The range alignment strategy differs between ifs_clear_range_dirty() and
ifs_set_range_dirty(). The former rounds inwards to clear only
fully-covered blocks, while the latter rounds outwards to mark any
partially-touched block as dirty. Add comments to document this
asymmetry in block range calculation.
Suggested-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260714082325.325163-6-yi.zhang@huaweicloud.com
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
ifs_set_range_dirty() and ifs_set_range_uptodate() compute last_blk
as (off + len - 1) >> i_blkbits. When off is 0 and len is 0, the
unsigned subtraction underflows to SIZE_MAX, producing a huge
last_blk and nr_blks value that causes bitmap_set() to write far
beyond the ifs->state allocation.
Regarding ifs_set_range_uptodate(), it is temporarily safe because len
cannot be passed in as 0. However, for ifs_set_range_dirty() this is
reachable from __iomap_write_end(): when copy_folio_from_iter_atomic()
returns 0 (e.g. user buffer fault) and the folio is already uptodate,
the guard at the top of __iomap_write_end() does not trigger because
!folio_test_uptodate() is false, and iomap_set_range_dirty() is called
with copied == 0.
Add a !len guard to both functions before the computation, so that a
zero-length range is a no-op.
Fixes: 4ce02c6797 ("iomap: Add per-block dirty state tracking to improve performance")
Cc: stable@vger.kernel.org # v6.6
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260714082325.325163-5-yi.zhang@huaweicloud.com
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The did_zero output parameter was unconditionally set after the loop,
which is incorrect. It should only be set when the zeroing operation
actually completes, not when IOMAP_F_STALE is set or when
IOMAP_F_FOLIO_BATCH is set but !folio causes the loop to break early,
or when iomap_iter_advance() returns an error.
This causes did_zero to be incorrectly set when zeroing a clean
unwritten extent because the loop exits early without actually zeroing
any data.
Fix it by using a local variable to track whether any folio was actually
zeroed, and only set did_zero after the loop if zeroing happened.
Fixes: 98eb8d9502 ("iomap: set did_zero to true when zeroing successfully")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260714082325.325163-4-yi.zhang@huaweicloud.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Current iomap_invalidate_folio() can only invalidate an entire folio. If
we truncate a partial folio on a filesystem where the block size is
smaller than the folio size, it will leave behind dirty bits for the
truncated or punched blocks. During the write-back process, it will
attempt to map the invalid hole range. Fortunately, this has not caused
any real problems so far because the ->writeback_range() function
corrects the length.
However, the implementation of FALLOC_FL_ZERO_RANGE in ext4 depends on
the support for invalidating partial folios. When ext4 partially zeroes
out a dirty and unwritten folio, it does not perform a flush first like
XFS. Therefore, if the dirty bits of the corresponding area cannot be
cleared, the zeroed area after writeback remains in the written state
rather than reverting to the unwritten state. Fix this by supporting
invalidation of partial folios.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260714082325.325163-3-yi.zhang@huaweicloud.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The block range calculation in ifs_clear_range_dirty() is incorrect when
partially clearing a range in a folio. We cannot clear the dirty bit of
the first block or the last block if the start or end offset is not
blocksize-aligned. This has not yet caused any issues since we always
clear a whole folio in iomap_writeback_folio().
Fix this by rounding up the first block to blocksize alignment, and
calculate the last block by rounding down (using truncation). Correct
the nr_blks calculation accordingly.
Fixes: 4ce02c6797 ("iomap: Add per-block dirty state tracking to improve performance")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260714082325.325163-2-yi.zhang@huaweicloud.com
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The commit 7aa7d4bf9d ("usb: typec: ucsi: Fix race condition and
ordering in port unregistration") consolidated port teardown into the
ucsi_unregister_port() helper. However, it introduced an ordering problem
in the ucsi_init() error path.
Fix this by ensuring ucsi_unregister_port() is called before we unregister
their corresponding lockdep keys.
Cc: stable@vger.kernel.org
Fixes: 7aa7d4bf9d ("usb: typec: ucsi: Fix race condition and ordering in port unregistration")
Reported-by: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/all/22064276-6c56-411a-9f20-6917ceeb865f@intel.com/
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260717104614.325250-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After a recent upstream LLVM change to start generating jump and lookup
tables in switch statements in more instances [1], linking the
compressed x86 boot image when CONFIG_KERNEL_ZSTD is enabled fails with:
ld.lld: error: Unexpected run-time relocations (.rela) detected!
Dumping the relocations in misc.o, which is the only file influenced by
CONFIG_KERNEL_ZSTD in the decompressor, shows dynamic relocations to
some string constants, which correspond to the string literals in the
switch statement in handle_zstd_error():
Relocation section '.rela.data.rel.ro' at offset 0x277b0 contains 31 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000006600000001 R_X86_64_64 0000000000000000 .rodata.str1.1 + 73a
0000000000000008 0000006600000001 R_X86_64_64 0000000000000000 .rodata.str1.1 + 78e
0000000000000010 0000006600000001 R_X86_64_64 0000000000000000 .rodata.str1.1 + 78e
0000000000000018 0000006600000001 R_X86_64_64 0000000000000000 .rodata.str1.1 + 78e
...
This optimization is problematic for the decompressor environment, as it
is built as -fPIE without any explicit absolute references (as described
at the top of misc.c) while not applying any dynamic relocations, hence
the linker assertion. To opt out of this optimization, which is of
little value in this special early boot code, and to mirror the other
x86 startup code in arch/x86/boot/startup, disable jump tables in the
decompressor.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: fa02a6ed66 [1]
Link: https://patch.msgid.link/20260722-x86-boot-compressed-disable-jt-clang-v2-1-7373d38482fb@kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2165
Commit 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm") made
xe_svm_init() unconditional in xe_vm_create() and extended it to also
initialize a "simple" gpusvm state for non-fault-mode VMs. The matching
xe_svm_fini() call in xe_vm_close_and_put() was updated to run
unconditionally, but the error unwind path in xe_vm_create() was not.
On the drm_gpuvm_resv_object_alloc() failure path, xe_svm_init() has
already succeeded but xe_svm_fini() is only called when
XE_VM_FLAG_FAULT_MODE is set. For non-fault-mode VMs this leaves
vm->svm.gpusvm partially initialized and leaks the resources allocated
by drm_gpusvm_init().
For fault-mode VMs, xe_svm_init() additionally acquires the pagemap
owner via drm_pagemap_acquire_owner() and the pagemaps via
xe_svm_get_pagemaps(). Those resources are released by xe_svm_close(),
not xe_svm_fini(). On the same error path, xe_svm_close() is not
called either, so fault-mode VMs leak the pagemap owner and pagemaps.
Fix both leaks:
- Call xe_svm_fini() unconditionally on the err_svm_fini path, matching
the unconditional xe_svm_init() call. Move the vm->size = 0
assignment out of the conditional so the xe_vm_is_closed() assert in
xe_svm_fini() (and xe_svm_close()) holds for both modes.
- Call xe_svm_close() for fault-mode VMs before xe_svm_fini(), matching
the ordering used in xe_vm_close_and_put().
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Cc: Matthew Auld <matthew.auld@intel.com>
Assisted-by: Claude:claude-opus-4.7
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260721205516.4058959-2-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit ca2a3587d5)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
PCI bus, device and function can be same for devices existing across
different domains. Allow per domain unique identifier while registering
platform device to prevent name conflict.
Fixes: f0e53aadd7 ("drm/xe: Support for I2C attached MCUs")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260721113438.651100-1-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit a79f6abc8b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
qdisc_get_rtab() and qdisc_put_rtab() mutate the process-global singly
linked list qdisc_rtab_list and a plain non-atomic 'int refcnt' with no
lock. This was only safe because every caller historically held the RTNL
mutex, which serialized all rate-table lookups, inserts and frees.
That invariant no longer holds. cls_flower sets
TCF_PROTO_OPS_DOIT_UNLOCKED, so tc_new_tfilter() keeps rtnl_held == false
for it and sets TCA_ACT_FLAGS_NO_RTNL. That flag propagates through
tcf_exts_validate_ex() -> tcf_action_init() -> tcf_action_init_1() ->
tcf_police_init(), which calls qdisc_get_rtab()/qdisc_put_rtab() with the
RTNL mutex NOT held. Two RTM_NEWTFILTER requests on different CPUs, each
adding a flower filter with a police action carrying the same rate, then
race on qdisc_rtab_list and on the non-atomic refcnt, leading to a
use-after-free / double-free of the kmalloc-2k struct qdisc_rate_table.
qdisc_rtab_list is a single global (not per-netns), so the corrupted
object is shared system-wide.
BUG: KASAN: slab-use-after-free in qdisc_put_rtab+0x12f/0x160
qdisc_put_rtab+0x12f/0x160
tcf_police_init+0xda9/0x1590
tcf_action_init_1+0x460/0x6b0
tcf_action_init+0x439/0xa40
tcf_exts_validate_ex+0x42d/0x550
fl_change+0xddd/0x7da0
tc_new_tfilter+0xaa7/0x2420
rtnetlink_rcv_msg+0x95e/0xe90
which belongs to the cache kmalloc-2k of size 2048
Protect qdisc_rtab_list and the refcount with a dedicated spinlock. The
(sleeping, GFP_KERNEL) allocation in qdisc_get_rtab() is performed before
taking the lock; if a concurrent inserter added an identical table in the
meantime the freshly allocated one is freed under the lock, so no
duplicate is leaked. qdisc_put_rtab() now decrements the refcount and
unlinks under the same lock.
Fixes: 470502de5b ("net: sched: unlock rules update API")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Aldo Ariel Panzardo <qwe.aldo@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260715114114.446841-1-qwe.aldo@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ila_csum_adjust_transport() caches ip6h = ipv6_hdr(skb) before calling
pskb_may_pull(). On a non-linear skb whose transport header sits in a page
fragment, pskb_may_pull() can call __pskb_pull_tail() / pskb_expand_head()
and free the old skb head, leaving ip6h dangling; the following
get_csum_diff(ip6h, p) then reads freed memory. ila_update_ipv6_locator()
uses ip6h (and the iaddr derived from it) again after the csum-adjust
call and additionally writes the new locator through that pointer.
Impact: a remote IPv6 packet routed through a configured ILA
csum-adjust-transport route or receive-side mapping triggers a
slab-use-after-free in ila_update_ipv6_locator() (KASAN). The route or
mapping requires CAP_NET_ADMIN to configure, but trigger packets are
unauthenticated once it exists.
Reload ip6h after each pskb_may_pull() in ila_csum_adjust_transport()
before the csum-diff read. In ila_update_ipv6_locator() only the
ILA_CSUM_ADJUST_TRANSPORT case pulls the skb, so reload ip6h and iaddr in
that case alone before the destination-address write; the neutral-map
modes never pull and keep their cached pointers.
Fixes: 33f11d1614 ("ila: Create net/ipv6/ila directory")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20260714114903.3763420-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
page_va[] is annotated __counted_by(nr_page_va), so nr_page_va must
cover an index before that element is accessed. The allocation loop
writes page_va[id] while nr_page_va is still id and increments it only
afterwards, so every write is one element past the declared count.
The store is out of bounds with respect to the annotation: a build with
CONFIG_UBSAN_BOUNDS on a toolchain that honours __counted_by
(clang >= 20.1, gcc >= 15.1) flags it as an array-index overflow.
Increment nr_page_va before writing the element it now covers. A failed
allocation then leaves the slot counted but NULL; the error path frees
it with free_page(0), which is a no-op.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260713072823.2668323-1-fuad.tabba@linux.dev
Fixes: 96e43537af ("tracing: Introduce trace remotes")
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the
outer header, but for a Geneve-encapsulated packet the device can set
them based on the inner header instead, signalled by the
VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the
function never skips the outer encapsulation, this mismatch triggers:
- BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer
protocol is UDP (Geneve), not TCP.
- BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner
IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa).
Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the
function cannot locate the inner header it would need to parse. Also
convert the remaining BUG_ON()s in this function to return 0
defensively.
Fixes: 45dac1d6ea ("vmxnet3: Changes for vmxnet3 adapter version 2 (fwd)")
Signed-off-by: Harshaka Narayana <harshaka.narayana@broadcom.com>
Reviewed-by: Ronak Doshi <ronak.doshi@broadcom.com>
Reviewed-by: Sankararaman Jayaraman <sankararaman.jayaraman@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260713140915.3381715-1-harshaka.narayana@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xfer_read() waits for the HDMI I2C transaction to reach
I2C_TRANSACTION_DONE, but it ignores both timeout and signal returns from
wait_for_completion_interruptible_timeout(). If the interrupt never
advances the transaction state, the loop can wait forever.
Return -ETIMEDOUT when the completion wait expires, propagate interrupted
waits, and make the I2C master_xfer callback return the first transfer
error instead of reporting a successful message count.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260625003240.6923-1-pengpeng@iscas.ac.cn
sctp_auth_chunk_verify() returns true unconditionally when
chunk->auth_chunk is NULL, silently skipping authentication.
This is incorrect when:
1. skb_clone() failed in the BH receive path, leaving auth_chunk
NULL. In sctp_endpoint_bh_rcv() asoc is NULL for new
connections, so the early sctp_auth_recv_cid() check cannot
catch this.
2. No AUTH chunk precedes COOKIE-ECHO, so skb_clone() is never
called and auth_chunk remains NULL.
Fix by checking sctp_auth_recv_cid() when auth_chunk is NULL:
if authentication is required, return false to drop the chunk;
otherwise continue normally.
Fixes: bbd0d59809 ("[SCTP]: Implement the receive and verification of AUTH chunk")
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260721015532.120157-2-l1138897701@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When replacing the source list of an MDB remote entry, all existing
sources are first marked for deletion and vxlan_mdb_remote_srcs_add()
is then called to add the new source list. Sources present in the new
list have their deletion mark cleared, and any sources left marked
afterwards are removed.
If vxlan_mdb_remote_srcs_add() fails partway through, its error path
deletes all entries on the remote's source list. That rollback is only
correct for its other caller, vxlan_mdb_remote_add(), where the remote
was just allocated and the list contains solely entries added during
the call. On the replace path the list also holds pre-existing sources,
so a failed replace tears them down together with their (S, G)
forwarding entries instead of leaving the entry unchanged.
This is reachable from an existing (*, G) remote. An EXCLUDE filter
that loses sources starts forwarding traffic that should be blocked,
while an INCLUDE filter that loses sources drops traffic that should be
forwarded.
Mark entries created during the current pass with a new
VXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear
the deletion mark on the pre-existing ones, so a failed replace leaves
the source list untouched. Retain the flag until the whole operation
succeeds and then clear it. Also stop vxlan_mdb_remote_src_add() from
deleting a pre-existing entry it only looked up when adding that
entry's forwarding entry fails.
Fixes: a3a48de5ea ("vxlan: mdb: Add MDB control path support")
Cc: stable@vger.kernel.org
Signed-off-by: James Raphael Tiovalen <jamestiotio@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260720160428.249356-1-jamestiotio@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 1b9707e6f1 ("net: stmmac: enable RPS and RBU
interrupts"), suspending causes an interrupt storm from the RPS
interrupt.
Fix this by adding a deinit_chan() op to stmmac_dma_ops, which
masks all default dma channel interrupts. This is called from
stmmac_stop_all_dma(), so interrupts don't trigger while suspending.
Fixes: 1b9707e6f1 ("net: stmmac: enable RPS and RBU interrupts")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Luis Lang <luis.la@mail.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260720111534.163416-1-luis.la@mail.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before converting to the phylink interface, the init function would have
set a non-reserved I/F mode in the maccfg2 register. After converting to
phylink, 0 is written as mode, which is a reserved value (although it's
the hardware default). Without a valid mode, a SGMII link is never
established between the MAC and the PHY and thus .link_up() is never
called which could set the correct mode according to the actual speed.
Fix it by setting the maximum speed of the phy_interface_t in use in
.mac_config() - just like the driver did before the phylink conversion.
Fixes: 5d93cfcf73 ("net: dpaa: Convert to phylink")
Suggested-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20260717132401.2653252-1-mwalle@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit b0473dcd4b ("smp: Improve smp_call_function_single()
CSD-lock diagnostics") changed smp_call_function_single() so that,
when CSD lock debugging is enabled, async !wait calls use the
destination CPU csd_data. That improves diagnostics, but it also removes
the single-writer property that made the old csd_lock() safe: multiple
CPUs can now prepare the same destination CPU CSD concurrently.
csd_lock() currently waits for CSD_FLAG_LOCK to clear and then sets the
bit with a non-atomic read-modify-write. Two senders can both see an
unlocked CSD, set the bit, overwrite the callback fields, and enqueue
the same llist node. Re-adding a node that is already the queue head can
make node->next point to itself, leaving the target CPU stuck walking
call_single_queue. Later synchronous work, such as a TLB shootdown, can
then remain queued and trigger soft-lockup warnings or panics.
Keep the single csd_lock() implementation, but when CSD lock debugging is
enabled, acquire CSD_FLAG_LOCK with try_cmpxchg_acquire(). This makes the
destination CPU CSD a real atomic lock in the only configuration where it
can be shared by multiple remote senders, while preserving the existing
non-debug fast path.
Fixes: b0473dcd4b ("smp: Improve smp_call_function_single() CSD-lock diagnostics")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260716004539.13983-2-paulmck@kernel.org
Commit b0473dcd4b ("smp: Improve smp_call_function_single()
CSD-lock diagnostics") made smp_call_function_single() use the destination
CPU's csd_data when CSD lock debugging is enabled. That lets the debug code
associate a stuck CSD lock with the target CPU, but it also means the CPU
argument is used in per_cpu_ptr() before generic_exec_single() has a chance
to validate it.
This becomes unsafe when smp_call_function_any() cannot find an online CPU
in the supplied mask. In that case the selected CPU can be nr_cpu_ids, and
the !wait path calls get_single_csd_data(cpu) before generic_exec_single()
returns -ENXIO. With csdlock_debug_enabled set, that indexes the per-CPU
offset array with an invalid CPU number.
Use the destination CPU's csd_data only when the CPU number is within
nr_cpu_ids. For invalid CPU numbers, fall back to the local CPU's csd_data
and let generic_exec_single() perform the existing validation and return
-ENXIO.
Fixes: b0473dcd4b ("smp: Improve smp_call_function_single() CSD-lock diagnostics")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Muchun Song <muchun.song@linux.dev>
Link: https://patch.msgid.link/20260716004539.13983-1-paulmck@kernel.org
* Fix validation of LIVEUPDATE_SESSION_GET_NAME ioctl argument caused by a
wrong resolution of a merge conflict during the last merge window
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmpg7E4ACgkQOQOGJssO
/ZHdXQf+KPPnhNyDqHgHtnsp/sd4wQ5vGVjfmAwtX7nxpxPenGSwhZ8yKShClMNM
2s0KDQmorqKK1j3MMy+xzI+MUl7uHMnHB4cpOsESrILzfqWUgo5VmEU4beCCYXXs
1JD4eKjAs+7F59g0HE75pwmqyXzrD2nq29xWlVxQCOxsTkGe+j28B/uqw0MI8CTd
66LZzyFRT/VBjyaZYSU03KN5heJsFsckYaoPCxK4bZqaiFi65bCyd/YZ7t6JgqDl
PLx1fwjFpmCz6HArFfw3EnwVzkMoZ/qep4h+h+WMH3jiXUUKFHuJWpHYoXYN1C4r
xuQm3Rpq3HmwR/8VHtwLTJSeNXtfBg==
=KyUS
-----END PGP SIGNATURE-----
Merge tag 'liveupdate-fixes-2026-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux
Pull liveupdate fix from Mike Rapoport:
- Fix validation of LIVEUPDATE_SESSION_GET_NAME ioctl argument caused
by a wrong resolution of a merge conflict during the last merge
window
* tag 'liveupdate-fixes-2026-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
liveupdate: fix GET_NAME ioctl argument validation
Notable fixes:
- airoha: Prevent division by zero when clock frequency is zero
- core: pretimeout: Fix UAF in watchdog_unregister_governor()
- ni903x_wdt: Check ACPI_COMPANION() against NULL
- s32g_wdt: remove incorrect options in watchdog_info struct
-----BEGIN PGP SIGNATURE-----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=12+G
-----END PGP SIGNATURE-----
Merge tag 'watchdog-for-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull watchdog fixes from Guenter Roeck:
- airoha: Prevent division by zero when clock frequency is zero
- core: pretimeout: Fix UAF in watchdog_unregister_governor()
- ni903x_wdt: Check ACPI_COMPANION() against NULL
- s32g_wdt: remove incorrect options in watchdog_info struct
* tag 'watchdog-for-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
watchdog: airoha: Prevent division by zero when clock frequency is zero
watchdog: pretimeout: Fix UAF in watchdog_unregister_governor()
docs: watchdog: Fix brackets
watchdog: ni903x_wdt: Check ACPI_COMPANION() against NULL
watchdog: s32g_wdt: remove incorrect options in watchdog_info struct
Fixes
- asus-wmi: Revert retaining battery charge threshold on boot due to
userspace regression. Userspace assumed (errorneously) a
non-zero return code from sysfs read implies feature is not
supported but the correct way would be to check file
visibility instead. This results in the kernel change
breaking the functionality completely. Thus, we are taking
timeout on the kernel side to allow userspace to sort their
problem first.
- intel/vsec: Free ACPI discovery data allocation on error paths
The following is an automated shortlog grouped by driver:
asus-wmi:
- temporarily revert to setting a charge limit
intel/vsec:
- free ACPI discovery data on early errors
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCamC2OgAKCRBZrE9hU+XO
MayPAQD6WZEq/0gBk0qmXQs/LsgGbhmmt0lWjN2i4KeQ/CqUlQEA/TAII2u3amM0
m0xOxdu139D4b7VJp8QjCanIYhFusg0=
=ePnn
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- asus-wmi: Revert retaining battery charge threshold on boot due to
userspace regression.
Userspace assumed (errorneously) a non-zero return code from sysfs
read implies feature is not supported but the correct way would be to
check file visibility instead. This results in the kernel change
breaking the functionality completely. Thus, we are taking timeout on
the kernel side to allow userspace to sort their problem first.
- intel/vsec: Free ACPI discovery data allocation on error paths
* tag 'platform-drivers-x86-v7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: temporarily revert to setting a charge limit
platform/x86/intel/vsec: free ACPI discovery data on early errors
When an HSR master device is brought UP, it auto-adds VLAN 0 via
vlan_vid0_add(), which propagates VID 0 to its slave devices (slave A and B).
If a slave device is later unregistered while HSR is active (e.g., during
netns cleanup or interface destruction), hsr_del_port() is called to
detach the slave port from the HSR master. However, hsr_del_port() currently
does not delete the VLAN IDs that were synced to the slave device by HSR.
As a result, the slave device retains a refcount on VID 0 (and any other
synced VLANs). When the slave device is destroyed, its vlan_info /
vlan_vid_info structure remains allocated, leading to a memory leak.
Fix this by calling vlan_vids_del_by_dev(port->dev, master->dev) in
hsr_del_port() before unlinking slave A or slave B ports, matching the
propagation logic in hsr_ndo_vlan_rx_add_vid() / hsr_ndo_vlan_rx_kill_vid()
and the cleanup behavior in bonding and team drivers.
Fixes: 1a8a63a530 ("net: hsr: Add VLAN CTAG filter support")
Reported-by: syzbot+456957213f32970c0762@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a4cb6ca.57639fcc.86d58.000b.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Felix Maurer <fmaurer@redhat.com>
Link: https://patch.msgid.link/20260721101240.995597-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov says:
====================
net: bridge: fix vlan range dumps starting with a PVID
Patch 01 fixes a bug that can skip dumping VLANs which a part of a range
starting with a PVID VLAN and share the same flags. PVID VLAN should be
always on its own. Patch 02 adds a selftest for this case. More information
can be found in the respective patches.
====================
Link: https://patch.msgid.link/20260721140922.682265-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test with PVID VLAN that matches the flags of the VLAN following it
and check if the range is properly dumped. PVID VLAN should be on its own
and all VLANs should be present in the dump.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260721140922.682265-3-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a bug in all range dumps that rely on br_vlan_can_enter_range()
when the PVID is a range starting VLAN, all following VLANs that match
its flags can enter the range, but when the range is filled in only the
PVID VLAN is dumped and the rest of the range is discarded because
br_vlan_fill_vids() checks for the PVID flag. Since the PVID VLAN can
be only one, we need to break ranges around it, the best way to do that
consistently for all is to alter br_vlan_can_enter_range() to take into
account the PVID and return false to break the range when it's matched.
Before the fix:
$ ip l add br0 type bridge vlan_filtering 1
$ ip l add dumdum type dummy
$ ip l set dumdum master br0
$ ip l set br0 up
$ ip l set dumdum up
$ bridge vlan add dev dumdum vid 1 pvid untagged master
$ bridge vlan add dev dumdum vid 2 untagged master
$ bridge vlan show dev dumdum # use legacy dump to show all vlans
port vlan-id
dumdum 1 PVID Egress Untagged
2 Egress Untagged
$ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN)
port vlan-id
dumdum 1 PVID Egress Untagged
state forwarding mcast_router 1
VLAN 2 is missing, and if there are more matching VLANs afterwards
they'd be missing too.
After the fix:
[ same setup steps ]
$ bridge vlan show dev dumdum
port vlan-id
dumdum 1 PVID Egress Untagged
2 Egress Untagged
$ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN)
port vlan-id
dumdum 1 PVID Egress Untagged
state forwarding mcast_router 1
2 Egress Untagged
state forwarding mcast_router 1
Fixes: 0ab5587951 ("net: bridge: vlan: add rtm range support")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260721140922.682265-2-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A collection of fixes that have been accumulated recently.
The amount is still "new normal", but all small fixes.
Mostly hardware-specific quirks, but including a few core fixes, too.
ALSA Core:
- Fix potential UAF and race fixes in ALSA timer core
- Fix sequencer queue timer cleanup to prevent leaks and double-free
HD-audio:
- Fix silent streams with Intel HDMI keep-alive silent mode
- Quirks for HP laptops (Pavilion x360, EliteBook 830 G8, ZBook 8
G2a), Samsung 750XBE/730XBE, and Dell Pro QC1255, Alienware x16 R2,
Lunnen Ground 14
- Properly validate ACPI mute object in CS35L41 HDA companion driver
- Reset calibration data size on failure in TAS2781 HDA driver.
USB-audio:
- Support FIXED_RATE quirk for JBL Quantum650 Wireless USB headset
ASoC:
- Intel SOF SoundWire board driver quirks for new Dell laptops
- DMI overrides and quirks for AMD ACP/YC platforms, including new
ASUS TUF platforms and MSI Vector A16 HX laptops
- Skip sysclk reset for active DAIs in shutdown for FSL imx-card
- Fix spurious BCLK on resume by clearing BYP in FSL SAI driver
- Add playback-only quirk for H616 codec in Allwinner driver
- Fix Cirrus Logic CS35L56 potential probe deadlock
- Fix cache write-through on resume in FS210X codec
- Bound firmware description string parsing in TAS2781 codec driver
- Fix duplicate DAPM widget names for wideband DAI in BT-SCO codec
-----BEGIN PGP SIGNATURE-----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=Shbe
-----END PGP SIGNATURE-----
Merge tag 'sound-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes that have been accumulated recently.
The amount is still "new normal", but all small fixes. Mostly
hardware-specific quirks, but including a few core fixes, too.
ALSA Core:
- Fix potential UAF and race fixes in ALSA timer core
- Fix sequencer queue timer cleanup to prevent leaks and double-free
HD-audio:
- Fix silent streams with Intel HDMI keep-alive silent mode
- Quirks for HP laptops (Pavilion x360, EliteBook 830 G8, ZBook 8
G2a), Samsung 750XBE/730XBE, and Dell Pro QC1255, Alienware x16 R2,
Lunnen Ground 14
- Properly validate ACPI mute object in CS35L41 HDA companion driver
- Reset calibration data size on failure in TAS2781 HDA driver.
USB-audio:
- Support FIXED_RATE quirk for JBL Quantum650 Wireless USB headset
ASoC:
- Intel SOF SoundWire board driver quirks for new Dell laptops
- DMI overrides and quirks for AMD ACP/YC platforms, including new
ASUS TUF platforms and MSI Vector A16 HX laptops
- Skip sysclk reset for active DAIs in shutdown for FSL imx-card
- Fix spurious BCLK on resume by clearing BYP in FSL SAI driver
- Add playback-only quirk for H616 codec in Allwinner driver
- Fix Cirrus Logic CS35L56 potential probe deadlock
- Fix cache write-through on resume in FS210X codec
- Bound firmware description string parsing in TAS2781 codec driver
- Fix duplicate DAPM widget names for wideband DAI in BT-SCO codec"
* tag 'sound-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda/realtek - Add quirk for Dell Pro QC1255
ALSA: hda/tas2781: clear cali_data.total_sz when calibration read fails
ALSA: hda/realtek: Add HDA_CODEC_QUIRK for Samsung 750XBE/730XBE
ALSA: hda/realtek: Fix speakers on Lunnen Ground 14
ALSA: timer: drain a slave's callback before its master detaches it
ALSA: timer: don't re-enter an instance callback that is still running
ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum650 Wireless
ALSA: hda/realtek: Add quirk for HP Pavilion x360
ASoC: Intel: sof_sdw: Add quirks for new Dell laptops
ASoC: cs35l56: Use complete_all() to signal init_completion
ASoC: cs35l56: Fix potential probe() deadlock
ASoC: fs210x: Make cache write through again during resume
ALSA: hda/realtek: Add inverted LED quirk for HP ZBook 8 G2a
ALSA: hda: codecs: hdmi: disable keep-alive before audio format change
ASoC: bt-sco: fix duplicate DAPM widget names for wideband DAI
ALSA: hda: cs35l41: validate and free ACPI mute object
ALSA: hda/realtek: Fix speakers on Alienware x16 R2
ALSA: hda/realtek: Add quirk for HP EliteBook 830 G8 (8AB8) to enable mute LEDs
ASoC: amd: yc: Add DMI quirk for MSI Vector A16 HX A8WIG
ASoC: fsl: imx-card: Skip sysclk reset for active DAIs in shutdown
...
"Notification" is too long and the abbreviated version is used in
several places, which is inconsistent and more ambiguous for users.
Rename it to event, which is easier to keep consistent. To keep the
change small, only change uapi/ + do necessary fix ups, and the rest of
internals can be adjusted in the next release.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/f95ca6717da3c8d3649a1a7f0d883a563f545052.1784726895.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When build_skb() fails in hip04_rx_poll(), the driver jumps to the
refill path without releasing the current RX buffer and its DMA mapping.
Installing a replacement buffer then overwrites the slot references and
leaks both resources.
Keep the current slot intact and return budget so NAPI retries the same
buffer. Also free a newly allocated RX fragment when dma_map_single()
fails.
This issue was found by an in-house static analysis tool.
Fixes: 701a0fd523 ("hip04_eth: fix missing error handle for build_skb failed")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260712142729.2057636-1-fanwu01@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ksmbd_decompress_request() bounds the decompressed size only against
the maximum request size. A compression transform can therefore
produce a buffer smaller than an SMB2 PDU and install it as
conn->request_buf.
The receive path subsequently calls ksmbd_smb_request(), which reads
the protocol ID before the normal SMB2 minimum-size check. If the
decompressed output is too short, that read can access beyond the
request allocation.
Require the decompressed output to contain at least a complete minimum
SMB2 PDU before allocating and installing the replacement request
buffer.
Fixes: a08de24c2b ("ksmbd: negotiate and decode SMB2 compression")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The receive path applies the minimum SMB2 PDU size check only when
ProtocolId is SMB2_PROTO_NUMBER. A packet carrying
SMB2_TRANSFORM_PROTO_NUM bypasses the check even when the negotiated
dialect does not provide transform handling.
On an SMB 2.1 connection, a short transform packet therefore reaches
init_smb2_rsp_hdr(), which interprets the request as a full SMB2 header
and reads beyond the request allocation. The copied fields can then be
returned to the unauthenticated client.
Compression transforms are converted to ordinary SMB2 messages before
protocol validation. After that conversion, validate ordinary SMB2
requests against SMB2_MIN_SUPPORTED_PDU_SIZE and require encryption
transform requests to contain both a transform header and an SMB2
header. This rejects truncated requests before work allocation.
Fixes: 368ba06881 ("ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-31063
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In ntlm_authenticate(), destroy_previous_session() is called using a
user pointer resolved from the client-supplied NTLM blob username field
before the NTLMv2 response is validated. An authenticated attacker can
set the NTLM blob username to match a victim account and set
PreviousSessionId to the victim's session ID; destroy_previous_session()
destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob()
subsequently rejects the request with -EPERM.
Move destroy_previous_session() and the prev_id assignment to after
ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user
rather than the pre-authentication lookup result. This matches the
ordering already used by krb5_authenticate(), where
destroy_previous_session() is called only after
ksmbd_krb5_authenticate() returns success.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-cifs/20260702155449.3639773-1-james_montgomery@disroot.org/
Signed-off-by: James Montgomery <james_montgomery@disroot.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
set_ntacl_dacl() validates sid.num_subauth before copying an ACE, but
does not verify that the declared ACE size contains all sub-authorities
described by that field. An undersized ACE can therefore be copied
and later make the POSIX ACL deduplication walk inspect data beyond
the copied ACE boundary.
The existing initial bound check is also too small. It only ensures
that the ACE size field is accessible before set_ntacl_dacl() reads
sid.num_subauth farther into the input buffer.
Require enough input for the fixed SID header before accessing
num_subauth, reject ACEs smaller than that header, and skip ACEs
whose declared size cannot contain the complete SID. This makes the
validation consistent with the other ACE walk paths.
Reported-by: LocalHost <localhost.detect@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
check_add_overflow() unconditionally writes the truncated sum into *d
even on overflow, per its contract in include/linux/overflow.h.
The four check_add_overflow() guards in set_posix_acl_entries_dacl()
and set_ntacl_dacl() break out of the ACE-building loops on overflow,
but the truncated *size is then consumed downstream at the end of
set_ntacl_dacl():
pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size);
This produces an on-wire NT ACL whose pndacl->size under-reports the
bytes actually written by the preceding fill_ace_for_sid()/memcpy()
calls, yielding a malformed ACL that can trigger out-of-bounds reads
when re-parsed by clients or ksmbd itself.
Restore *size to its pre-addition value on each overflow branch (via
`*size -= ace_sz` / `size -= nt_ace_size`) so that after the break,
*size once again holds the cumulative size of the successfully-written
ACEs. The committed ACL is then truncated-but-self-consistent rather
than malformed.
The ksmbd DACL builders are the only check_add_overflow() sites found
where an overflow path breaks out of a loop and the destination value
is consumed afterward. The other nearby break-style cases either
return -EINVAL on overflow (transport_ipc.c) or break without
consuming the overflowed destination value afterward (buildid.c).
Fixes: 299f962c0b ("ksmbd: use check_add_overflow() to prevent u16 DACL size overflow")
Assisted-by: atomcode:glm-5.2
Assisted-by: Codex:gpt-5.5
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
set_ntacl_dacl() can stop copying ACEs before consuming the full input
DACL when size accounting overflows.
When that happens, num_aces reflects only the ACEs that were actually
copied into the output DACL, but set_posix_acl_entries_dacl() still
receives nt_num_aces and uses it to walk the existing ACE array during
dedup.
That makes the dedup walk scan past the copied ACE array and inspect
buffer tail that does not contain valid ACEs.
Split the two meanings currently carried by the NT ACE count. Pass the
number of copied NT ACEs to bound the dedup walk, and preserve the
original "input DACL had NT ACEs" state separately for the
Everyone/default ACL fallback.
This keeps the dedup walk aligned with the ACEs that are actually
present in the rebuilt DACL.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB2_FLAGS_SIGNED is controlled by the incoming request and only indicates
that a signature accompanies that request. Do not use it to decide whether a
signing-required session must authenticate the request.
Reject an unsigned plaintext request before dispatch when the session
requires signing. Continue to validate signatures on signed requests,
including when signing is optional. Encrypted requests have already been
authenticated during decryption.
An OPLOCK_BREAK acknowledgment is a session request and is subject to the
same signing rule, so do not exclude it from signed-request detection.
Reported-by: Charles Vosburgh <trilobyte777@gmail.com>
Tested-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The VFS initializes a child's POSIX ACL from the parent's default ACL and
the requested creation mode. Do not mutate the parent ACL or overwrite the
child's VFS-computed access and default ACLs afterwards.
This preserves restrictive ACL_MASK entries and prevents SMB object creation
from widening effective permissions.
Reported-by: Charles Vosburgh <trilobyte777@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Michael Bommarito says:
====================
amt: fix use-after-free of the skb head across pulls
Several AMT receive and transmit paths cache a pointer into the skb head
and then call a helper that can reallocate that head before the cached
pointer is used again, so the later access reads or writes freed memory.
Patch 1 walks every AMT path and, for each pointer used after a
reallocating call, either snapshots the value before the first pull or
re-derives the pointer after the last one.
Patch 2 is a smaller, separable hardening change: the three handlers
that rewrite the ethernet header do so in place without making the head
private, which corrupts a cloned skb (for example one held by a packet
tap). It adds skb_cow_head() before the rewrite, split out so the
use-after-free fix is not held up by discussion of the clone case.
====================
Link: https://patch.msgid.link/20260711151934.2955226-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
amt_multicast_data_handler(), amt_membership_query_handler() and
amt_update_handler() rewrite the ethernet header of the decapsulated skb
in place (eth->h_proto, eth->h_dest and, for the query, also
eth->h_source) before handing it up the stack. The skb head may be
shared, for example when a packet tap has cloned it on the underlay
interface, so writing through it corrupts the other reader's copy.
Call skb_cow_head() before the rewrite so the head is private. It is
placed before the pointers into the head are (re-)derived, so a
reallocation caused by the copy is picked up by those derivations.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260711151934.2955226-3-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several AMT receive and transmit paths cache a pointer into the skb head
(ip_hdr(), ipv6_hdr(), eth_hdr() or the AMT message header) and then call
a helper that can reallocate that head before the cached pointer is used
again. pskb_may_pull(), ip_mc_may_pull(), ipv6_mc_may_pull(),
iptunnel_pull_header(), ip_mc_check_igmp() and ipv6_mc_check_mld() can all
free the old head and move the data, so a pointer taken before the call
dangles afterwards and the later access is a use-after-free of the freed
head.
The affected sites are:
amt_rcv() caches ip_hdr() before amt_parse_type() pulls, then reads
iph->saddr.
amt_dev_xmit() caches ip_hdr()/ipv6_hdr() before ip_mc_check_igmp()/
ipv6_mc_check_mld() and pskb_may_pull(), then reads the group address.
amt_multicast_data_handler() caches eth_hdr() before pskb_may_pull(),
then writes the L2 header.
amt_membership_query_handler() caches the AMT header, the outer and
inner eth_hdr() and ip_hdr() before iptunnel_pull_header() and several
pulls, then reads and writes them.
amt_igmpv3_report_handler() and amt_mldv2_report_handler() cache
ip_hdr()/ipv6_hdr() and the current group record and read the record
count from the report header inside the record loop, across the
*_mc_may_pull() calls.
amt_update_handler() caches ip_hdr() and the AMT membership-update
header before pskb_may_pull(), iptunnel_pull_header(),
ip_mc_check_igmp() and the report handler, then reads iph->daddr and
amtmu->nonce / amtmu->response_mac.
Fix each site by either snapshotting the scalar that is used after the
pull before the first pull runs, or re-deriving the header pointer from
the skb after the last pull that can move the head. Values that are
stable across the pull (source and group address, the response MAC and
nonce, the record count, the outer source MAC) are snapshotted; pointers
that are written through or read repeatedly are re-derived.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260711151934.2955226-2-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FS_IOC32_GETVERSION has a distinct compat command encoding. Passing it
through compat_ptr_ioctl() leaves pidfd_ioctl() unable to recognize the
otherwise architecture-independent inode generation query.
Translate the compat command to FS_IOC_GETVERSION before dispatching it
through the native pidfd ioctl implementation.
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260716052822.1034228-1-me@linux.beauty
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Commit 5dae222a5f ("vfs: allow copy_file_range to copy across devices")
allowed filesystems that implement the copy_file_range() f_op to decide
if they want to access cross-sb copy from/to the same fs type.
The same commit added checks to verify same sb copy for filesystems that
implement ->copy_file_range() and do not support cross-sb copy at the
time, namely, to ceph, fuse and nfs.
The two remaining fs which implement ->copy_file_range(), cifs and
overlayfs started to support cross-sb copy from this time.
While overlayfs does support cross-sb copy when the two underlying files
are on the same base fs, the copy operation on the two real files from
two different overalyfs filesystems is performed with the mounter
creds of the destination overlayfs and the read permission access hook
for the source file was called with the wrong creds.
This could cause either deny of access to copy which would otherwise be
allowed (e.g. with splice) or allow read access to file which would
otherwise be denied.
Fix the latter case by explicitly verifying read access to source file
with the source overlayfs mounter creds.
The former case remains a quirk of cross-sb overlayfs copy, but
userspace could fall back to regular copy so no harm done.
Fixes: 5dae222a5f ("vfs: allow copy_file_range to copy across devices")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260712122421.203113-1-amir73il@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The hvs and v3d drivers use dev_get_drvdata(master) in their unbind
functions. Since the vc4-drm gets removed before its dependent drivers
(vc4_hvs/vc4_v3d) the vc4_hvs_unbind/vc4_v3d_unbind functions try to
get drvdata of its master and fails with a null dereference error.
Use the data pointer passed to the unbind functions directly instead of
dev_get_drvdata(master). This avoids using potentially freed memory.
Fixes: d3f5168a08 ("drm/vc4: Bind and initialize the V3D engine.")
Fixes: c8b75bca92 ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Gregor Herburger <gregor.herburger@linutronix.de>
Link: https://patch.msgid.link/20260721-rpi-vc4-fix-v2-1-b813dcd01dc7@linutronix.de
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
