Delete mode names from the table. They are just redundant data.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the mode search is not string-based anymore, we can drop XxYx24
entries which were just duplicated XxYx32 entries.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eliminate string comparison from the video mode search.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default rate_idx is same for all video modes, no need to keep that
in the table.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
XG45 is not recognized/supported by the driver.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
XG_41 is not listed in xgifb_pci_table, so the code can be safely dropped.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The last man standing justifying the need for populate() is the
sock memcg initialization functions. Now that we are able to pass
a struct mem_cgroup instead of a struct cgroup to the socket
initialization, there is nothing that stops us from initializing
everything in create().
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
CC: Li Zefan <lizefan@huawei.com>
CC: Johannes Weiner <hannes@cmpxchg.org>
CC: Michal Hocko <mhocko@suse.cz>
The only reason cgroup was used, was to be consistent with the populate()
interface. Now that we're getting rid of it, not only we no longer need
it, but we also *can't* call it this way.
Since we will no longer rely on populate(), this will be called from
create(). During create, the association between struct mem_cgroup
and struct cgroup does not yet exist, since cgroup internals hasn't
yet initialized its bookkeeping. This means we would not be able
to draw the memcg pointer from the cgroup pointer in these
functions, which is highly undesirable.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
CC: Li Zefan <lizefan@huawei.com>
CC: Johannes Weiner <hannes@cmpxchg.org>
CC: Michal Hocko <mhocko@suse.cz>
Initialize ModeIdIndex according to the selected video mode. Currently
index 0 is always used and wrong clock data may be used.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete code that has been commented out.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initialize ModeIdIndex according to the selected video mode. Currently
index 0 is always used and wrong video mode data may be used.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete code that has been commented out.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some platforms (e.g. ppc460ex) have 36-bit physical addressing, while
sizeof(unsigned long) == 4. Adapt xgifb driver to use phys_addr_t for
physical address variables instead of unsigned long.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
XGIfb driver transfers integer port number through several typecasts via
pjIOAddress field. Drop that field completely and use vga_base field of
xgifb_info directly.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RelIO field is unused in the driver, drop it.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Image on Z11m cards was totally garbled due to wrong memory being
selected. Add a special handling for Z11m cards. Tested on PCIe Z11 and
Z11m cards.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If gpio_request fails, we need to free all allocated resources.
Current code uses wrong array index to access gpio_data array.
So current code actually frees gpio_data[i].gpio by j times.
This patch moves the error handling code to err_out and thus improves
readability.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
m68k doesn't have memblock_reserve, which causes a build failure
with allmodconfig. Make PERSISTENT_RAM and RAM_CONSOLE depend on
HAVE_MEMBLOCK.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This doesn't happen with the usbip virtual hci module, but another
module wanting to interface with this user space code could cause a
seg-fault by sending data without newlines.
Signed-off-by: Christopher Harvey <charvey@matrox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes the space of the indent to the tab that warning
found by the checkpatch.pl tool.
Signed-off-by: Hitoshi NAKAMORI<hitoshi.nakamori@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch is a resend to fix some typos and comments that
I have found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces existing event logging mechanism from ioctl to debugfs.
This patch replaces previous patch submitted by Chris Kelly. Previous patch can
be found at :-
http://article.gmane.org/gmane.linux.usb.general/60026/
Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. use wd: prefix for all messages
2. fix strings
3. change from dev_dbg to dev_err where appropriate
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function has returned false in both error and success
cases.
1. change return value to int and return appropriate errno
2. use typical Linux kernel error handling.
3. normalize debug messages
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. use only mei_driver_name and remove define MEI_DRIVER_NAME
2. drop MEI_DEV_NAME and assign device name directly
3. drop mei_driver_string, it is not used
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix sparse warning:
'amt_wd_dev' was not declared. Should it be static
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
one instance of bare printk was forgotten in init.c file
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei_wd_set_start_timeout is only used from within wd.c
so remove its declaration from interface.h and mark
it static
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
define pr_fmt macro and remove mei: from the messages
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes a typo that I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes a typo I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Willy Tarreau <willy@meta-x.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes a typo I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes a typo that I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes a typo I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 268a1 "regulator: twl-regulator: Use DIV_ROUND_UP at appropriate places"
introduced an off-by-one bug for setting vsel.
The linear calculation code in twl6030smps_list_voltage() does subtract index
by 1 so we need the vsel++ after DIV_ROUND_UP.
The original code use this trick to differentiate if we are going to set the
voltage to 0 or the voltage falls within the linear calculation range.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
stub_shutdown_connection() and vhci_shutdown_connection() use
task_is_dead() before kthread_stop(). This buys nothing and wrong.
kthread_stop() is fine even if this thread is dead. However, if it
is dead nothing protects this task_struct, we shouldn't touch this
memory.
Change the code to do the necessary get_task_struct/put_task_struct.
This patch assumes that
- xxx_shutdown_connection() is always called, so we can't
leak the task_struct.
- kthread_stop_put() can't be called twice on the same task.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Matt Mooney <mfm@muteddisk.com>,
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In drivers/staging/rtl8192e/rtl8192e/rtl_core.c the follwing printk-message can be found:
printk(KERN_ERR "rtl8193e: Unable to allocate space "
This is quite obviously just a typo, all other similar messages use
"rtl8192e" and the string "rtl8193e" does not occur anywhere else in the
source of the driver.
Signed-off-by: Axel Koellhofer <AxelKoellhofer@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reformated comment blocks to meet Coding Style
Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed some old comments and a few blank lines
Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix some more spacing issues I missed before
Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>