Q3gz9VB3obupFeC/s688TjGMwLbIO
m03Qu/ulGwBZaPRPZxsxnr8pFZKjSple5NJiHv5kQ/wR4Cfc4zwF2zOSdRvAI/c3
qPT2YL0CcVt0OgbWd2VCjiThTuFREewdCqRWbmkDaPYd27k0KWY14gHHpriRw7XM
QY0OOz8wrWi3lg2Wyvub9wWLkyjKtFlrkwZaACD5D90k/CwKVgncC1z4vh41hQxk
qjxdygNJt2sV+31+F7QMoY/rbyVnUkdSvWSwe9z2Bs9mwebaoGgx4c1l47Wq+oQD
NiVgHOZnPQkDgd2MWkUiCwzAr6C3B0aF2BCu+NTgILkbX7PyG792
=knFu
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main changes are a fix to the way in which we manage the access
flag setting for mappings using the contiguous bit and a fix for a
hang on the kexec/hibernation path.
Summary:
- Fix kexec/hibernation hang due to bogus read-only mappings
- Fix sparse warnings in our cmpxchg() implementation
- Prevent runtime-const being used in modules, just like x86
- Fix broken elision of access flag modifications for contiguous
entries on systems without support for hardware updates
- Fix a broken SVE selftest that was testing the wrong instruction"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
selftest/arm64: Fix sve2p1_sigill() to hwcap test
arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults
arm64: make runtime const not usable by modules
arm64: mm: Add PTE_DIRTY back to PAGE_KERNEL* to fix kexec/hibernation
arm64: Silence sparse warnings caused by the type casting in (cmp)xchg
The pmtu.sh kselftest configures OVS using ovs-dpctl.py and falls back
to ovs-vsctl only when ovs-dpctl.py fails. However, ovs-dpctl.py exits
with a success status when the installed pyroute2 package version is
lower than 0.6, even though the OVS datapath is not configured.
As a result, pmtu.sh assumes that the setup was successful and
continues running the test, which later fails due to the missing
OVS configuration.
Fix the exit code handling in ovs-dpctl.py so that pmtu.sh can detect
that the setup did not complete successfully and fall back to
ovs-vsctl.
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260306000127.519064-3-aleksey.oladko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two test cases for signed/unsigned 32-bit bounds refinement
when s32 range crosses the sign boundary:
- s32 range [S32_MIN..1] overlapping with u32 range [3..U32_MAX],
s32 range tail before sign boundary overlaps with u32 range.
- s32 range [-3..5] overlapping with u32 range [0..S32_MIN+3],
s32 range head after the sign boundary overlaps with u32 range.
This covers both branches added in the __reg32_deduce_bounds().
Also, crossing_32_bit_signed_boundary_2() no longer triggers invariant
violations.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-bpf-32-bit-range-overflow-v3-2-f7f67e060a6b@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Same as in __reg64_deduce_bounds(), refine s32/u32 ranges
in __reg32_deduce_bounds() in the following situations:
- s32 range crosses U32_MAX/0 boundary, positive part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxx s32 range xxxxxxxxx] [xxxxxxx|
0 S32_MAX S32_MIN -1
- s32 range crosses U32_MAX/0 boundary, negative part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxxxxxx] [xxxxxxxxxxxx s32 range |
0 S32_MAX S32_MIN -1
- No refinement if ranges overlap in two intervals.
This helps for e.g. consider the following program:
call %[bpf_get_prandom_u32];
w0 &= 0xffffffff;
if w0 < 0x3 goto 1f; // on fall-through u32 range [3..U32_MAX]
if w0 s> 0x1 goto 1f; // on fall-through s32 range [S32_MIN..1]
if w0 s< 0x0 goto 1f; // range can be narrowed to [S32_MIN..-1]
r10 = 0;
1: ...;
The reg_bounds.c selftest is updated to incorporate identical logic,
refinement based on non-overflowing range halves:
((x ∩ [0, smax]) ∩ (y ∩ [0, smax])) ∪
((x ∩ [smin,-1]) ∩ (y ∩ [smin,-1]))
Reported-by: Andrea Righi <arighi@nvidia.com>
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Closes: https://lore.kernel.org/bpf/aakqucg4vcujVwif@gpd4/T/
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-bpf-32-bit-range-overflow-v3-1-f7f67e060a6b@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Several forwarding tests (e.g., gre_multipath.sh) initialize both IPv4
and IPv6 addresses using simple_if_init, but only clean up IPv4
in simple_if_fini. This leaves stale IPv6 addresses on the interfaces,
which causes subsequent tests to fail when they encounter unexpected
address configuration.
The issue can be reproduced by running tests in sequence:
# run_kselftest.sh -t net/forwarding:ipip_hier_gre.sh
# run_kselftest.sh -t net/forwarding:min_max_mtu.sh
TAP version 13
1..1
# timeout set to 0
# selftests: net/forwarding: min_max_mtu.sh
# TEST: ping [ OK ]
# TEST: ping6 [ OK ]
# TEST: Test maximum MTU configuration [ OK ]
# TEST: Test traffic, packet size is maximum MTU [FAIL]
# Ping6, packet size: 65487 succeeded, but should have failed
# TEST: Test minimum MTU configuration [ OK ]
# TEST: Test traffic, packet size is minimum MTU [ OK ]
not ok 1 selftests: net/forwarding: min_max_mtu.sh # exit=1
Fix this by removing the unused IPv6 argument from simple_if_init in
tests that don't use IPv6 (gre_multipath.sh, ipip_lib.sh), and by
adding the missing IPv6 argument to simple_if_fini in tests that
use IPv6 (gre_multipath_nh.sh, gre_multipath_nh_res.sh).
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260305211000.515301-1-aleksey.oladko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The large chunks test does a probe run of iou-zcrx before it runs the
actual test. After the probe run finishes, the context will still exist
until the deferred io_uring teardown. When running iou-zcrx the second
time, io_uring_register_ifq() can return -EEXIST due to the existence of
the old context.
The fix is simple: wait for the context teardown using the new
mp_clear_wait() utility before running the second instance of iou-zcrx.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20260305080446.897628-2-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a basic ping test using NetDrvContEnv that sets up a netkit pair,
with one end in a netns. Use LOCAL_PREFIX_V6 and nk_forward BPF program
to ping from a remote host to the netkit in netns.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260305181803.2912736-5-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an env NetDrvContEnv for container based selftests. This automates
the setup of a netns, netkit pair with one inside the netns, and a BPF
program that forwards skbs from the NETIF host inside the container.
Currently only netkit is used, but other virtual netdevs e.g. veth can
be used too.
Expect netkit container datapath selftests to have a publicly routable
IP prefix to assign to netkit in a container, such that packets will
land on eth0. The BPF skb forward program will then forward such packets
from the host netns to the container netns.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260305181803.2912736-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add nk_forward.bpf.c, a BPF program that forwards skbs matching some IPv6
prefix received on eth0 ifindex to a specified netkit ifindex. This will
be needed by netkit container tests.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260305181803.2912736-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kunit:
- Fixes rust warnings when CONFIG_PRINTK is disabled.
- Reduces stack usage in kunit_run_tests() to fix warnings when
CONFIG_FRAME_WARN is set to a relatively low value.
- Updates email address for David Gow.
kunit tool:
- Copies caller args in run_kernel to prevent mutation.
-----BEGIN PGP SIGNATURE-----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=j8w0
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-fixes-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
- Fix rust warnings when CONFIG_PRINTK is disabled
- Reduce stack usage in kunit_run_tests() to fix warnings when
CONFIG_FRAME_WARN is set to a relatively low value
- Update email address for David Gow
- Copy caller args in kunit tool in run_kernel to prevent mutation
* tag 'linux_kselftest-kunit-fixes-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: reduce stack usage in kunit_run_tests()
kunit: tool: copy caller args in run_kernel to prevent mutation
rust: kunit: fix warning when !CONFIG_PRINTK
MAINTAINERS: Update email address for David Gow
This is basically the inverse case of commit 474eecc882
("selftests: livepatch: test if ftrace can trace a livepatched function")
but ensuring that livepatch would work on a traced function.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/20260220-lp-test-trace-v1-1-4b6703cd01a6@suse.com
[pmladek: Fixed a typo found by Joe.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
The FEAT_SVE2p1 is indicated by ID_AA64ZFR0_EL1.SVEver. However,
the BFADD requires the FEAT_SVE_B16B16, which is indicated by
ID_AA64ZFR0_EL1.B16B16. This could cause the test to incorrectly
fail on a CPU that supports FEAT_SVE2.1 but not FEAT_SVE_B16B16.
LD1Q Gather load quadwords which is decoded from SVE encodings and
implied by FEAT_SVE2p1.
Fixes: c5195b027d ("kselftest/arm64: Add SVE 2.1 to hwcap test")
Signed-off-by: Yifan Wu <wuyifan50@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Extend existing kprobe_multi_test subtests to validate the
kprobe.session exact function name optimization:
In kprobe_multi_session.c, add test_kprobe_syms which attaches a
kprobe.session program to an exact function name (bpf_fentry_test1)
exercising the fast syms[] path that bypasses kallsyms parsing. It
calls session_check() so bpf_fentry_test1 is hit by both the wildcard
and exact probes, and test_session_skel_api validates
kprobe_session_result[0] == 4 (entry + return from each probe).
In test_attach_api_fails, add fail_7 and fail_8 verifying error code
consistency between the wildcard pattern path (slow, parses kallsyms)
and the exact function name path (fast, uses syms[] array). Both
paths must return -ENOENT for non-existent functions.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260302200837.317907-4-andrey.grodzovsky@crowdstrike.com
The perf_event subtest relies on SW_CPU_CLOCK sampling to trigger the BPF
program, but the current CPU burn loop can be too short on slower systems
and may fail to generate any overflow sample. This leaves pe_res unchanged
and makes the test flaky.
Make burn_cpu() take a loop count and use a longer burn only for the
perf_event subtest. Also scope perf_event_open() to the current task to
avoid wasting samples on unrelated activity.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260228074555.122950-3-sun.jian.kdev@gmail.com
The kprobe_multi subtests rely on bpf_testmod fentry ksyms.
When bpf_testmod isn't available, libbpf fails to resolve
bpf_testmod_fentry_test* and skeleton load fails with -ESRCH, causing
false failures.
Skip these subtests when env.has_testmod is false.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260228074555.122950-2-sun.jian.kdev@gmail.com
Add a test that verifies btf__add_btf() correctly handles merging
multiple split BTF objects that share the same base BTF. The test
creates two sibling split BTFs on a common base, merges them into
a combined split BTF, and validates that base type references are
preserved while split type references are properly remapped.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/64a8c947bff1ae89efa9ba8c099466477762490f.1772657690.git.josef@toxicpanda.com
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such scftorture scenarios
to CONFIG_PREEMPT_LAZY.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260303235903.1967409-4-paulmck@kernel.org
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such refscale scenarios
to CONFIG_PREEMPT_LAZY.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260303235903.1967409-3-paulmck@kernel.org
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such rcuscale scenarios
to CONFIG_PREEMPT_LAZY.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260303235903.1967409-2-paulmck@kernel.org
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such rcutorture scenarios
to CONFIG_PREEMPT_LAZY.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/bfe89f6c-3b63-40c6-aa6d-5f523e3e9a31@paulmck-laptop
Cross-merge networking fixes after downstream PR (net-7.0-rc3).
No conflicts.
Adjacent changes:
net/netfilter/nft_set_rbtree.c
fb7fb40163 ("netfilter: nf_tables: clone set on flush only")
3aea466a43 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched: fq: clear q->band_pkt_count[] in fq_reset()
- sched: only allow act_ct to bind to clsact/ingress qdiscs and
shared blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XGBM
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter and wireless.
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched:
- fq: clear q->band_pkt_count[] in fq_reset()
- only allow act_ct to bind to clsact/ingress qdiscs and shared
blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
xdp: produce a warning when calculated tailroom is negative
net: enetc: use truesize as XDP RxQ info frag_size
libeth, idpf: use truesize as XDP RxQ info frag_size
i40e: use xdp.frame_sz as XDP RxQ info frag_size
i40e: fix registering XDP RxQ info
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
ice: fix rxq info registering in mbuf packets
xsk: introduce helper to determine rxq->frag_size
xdp: use modulo operation to calculate XDP frag tailroom
selftests/tc-testing: Add tests exercising act_ife metalist replace behaviour
net/sched: act_ife: Fix metalist update behavior
selftests: net: add test for IPv4 route with loopback IPv6 nexthop
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
MAINTAINERS: remove Thomas Falcon from IBM ibmvnic
MAINTAINERS: remove Claudiu Manoil and Alexandre Belloni from Ocelot switch
MAINTAINERS: replace Taras Chornyi with Elad Nachman for Marvell Prestera
MAINTAINERS: remove Jonathan Lemon from OpenCompute PTP
MAINTAINERS: replace Clark Wang with Frank Li for Freescale FEC
...
Add 2 test cases to exercise fix in act_ife's internal metalist
behaviour.
- Update decode ife action into encode with tcindex metadata
- Update decode ife action into encode with multiple metadata
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260304140603.76500-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a regression test for a kernel panic that occurs when an IPv4 route
references an IPv6 nexthop object created on the loopback device.
The test creates an IPv6 nexthop on lo, binds an IPv4 route to it, then
triggers a route lookup via ping to verify the kernel does not crash.
./fib_nexthops.sh
Tests passed: 249
Tests failed: 0
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260304113817.294966-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tun UDP tunnel GSO fixture contains XFAIL-marked variants intended to
exercise failure paths (e.g. EMSGSIZE / "Message too long").
Using ASSERT_EQ() in these tests aborts the subtest, which prevents the
harness from classifying them as XFAIL and can make the overall net: tun
test fail.
Switch the relevant ASSERT_EQ() checks to EXPECT_EQ() so the subtests
continue running and the failures are correctly reported and accounted
as XFAIL where applicable.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260225111451.347923-2-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TEST_F() allocates and registers its struct __test_metadata via mmap()
inside its constructor, and only then assigns the
_##fixture_##test##_object pointer.
XFAIL_ADD() runs in a constructor too and reads
_##fixture_##test##_object to initialize xfail->test. If XFAIL_ADD runs
first, xfail->test can be NULL and the expected failure will be reported
as FAIL.
Use constructor priorities to ensure TEST_F registration runs before
XFAIL_ADD, without adding extra state or runtime lookups.
Fixes: 2709473c93 ("selftests: kselftest_harness: support using xfail")
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260225111451.347923-1-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test verifies there are no errors when a devices RSS key is updated
while traffic is flowing. The current check is a no-op since the last
sample was subtracted from itself.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Link: https://patch.msgid.link/20260303202258.1595661-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: endpoints with both the signal and
subflow flags should always be marked as used even if it was not
possible to create new subflows due to the MPTCP PM limits.
For this test, an extra endpoint is created with both the signal and the
subflow flags, and limits are set not to create extra subflows. In this
case, an ADD_ADDR is sent, but no subflows are created. Still, the local
endpoint is marked as used, and no warning is fired when removing the
endpoint, after having sent a RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 85df533a78 ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-5-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: RM_ADDR were sent over the first
found active subflow which could be the same as the one being removed.
It is more likely to loose this notification.
For this check, RM_ADDR are explicitly dropped when trying to send them
over the initial subflow, when removing the endpoint attached to it. If
it is dropped, the test will complain because some RM_ADDR have not been
received.
Note that only the RM_ADDR are dropped, to allow the linked subflow to
be quickly and cleanly closed. To only drop those RM_ADDR, a cBPF byte
code is used. If the IPTables commands fail, that's OK, the tests will
continue to pass, but not validate this part. This can be ignored:
another subtest fully depends on such command, and will be marked as
skipped.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 8dd5efb1f9 ("mptcp: send ack for rm_addr")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-3-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, the netem qdisc can keep up to 1000 packets under its belly
to deal with the configured rate and delay. The simult flows test-case
simulates very low speed links, to avoid problems due to slow CPUs and
the TCP stack tend to transmit at a slightly higher rate than the
(virtual) link constraints.
All the above causes a relatively large amount of packets being enqueued
in the netem qdiscs - the longer the transfer, the longer the queue -
producing increasingly high TCP RTT samples and consequently increasingly
larger receive buffer size due to DRS.
When the receive buffer size becomes considerably larger than the needed
size, the tests results can flake, i.e. because minimal inaccuracy in the
pacing rate can lead to a single subflow usage towards the end of the
connection for a considerable amount of data.
Address the issue explicitly setting netem limits suitable for the
configured link speeds and unflake all the affected tests.
Fixes: 1a418cb8e8 ("mptcp: simult flow self-tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-1-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test that verifies KVM's newly introduced behavior of synthesizing
a triple fault in L1 if L2 clears EFER.SVME without an L1 interception
(which is architecturally undefined).
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260209195142.2554532-3-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a test that verifies that KVM correctly injects a #GP for nested
VMRUN and a shutdown for nested #VMEXIT, if the GPA of vmcb12 cannot be
mapped.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260303003421.2185681-27-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
'virt' is confusing in the VMCB because it is relative and ambiguous.
The 'virt_ext' field includes bits for LBR virtualization and
VMSAVE/VMLOAD virtualization, so it's just another miscellaneous control
field. Name it as such.
While at it, move the definitions of the bits below those for
'misc_ctl' and rename them for consistency.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260303003421.2185681-20-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
The 'nested_ctl' field is misnamed. Although the first bit is for nested
paging, the other defined bits are for SEV/SEV-ES. Other bits in the
same field according to the APM (but not defined by KVM) include "Guest
Mode Execution Trap", "Enable INVLPGB/TLBSYNC", and other control bits
unrelated to 'nested'.
There is nothing common among these bits, so just name the field
misc_ctl. Also rename the flags accordingly.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260303003421.2185681-19-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a selftest exercising save/restore with usage of LBRs in both L1 and
L2, and making sure all LBRs remain intact.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260303003421.2185681-5-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>