These changes are mostly minor non-urgent fixes for typos and binding checks.
The system-power-controller gets configured for more am3 devices as it's not
am335x-boneblack speicif. For for am437x we add magnetic card reader support.
Note that the asahi-kasei,ak8975 binding changes may produce a new binding
check warning as the binding related change is merged separately.
-----BEGIN PGP SIGNATURE-----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=LVA6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Vsxc
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.17/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.17 merge window
These changes are mostly minor non-urgent fixes for typos and binding checks.
The system-power-controller gets configured for more am3 devices as it's not
am335x-boneblack speicif. For for am437x we add magnetic card reader support.
Note that the asahi-kasei,ak8975 binding changes may produce a new binding
check warning as the binding related change is merged separately.
* tag 'omap-for-v5.17/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x: Use correct vendor prefix for Asahi Kasei Corp.
ARM: dts: motorola-mapphone: Drop second ti,wlcore compatible value
ARM: dts: am437x-gp-evm: enable ADC1
ARM: dts: am43xx: Describe the magnetic reader/ADC1 hardware module
ARM: dts: am437x-cm-t43: Use a correctly spelled DT property
ARM: dts: am335x-icev2: Add system-power-controller to RTC node
ARM: dts: am335x-boneblack-common: move system-power-controller
ARM: dts: elpida_ecb240abacn: Change Elpida compatible
Link: https://lore.kernel.org/r/pull-1639659798-679261@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This will bind to the PMGR pwrstate nodes that control power/clock
gating to SoC blocks. The mailbox driver doesn't do runtime-pm yet, so
initially this will just keep the domain on permanently.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
We decided to keep SoC nodes sorted by address for sanity; fix a couple
that slipped into the wrong place.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
We now know that this frequency comes from the external reference
oscillator and is used for various SoC blocks, and isn't just a random
24MHz clock, so let's call it something more appropriate.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
- Add the LEDs to the Freecom FSG-3 that were missing.
- Add a devicetree for the Gorami MultiLink Router
- Add a devicetree for the Gateway GW7001 Router
This completes the migration of all IXP4xx devices to
device tree files.
Next merge window we will delete the remaining board files,
it cannot be done now because of cross-tree dependencies.
-----BEGIN PGP SIGNATURE-----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=Hzm2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=LdLA
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-dtx-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx DTS changes for v5.17:
- Add the LEDs to the Freecom FSG-3 that were missing.
- Add a devicetree for the Gorami MultiLink Router
- Add a devicetree for the Gateway GW7001 Router
This completes the migration of all IXP4xx devices to
device tree files.
Next merge window we will delete the remaining board files,
it cannot be done now because of cross-tree dependencies.
* tag 'ixp4xx-dtx-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ixp4xx: Add devicetree for Gateway 7001
ARM: dts: Add Goramo MultiLink device tree
ARM: dts: Add FSG3 system controller and LEDs
Link: https://lore.kernel.org/r/CACRpkdYiWK7TEbZrh4_0WT5obMk=ZSc7AQVUSPXL+-uZ_hsUEA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- 2 low priority fixes about pin function for sama7g5 and better
tailored mmc interface on sama5d2 xplained
- Addition of the Microchip EVB-KSZ9477: a Gigabit Ethernet
managed Switch Evaluation Board
- QSPI: addition of sama5d2 clock name and nodes for new sama7g7 and its
associated Evaluation Kit
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYbdvvAAKCRAfOrpwrNPN
DBVFAP9n8QGFvjmhgc5MjMp7cfYziVlRTXW16rejmVHXZIGMOgD/dTj3jffyVGQK
+n9vhUqa+apnVjufzwvy0RpMzRc+iwY=
=8QU6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aUEQ
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT #1 for 5.17:
- 2 low priority fixes about pin function for sama7g5 and better
tailored mmc interface on sama5d2 xplained
- Addition of the Microchip EVB-KSZ9477: a Gigabit Ethernet
managed Switch Evaluation Board
- QSPI: addition of sama5d2 clock name and nodes for new sama7g7 and its
associated Evaluation Kit
* tag 'at91-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5ek: Add QSPI0 node
ARM: dts: at91: sama7g5: Add QSPI nodes
ARM: dts: at91: sama5d2: Name the qspi clock
ARM: dts: at91: add Microchip EVB-KSZ9477 board
ARM: dts: at91: sama5d2_xplained: remove PA11__SDMMC0_VDDSEL from pinctrl
ARM: dts: at91: update alternate function of signal PD20
Link: https://lore.kernel.org/r/20211213161451.90786-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- helios64: hdd-power, pcie, 2.5GbE nic
- spi for rk356x and on the Quartz-A board
- headphone, bluetooth support on Rock Pi4
And some misc soc improvements:
- missing dsi compatible on px30
- pwm pinctrl name on rk356x
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmG3IO8QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgQBQB/0cZ22l3mIAxiFdk0ZJ9jojuZiCXz4A2AUc
WYY8J2m5F+3jGJ50FuXLHw+WZKUqMHs5g0ISmmmqUjnU1nQPcJbpzcj4QkfRmlRJ
GNaMX4K5fxxsW2HQ/e0M5CWSQ5IYbEsEWAnlrW+LYzL+f5Mlwf13SI+kSZdLoZdP
4ZIPfVWovzIdiNlPuqht5tMB7pHvOC5UPIDMbNs8DamOF0VIppRgDODsgpZQ1wkq
D/x5g5dQBh8PGDl758hNSy5uU2fHS2Ghn8ooeGjakax8XhHTfUYEieCp5JI4fr7Y
X336aXG34TGpKivVtowcj+LtGZ+w2A56ZjBsWwxYkh/2GfzPJiRK
=37E1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Qxh/
-----END PGP SIGNATURE-----
Merge tag 'v5.17-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Improvements on a number of boards:
- helios64: hdd-power, pcie, 2.5GbE nic
- spi for rk356x and on the Quartz-A board
- headphone, bluetooth support on Rock Pi4
And some misc soc improvements:
- missing dsi compatible on px30
- pwm pinctrl name on rk356x
* tag 'v5.17-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards
arm64: dts: rockchip: Add missing secondary compatible for PX30 DSI
arm64: dts: rockchip: Add spi1 pins on Quartz64 A
arm64: dts: rockchip: Add spi nodes on rk356x
arm64: dts: rockchip: Change pwm pinctrl-name to "default" on rk356x
arm64: dts: rockchip: Enable HDD power on helios64
arm64: dts: rockchip: add variables for pcie completion to helios64
arm64: dts: rockchip: define usb hub and 2.5GbE nic on helios64
arm64: dts: rockchip: add interrupt and headphone-detection for Rock Pi4's audio codec
Link: https://lore.kernel.org/r/3637342.7akbv5NDAT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Separate DTs for all t8103 platforms
- Add i2c and cd321x nodes
- Bindings for apple,wdt
- PMGR bindings and DT updates to instantiate it
- WiFi MAC address DT handling
This also includes the MAINTAINERS change for the PMGR driver itself, to
avoid merge issues; the driver will be sent in a different pull.
Manual fixups: Added i2c power domain references to the PMGR DT commit,
since a prior commit added the i2c nodes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSU7I7lUkZru3Mt15+lhN6SrnTN2AUCYa7mWAAKCRClhN6SrnTN
2OcWAP0SeheFWsBVf4H2ePIrHQ87NzCYi9Nb35SSSgBFVRsGXgEAu+H8kTbUMVVh
kPJyeAwtuksqf2W5t45ziIWz+W4k5wI=
=Wxou
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QggY
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-dt-5.17' of https://github.com/AsahiLinux/linux into arm/dt
Apple SoC DT updates for 5.17:
- Separate DTs for all t8103 platforms
- Add i2c and cd321x nodes
- Bindings for apple,wdt
- PMGR bindings and DT updates to instantiate it
- WiFi MAC address DT handling
This also includes the MAINTAINERS change for the PMGR driver itself, to
avoid merge issues; the driver will be sent in a different pull.
Manual fixups: Added i2c power domain references to the PMGR DT commit,
since a prior commit added the i2c nodes.
* tag 'asahi-soc-dt-5.17' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: t8103: Expose PCI node for the WiFi MAC address
arm64: dts: apple: t8103: Add UART2
arm64: dts: apple: t8103: Add PMGR nodes
dt-bindings: arm: apple: Add apple,pmgr binding
dt-bindings: power: Add apple,pmgr-pwrstate binding
MAINTAINERS: Add PMGR power state files to ARM/APPLE MACHINE
dt-bindings: watchdog: Add Apple Watchdog
dt-bindings: interrupt-controller: apple,aic: Add power-domains property
dt-bindings: pinctrl: apple,pinctrl: Add power-domains property
dt-bindings: iommu: apple,dart: Add power-domains property
dt-bindings: i2c: apple,i2c: Add power-domains property
arm64: dts: apple: t8103: Add cd321x nodes
arm64: dts: apple: t8103: Add i2c nodes
arm64: dts: apple: Add missing M1 (t8103) devices
dt-bindings: arm: apple: Add iMac (24-inch 2021) to Apple bindings
arm64: dts: apple: add #interrupt-cells property to pinctrl nodes
dt-bindings: i2c: apple,i2c: allow multiple compatibles
arm64: dts: apple: change ethernet0 device type to ethernet
Link: https://lore.kernel.org/r/e18b476c-7b1f-de73-53a2-0e21fb5cd283@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Steven Maddox reported in the OpenWrt bugzilla, that his
RaidSonic IB-NAS4220-B was no longer booting with the new
OpenWrt 21.02 (uses linux 5.10's device-tree). However, it was
working with the previous OpenWrt 19.07 series (uses 4.14).
|[ 5.548038] No RedBoot partition table detected in 30000000.flash
|[ 5.618553] Searching for RedBoot partition table in 30000000.flash at offset 0x0
|[ 5.739093] No RedBoot partition table detected in 30000000.flash
|...
|[ 7.039504] Waiting for root device /dev/mtdblock3...
The provided bootlog shows that the RedBoot partition parser was
looking for the partition table "at offset 0x0". Which is strange
since the comment in the device-tree says it should be at 0xfe0000.
Further digging on the internet led to a review site that took
some useful PCB pictures of their review unit back in February 2009.
Their picture shows a Spansion S29GL128N11TFI01 flash chip.
>From Spansion's Datasheet:
"S29GL128N: One hundred twenty-eight 64 Kword (128 Kbyte) sectors"
Steven also provided a "cat /sys/class/mtd/mtd0/erasesize" from his
unit: "131072".
With the 128 KiB Sector/Erasesize in mind. This patch changes the
fis-index-block property to (0xfe0000 / 0x20000) = 0x7f.
Fixes: b5a923f8c7 ("ARM: dts: gemini: Switch to redboot partition parsing")
Reported-by: Steven Maddox <s.maddox@lantizia.me.uk>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Steven Maddox <s.maddox@lantizia.me.uk>
Link: https://lore.kernel.org/r/20211206004334.4169408-1-linus.walleij@linaro.org'
Bugzilla: https://bugs.openwrt.org/index.php?do=details&task_id=4137
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SPEAr320s SOC is a SPEAr320 SOC variant.
Mostly identical to the SPEAr320 SOC variant, it has a
new interrupt routing for PL_PGIOs.
Add spear320s.dtsi to handle SPEAr320s SOC
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20211202095255.165797-7-herve.codina@bootlin.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Resources used by plgpio and pinmux are conflicting on SPEAr310
and SPEAr320.
Use the newly introduced regmap property in plgpio node to use
pinmux resources from plgpio and so avoid the conflict.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20211202095255.165797-5-herve.codina@bootlin.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Naming clocks is a good practice. The atmel-quadspi driver supports
an unnamed clock for the peripheral clock in order to be backward
compatible with old DTs, but it is recommended to name the clocks
on new DTs. The driver's bindings file requires the clock-names
property, so name the clock.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211209102542.254153-1-tudor.ambarus@microchip.com
This adds a device tree for the Gateway 7001 AP, based on
Intel IXP422.
Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch fixes the Bluetooth on ROCK Pi 4 boards.
ROCK Pi 4 boards has BCM4345C5 and now it is supported
on Mainline Linux, brcm,bcm43438-bt still working but
observed the BT Audio issues with latest test.
So, use the BCM4345C5 compatible and its associated
properties like clock-names as lpo and max-speed.
Attach vbat and vddio supply rails as well.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20211112142359.320798-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add second DSI compatible to comply with DT schema validation
comming in the second patch.
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20211211233818.88482-1-david@ixit.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the watchdog node which also enables reboot support on the t8103.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
This new SoC uses the same pinctrl hardware, so just add a new per-SoC
compatible.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This new SoC is compatible with the existing driver, but the block
supports 4 downstream ports, so we need to adjust the binding to
allow that.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This block is compatible with t8103, so just add the new per-SoC
compatible under apple,i2c.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This is required for DCP to boot successfully; it seems if power gating
is allowed, they do not wake up properly.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
A few devices (DCP/DCPEXT) need to have the minimum power state for
auto-PM configured. Add a property that allows the DT to specify this
value.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
The Quartz64 Model A has the SPI pins broken out on its pin
header. The actual pins being used though are not the m0
variant, but the m1 variant, which also lacks the cs1 pin.
This commit overrides pinctrl-0 accordingly for this board.
spi1 is intentionally left disabled, as anyone wishing to add
SPI devices needs to edit the dts anyway, and the pins are more
useful as GPIOs for the rest of the users.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211127141910.12649-4-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds the four spi nodes (spi0, spi1, spi2, spi3) to the
rk356x dtsi. These are from the downstream device tree, though
I have double-checked that their interrupts and DMA numbers are
correct. I have also tested spi1 with an SPI device.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211127141910.12649-3-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The old "ak" vendor prefix that was never officially accepted was still
being used in some device trees. Convert to the correct vendor prefix
(i.e. "asahi-kasei").
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The TI wlcore DT bindings specify using a single compatible value for
each variant, and the Linux kernel driver matches against the first
compatible value since commit 078b30da3f ("wlcore: add wl1285
compatible") in v4.13.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ADC0 and ADC1 pins are available on external connector J22.
Enable ADC1 which was missing.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This hardware module is close to the am33xx ADC module but instead of
featuring a touchscreen it has a magnetic reader capability.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Back in 2014 a property got misspelled "ti,coordiante-readouts" instead
of "ti,coordinate-readouts".
The year after it got fixed but both are still supported, although this
is not a reason to continue using this old deprecated property.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
On the am335x-icev2 board [1], AM3359 PMIC_PWR_EN (ZCZ ball C6) is
connected to PWRHOLD (pin 1) on the TPS65910A3 PMIC. The addition of
system-power-controller to the rtc node will enable the capability of
the RTC driver to poweroff the board.
Based on commit 15c7be47fb7c ("ARM: dts: am335x: Add rtc node as
system-power-controller") by Keerthy in ti-linux-5.4.y branch [2].
[1] https://www.ti.com/tool/TMDSICE3359
[2] git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Link: https://lore.kernel.org/linux-omap/20211012191311.879838-1-dfustini@baylibre.com/
Suggested-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Move the rtc node system-power-controller property from
am335x-boneblack-common.dtsi to am335x-bone-common.dtsi.
am335x-boneblack-common.dtsi is included by am335x-boneblack.dts,
am335x-boneblack-wireless.dts, am335x-sancloud-bbe.dts and
am335x-sancloud-bbe-lite.dts. All of these dts files also include
am335x-bone-common.dtsi and thus will retain the rtc node
system-power-controller property.
am335x-bone-common.dtsi is also included by am335x-bone.dts [1],
am335x-bonegreen.dts [2] and am335x-bonegreen-wireless.dts [3]. These
boards will now have the rtc node system-power-controller property too.
This is valid as they also have PMIC_POWR_EN (ZCZ C6) connected to
PWR_EN on the TPS65217B PMIC.
Based on commit 15c7be47fb7c ("ARM: dts: am335x: Add rtc node as
system-power-controller") by Keerthy in ti-linux-5.4.y branch [4].
[1] https://beagleboard.org/static/beaglebone/BEAGLEBONE_SCHEM_A3.pdf
[2] https://github.com/SeeedDocument/BeagleBone_Green/blob/master/resources/BEAGLEBONE_GREEN_V1.pdf
[3] https://github.com/SeeedDocument/BeagleBone_Green_Wireless/blob/master/resources/BeagleBone_Green%20Wireless_V1.0_SCH_20160314.pdf
[4] git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git
Cc: Jason Kridner <jkridner@beagleboard.org>
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Link: https://lore.kernel.org/linux-omap/20211012191311.879838-1-dfustini@baylibre.com/
Suggested-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Vendor prefix shouldn't start with capital letter. The Elpida Memory
compatible was never used in practice, hence just correct the compatible.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
I/O voltage for eMMC is always 3.3V because PA11__SDMMC0_VDDSEL is
tied with 10K resistor to GND. U13 switch S1 is always selected as
voltage rail of 3.3V for VCCQ power pin from MPU controller and eMMC flash.
Removing PA11 from pinctrl because it remains unused.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211026132034.678655-1-eugen.hristev@microchip.com
The alternate function of PD20 is 4 as per the datasheet of
sama7g5 and not 5 as defined earlier.
Signed-off-by: Hari Prasath <Hari.PrasathGE@microchip.com>
Fixes: 7540629e2f ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211208063553.19807-1-Hari.PrasathGE@microchip.com
The driver doesn't support these, they shouldn't be in the SoC include
anyway, and we're now configuring this in the bootloader instead. This
also solves the j274 1G/10G Ethernet variant discrepancy, since that
will now be configured properly based on the dynamic ADT property.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Expose the PCI node corresponding to the WiFi device and give it
a 'local-mac-address' property. The bootloader will update it
(m1n1 already has the required feature).
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This UART is connected to the debug port of the WLAN module. It is
mostly useless, but makes for a good test case for runtime-pm without
having to unbind the console from the main system UART.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This adds the two PMGR nodes and all known power state subnodes. Since
there are a large number of them, let's put them in a separate file to
include.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
The PMGR block in Apple Silicon SoCs is responsible for SoC power
management. There are two PMGRs in T8103, with different register
layouts but compatible registers. In order to support this as well
as future SoC generations with backwards-compatible registers, we
declare these blocks as syscons and bind to individual registers
in child nodes. Each register controls one SoC device.
The respective apple compatibles are defined in case device-specific
quirks are necessary in the future, but currently these nodes are
expected to be bound by the generic syscon driver.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
