This is required by layouts that need to read whole NVMEM content. It's
especially useful for NVMEM devices without hardcoded layout (like
U-Boot environment data block).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231221173421.13737-2-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thanks for layouts refactoring we now have "struct device" associated
with layout. Also its OF pointer points directly to the "nvmem-layout"
DT node.
All it takes to get match data is a generic of_device_get_match_data().
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20231219120104.3422-2-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simply pass whole "struct nvmem_layout" instead of single variables.
There is nothing in "struct nvmem_layout" that we have to hide from
layout drivers. They also access it during .probe() and .remove().
Thanks to this change:
1. API gets more consistent
All layouts drivers callbacks get the same argument
2. Layouts get correct device
Before this change NVMEM core code was passing NVMEM device instead
of layout device. That resulted in:
* Confusing prints
* Calling devm_*() helpers on wrong device
* Helpers like of_device_get_match_data() dereferencing NULLs
3. It gets possible to get match data
First of all nvmem_layout_get_match_data() requires passing "struct
nvmem_layout" which .add_cells() callback didn't have before this. It
doesn't matter much as it's rather useless now anyway (and will be
dropped).
What's more important however is that of_device_get_match_data() can
be used now thanks to owning a proper device pointer.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20231219120104.3422-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver core now can handle a const struct bus_type pointer, and the
dma_debug_add_bus() call just passes on the pointer give to it to the
driver core, so make this pointer const as well to allow everyone to use
read-only struct bus_type pointers going forward.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <iommu@lists.linux.dev>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/2023121941-dejected-nugget-681e@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to export maple_bus_type as no one uses it outside of
maple.c, so make it static, AND make it const as it can be read-only as
no one modifies it.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: <linux-sh@vger.kernel.org>
Link: https://lore.kernel.org/r/2023121918-rejoicing-frostlike-d976@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A late/optimistic second pull request. The bots have been poking them
since Wednesday without any issues. There are a few fixes in the
ad7091r5 driver as part of rework to enable the ad7091r8 parts that
are included at start of that series.
Includes pre-work for major changes to the DMA buffers that should
land in 6.9 and will greatly improve performance and flexibility for
high performance devices by enabling DMABUF based zero copy transfers
when we don't need to bounce the data via user space.
New device support
------------------
adi,ad7091r8
- Major refactor of existing adi,ad7091r5 driver to separate out useful
shared library code that can be used by I2C and SPI parts.
- Use that library from a new driver supporting the AD7091R-2, AD7091R-4
and AD7091R-8 12-Bit SPI ADCs.
- Series includes some late breaking fixes for the ad7091r5.
microchip,mcp4821
- New driver for MCP4801, MCP4802, MCP4811, MCP4812, MCP4821 and MCP4822
I2C single / dual channel DACs.
Cleanup
-------
buffers:
- Use IIO_SEPARATE in place of some hard-coded 0 values.
dma-buffers:
- Simplify things to not use an outgoing queue given it only ever has
up to two elements and we only need to track which is first.
- Split the iio_dma_buffer_fileio_free() function up to make it easier
to read and enable reuse in a series lining up for 6.9
iio.h
- Drop some stale documentation of struct fields that don't exist.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmWQCpURHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0FojRBRAAvLHuZ3j9QaFWWFPZqcPnKMeXc//VCycW
+Mzlx4O8nC6gYqB5SVvJiEf+lB25wBXNcolme9v3RdM88WZ+plbosogkApV6g3y3
ox1Bg2vRPot0yxVpIn6rm5x0mHiRK3abramoPT4FIpx02biYuatOg8oWYnOuo320
O26F5ewYSdX/lJcpq1WhIJmRU/rwW0yQZsGGXWdT4IN/URQl0e+NzqUUFBFT+N1p
vnjymdRn6pKEnMAAWLJES0dnyZ5q0UyYNi7VEvKz+i7baXcTcoWnsmgun0ubPnKF
HYYNuPUnW6inh8A2mfjcZw7ToUeR5H0Eepz+/N0fil+uvFZmiu5/Yge3U2YHx3+5
YU/5rcvg874FN81HlaRjo5i0jUrLfApAKjYODaqLOhOT0cVbmEoYfBWVbCQ+SbV3
RdTeoQtv5a6GOmnnxjk0yblZOvqnZapgZKJn6BbJqZb3muRscpLOrdGeA57f9/n7
c6/SQ0wmMzBl2Xv4+XJTniHmS1r8p05zUp3e3bPerRLIcRBc7Pfm8cqqL09ftX1f
9taH3Nt8ghiRdES7zbrFpZOlfNM7YlX/4ThCY3M35V317fdc5bWu1npOWerNjVbR
GORKD5lVpXHS8mYQOrSQjzDM2BBxSud74YZBv91x2E6z2dr3HjospI6rgObhyzIz
VhV8Ax+7NWc=
=JzXL
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.8
A late/optimistic second pull request. The bots have been poking them
since Wednesday without any issues. There are a few fixes in the
ad7091r5 driver as part of rework to enable the ad7091r8 parts that
are included at start of that series.
Includes pre-work for major changes to the DMA buffers that should
land in 6.9 and will greatly improve performance and flexibility for
high performance devices by enabling DMABUF based zero copy transfers
when we don't need to bounce the data via user space.
New device support
------------------
adi,ad7091r8
- Major refactor of existing adi,ad7091r5 driver to separate out useful
shared library code that can be used by I2C and SPI parts.
- Use that library from a new driver supporting the AD7091R-2, AD7091R-4
and AD7091R-8 12-Bit SPI ADCs.
- Series includes some late breaking fixes for the ad7091r5.
microchip,mcp4821
- New driver for MCP4801, MCP4802, MCP4811, MCP4812, MCP4821 and MCP4822
I2C single / dual channel DACs.
Cleanup
-------
buffers:
- Use IIO_SEPARATE in place of some hard-coded 0 values.
dma-buffers:
- Simplify things to not use an outgoing queue given it only ever has
up to two elements and we only need to track which is first.
- Split the iio_dma_buffer_fileio_free() function up to make it easier
to read and enable reuse in a series lining up for 6.9
iio.h
- Drop some stale documentation of struct fields that don't exist.
* tag 'iio-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: linux/iio.h: fix Excess kernel-doc description warning
MAINTAINERS: Add MAINTAINERS entry for AD7091R
iio: adc: Add support for AD7091R-8
dt-bindings: iio: Add AD7091R-8
iio: adc: Split AD7091R-5 config symbol
iio: adc: ad7091r: Add chip_info callback to get conversion result channel
iio: adc: ad7091r: Set device mode through chip_info callback
iio: adc: ad7091r: Remove unneeded probe parameters
iio: adc: ad7091r: Move chip init data to container struct
iio: adc: ad7091r: Move generic AD7091R code to base driver and header file
iio: adc: ad7091r: Enable internal vref if external vref is not supplied
iio: adc: ad7091r: Allow users to configure device events
iio: dac: driver for MCP4821
dt-bindings: iio: dac: add MCP4821
iio: buffer-dma: split iio_dma_buffer_fileio_free() function
iio: buffer-dma: Get rid of outgoing queue
iio: buffer: Use IIO_SEPARATE instead of a hard-coded 0
Remove the @of_xlate: lines to prevent the kernel-doc warning:
include/linux/iio/iio.h:534: warning: Excess struct member 'of_xlate' description in 'iio_info'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Link: https://lore.kernel.org/r/20231223050556.13948-1-rdunlap@infradead.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This pull request contains the interconnect changes for the 6.8-rc1 merge
window. These are just driver changes with the following highlights:
Driver changes:
- New interconnect driver for the SM8650 platform.
- New interconnect driver for the SM6115 platform.
- New interconnect driver for the X1E80100 (Snapdragon X Elite) platform.
- Add compatible string for the BWMONv4 instance on the QCM2290 platform.
- Complete the platform drivers conversion to the .remove_new callback
returning void (mostly iMX, Exynos and the rest of Qcom drivers).
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=WEns
-----END PGP SIGNATURE-----
Merge tag 'icc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.8
This pull request contains the interconnect changes for the 6.8-rc1 merge
window. These are just driver changes with the following highlights:
Driver changes:
- New interconnect driver for the SM8650 platform.
- New interconnect driver for the SM6115 platform.
- New interconnect driver for the X1E80100 (Snapdragon X Elite) platform.
- Add compatible string for the BWMONv4 instance on the QCM2290 platform.
- Complete the platform drivers conversion to the .remove_new callback
returning void (mostly iMX, Exynos and the rest of Qcom drivers).
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: sm6115: Fix up includes
dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM6115 bwmon instance
interconnect: qcom: Add SM6115 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm SM6115 NoC
interconnect: qcom: Add X1E80100 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm X1E80100 SoC
dt-bindings: interconnect: qcom-bwmon: document SM8650 BWMONs
interconnect: qcom: introduce RPMh Network-On-Chip Interconnect on SM8650 SoC
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm SM8650 SoC
interconnect: exynos: Convert to platform remove callback returning void
interconnect: qcom/smd-rpm: Convert to platform remove callback returning void
interconnect: qcom/osm-l3: Convert to platform remove callback returning void
interconnect: qcom/msm8974: Convert to platform remove callback returning void
interconnect: imx8mq: Convert to platform remove callback returning void
interconnect: imx8mp: Convert to platform remove callback returning void
interconnect: imx8mn: Convert to platform remove callback returning void
interconnect: imx8mm: Convert to platform remove callback returning void
interconnect: qcom: Make qnoc_remove return void
The buffer-dma code was using two queues, incoming and outgoing, to
manage the state of the blocks in use.
While this totally works, it adds some complexity to the code,
especially since the code only manages 2 blocks. It is much easier to
just check each block's state manually, and keep a counter for the next
block to dequeue.
Since the new DMABUF based API wouldn't use the outgoing queue anyway,
getting rid of it now makes the upcoming changes simpler.
With this change, the IIO_BLOCK_STATE_DEQUEUED is now useless, and can
be removed.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231219175009.65482-2-paul@crapouillou.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
1. Add new AMD AXI 1-wire host driver for AMD programmable logic IP
core.
2. Add support for Analog Devices DS28EC20 EEPROM to existing DS2433
driver.
3. Few cleanups in W1 GPIO driver.
-----BEGIN PGP SIGNATURE-----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=f1E+
-----END PGP SIGNATURE-----
Merge tag 'w1-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next
Krzysztof writes:
1-Wire bus drivers for v6.8
1. Add new AMD AXI 1-wire host driver for AMD programmable logic IP
core.
2. Add support for Analog Devices DS28EC20 EEPROM to existing DS2433
driver.
3. Few cleanups in W1 GPIO driver.
* tag 'w1-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: ds2433: add support for ds28ec20 eeprom
w1: ds2433: use the kernel bitmap implementation
w1: ds2433: introduce a configuration structure
w1: ds2433: remove unused definitions
w1: ds2490: support block sizes larger than 128 bytes in ds_read_block
w1: amd_axi_w1: Explicitly include correct DT includes
w1: gpio: rename pointer to driver data from pdata to ddata
w1: gpio: Drop unused enable_external_pullup from driver data
w1: gpio: Don't use platform data for driver data
w1: Add AXI 1-wire host driver for AMD programmable logic IP core
dt-bindings: w1: Add AMD AXI w1 host and MAINTAINERS entry
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
-----BEGIN PGP SIGNATURE-----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=jH+G
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.8
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
* tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (83 commits)
iio: adc: ad7091r: Align arguments to function call parenthesis
iio: adc: ad7091r: Set alert bit in config register
iio: adc: ad7091r: Pass iio_dev to event handler
scripts: checkpatch: Add __aligned to the list of attribute notes
iio: chemical: add support for Aosong AGS02MA
dt-bindings: iio: chemical: add aosong,ags02ma
dt-bindings: vendor-prefixes: add aosong
iio: accel: bmi088: update comments and Kconfig
dt-bindings: iio: humidity: Add TI HDC302x support
iio: humidity: Add driver for ti HDC302x humidity sensors
iio: ABI: document temperature and humidity peak/trough raw attributes
iio: core: introduce trough info element for minimum values
iio: light: driver for Lite-On ltr390
dt-bindings: iio: light: add ltr390
iio: light: isl76682: remove unreachable code
iio: pressure: driver for Honeywell HSC/SSC series
dt-bindings: iio: pressure: add honeywell,hsc030
doc: iio: Document intensity scale as poorly defined
dt-bindings: iio: temperature: add MLX90635 device
iio: temperature: mlx90635 MLX90635 IR Temperature sensor
...
========
- Added alignment check for event ring read pointer to avoid the potential
buffer corruption issue.
- Added support for SDX75 modem which takes longer time to enter READY state.
- Added spinlock to protect concurrent access while queuing transfer ring
elements.
- Dropped the read channel lock before invoking the client callback as the
client can potentially queue buffers thus ending up wtih soft lockup.
MHI Endpoint
============
- Used kzalloc() to allocate event ring elements instead of allocating the
elements on the stack, as the endpoint controller trying to queue them may not
be able to use vmalloc memory (using DMA).
- Used slab allocator for allocting the memory for objects used frequently and
are of fixed size.
- Added support for interrupt moderation timer feature which is used by the host
to limit the number of interrupts raised by the device for an event ring.
- Added async read/write DMA support for transferring data between host and the
endpoint. So far MHI EP stack assumed that the data will be transferred
synchronously (i.e., it sends completion once the transfer APIs are returned).
But this impacts the throughput if the controller is using DMA to do the
transfer.
So to add async suport, existing sync transfer APIs are renamed to
{read/write}_sync and also introduced two new APIs {read/write}_async for
carrying out the async transfer.
Controllers implementing the async APIs should queue the buffers and return
immediately without waiting for transfer completion. Once the transfer
completion happens later, they should invoke the completion callback so that
the MHI EP stack can send the completion event to the host.
The controller driver patches (PCI EPF) for this async support are also merged
to the MHI tree with Acks from PCI maintainers.
- Fixed the DMA channel direction in error path of the PCI EPF driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmWAUzEACgkQVZ8R5v6R
zvX6kQf/T3vG4seI9u+pUEmkmtF0ilmbyFqgcoGQPgED736uNQo8jKhpVuz8gqmg
nfHDXP36dzpUL5ycVqDT8RwGfL1qqCNS65p0mGeheXwoAeapzEjU4Asopq1b6gXm
PE3/yjIzyMqBWBE/y6Ubms3ptNq1TPqU8mQ1HImhkPOfaVGxB0TGy4kfSwlO3ufY
RQ2qmfnXB28rslmEi28Wi9iuYSroKGT1zBj3a4mb4TlJ2RJMNjlGhvpuXZbLLqlh
1FA6DZRs4U2eM4MNsq/klxXLMBG4HCsKLkPZpZwgKrLlNSirAC3DKSAUlE8W6WHp
kJB/3dx0rVgRHYx/Z0epWKUWmnAXXA==
=1NzX
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
- Added alignment check for event ring read pointer to avoid the potential
buffer corruption issue.
- Added support for SDX75 modem which takes longer time to enter READY state.
- Added spinlock to protect concurrent access while queuing transfer ring
elements.
- Dropped the read channel lock before invoking the client callback as the
client can potentially queue buffers thus ending up wtih soft lockup.
MHI Endpoint
============
- Used kzalloc() to allocate event ring elements instead of allocating the
elements on the stack, as the endpoint controller trying to queue them may not
be able to use vmalloc memory (using DMA).
- Used slab allocator for allocting the memory for objects used frequently and
are of fixed size.
- Added support for interrupt moderation timer feature which is used by the host
to limit the number of interrupts raised by the device for an event ring.
- Added async read/write DMA support for transferring data between host and the
endpoint. So far MHI EP stack assumed that the data will be transferred
synchronously (i.e., it sends completion once the transfer APIs are returned).
But this impacts the throughput if the controller is using DMA to do the
transfer.
So to add async suport, existing sync transfer APIs are renamed to
{read/write}_sync and also introduced two new APIs {read/write}_async for
carrying out the async transfer.
Controllers implementing the async APIs should queue the buffers and return
immediately without waiting for transfer completion. Once the transfer
completion happens later, they should invoke the completion callback so that
the MHI EP stack can send the completion event to the host.
The controller driver patches (PCI EPF) for this async support are also merged
to the MHI tree with Acks from PCI maintainers.
- Fixed the DMA channel direction in error path of the PCI EPF driver.
* tag 'mhi-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: Drop chan lock before queuing buffers
bus: mhi: host: Add spinlock to protect WP access when queueing TREs
PCI: epf-mhi: Fix the DMA data direction of dma_unmap_single()
bus: mhi: ep: Add checks for read/write callbacks while registering controllers
bus: mhi: ep: Add support for async DMA read operation
bus: mhi: ep: Add support for async DMA write operation
PCI: epf-mhi: Enable MHI async read/write support
PCI: epf-mhi: Add support for DMA async read/write operation
PCI: epf-mhi: Simulate async read/write using iATU
bus: mhi: ep: Introduce async read/write callbacks
bus: mhi: ep: Rename read_from_host() and write_to_host() APIs
bus: mhi: ep: Pass mhi_ep_buf_info struct to read/write APIs
bus: mhi: ep: Add support for interrupt moderation timer
bus: mhi: ep: Use slab allocator where applicable
bus: mhi: host: Add alignment check for event ring read pointer
bus: mhi: host: pci_generic: Add SDX75 based modem support
bus: mhi: host: Add a separate timeout parameter for waiting ready
bus: mhi: ep: Do not allocate event ring element on stack
As per the current code base, PM_CLOCK_SETRATE and PM_CLOCK_GETRATE
APIs are not supported for the runtime operations. In the case of
ZynqMP returning an error from TF-A when there is any request to
access these APIs and for Versal also it is returning an error like
NO_ACCESS from the firmware. So, just removing the unused code to
avoid the confusion around these APIs.
Also, there is no issue with the backward compatibility as these APIs
were never used since implemented. Hence no need to bump up the
version of the feature check API as well.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/6ccbffbafd1f0f48f6574d5a3bf2db6a5603fdb0.1702565618.git.michal.simek@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Utilize the managed resource (devres) framework and add the following
devm_* helpers for the SPMI driver:
- devm_spmi_controller_alloc()
- devm_spmi_controller_add()
[sboyd@kernel.org: Rename to spmi-devres for module niceness, slap on
GPL module license]
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20230824104101.4083400-2-fshao@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231206231733.4031901-4-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
in order to support NEW chip rts5264, the definitions of some internal
registers are define in new file rts5264.h, and some callback functions
and the workflow for rts5264 are define in new file rts5264.c
also add rts5264.o to Makefile
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20231208032145.2143580-2-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All of the other constants in this file are defined using enums, so make
the constants more consistent by defining the ioctls in an enum as well.
This is necessary for Rust Binder since the _IO macros are too
complicated for bindgen to see that they expand to integer constants.
Replacing the #defines with an enum forces bindgen to evaluate them
properly, which allows us to access them from Rust.
I originally intended to include this change in the first patch of the
Rust Binder patchset [1], but at plumbers Carlos Llamas told me that
this change has been discussed previously [2] and suggested that I send
it upstream separately.
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-1-08ba9197f637@google.com/ [1]
Link: https://lore.kernel.org/all/YoIK2l6xbQMPGZHy@kroah.com/ [2]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231208152801.3425772-1-aliceryhl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current layout support was initially written without modules support in
mind. When the requirement for module support rose, the existing base
was improved to adopt modularization support, but kind of a design flaw
was introduced. With the existing implementation, when a storage device
registers into NVMEM, the core tries to hook a layout (if any) and
populates its cells immediately. This means, if the hardware description
expects a layout to be hooked up, but no driver was provided for that,
the storage medium will fail to probe and try later from
scratch. Even if we consider that the hardware description shall be
correct, we could still probe the storage device (especially if it
contains the rootfs).
One way to overcome this situation is to consider the layouts as
devices, and leverage the native notifier mechanism. When a new NVMEM
device is registered, we can populate its nvmem-layout child, if any,
and wait for the matching to be done in order to get the cells (the
waiting can be easily done with the NVMEM notifiers). If the layout
driver is compiled as a module, it should automatically be loaded. This
way, there is no strong order to enforce, any NVMEM device creation
or NVMEM layout driver insertion will be observed as a new event which
may lead to the creation of additional cells, without disturbing the
probes with costly (and sometimes endless) deferrals.
In order to achieve that goal we create a new bus for the nvmem-layouts
with minimal logic to match nvmem-layout devices with nvmem-layout
drivers. All this infrastructure code is created in the layouts.c file.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111536.316972-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This hook is meant to be used by any provider and instantiating a layout
just for this is useless. Let's instead move this hook to the nvmem
device and add it to the config structure to be easily shared by the
providers.
While at moving this hook, rename it ->fixup_dt_cell_info() to clarify
its main intended purpose.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111536.316972-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The layout entry is not used and will anyway be made useless by the new
layout bus infrastructure coming next, so drop it. While at it, clarify
the kdoc entry.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111536.316972-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nvmem-consumer.h is included by consumer devices, extracting data from
NVMEM devices whereas nvmem-provider.h is included by devices providing
NVMEM content.
The only users of of_nvmem_layout_get_container() outside of the core
are layout drivers, so better move its prototype to nvmem-provider.h.
While we do so, we also move the kdoc associated with the function to
the header rather than the .c file.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111536.316972-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This helper is really handy to create unique device names based on their
device tree path, we may need it outside of the OF core (in the NVMEM
subsystem) so let's export it. As this helper has nothing patform
specific, let's move it to of/device.c instead of of/platform.c so we
can add its prototype to of_device.h.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111536.316972-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to optimize the data transfer, let's use the async DMA operation
for writing (queuing) data to the host.
In the async path, the completion event for the transfer ring will only be
sent to the host when the controller driver notifies the MHI stack of the
actual transfer completion using the callback (mhi_ep_skb_completion)
supplied in "struct mhi_ep_buf_info".
Also to accommodate the async operation, the transfer ring read offset
(ring->rd_offset) is cached in the "struct mhi_ep_chan" and updated locally
to let the stack queue further ring items to the controller driver. But the
actual read offset of the transfer ring will only be updated in the
completion callback.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
These callbacks can be implemented by the controller drivers to perform
async read/write operation that increases the throughput.
For aiding the async operation, a completion callback is also introduced.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In the preparation for adding async API support, let's rename the existing
APIs to read_sync() and write_sync() to make it explicit that these APIs
are used for synchronous read/write.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In the preparation of DMA async support, let's pass the parameters to
read_from_host() and write_to_host() APIs using mhi_ep_buf_info structure.
No functional change.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Use slab allocator for allocating the memory for objects used frequently
and are of fixed size. This reduces the overheard associated with
kmalloc().
Suggested-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20231018122812.47261-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Some devices(eg. SDX75) take longer than expected (default, 8 seconds) to
set ready after reboot. Hence add optional ready timeout parameter and pass
the appropriate timeout value to mhi_poll_reg_field() to wait enough for
device ready as part of power up sequence.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1699344890-87076-2-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Updates for the hwtracing subsystem includes :
- Support for CoreSight TPDM DSB set
- Support for tuning Cycle count Threshold for CoreSight ETM via perf
- Support for TRBE on ACPI based systems
- Support for choosing buffer mode in ETR for sysfs mode
- Improvements to HiSilicon PTT driver
- Cleanups to Ultrasoc SMB driver
- Cleanup .remove callback for various Coresight platform drivers
- Remove Leo Yan from Reviewers
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=7+gH
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for Linux v6.8
Updates for the hwtracing subsystem includes :
- Support for CoreSight TPDM DSB set
- Support for tuning Cycle count Threshold for CoreSight ETM via perf
- Support for TRBE on ACPI based systems
- Support for choosing buffer mode in ETR for sysfs mode
- Improvements to HiSilicon PTT driver
- Cleanups to Ultrasoc SMB driver
- Cleanup .remove callback for various Coresight platform drivers
- Remove Leo Yan from Reviewers
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (32 commits)
coresight: ultrasoc-smb: Use guards to cleanup
coresight: ultrasoc-smb: Convert to platform remove callback returning void
coresight: trbe: Convert to platform remove callback returning void
coresight: replicator: Convert to platform remove callback returning void
coresight: funnel: Convert to platform remove callback returning void
coresight: etm4x: Convert to platform remove callback returning void
coresight: dummy: Convert to platform remove callback returning void
coresight: etm4x: Fix width of CCITMIN field
coresight-tpdm: Correct the property name of MSR number
hwtracing: hisi_ptt: Optimize the trace data committing
hwtracing: hisi_ptt: Disable interrupt after trace end
Documentation: ABI: coresight-tpdm: Fix Bit[3] description indentation
coresight-tpdm: Add nodes for dsb msr support
dt-bindings: arm: Add support for DSB MSR register
coresight-tpdm: Add nodes for timestamp request
coresight-tpdm: Add nodes to configure pattern match output
coresight-tpdm: Add nodes for dsb edge control
coresight-tpdm: Add node to set dsb programming mode
coresight-tpdm: Add nodes to set trigger timestamp and type
coresight-tpdm: Add reset node to TPDM node
...
The IIO_CHAN_INFO_PEAK info element is used for maximum values and
currently there is no equivalent for minimum values. Instead of
overloading the existing peak info element, a new info element can
be added.
In principle there is no need to add a _TROUGH_SCALE element as the
scale will be the same as the one required for INFO_PEAK, which in
turn is sometimes omitted if a single scale for peaks and raw values
is required.
Add an IIO_CHAN_INFO_TROUGH info element for minimum values.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231211122747.9723-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When reading in_voltage_scale we can get something like:
root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale
0.038146
However, when reading the available options:
root@analog:/sys/bus/iio/devices/iio:device2# cat
in_voltage_scale_available
2000.000000 2100.000006 2200.000007 2300.000008 2400.000009 2500.000010
which does not make sense. Moreover, when trying to set a new scale we
get an error because there's no call to __ad9467_get_scale() to give us
values as given when reading in_voltage_scale. Fix it by computing the
available scales during probe and properly pass the list when
.read_available() is called.
While at it, change to use .read_available() from iio_info. Also note
that to properly fix this, adi-axi-adc.c has to be changed accordingly.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Primarily rtrs and irdma fixes:
- Fix uninitialized value in ib_get_eth_speed()
- Fix hns refusing to work if userspace doesn't select the correct
congestion control algorithm
- Several irdma fixes - unreliable Send Queue Drain, use after free, 64k
page size bugs, device removal races
- Several rtrs bug fixes - crashes, memory leaks, use after free, bad
credit accounting, bogus WARN_ON
- Typos and a MAINTAINER update
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZXMjNwAKCRCFwuHvBreF
YdnyAP9h6dQG+KgIl26q7Bk1AmsmoseZ1HmeGRacdHsW0qgXPwD/XRX/IgNpl465
fdt6Qh877LBEjlMFvyMxFTWG7v1ixwY=
=Tn3a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Primarily rtrs and irdma fixes:
- Fix uninitialized value in ib_get_eth_speed()
- Fix hns refusing to work if userspace doesn't select the correct
congestion control algorithm
- Several irdma fixes - unreliable Send Queue Drain, use after free,
64k page size bugs, device removal races
- Several rtrs bug fixes - crashes, memory leaks, use after free, bad
credit accounting, bogus WARN_ON
- Typos and a MAINTAINER update"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Avoid free the non-cqp_request scratch
RDMA/irdma: Fix support for 64k pages
RDMA/irdma: Ensure iWarp QP queue memory is OS paged aligned
RDMA/core: Fix umem iterator when PAGE_SIZE is greater then HCA pgsz
RDMA/irdma: Fix UAF in irdma_sc_ccq_get_cqe_info()
RDMA/bnxt_re: Correct module description string
RDMA/rtrs-clt: Remove the warnings for req in_use check
RDMA/rtrs-clt: Fix the max_send_wr setting
RDMA/rtrs-srv: Destroy path files after making sure no IOs in-flight
RDMA/rtrs-srv: Free srv_mr iu only when always_invalidate is true
RDMA/rtrs-srv: Check return values while processing info request
RDMA/rtrs-clt: Start hb after path_up
RDMA/rtrs-srv: Do not unconditionally enable irq
MAINTAINERS: Add Chengchang Tang as Hisilicon RoCE maintainer
RDMA/irdma: Add wait for suspend on SQD
RDMA/irdma: Do not modify to SQD on error
RDMA/hns: Fix unnecessary err return when using invalid congest control algorithm
RDMA/core: Fix uninit-value access in ib_get_eth_speed()
Most of the changes are devicetree fixes for NXP, Mediatek, Rockchips
Arm machines as well as Microchip RISC-V, and most of these address
build-time warnings for spec violations and other minor issues. One of
the Mediatek warnings was enabled by default and prevented a clean build.
The ones that address serious runtime issues are all on the i.MX platform:
- a boot time panic on imx8qm
- USB hanging under load on imx8
- regressions on the imx93 ethernet phy
Code fixes include a minor error handling for the i.MX PMU driver, and
a number of firmware driver fixes:
- OP-TEE fix for supplicant based device enumeration, and a new
sysfs attribute to needed to fix a race against userspace
- Arm SCMI fix for possible truncation/overflow in the frequency
computations
- Multiple FF-A fixes for the newly added notification support.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmVzIOMACgkQYKtH/8kJ
UidsiRAAloE2O29o1VxGSpuee5pJVdm1zr+lNfC/6chb+LKu6hXQjZY0IZOQup1p
oId8n+AiunZIDL/iBdMOqp2jWF2O6C9Ns/usdp4+V0RZ7DyjIVbR8E2RYgo/mb76
AxBxJCZVFIgMbqKjc1zg+5UmvGrl3zXAqmANfPDWu7hdbHafpbKz4Jb8iQe2/CKc
PFBrweit/t6icpEmmmRrQfB7EcMPNSOOMdt30PxM+V+uDME4ub4k1a4o0n9zd2LB
p2ZcxL8TX6LJRBRdg5T+QWvoFKHCOk+fVcvGAV28L/npORMrbpG7EHjrEbrhgs3f
PcJtorjTwkjMp2PJlvD7DBV79ViEhtpYA1gNryjoXzMlZe9VHf8oAmH+/oJY7Zv2
kVZwMiNb/eeMET3wG6fcyprkOwq1k0Ri6IHpYkVNvpQDCbEnc28zP2z3FNhoXF8U
PcMmUbClJFR8QJPABm/FRNTh/UDcfxU6TkIFsNbYwLxol4+sAtFV8dHkr6/1vVfX
FTXsYABFG5UAyQCtbbOQ6MuAMSTc4ox5Rh8aBATA/DQZabrWDon1ZU39WLJOarJ3
YB9JmgxkIhYqbh5/bsKgb7srHQwzY2Vgof2iK2PI73eLW9yiTd4ysbwSvnb/UdMP
fKssD6GfqWc340ugycNoorXYvi/N06f7r/u2AtjQzRyNaSnR/4s=
=mw0X
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes are devicetree fixes for NXP, Mediatek, Rockchips
Arm machines as well as Microchip RISC-V, and most of these address
build-time warnings for spec violations and other minor issues. One of
the Mediatek warnings was enabled by default and prevented a clean
build.
The ones that address serious runtime issues are all on the i.MX
platform:
- a boot time panic on imx8qm
- USB hanging under load on imx8
- regressions on the imx93 ethernet phy
Code fixes include a minor error handling for the i.MX PMU driver, and
a number of firmware driver fixes:
- OP-TEE fix for supplicant based device enumeration, and a new sysfs
attribute to needed to fix a race against userspace
- Arm SCMI fix for possible truncation/overflow in the frequency
computations
- Multiple FF-A fixes for the newly added notification support"
* tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (55 commits)
MAINTAINERS: change the S32G2 maintainer's email address.
arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588
ARM: dts: imx28-xea: Pass the 'model' property
ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8-apalis: set wifi regulator to always-on
ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
arm64: dts: imx8ulp: update gpio node name to align with register address
arm64: dts: imx93: update gpio node name to align with register address
arm64: dts: imx93: correct mediamix power
arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup
arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells
arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles
ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru
arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi
firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode
firmware: arm_scmi: Fix frequency truncation by promoting multiplier type
...
The remainder address post-6.6 issues or aren't considered serious enough
to justify backporting.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZXKEfwAKCRDdBJ7gKXxA
jlRpAQCiAp1nSqIz/fOKTzoQRaTDXU/m+C+6ZAXdKLDfvQBhpwEAnxxjZ8IgF+8Z
Klz/GirHX5w5o7jE2wb8iObo1nR75Qo=
=omRq
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"31 hotfixes. Ten of these address pre-6.6 issues and are marked
cc:stable. The remainder address post-6.6 issues or aren't considered
serious enough to justify backporting"
* tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()
nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()
mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI
scripts/gdb: fix lx-device-list-bus and lx-device-list-class
MAINTAINERS: drop Antti Palosaari
highmem: fix a memory copy problem in memcpy_from_folio
nilfs2: fix missing error check for sb_set_blocksize call
kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP
units: add missing header
drivers/base/cpu: crash data showing should depends on KEXEC_CORE
mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions
scripts/gdb/tasks: fix lx-ps command error
mm/Kconfig: make userfaultfd a menuconfig
selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS
mm/damon/core: copy nr_accesses when splitting region
lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly
checkstack: fix printed address
mm/memory_hotplug: fix error handling in add_memory_resource()
mm/memory_hotplug: add missing mem_hotplug_lock
.mailmap: add a new address mapping for Chester Lin
...
Current release - regressions:
- veth: fix packet segmentation in veth_convert_skb_to_xdp_buff
Current release - new code bugs:
- tcp: assorted fixes to the new Auth Option support
Older releases - regressions:
- tcp: fix mid stream window clamp
- tls: fix incorrect splice handling
- ipv4: ip_gre: handle skb_pull() failure in ipgre_xmit()
- dsa: mv88e6xxx: restore USXGMII support for 6393X
- arcnet: restore support for multiple Sohard Arcnet cards
Older releases - always broken:
- tcp: do not accept ACK of bytes we never sent
- require admin privileges to receive packet traces via netlink
- packet: move reference count in packet_sock to atomic_long_t
- bpf:
- fix incorrect branch offset comparison with cpu=v4
- fix prog_array_map_poke_run map poke update
- netfilter:
- 3 fixes for crashes on bad admin commands
- xt_owner: fix race accessing sk->sk_socket, TOCTOU null-deref
- nf_tables: fix 'exist' matching on bigendian arches
- leds: netdev: fix RTNL handling to prevent potential deadlock
- eth: tg3: prevent races in error/reset handling
- eth: r8169: fix rtl8125b PAUSE storm when suspended
- eth: r8152: improve reset and surprise removal handling
- eth: hns: fix race between changing features and sending
- eth: nfp: fix sleep in atomic for bonding offload
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bkyC
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- veth: fix packet segmentation in veth_convert_skb_to_xdp_buff
Current release - new code bugs:
- tcp: assorted fixes to the new Auth Option support
Older releases - regressions:
- tcp: fix mid stream window clamp
- tls: fix incorrect splice handling
- ipv4: ip_gre: handle skb_pull() failure in ipgre_xmit()
- dsa: mv88e6xxx: restore USXGMII support for 6393X
- arcnet: restore support for multiple Sohard Arcnet cards
Older releases - always broken:
- tcp: do not accept ACK of bytes we never sent
- require admin privileges to receive packet traces via netlink
- packet: move reference count in packet_sock to atomic_long_t
- bpf:
- fix incorrect branch offset comparison with cpu=v4
- fix prog_array_map_poke_run map poke update
- netfilter:
- three fixes for crashes on bad admin commands
- xt_owner: fix race accessing sk->sk_socket, TOCTOU null-deref
- nf_tables: fix 'exist' matching on bigendian arches
- leds: netdev: fix RTNL handling to prevent potential deadlock
- eth: tg3: prevent races in error/reset handling
- eth: r8169: fix rtl8125b PAUSE storm when suspended
- eth: r8152: improve reset and surprise removal handling
- eth: hns: fix race between changing features and sending
- eth: nfp: fix sleep in atomic for bonding offload"
* tag 'net-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
vsock/virtio: fix "comparison of distinct pointer types lacks a cast" warning
net/smc: fix missing byte order conversion in CLC handshake
net: dsa: microchip: provide a list of valid protocols for xmit handler
drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group
psample: Require 'CAP_NET_ADMIN' when joining "packets" group
bpf: sockmap, updating the sg structure should also update curr
net: tls, update curr on splice as well
nfp: flower: fix for take a mutex lock in soft irq context and rcu lock
net: dsa: mv88e6xxx: Restore USXGMII support for 6393X
tcp: do not accept ACK of bytes we never sent
selftests/bpf: Add test for early update in prog_array_map_poke_run
bpf: Fix prog_array_map_poke_run map poke update
netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
netfilter: nf_tables: validate family when identifying table via handle
netfilter: nf_tables: bail out on mismatching dynset and set expressions
netfilter: nf_tables: fix 'exist' matching on bigendian arches
netfilter: nft_set_pipapo: skip inactive elements during set walk
netfilter: bpf: fix bad registration on nf_defrag
leds: trigger: netdev: fix RTNL handling to prevent potential deadlock
octeontx2-af: Update Tx link register range
...
Highlights:
- asus-wmi: Solve i8042 filter resource handling, input, and
suspend issues
- wmi: Skip zero instance WMI blocks to avoid issues with
some laptops
- mlxbf-bootctl: Differentiate dev/production keys
- platform/surface: Correct serdev related return value to avoid
leaking errno into userspace
- Error checking fixes
The following is an automated shortlog grouped by driver:
asus-wmi:
- Change q500a_i8042_filter() into a generic i8042-filter
- disable USB0 hub on ROG Ally before suspend
- Filter Volume key presses if also reported via atkbd
- Move i8042 filter install to shared asus-wmi code
mellanox:
- Add null pointer checks for devm_kasprintf()
- Check devm_hwmon_device_register_with_groups() return value
mlxbf-bootctl:
- correctly identify secure boot with development keys
surface: aggregator:
- fix recv_buf() return value
wmi:
- Skip blocks with zero instances
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZXC60QAKCRBZrE9hU+XO
McbwAPwIlGYIdYzUXGVGCrCBq7wtBR8ADfFqIa42hUlkDyZ4tAEA8LgrZutAFwhq
35kVk6FSwrUGuIhX5TkxTxnp814nzwE=
=iiB1
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- Fix i8042 filter resource handling, input, and suspend issues in
asus-wmi
- Skip zero instance WMI blocks to avoid issues with some laptops
- Differentiate dev/production keys in mlxbf-bootctl
- Correct surface serdev related return value to avoid leaking errno
into userspace
- Error checking fixes
* tag 'platform-drivers-x86-v6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/mellanox: Check devm_hwmon_device_register_with_groups() return value
platform/mellanox: Add null pointer checks for devm_kasprintf()
mlxbf-bootctl: correctly identify secure boot with development keys
platform/x86: wmi: Skip blocks with zero instances
platform/surface: aggregator: fix recv_buf() return value
platform/x86: asus-wmi: disable USB0 hub on ROG Ally before suspend
platform/x86: asus-wmi: Filter Volume key presses if also reported via atkbd
platform/x86: asus-wmi: Change q500a_i8042_filter() into a generic i8042-filter
platform/x86: asus-wmi: Move i8042 filter install to shared asus-wmi code
The "NET_DM" generic netlink family notifies drop locations over the
"events" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.
Fix by adding a new field to the generic netlink multicast group
structure that when set prevents non-root users or root without the
'CAP_SYS_ADMIN' capability (in the user namespace owning the network
namespace) from joining the group. Set this field for the "events"
group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the
nature of the information that is shared over this group.
Note that the capability check in this case will always be performed
against the initial user namespace since the family is not netns aware
and only operates in the initial network namespace.
A new field is added to the structure rather than using the "flags"
field because the existing field uses uAPI flags and it is inappropriate
to add a new uAPI flag for an internal kernel check. In net-next we can
rework the "flags" field to use internal flags and fold the new field
into it. But for now, in order to reduce the amount of changes, add a
new field.
Since the information can only be consumed by root, mark the control
plane operations that start and stop the tracing as root-only using the
'GENL_ADMIN_PERM' flag.
Tested using [1].
Before:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
After:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
Failed to join "events" multicast group
[1]
$ cat dm.c
#include <stdio.h>
#include <netlink/genl/ctrl.h>
#include <netlink/genl/genl.h>
#include <netlink/socket.h>
int main(int argc, char **argv)
{
struct nl_sock *sk;
int grp, err;
sk = nl_socket_alloc();
if (!sk) {
fprintf(stderr, "Failed to allocate socket\n");
return -1;
}
err = genl_connect(sk);
if (err) {
fprintf(stderr, "Failed to connect socket\n");
return err;
}
grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events");
if (grp < 0) {
fprintf(stderr,
"Failed to resolve \"events\" multicast group\n");
return grp;
}
err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
if (err) {
fprintf(stderr, "Failed to join \"events\" multicast group\n");
return err;
}
return 0;
}
$ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c
Fixes: 9a8afc8d39 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZXDtiAAKCRDbK58LschI
g1QAAP9SxVT/DsI4SfxmhYgJHgxxmzw4mL96MqnEL9n2D6nOeAEApAjkY5UbhZwC
+bvNPnoP9Tl0h3et8BB08bbRRJLiHAE=
=2sEV
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-12-06
We've added 4 non-merge commits during the last 6 day(s) which contain
a total of 7 files changed, 185 insertions(+), 55 deletions(-).
The main changes are:
1) Fix race found by syzkaller on prog_array_map_poke_run when
a BPF program's kallsym symbols were still missing, from Jiri Olsa.
2) Fix BPF verifier's branch offset comparison for BPF_JMP32 | BPF_JA,
from Yonghong Song.
3) Fix xsk's poll handling to only set mask on bound xsk sockets,
from Yewon Choi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add test for early update in prog_array_map_poke_run
bpf: Fix prog_array_map_poke_run map poke update
xsk: Skip polling event check for unbound socket
bpf: Fix a verifier bug due to incorrect branch offset comparison with cpu=v4
====================
Link: https://lore.kernel.org/r/20231206220528.12093-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct device's .platform_data isn't for drivers to write to. For
driver-specific data there is .driver_data instead.
As there is no in-tree platform that provides w1_gpio_platform_data,
drop the include file and replace it by a local struct w1_gpio_ddata.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/8f7ebe03ddaa5a5c6e2b36fecdf59da7fc373527.1701727212.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Failure to register SGI for firmware event notification is non-fatal error
when feature is not supported by other modules such as Xen and TF-A. Add
_info level log message for such special case.
Also add XST_PM_INVALID_VERSION error code and map it to -EOPNOSUPP Linux
kernel error code. If feature is not supported or EEMI API version is
mismatch, firmware can return XST_PM_INVALID_VERSION = 4 or
XST_PM_NO_FEATURE = 19 error code.
Co-developed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112713.22718-5-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To support feature check for all modules, append the module id of the API
that is being checked to the feature check API so it could be routed to
the target module for processing.
There is no need to check compatible string because the board information
is taken via firmware interface.
Co-developed-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112713.22718-3-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
System-level platform management layer (do_fw_call()) has support for
maximum of 5 arguments as of now (1 EEMI API ID + 4 command arguments).
In order to support new EEMI PM_IOCTL IDs (Secure Read/Write), this
support must be extended to support one additional argument, which
results in a configuration of - 1 EEMI API ID + 5 command arguments.
Update zynqmp_pm_invoke_fn() and do_fw_call() with this new definition
containing variable arguments. As a result, update all the references
to pm invoke function with the updated definition.
Co-developed-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112713.22718-2-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang static checker complains that value stored to 'from' is never read.
And memcpy_from_folio() only copy the last chunk memory from folio to
destination. Use 'to += chunk' to replace 'from += chunk' to fix this
typo problem.
Link: https://lkml.kernel.org/r/20231130034017.1210429-1-suhui@nfschina.com
Fixes: b23d03ef7a ("highmem: add memcpy_to_folio() and memcpy_from_folio()")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
