John Madieu <john.madieu@gmail.com> says:
This series independent fixes found in the i.MX SPI driver.
These are:
1/3 fixes a precedence bug in spi_imx_dma_max_wml_find() that makes
the watermark-finding logic effectively dead code. The function
currently always returns wml = 1 because of how the !-operator
binds to the modulo expression.
2/3 fixes a missing return on the package-1 failure path in
spi_imx_dma_data_prepare(). The error path frees the
dma_data array and the package-0 buffers, then falls through
to "return 0" - the caller proceeds with a freed pointer.
3/3 makes spi_imx_setupxfer() propagate the prepare_transfer()
return value. Currently a -EINVAL from mx51_ecspi_prepare_transfer
(e.g. on a word_delay overflow) is silently swallowed and the
transfer proceeds with a partially-configured controller.
spi_imx_setupxfer() calls the per-variant prepare_transfer()
callback and returns 0 unconditionally:
spi_imx->devtype_data->prepare_transfer(spi_imx, spi, t);
return 0;
mx51_ecspi_prepare_transfer() can return -EINVAL when the requested
word_delay does not fit in MX51_ECSPI_PERIOD_MASK. The error is
detected after a partial set of register writes (CTRL: BL, clkdiv,
SMC), so the controller is left in a partially-configured state and
the transfer is then submitted as if setup succeeded.
Propagate the return value. The other variants' prepare_transfer
callbacks all return 0, so this is a no-op for them.
Fixes: a3bb4e663d ("spi: imx: support word delay")
Signed-off-by: John Madieu <john.madieu@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260501135951.2416527-4-john.madieu@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When transfer->len exceeds MX51_ECSPI_CTRL_MAX_BURST and is not a
multiple of it, spi_imx_dma_data_prepare() splits the transfer into
two DMA packages. If preparing the second package fails:
ret = spi_imx_dma_tx_data_handle(spi_imx, &spi_imx->dma_data[1],
transfer->tx_buf + spi_imx->dma_data[0].data_len,
false);
if (ret) {
kfree(spi_imx->dma_data[0].dma_tx_buf);
kfree(spi_imx->dma_data[0].dma_rx_buf);
kfree(spi_imx->dma_data);
}
}
return 0;
the function frees the package-0 buffers and the dma_data array,
then falls through to `return 0`, telling the caller the prepare
succeeded. The caller then dereferences the freed dma_data array,
producing a use-after-free.
Return the error from the failure path so the caller takes its
existing failure branch.
Fixes: faa8e404ad ("spi: imx: support dynamic burst length for ECSPI DMA mode")
Signed-off-by: John Madieu <john.madieu@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260501135951.2416527-3-john.madieu@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The watermark search in spi_imx_dma_max_wml_find() reads:
if (!dma_data->dma_len % (i * bytes_per_word))
break;
The unary ! binds tighter than %, so this parses as:
if ((!dma_data->dma_len) % (i * bytes_per_word))
break;
!dma_data->dma_len is 0 or 1, and `0 % x == 0` for any x; `1 % x` is
0 unless x == 1. The condition is therefore false in every case
except dma_len != 0 with i * bytes_per_word == 1, i.e. i == 1 and
bytes_per_word == 1.
The loop almost always falls through to its end, leaving i == 0,
which the post-loop fallback rewrites to 1:
if (i == 0)
i = 1;
So spi_imx->wml ends up at 1 for essentially every DMA transfer,
defeating the entire purpose of the function. The DMA engine then
requests service after every single FIFO word instead of using
multi-word bursts, hurting throughput on every DMA-capable variant.
Add the missing parentheses so the modulo is computed first, then
negated:
if (!(dma_data->dma_len % (i * bytes_per_word)))
break;
Fixes: faa8e404ad ("spi: imx: support dynamic burst length for ECSPI DMA mode")
Signed-off-by: John Madieu <john.madieu@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260501135951.2416527-2-john.madieu@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA controls should return 1 from a put callback when the control
value changes. fsl_xcvr_capds_put() and fsl_xcvr_tx_cs_put() both
update cached control data but always return 0, so ALSA suppresses
change notifications for the Capabilities Data Structure and playback
IEC958 channel status controls.
Compare the old and new cached values before copying the new data,
and return whether the control value changed.
Fixes: 2856448686 ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260428-asoc-fsl-xcvr-event-generation-v1-1-f21cf0812c4f@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch introduces the driver for the SPI controller found in the
SpacemiT K1 SoC. Currently the driver supports master mode only.
The SPI hardware implements RX and TX FIFOs, 32 entries each, and
supports both PIO and DMA mode transfers.
Signed-off-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://patch.msgid.link/20260502-spi-spacemit-k1-v10-2-f412e1ae8a34@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the SPI controller implemented by the SpacemiT K1 SoC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://patch.msgid.link/20260502-spi-spacemit-k1-v10-1-f412e1ae8a34@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case a chip supports continuous reads, but uses a slightly different
cache operation for these, it may provide a secondary operation template
which will be used only during continuous cache read operations.
From a vendor driver point of view, enabling this feature implies
providing a new set of templates for these continuous read
operations. The core will automatically pick the fastest variant,
depending on the hardware capabilities.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The QSPI controller has two interconnect paths:
1. qspi-config: CPU to QSPI controller for register access
2. qspi-memory: QSPI controller to memory for DMA operations
Currently, the driver only manages the qspi-config path. Add support for
the qspi-memory path to ensure proper bandwidth allocation for QSPI data
transfers to/from memory. Enable and disable both paths during runtime PM
transitions.
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://patch.msgid.link/20260429-spi-nor-v5-3-993016c9711e@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The runtime PM functions had incomplete error handling that could leave the
system in an inconsistent state. If any operation failed midway through
suspend or resume, some resources would be left in the wrong state while
others were already changed, leading to potential clock/power imbalances.
Reorder the suspend/resume sequences to avoid brownout risk by ensuring the
performance state is set appropriately before clocks are enabled and clocks
are disabled before dropping the performance state.
Fix by adding proper error checking for all operations and using goto-based
cleanup to ensure all successfully acquired resources are properly released
on any error.
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://patch.msgid.link/20260429-spi-nor-v5-2-993016c9711e@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the QSPI controller on QCS615 SoC.
Move allOf section after required properties and add if:then constraint
to require minimum 2 interconnects for qcs615 variant.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://patch.msgid.link/20260429-spi-nor-v5-1-993016c9711e@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
here focus on the shared spi-mem layer which is enhanced in order to
bring two new features:
- The possibility to fill a primary and a secondary operation template
in the direct mapping structure in order to support continuous reads
in SPI NAND, which may require two different read operations.
- SPI controllers may indicate possible CS instabilities over long
transfers by setting a boolean. This capability is related to the
previous one, the need for it has arised while testing SPI NAND
continuous reads with the Cadence QSPI controller which cannot, under
certain conditions, keep the CS asserted for the length of
an eraseblock-large transfer.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmn4m50ACgkQJWrqGEe9
VoSUzwf8D7an5inOVMcX2IsbXSkA6vKgrzjc1jG3rGiLrFks/bZyo0R8atp4pUsy
6WDkJfFyHg6IzU92N/37Kha8rnFp7um9OhfB/z2O/ztyqr9d1yM6QDtenknYr+WH
BwcuJ8zenyWuIY526Ar04REJ07s8MZpMUhcnUIw/KpvQiS12UR6NHgEaUrmIjtLD
GCKKFTGOY++9dgObo8ZrkrsLlVUhV5GyvCqUtBNNbADTNAt7j4m6YuyztS7rrmwb
b33RoZiWmG0szkUsTJJBDH15cMB/4wV2SoGm3wzsACHqJhCy0n9FvSVAXwcRm5l7
qOLedtMoBIIIIwBbHPsf0SySToy2ag==
=3qpz
-----END PGP SIGNATURE-----
Merge tag 'mtd/spi-mem-cont-read-for-7.2' into nand/next
Aside from preparation changes in the SPI NAND core, the changes carried
here focus on the shared spi-mem layer which is enhanced in order to
bring two new features:
- The possibility to fill a primary and a secondary operation template
in the direct mapping structure in order to support continuous reads
in SPI NAND, which may require two different read operations.
- SPI controllers may indicate possible CS instabilities over long
transfers by setting a boolean. This capability is related to the
previous one, the need for it has arised while testing SPI NAND
continuous reads with the Cadence QSPI controller which cannot, under
certain conditions, keep the CS asserted for the length of
an eraseblock-large transfer.
Return explicit zero on successful probe to clearly separate the success
and error paths and make the code more readable.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260430120200.249323-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260430120200.249323-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-20-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-18-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-17-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-16-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-15-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-14-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-13-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-12-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-11-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-10-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-9-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-8-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-7-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-6-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: William Zhang <william.zhang@broadcom.com>
Link: https://patch.msgid.link/20260429091333.165363-5-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
phucduc.bui@gmail.com <phucduc.bui@gmail.com> says:
This series converts spin lock handling in UniPhier AIO drivers
to use guard() helpers.
The changes are purely code cleanups with no functional impact.
Some controllers are 'smart', and that's a problem.
For instance, the Cadence quadspi controller is capable of deasserting
the CS automatically whenever a too long period of time without any data
to transfer elapses.
This 'feature' combined with a loaded interconnect with arbitration, a
"long" transfer may be split into smaller DMA transfers. In this case
the controller may allow itself to deassert the CS between chunks.
Deasserting the CS stops any ongoing continuous read. Reasserting it
later to continue the reading will only result in the host getting
garbage.
In this case, the host controller driver has no control over the CS
state, so we cannot reliably enable continuous reads. Flag this
limitation through a spi-mem controller capability.
The inversion in the flag name (starting with 'no_') is voluntary, in
order to avoid the need to set this flag in all controller drivers. Only
the broken controllers shall set this bit, the default being that the
controller masters its CS fully.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Treat the companion amp as generic AMP until full support for companion
amp is added.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260430121043.552241-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the incorrect use of onchip_spkid_gpios[i] in the dev_err() after
regmap_read() of CS35L56_GPIO_STATUS1 returns an error.
This dev_err() was incorrectly copy-pasted from one inside the for-loop,
where i was valid. The read of CS35L56_GPIO_STATUS1 isn't for a specific
GPIO register, so the use of onchip_spkid_gpios[i] in the error message is
both irrelevant and out-of-bounds here.
Fixes: 4d1e3e2c40 ("ASoC: cs35l56: Support for reading speaker ID from on-chip GPIOs")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260430101134.2655938-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop the dead runtime PM support which has never been enabled.
Fixes: 96ed3ecde2 ("spi: at91-usart: add power management support")
Cc: Radu Pirea <radu_nicolae.pirea@upb.ro>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429092005.166128-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The error path of cs35l56_runtime_resume_common() should only write
the hibernation sequence if can_hibernate is true.
Something has already gone badly wrong if we ever reach the error
path. But triggering hibernate on hardware that does not support it
is likely to make the situation unrecoverable without a full reboot
because there might not be any hardware signal to exit hibernate.
Fixes: a47cf4dac7 ("ASoC: cs35l56: Change hibernate sequence to use allow auto hibernate")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260429105315.2438298-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When TX is already running (SSCR_SSE is set), the hw_params callback
returns early before setting up DMA parameters for the RX stream. This
prevents the capture path from configuring its DMA data properly.
Move the SSCR_SSE check after DMA parameter setup and format
constraints, so both TX and RX streams get their DMA configuration
regardless of whether the hardware is already enabled. The early return
now only skips the register writes that would disrupt an active stream.
Fixes: fce2174490 ("ASoC: spacemit: add i2s support for K1 SoC")
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260429-k1-i2s-fix-v2-1-8d67835aaddc@linux.spacemit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
GFP_NOWAIT is inappropriate when blkdev_issue_zeroout may sleep and
bio_alloc can fail under pressure; use GFP_NOIO for clear_partition and
vdo_clear_layout zeroout calls.
Signed-off-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fc1d438267 ("dm vdo: save the formatted metadata to disk")
In some situations, direct mappings may need to use different
operation templates.
For instance, when enabling continuous reads, Winbond SPI NANDs no
longer expect address cycles because they would be ignoring them
otherwise. Hence, right after the command opcode, they start counting
dummy cycles, followed by the data cycles as usual.
This breaks the assumptions of "reads from cache" always being done
identically once the best variant has been picked up, across the
lifetime of the system.
In order to support this feature, we must give direct mapping more than
a single operation template to use, in order to switch to using
secondary operations upon request by the upper layer.
Create the concept of optional secondary operation template, which may
or may not be fulfilled by the SPI NAND and SPI NOR cores. If the
underlying SPI controller does not leverage any kind of direct mapping
acceleration, the feature has no impact and can be freely
used. Otherwise, the controller driver needs to opt-in for using this
feature, if supported.
The condition checked to know whether a secondary operation has been
provided or not is to look for a non zero opcode to limit the creation
of extra variables. In practice, the opcode 0x00 exist, but is not
related to any cache related operation.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
As of now, we only use a single operation template when creating SPI
memory direct mappings. With the idea to extend this possibility to 2,
rename the template to reflect that we are currently setting the
"primary" operation, and create a pointer in the same structure to point
to it.
From a user point of view, the op_tmpl name remains but becomes a
pointer, leading to minor changes in both the SPI NAND and SPI NOR
cores.
There is no functional change.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
