This is required by layouts that need to read whole NVMEM content. It's
especially useful for NVMEM devices without hardcoded layout (like
U-Boot environment data block).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231221173421.13737-2-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thanks for layouts refactoring we now have "struct device" associated
with layout. Also its OF pointer points directly to the "nvmem-layout"
DT node.
All it takes to get match data is a generic of_device_get_match_data().
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20231219120104.3422-2-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simply pass whole "struct nvmem_layout" instead of single variables.
There is nothing in "struct nvmem_layout" that we have to hide from
layout drivers. They also access it during .probe() and .remove().
Thanks to this change:
1. API gets more consistent
All layouts drivers callbacks get the same argument
2. Layouts get correct device
Before this change NVMEM core code was passing NVMEM device instead
of layout device. That resulted in:
* Confusing prints
* Calling devm_*() helpers on wrong device
* Helpers like of_device_get_match_data() dereferencing NULLs
3. It gets possible to get match data
First of all nvmem_layout_get_match_data() requires passing "struct
nvmem_layout" which .add_cells() callback didn't have before this. It
doesn't matter much as it's rather useless now anyway (and will be
dropped).
What's more important however is that of_device_get_match_data() can
be used now thanks to owning a proper device pointer.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20231219120104.3422-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
asm-generic/errno-base.h can be replaced by linux/errno.h and the file
will still build correctly. It is an asm-generic file which should be
avoided if possible.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tanzir Hasan <tanzirh@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231226-binderfs-v1-1-66829e92b523@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core can properly handle constant struct bus_type,
move the locomo_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
It's also never used outside of arch/arm/common/locomo.c so make it
static and don't export it as no one is using it.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/2023121905-idiom-opossum-1ba3@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver core now can handle a const struct bus_type pointer, and the
dma_debug_add_bus() call just passes on the pointer give to it to the
driver core, so make this pointer const as well to allow everyone to use
read-only struct bus_type pointers going forward.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <iommu@lists.linux.dev>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/2023121941-dejected-nugget-681e@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to export maple_bus_type as no one uses it outside of
maple.c, so make it static, AND make it const as it can be read-only as
no one modifies it.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: <linux-sh@vger.kernel.org>
Link: https://lore.kernel.org/r/2023121918-rejoicing-frostlike-d976@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A late/optimistic second pull request. The bots have been poking them
since Wednesday without any issues. There are a few fixes in the
ad7091r5 driver as part of rework to enable the ad7091r8 parts that
are included at start of that series.
Includes pre-work for major changes to the DMA buffers that should
land in 6.9 and will greatly improve performance and flexibility for
high performance devices by enabling DMABUF based zero copy transfers
when we don't need to bounce the data via user space.
New device support
------------------
adi,ad7091r8
- Major refactor of existing adi,ad7091r5 driver to separate out useful
shared library code that can be used by I2C and SPI parts.
- Use that library from a new driver supporting the AD7091R-2, AD7091R-4
and AD7091R-8 12-Bit SPI ADCs.
- Series includes some late breaking fixes for the ad7091r5.
microchip,mcp4821
- New driver for MCP4801, MCP4802, MCP4811, MCP4812, MCP4821 and MCP4822
I2C single / dual channel DACs.
Cleanup
-------
buffers:
- Use IIO_SEPARATE in place of some hard-coded 0 values.
dma-buffers:
- Simplify things to not use an outgoing queue given it only ever has
up to two elements and we only need to track which is first.
- Split the iio_dma_buffer_fileio_free() function up to make it easier
to read and enable reuse in a series lining up for 6.9
iio.h
- Drop some stale documentation of struct fields that don't exist.
-----BEGIN PGP SIGNATURE-----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=JzXL
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.8
A late/optimistic second pull request. The bots have been poking them
since Wednesday without any issues. There are a few fixes in the
ad7091r5 driver as part of rework to enable the ad7091r8 parts that
are included at start of that series.
Includes pre-work for major changes to the DMA buffers that should
land in 6.9 and will greatly improve performance and flexibility for
high performance devices by enabling DMABUF based zero copy transfers
when we don't need to bounce the data via user space.
New device support
------------------
adi,ad7091r8
- Major refactor of existing adi,ad7091r5 driver to separate out useful
shared library code that can be used by I2C and SPI parts.
- Use that library from a new driver supporting the AD7091R-2, AD7091R-4
and AD7091R-8 12-Bit SPI ADCs.
- Series includes some late breaking fixes for the ad7091r5.
microchip,mcp4821
- New driver for MCP4801, MCP4802, MCP4811, MCP4812, MCP4821 and MCP4822
I2C single / dual channel DACs.
Cleanup
-------
buffers:
- Use IIO_SEPARATE in place of some hard-coded 0 values.
dma-buffers:
- Simplify things to not use an outgoing queue given it only ever has
up to two elements and we only need to track which is first.
- Split the iio_dma_buffer_fileio_free() function up to make it easier
to read and enable reuse in a series lining up for 6.9
iio.h
- Drop some stale documentation of struct fields that don't exist.
* tag 'iio-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: linux/iio.h: fix Excess kernel-doc description warning
MAINTAINERS: Add MAINTAINERS entry for AD7091R
iio: adc: Add support for AD7091R-8
dt-bindings: iio: Add AD7091R-8
iio: adc: Split AD7091R-5 config symbol
iio: adc: ad7091r: Add chip_info callback to get conversion result channel
iio: adc: ad7091r: Set device mode through chip_info callback
iio: adc: ad7091r: Remove unneeded probe parameters
iio: adc: ad7091r: Move chip init data to container struct
iio: adc: ad7091r: Move generic AD7091R code to base driver and header file
iio: adc: ad7091r: Enable internal vref if external vref is not supplied
iio: adc: ad7091r: Allow users to configure device events
iio: dac: driver for MCP4821
dt-bindings: iio: dac: add MCP4821
iio: buffer-dma: split iio_dma_buffer_fileio_free() function
iio: buffer-dma: Get rid of outgoing queue
iio: buffer: Use IIO_SEPARATE instead of a hard-coded 0
Remove the @of_xlate: lines to prevent the kernel-doc warning:
include/linux/iio/iio.h:534: warning: Excess struct member 'of_xlate' description in 'iio_info'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Link: https://lore.kernel.org/r/20231223050556.13948-1-rdunlap@infradead.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD7091R-5 and AD7091R-2/-4/-8 have slightly different register field
layout and due to that require different masks for getting the index of
the channel associated with each read.
Add a callback function so the base driver can get correct channel ID
for each chip variant.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/1f7a40b4839b3a1c3f1a0654a1b329bea870feb6.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD7091R-5 devices have a few modes of operation (sample, command,
autocycle) which are set by writing to configuration register fields.
Follow up patches will add support for AD7091R-2/-4/-8 which don't have
those operation modes nor the register fields for setting them.
Make ad7091r_set_mode() a callback function of AD7091R chip_info struct
so the base driver can appropriately handle each design without having
to check which actual chip is connected.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/5140336980f66c2c45f05895c3b68e2f65fba1c2.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
With the grouping of ad7091r initialization data and callbacks into the
init_info struct, there is no more need to pass the device name and
register map through probe function parameters as those will be available
in the init_info object.
Remove probe parameters that are not needed anymore.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/090a6b461410a374511a8c73659de28b2665f96b.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD7091R designs may differ on their communication protocol and resources
required for proper setup. Extract what is design specific into a
init_info struct so the base driver can use data and callback functions
from that struct rather than checking which specific chip is connected
during device initialization.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/1aca2261e227474dc58ce26442845947bcde9b14.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some code generic to AD7091R devices such as channel definitions were in
the AD7091R-5 driver. There was also some generic register definitions
declared in the base driver which would make more sense to be in the
header file.
The device state struct will be needed for the ad7091r8 driver in a
follow up patch so that ought to be moved to the header file as well.
Lastly, a couple of regmap callback functions are also capable of
abstracting characteristics of different AD7091R devices and those are
now being exported to IIO_AD7091R name space.
Move AD7091R generic code either to the base driver or to the header
file so both the ad7091r5 and the ad7091r8 driver can use those
declaration in follow up patches.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/6376fc523ee503d47ec499e2cd2ef13bfb5fd8ba.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADC needs a voltage reference to work correctly.
Users can provide an external voltage reference or use the chip internal
reference to operate the ADC.
The availability of an in chip reference for the ADC saves the user from
having to supply an external voltage reference, which makes the external
reference an optional property as described in the device tree
documentation.
Though, to use the internal reference, it must be enabled by writing to
the configuration register.
Enable AD7091R internal voltage reference if no external vref is supplied.
Fixes: 260442cc5b ("iio: adc: ad7091r5: Add scale and external VREF support")
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/b865033fa6a4fc4bf2b4a98ec51a6144e0f64f77.1703013352.git.marcelo.schmitt1@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD7091R-5 devices are supported by the ad7091r-5 driver together with
the ad7091r-base driver. Those drivers declared iio events for notifying
user space when ADC readings fall bellow the thresholds of low limit
registers or above the values set in high limit registers.
However, to configure iio events and their thresholds, a set of callback
functions must be implemented and those were not present until now.
The consequence of trying to configure ad7091r-5 events without the
proper callback functions was a null pointer dereference in the kernel
because the pointers to the callback functions were not set.
Implement event configuration callbacks allowing users to read/write
event thresholds and enable/disable event generation.
Since the event spec structs are generic to AD7091R devices, also move
those from the ad7091r-5 driver the base driver so they can be reused
when support for ad7091r-2/-4/-8 be added.
Fixes: ca69300173 ("iio: adc: Add support for AD7091R5 ADC")
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/59552d3548dabd56adc3107b7b4869afee2b0c3c.1703013352.git.marcelo.schmitt1@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use kernel-doc format for functions that have comments that begin
with "/**".
This prevents 6 kernel-doc warnings.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231222052521.14333-3-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kernel-doc format for functions that are almost complete in their
kernel-doc comments.
For other functions, just change the comment to a common C comment.
This prevents 7 kernel-doc warnings.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231222052521.14333-2-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kernel-doc format for functions that have comments that begin
with "/**".
This prevents 26 kernel-doc warnings.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231222052521.14333-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231221144447.2762077-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new Counter tool is introduced to provide a generic and flexible way
to watch Counter device events from userspace.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZYWSpAAKCRC1SFbKvhIj
Kw8RAQDKJqndjeOWRHQUGaUVyEO0q/15tipKSI4GiDgtY8ITewEAqmvlbfw6Nm1y
WZALVgUGHcFbsqci+QGkPoNSwGIEyAo=
=3PrP
-----END PGP SIGNATURE-----
Merge tag 'counter-updates-for-6.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
First set of Counter updates for the 6.8 cycle
A new Counter tool is introduced to provide a generic and flexible way
to watch Counter device events from userspace.
* tag 'counter-updates-for-6.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
tools/counter: Remove unneeded semicolon
tools/counter: Fix spelling mistake "componend" -> "component"
MAINTAINERS: add myself as counter watch events tool maintainer
tools/counter: add a flexible watch events tool
Not sure if it's too late for 6.8 rc1, but I try to speed up this
intermediate change.
- Uwe's change convert to new platform remove callback.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCZYV/xRMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIzaMugA/1vWd3k92zEOXIRspg1OJR2e+0X8fMh/
plwNJFWnPcAOAQD3fdKgMtONh0kHIYY14lj707QJouNTnDbKhEiArHlxDQ==
=SMLc
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.8-rc1 second part
Not sure if it's too late for 6.8 rc1, but I try to speed up this
intermediate change.
- Uwe's change convert to new platform remove callback.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: zynq-fpga: Convert to platform remove callback returning void
fpga: xilinx-pr-decoupler: Convert to platform remove callback returning void
fpga: stratix10-soc: Convert to platform remove callback returning void
fpga: socfpga-a10: Convert to platform remove callback returning void
fpga: of-fpga-region: Convert to platform remove callback returning void
fpga: intel-m10-bmc-sec-update: Convert to platform remove callback returning void
fpga: dfl-fme-region: Convert to platform remove callback returning void
fpga: dfl-fme-main: Convert to platform remove callback returning void
fpga: dfl-fme-br: Convert to platform remove callback returning void
fpga: dfl-afu-main: Convert to platform remove callback returning void
fpga: altera-hps2fpga: Convert to platform remove callback returning void
fpga: altera-freeze-bridge: Convert to platform remove callback returning void
fpga: altera-fpga2sdram: Convert to platform remove callback returning void
This pull request contains the interconnect changes for the 6.8-rc1 merge
window. These are just driver changes with the following highlights:
Driver changes:
- New interconnect driver for the SM8650 platform.
- New interconnect driver for the SM6115 platform.
- New interconnect driver for the X1E80100 (Snapdragon X Elite) platform.
- Add compatible string for the BWMONv4 instance on the QCM2290 platform.
- Complete the platform drivers conversion to the .remove_new callback
returning void (mostly iMX, Exynos and the rest of Qcom drivers).
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJlhV2fAAoJEIDQzArG2BZjH4QQAKGDpugAfDav78AbXHdBeYty
H7mKx2h8UQ5nNLI8f5itZX0XJoplLruts8vB3hITb4898clBH0FXPg71ttj/DrZV
hdx30Sn+GsKmD9JpxL2EpeUX/jorp/YvgT0JVvgm8pCCqJR6yUZA65nY9lPOIbzJ
4HknrJ+bpg1QtAFntXI5S8OhPYvHRbvOh7+Ra1cOKd2O0omiZqQdRUfQOXZUVqtN
6hhVzp5kC8QLOl3ehmOKrItSeZ9oO3eUwUbjNMzIrdieT4A/ibE5CfBDiC+r0NFE
7FLCONLWOJ/y0tefm9+HjQh10byTBADQYNUJYhBr0Vi2GgOA4ZJ72HbP6FGy87f0
NIc5JPTFxUyniZjbmX3LHvsD6YyeKrx/B3l13xhPZrMd7srz4Wc0dTcHVEWB/FHF
fGB8LvnRwoaPZ+CTP3AVuiUpYzty1US98ALtHCYtBsXJS8O8NqywitWsZFkx59Oq
2z0CcjGXSVDzNNm+iZcj8Fhrh5qDdxtTQk1QJgg1922ERRte5b5foMheKqAvbYbl
lpj/TNG0EqUu7ESFWCe6b3aJF6FDfWj9NhRDvf7UH8eYoyXr3ENsCVeB2nWL9+6x
+H4pnocGIjDi3JBX/nH4bd5rH4aBke8nmUSWJYFQ81TDpMH/NQ9o0IiX4qwENc/3
Ru3AsYeJAWRDZ1AYf/et
=WEns
-----END PGP SIGNATURE-----
Merge tag 'icc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.8
This pull request contains the interconnect changes for the 6.8-rc1 merge
window. These are just driver changes with the following highlights:
Driver changes:
- New interconnect driver for the SM8650 platform.
- New interconnect driver for the SM6115 platform.
- New interconnect driver for the X1E80100 (Snapdragon X Elite) platform.
- Add compatible string for the BWMONv4 instance on the QCM2290 platform.
- Complete the platform drivers conversion to the .remove_new callback
returning void (mostly iMX, Exynos and the rest of Qcom drivers).
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: sm6115: Fix up includes
dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM6115 bwmon instance
interconnect: qcom: Add SM6115 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm SM6115 NoC
interconnect: qcom: Add X1E80100 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm X1E80100 SoC
dt-bindings: interconnect: qcom-bwmon: document SM8650 BWMONs
interconnect: qcom: introduce RPMh Network-On-Chip Interconnect on SM8650 SoC
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm SM8650 SoC
interconnect: exynos: Convert to platform remove callback returning void
interconnect: qcom/smd-rpm: Convert to platform remove callback returning void
interconnect: qcom/osm-l3: Convert to platform remove callback returning void
interconnect: qcom/msm8974: Convert to platform remove callback returning void
interconnect: imx8mq: Convert to platform remove callback returning void
interconnect: imx8mp: Convert to platform remove callback returning void
interconnect: imx8mn: Convert to platform remove callback returning void
interconnect: imx8mm: Convert to platform remove callback returning void
interconnect: qcom: Make qnoc_remove return void
Adds driver for the MCP48xx series of DACs.
Device uses a simplex SPI channel. To set the value of an output channel,
a 16-bit data of following format must be written:
Bit field | Description
15 [MSB] | Channel selection bit
0 -> Channel A
1 -> Channel B
13 | Output Gain Selection bit
0 -> 2x Gain (Vref = 4.096V)
1 -> 1x Gain (Vref = 2.048V)
12 | Output Shutdown Control bit
0 -> Shutdown the selected channel
1 -> Active mode operation
11-0 [LSB]| DAC Input Data bits
Value's big endian representation is taken as input for the
selected DAC channel. For devices with a resolution of less
than 12-bits, only the x most significant bits are considered
where x is the resolution of the device.
Reference: Page#22 [MCP48x2 Datasheet]
Supported devices:
+---------+--------------+-------------+
| Device | Resolution | Channels |
|---------|--------------|-------------|
| MCP4801 | 8-bit | 1 |
| MCP4802 | 8-bit | 2 |
| MCP4811 | 10-bit | 1 |
| MCP4812 | 10-bit | 2 |
| MCP4821 | 12-bit | 1 |
| MCP4822 | 12-bit | 2 |
+---------+--------------+-------------+
Devices tested:
MCP4821 [12-bit single channel]
MCP4802 [8-bit dual channel]
Tested on Raspberry Pi Zero 2W
Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/22244B.pdf #MCP48x1
Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/20002249B.pdf #MCP48x2
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Link: https://lore.kernel.org/r/20231220151954.154595-2-anshulusr@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/e63d4155f96f3504f7e3d6a4775c3807c90dd6ce.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/3e37e7cf91749fbaba67619f4ffc6a9a7352a671.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/ab8328e82109b6ef14b2ad59889aee5f99264435.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/da701d72522dde185becc15096342786a3a12153.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/1ff30f297310bf048af567924c0fd4cb7c6c3240.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/8d7b192ade744a70da4d7bc681ee4e00f9d04ba9.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/13187db1642f81f04e55be0a26045f09ccc95d37.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/438bb4797984fbfd0cef501010a64fa1e42ad9f4.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/be0728ae8e047c6b443492dc563cf92f397b269d.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/351a4508a2feeba05b2c311fa8596ca1ad77f467.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/7a56558f7e5aa34bf0b21d22f9036a136a2b7322.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/7f4fcb23b25400c6711848105823081e032c5266.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/017b9e17a0c88b2a633467633d304639e7765926.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
This change splits the logic into a separate function, which will be
re-used later.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231219175009.65482-3-paul@crapouillou.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The buffer-dma code was using two queues, incoming and outgoing, to
manage the state of the blocks in use.
While this totally works, it adds some complexity to the code,
especially since the code only manages 2 blocks. It is much easier to
just check each block's state manually, and keep a counter for the next
block to dequeue.
Since the new DMABUF based API wouldn't use the outgoing queue anyway,
getting rid of it now makes the upcoming changes simpler.
With this change, the IIO_BLOCK_STATE_DEQUEUED is now useless, and can
be removed.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231219175009.65482-2-paul@crapouillou.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use an explicit IIO_SEPARATE instead of 0 for the 'shared_by' parameter
when calling __iio_add_chan_devattr().
For some reason, commit 3704432fb1 ("iio: refactor info mask and ext_info
attribute creation.") updated only 1 place out of 4.
Update the remaining ones now.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/1d17f57423172fcb9d9797cfe7c8282f356049c2.1702831285.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
1. Add new AMD AXI 1-wire host driver for AMD programmable logic IP
core.
2. Add support for Analog Devices DS28EC20 EEPROM to existing DS2433
driver.
3. Few cleanups in W1 GPIO driver.
-----BEGIN PGP SIGNATURE-----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=f1E+
-----END PGP SIGNATURE-----
Merge tag 'w1-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next
Krzysztof writes:
1-Wire bus drivers for v6.8
1. Add new AMD AXI 1-wire host driver for AMD programmable logic IP
core.
2. Add support for Analog Devices DS28EC20 EEPROM to existing DS2433
driver.
3. Few cleanups in W1 GPIO driver.
* tag 'w1-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: ds2433: add support for ds28ec20 eeprom
w1: ds2433: use the kernel bitmap implementation
w1: ds2433: introduce a configuration structure
w1: ds2433: remove unused definitions
w1: ds2490: support block sizes larger than 128 bytes in ds_read_block
w1: amd_axi_w1: Explicitly include correct DT includes
w1: gpio: rename pointer to driver data from pdata to ddata
w1: gpio: Drop unused enable_external_pullup from driver data
w1: gpio: Don't use platform data for driver data
w1: Add AXI 1-wire host driver for AMD programmable logic IP core
dt-bindings: w1: Add AMD AXI w1 host and MAINTAINERS entry
There are two spelling mistakes in the help text. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20231219133015.365943-1-colin.i.king@gmail.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
-----BEGIN PGP SIGNATURE-----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=jH+G
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.8
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
* tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (83 commits)
iio: adc: ad7091r: Align arguments to function call parenthesis
iio: adc: ad7091r: Set alert bit in config register
iio: adc: ad7091r: Pass iio_dev to event handler
scripts: checkpatch: Add __aligned to the list of attribute notes
iio: chemical: add support for Aosong AGS02MA
dt-bindings: iio: chemical: add aosong,ags02ma
dt-bindings: vendor-prefixes: add aosong
iio: accel: bmi088: update comments and Kconfig
dt-bindings: iio: humidity: Add TI HDC302x support
iio: humidity: Add driver for ti HDC302x humidity sensors
iio: ABI: document temperature and humidity peak/trough raw attributes
iio: core: introduce trough info element for minimum values
iio: light: driver for Lite-On ltr390
dt-bindings: iio: light: add ltr390
iio: light: isl76682: remove unreachable code
iio: pressure: driver for Honeywell HSC/SSC series
dt-bindings: iio: pressure: add honeywell,hsc030
doc: iio: Document intensity scale as poorly defined
dt-bindings: iio: temperature: add MLX90635 device
iio: temperature: mlx90635 MLX90635 IR Temperature sensor
...
