ublk_ctrl_start_recovery() only uses its const struct ublksrv_ctrl_cmd *
header argument to log the dev_id. But this value is already available
in struct ublk_device's ub_number field. So log ub_number instead and
drop the unused header argument.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct ublksrv_ctrl_cmd is part of the io_uring_sqe, which may lie in
userspace-mapped memory. It's racy to access its fields with normal
loads, as userspace may write to them concurrently. Use READ_ONCE() to
copy the ublksrv_ctrl_cmd from the io_uring_sqe to the stack. Use the
local copy in place of the one in the io_uring_sqe.
Fixes: 87213b0d84 ("ublk: allow non-blocking ctrl cmds in IO_URING_F_NONBLOCK issue")
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before
IO_URING_F_SQE128 flag check. This could cause out of boundary memory
access.
Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return
-EINVAL immediately if the flag is not set.
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce the helper function bdev_rot() to test if a block device is a
rotational one. The existing function bdev_nonrot() which tests for the
opposite condition is redefined using this new helper.
This avoids the double negation (operator and name) that appears when
testing if a block device is a rotational device, thus making the code a
little easier to read.
Call sites of bdev_nonrot() in the block layer are updated to use this
new helper. Remaining users in other subsystems are left unchanged for
now.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 1ceeedb597 ("ublk: optimize UBLK_IO_UNREGISTER_IO_BUF on daemon
task") optimized ublk request buffer unregistration to use a non-atomic
reference count decrement when performed on the ublk_io's daemon task.
The optimization applied to auto buffer unregistration, which happens as
part of handling UBLK_IO_COMMIT_AND_FETCH_REQ on the daemon task.
However, commit b749965edd ("ublk: remove ublk_commit_and_fetch()")
reordered the ublk_sub_req_ref() for the completed request before the
io_buffer_unregister_bvec() call. As a result, task_registered_buffers
is already 0 when io_buffer_unregister_bvec() calls ublk_io_release()
and the non-atomic refcount optimization doesn't apply.
Move the io_buffer_unregister_bvec() call back to before
ublk_need_complete_req() to restore the reference counting optimization.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: b749965edd ("ublk: remove ublk_commit_and_fetch()")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To check if a request queue is for a rotational device, a double
negation is needed with the pattern "!blk_queue_nonrot(q)". Simplify
this with the introduction of the helper blk_queue_rot() which tests
if a requests queue limit has the BLK_FEAT_ROTATIONAL feature set.
All call sites of blk_queue_nonrot() are modified to use blk_queue_rot()
and blk_queue_nonrot() definition removed.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unwrap the definition of BLK_FEAT_ATOMIC_WRITES and
renumber this feature to be sequential with BLK_FEAT_SKIP_TAGSET_QUIESCE.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add comprehensive documentation for ublk's split reference counting
model (io->ref + io->task_registered_buffers) above ublk_init_req_ref()
given this model isn't very straightforward.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace snprintf("%s", ...) with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
During device unmapping (triggered by module unload or explicit unmap),
a refcount underflow occurs causing a use-after-free warning:
[14747.574913] ------------[ cut here ]------------
[14747.574916] refcount_t: underflow; use-after-free.
[14747.574917] WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x55/0x90, CPU#9: kworker/9:1/378
[14747.574924] Modules linked in: rnbd_client(-) rtrs_client rnbd_server rtrs_server rtrs_core ...
[14747.574998] CPU: 9 UID: 0 PID: 378 Comm: kworker/9:1 Tainted: G O N 6.19.0-rc3lblk-fnext+ #42 PREEMPT(voluntary)
[14747.575005] Workqueue: rnbd_clt_wq unmap_device_work [rnbd_client]
[14747.575010] RIP: 0010:refcount_warn_saturate+0x55/0x90
[14747.575037] Call Trace:
[14747.575038] <TASK>
[14747.575038] rnbd_clt_unmap_device+0x170/0x1d0 [rnbd_client]
[14747.575044] process_one_work+0x211/0x600
[14747.575052] worker_thread+0x184/0x330
[14747.575055] ? __pfx_worker_thread+0x10/0x10
[14747.575058] kthread+0x10d/0x250
[14747.575062] ? __pfx_kthread+0x10/0x10
[14747.575066] ret_from_fork+0x319/0x390
[14747.575069] ? __pfx_kthread+0x10/0x10
[14747.575072] ret_from_fork_asm+0x1a/0x30
[14747.575083] </TASK>
[14747.575096] ---[ end trace 0000000000000000 ]---
Befor this patch :-
The bug is a double kobject_put() on dev->kobj during device cleanup.
Kobject Lifecycle:
kobject_init_and_add() sets kobj.kref = 1 (initialization)
kobject_put() sets kobj.kref = 0 (should be called once)
* Before this patch:
rnbd_clt_unmap_device()
rnbd_destroy_sysfs()
kobject_del(&dev->kobj) [remove from sysfs]
kobject_put(&dev->kobj) PUT #1 (WRONG!)
kref: 1 to 0
rnbd_dev_release()
kfree(dev) [DEVICE FREED!]
rnbd_destroy_gen_disk() [use-after-free!]
rnbd_clt_put_dev()
refcount_dec_and_test(&dev->refcount)
kobject_put(&dev->kobj) PUT #2 (UNDERFLOW!)
kref: 0 to -1 [WARNING!]
The first kobject_put() in rnbd_destroy_sysfs() prematurely frees the
device via rnbd_dev_release(), then the second kobject_put() in
rnbd_clt_put_dev() causes refcount underflow.
* After this patch :-
Remove kobject_put() from rnbd_destroy_sysfs(). This function should
only remove sysfs visibility (kobject_del), not manage object lifetime.
Call Graph (FIXED):
rnbd_clt_unmap_device()
rnbd_destroy_sysfs()
kobject_del(&dev->kobj) [remove from sysfs only]
[kref unchanged: 1]
rnbd_destroy_gen_disk() [device still valid]
rnbd_clt_put_dev()
refcount_dec_and_test(&dev->refcount)
kobject_put(&dev->kobj) ONLY PUT (CORRECT!)
kref: 1 to 0 [BALANCED]
rnbd_dev_release()
kfree(dev) [CLEAN DESTRUCTION]
This follows the kernel pattern where sysfs removal (kobject_del) is
separate from object destruction (kobject_put).
Fixes: 581cf833ca ("block: rnbd: add .release to rnbd_dev_ktype")
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These imports are already in scope by importing `kernel::prelude::*` and
does not need to be imported separately.
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull MD updates from Yu:
"Bug Fixes:
- Fix raid5_run() to return error when log_init() fails (Yu Kuai)
- Fix IO hang with degraded array with llbitmap (Yu Kuai)
- Fix percpu_ref not resurrected on suspend timeout in llbitmap
(Yu Kuai)
- Fix GPF in write_page caused by resize race (Jack Wang)
- Fix NULL pointer dereference in process_metadata_update
(Jiasheng Jiang)
- Fix hang when stopping arrays with metadata through dm-raid
(Heinz Mauelshagen)
- Fix any_working flag handling in raid10_sync_request (Li Nan)
Cleanups & Refactoring:
- Refactor sync/recovery code path, improve error handling for
badblocks, and remove unused recovery_disabled field (Li Nan)
- Consolidate mddev boolean fields into mddev_flags (Yu Kuai)
Improvements:
- Use mempool to allocate stripe_request_ctx and make sure max_sectors
is not less than io_opt in raid5 (Yu Kuai)"
* tag 'md-7.0-20260127' of git://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux: (23 commits)
md raid: fix hang when stopping arrays with metadata through dm-raid
md-cluster: fix NULL pointer dereference in process_metadata_update
md/bitmap: fix GPF in write_page caused by resize race
md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout
md/raid5: fix IO hang with degraded array with llbitmap
md: remove recovery_disabled
md/raid10: cleanup skip handling in raid10_sync_request
md/raid10: fix any_working flag handling in raid10_sync_request
md: move finish_reshape to md_finish_sync()
md: factor out sync completion update into helper
md: remove MD_RECOVERY_ERROR handling and simplify resync_offset update
md: update curr_resync_completed even when MD_RECOVERY_INTR is set
md: mark rdev Faulty when badblocks setting fails
md: break remaining operations on badblocks set failure in narrow_write_error
md/raid1,raid10: support narrow_write_error when badblocks is disabled
md: factor error handling out of md_done_sync into helper
md/raid1: simplify uptodate handling in end_sync_write
md/raid5: make sure max_sectors is not less than io_opt
md/raid5: use mempool to allocate stripe_request_ctx
md: merge mddev serialize_policy into mddev_flags
...
There are no more callers of this function after commit f6b2d8b134
("btrfs: track the next file offset in struct btrfs_bio_ctrl"), so
remove the function.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When using device-mapper's dm-raid target, stopping a RAID array can cause
the system to hang under specific conditions.
This occurs when:
- A dm-raid managed device tree is suspended from top to bottom
(the top-level RAID device is suspended first, followed by its
underlying metadata and data devices)
- The top-level RAID device is then removed
Removing the top-level device triggers a hang in the following sequence:
the dm-raid destructor calls md_stop(), which tries to flush the
write-intent bitmap by writing to the metadata sub-devices. However, these
devices are already suspended, making them unable to complete the write-intent
operations and causing an indefinite block.
Fix:
- Prevent bitmap flushing when md_stop() is called from dm-raid
destructor context
and avoid a quiescing/unquescing cycle which could also cause I/O
- Still allow write-intent bitmap flushing when called from dm-raid
suspend context
This ensures that RAID array teardown can complete successfully even when the
underlying devices are in a suspended state.
This second patch uses md_is_rdwr() to distinguish between suspend and
destructor paths as elaborated on above.
Link: https://lore.kernel.org/linux-raid/CAM23VxqYrwkhKEBeQrZeZwQudbiNey2_8B_SEOLqug=pXxaFrA@mail.gmail.com
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
The function process_metadata_update() blindly dereferences the 'thread'
pointer (acquired via rcu_dereference_protected) within the wait_event()
macro.
While the code comment states "daemon thread must exist", there is a valid
race condition window during the MD array startup sequence (md_run):
1. bitmap_load() is called, which invokes md_cluster_ops->join().
2. join() starts the "cluster_recv" thread (recv_daemon).
3. At this point, recv_daemon is active and processing messages.
4. However, mddev->thread (the main MD thread) is not initialized until
later in md_run().
If a METADATA_UPDATED message is received from a remote node during this
specific window, process_metadata_update() will be called while
mddev->thread is still NULL, leading to a kernel panic.
To fix this, we must validate the 'thread' pointer. If it is NULL, we
release the held lock (no_new_dev_lockres) and return early, safely
ignoring the update request as the array is not yet fully ready to
process it.
Link: https://lore.kernel.org/linux-raid/20260117145903.28921-1-jiashengjiangcool@gmail.com
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
A General Protection Fault occurs in write_page() during array resize:
RIP: 0010:write_page+0x22b/0x3c0 [md_mod]
This is a use-after-free race between bitmap_daemon_work() and
__bitmap_resize(). The daemon iterates over `bitmap->storage.filemap`
without locking, while the resize path frees that storage via
md_bitmap_file_unmap(). `quiesce()` does not stop the md thread,
allowing concurrent access to freed pages.
Fix by holding `mddev->bitmap_info.mutex` during the bitmap update.
Link: https://lore.kernel.org/linux-raid/20260120102456.25169-1-jinpu.wang@ionos.com
Closes: https://lore.kernel.org/linux-raid/CAMGffE=Mbfp=7xD_hYxXk1PAaCZNSEAVeQGKGy7YF9f2S4=NEA@mail.gmail.com/T/#u
Cc: stable@vger.kernel.org
Fixes: d60b479d17 ("md/bitmap: add bitmap_resize function to allow bitmap resizing.")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
When llbitmap_suspend_timeout() times out waiting for percpu_ref to
become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref.
The caller (md_llbitmap_daemon_fn) then continues to the next page
without calling llbitmap_resume(), leaving the percpu_ref in a killed
state permanently.
Fix this by resurrecting the percpu_ref before returning the error,
ensuring the page control structure remains usable for subsequent
operations.
Link: https://lore.kernel.org/linux-raid/20260123182623.3718551-3-yukuai@fnnas.com
Fixes: 5ab829f197 ("md/md-llbitmap: introduce new lockless bitmap")
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
When llbitmap bit state is still unwritten, any new write should force
rcw, as bitmap_ops->blocks_synced() is checked in handle_stripe_dirtying().
However, later the same check is missing in need_this_block(), causing
stripe to deadloop during handling because handle_stripe() will decide
to go to handle_stripe_fill(), meanwhile need_this_block() always return
0 and nothing is handled.
Link: https://lore.kernel.org/linux-raid/20260123182623.3718551-2-yukuai@fnnas.com
Fixes: 5ab829f197 ("md/md-llbitmap: introduce new lockless bitmap")
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
'recovery_disabled' logic is complex and confusing, originally intended to
preserve raid in extreme scenarios. It was used in following cases:
- When sync fails and setting badblocks also fails, kick out non-In_sync
rdev and block spare rdev from joining to preserve raid [1]
- When last backup is unavailable, prevent repeated add-remove of spares
triggering recovery [2]
The original issues are now resolved:
- Error handlers in all raid types prevent last rdev from being kicked out
- Disks with failed recovery are marked Faulty and can't re-join
Therefore, remove 'recovery_disabled' as it's no longer needed.
[1] 5389042ffa ("md: change managed of recovery_disabled.")
[2] 4044ba58dd ("md: don't retry recovery of raid1 that fails due to error on source drive.")
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-13-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Skip a sector in raid10_sync_request() when it needs no syncing or no
readable device exists. Current skip handling is unnecessary:
- Use 'skip' label to reissue the next sector instead of return directly
- Complete sync and return 'max_sectors' when multiple sectors are skipped
due to badblocks
The first is error-prone. For example, commit bc49694a9e ("md: pass in
max_sectors for pers->sync_request()") removed redundant max_sector
assignments. Since skip modifies max_sectors, `goto skip` leaves
max_sectors equal to sector_nr after the jump, which is incorrect.
The second causes sync to complete erroneously when no actual sync occurs.
For recovery, recording badblocks and continue syncing subsequent sectors
is more suitable. For resync, just skip bad sectors and syncing subsequent
sectors.
Clean up complex and unnecessary skip code. Return immediately when a
sector should be skipped. Reduce code paths and lower regression risk.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-12-linan666@huaweicloud.com
Fixes: bc49694a9e ("md: pass in max_sectors for pers->sync_request()")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
In raid10_sync_request(), 'any_working' indicates if any IO will
be submitted. When there's only one In_sync disk with badblocks,
'any_working' might be set to 1 but no IO is submitted. Fix it by
setting 'any_working' after badblock checks.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-11-linan666@huaweicloud.com
Fixes: e875ecea26 ("md/raid10 record bad blocks as needed during recovery.")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
finish_reshape implementations of raid10 and raid5 only update mddev
and rdev configurations. Move these operations to md_finish_sync() as
it is more appropriate.
No functional changes.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-10-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Repeatedly reading 'mddev->recovery' flags in md_do_sync() may introduce
potential risk if this flag is modified during sync, leading to incorrect
offset updates. Therefore, replace direct 'mddev->recovery' checks with
'action'.
Move sync completion update logic into helper md_finish_sync(), which
improves readability and maintainability.
The reshape completion update remains safe as it only updated after
successful reshape when MD_RECOVERY_INTR is not set and 'curr_resync'
equals 'max_sectors'.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-9-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Following previous patch "md: update curr_resync_completed even when
MD_RECOVERY_INTR is set", 'curr_resync_completed' always equals
'curr_resync' for resync, so MD_RECOVERY_ERROR can be removed.
Also, simplify resync_offset update logic.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-8-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
An error sync IO may be done and sub 'recovery_active' while its
error handling work is pending. This work sets 'recovery_disabled'
and MD_RECOVERY_INTR, then later removes the bad disk without Faulty
flag. If 'curr_resync_completed' is updated before the disk is removed,
it could lead to reading from sync-failed regions.
With the previous patch, error IO will set badblocks or mark rdev as
Faulty, sync-failed regions are no longer readable. After waiting for
'recovery_active' to reach 0 (in the previous line), all sync IO has
*completed*, regardless of whether MD_RECOVERY_INTR is set. Thus, the
MD_RECOVERY_INTR check can be removed.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-7-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Currently when sync read fails and badblocks set fails (exceeding
512 limit), rdev isn't immediately marked Faulty. Instead
'recovery_disabled' is set and non-In_sync rdevs are removed later.
This preserves array availability if bad regions aren't read, but bad
sectors might be read by users before rdev removal. This occurs due
to incorrect resync/recovery_offset updates that include these bad
sectors.
When badblocks exceed 512, keeping the disk provides little benefit
while adding complexity. Prompt disk replacement is more important.
Therefore when badblocks set fails, directly call md_error to mark rdev
Faulty immediately, preventing potential data access issues.
After this change, cleanup of offset update logic and 'recovery_disabled'
handling will follow.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-6-linan666@huaweicloud.com
Fixes: 5e5702898e ("md/raid10: Handle read errors during recovery better.")
Fixes: 3a9f28a511 ("md/raid1: improve handling of read failure during recovery.")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Mark device faulty and exit at once when setting badblocks fails in
narrow_write_error(). No need to continue processing remaining sections.
With this change, narrow_write_error() no longer needs to return a value,
so adjust its return type to void.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-5-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
When badblocks.shift < 0 (badblocks disabled), narrow_write_error()
return false, preventing write error handling. Since narrow_write_error()
only splits IO into smaller sizes and re-submits, it can work with
badblocks disabled.
Adjust to use the logical block size for block_sectors when badblocks is
disabled, allowing narrow_write_error() to function in this case.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-4-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
The 'ok' parameter in md_done_sync() is redundant for most callers that
always pass 'true'. Factor error handling logic into a separate helper
function md_sync_error() to eliminate unnecessary parameter passing and
improve code clarity.
No functional changes introduced.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-3-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
In end_sync_write, r1bio state is always set to either R1BIO_WriteError
or R1BIO_MadeGood. Consequently, put_sync_write_buf() never takes the
'else' branch that calls md_done_sync(), making the uptodate parameter
have no practical effect.
Pass 1 to put_sync_write_buf(). A more complete cleanup will be done in
a follow-up patch.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-2-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Otherwise, even if user issue IO by io_opt, such IO will be split
by max_sectors before they are submitted to raid5. For consequence,
full stripe IO is impossible.
BTW, dm-raid5 is not affected and still have such problem.
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-7-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
On the one hand, stripe_request_ctx is 72 bytes, and it's a bit huge for
a stack variable.
On the other hand, the bitmap sectors_to_do is a fixed size, result in
max_hw_sector_kb of raid5 array is at most 256 * 4k = 1Mb, and this will
make full stripe IO impossible for the array that chunk_size * data_disks
is bigger. Allocate ctx during runtime will make it possible to get rid
of this limit.
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-6-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Since commit f63f17350e ("md/raid5: use the atomic queue limit
update APIs"), the abort path in raid5_run() returns 'ret' instead of
-EIO. However, if log_init() fails, 'ret' is still 0 from the previous
successful call, causing raid5_run() to return success despite the
failure.
Fix this by capturing the return value from log_init().
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-2-yukuai@fnnas.com
Fixes: f63f17350e ("md/raid5: use the atomic queue limit update APIs")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202601130531.LGfcZsa4-lkp@intel.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
A new utility metadata_size was added in
commit 261b67f4e3 ("selftests: ublk: add utility to get block device metadata size")
but it was not added to .gitignore. Fix that by adding it there.
While at it sort all entries alphabetically and add a SPDX license header.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 261b67f4e3 ("selftests: ublk: add utility to get block device metadata size")
Signed-off-by: Alexander Atanasov <alex@zazolabs.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rename the auto buffer registration functions for clarity:
- __ublk_do_auto_buf_reg() -> ublk_auto_buf_register()
- ublk_prep_auto_buf_reg_io() -> ublk_auto_buf_io_setup()
- ublk_do_auto_buf_reg() -> ublk_auto_buf_dispatch()
Add comments documenting the locking requirements for each function.
No functional change.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Two issues with ubq->canceling flag handling:
1) In ublk_queue_reset_io_flags(), ubq->canceling is set outside
cancel_lock, violating the locking requirement. Move it inside
the spinlock-protected section.
2) In ublk_batch_unprep_io(), when rolling back after a batch prep
failure, if the queue became ready during prep (which cleared
canceling), the flag is not restored when the queue becomes
not-ready again. This allows new requests to be queued to
uninitialized IO slots.
Fix by restoring ubq->canceling = true under cancel_lock when the
queue transitions from ready to not-ready during rollback.
Reported-by: Jens Axboe <axboe@kernel.dk>
Fixes: 3f38507855 ("ublk: fix batch I/O recovery -ENODEV error")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_batch_prep_io() calls __ublk_fetch() while holding io->lock
spinlock. When the last IO makes the device ready, ublk_mark_io_ready()
tries to acquire ub->cancel_mutex which can sleep, causing a
sleeping-while-atomic bug.
Fix by moving ublk_mark_io_ready() out of __ublk_fetch() and into the
callers (ublk_fetch and ublk_batch_prep_io) after the spinlock is
released.
Reported-by: Jens Axboe <axboe@kernel.dk>
Fixes: b256795b36 ("ublk: handle UBLK_U_IO_PREP_IO_CMDS")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable flexible thread-to-queue mapping in batch I/O mode to support
arbitrary combinations of threads and queues, improving resource
utilization and scalability.
Key improvements:
- Support N:M thread-to-queue mapping (previously limited to 1:1)
- Dynamic buffer allocation based on actual queue assignment per thread
- Thread-safe queue preparation with spinlock protection
- Intelligent buffer index calculation for multi-queue scenarios
- Enhanced validation for thread/queue combination constraints
Implementation details:
- Add q_thread_map matrix to track queue-to-thread assignments
- Dynamic allocation of commit and fetch buffers per thread
- Round-robin queue assignment algorithm for load balancing
- Per-queue spinlock to prevent race conditions during prep
- Updated buffer index calculation using queue position within thread
This enables efficient configurations like:
- Any other N:M combinations for optimal resource matching
Testing:
- Added test_batch_02.sh: 4 threads vs 1 queue
- Added test_batch_03.sh: 1 thread vs 4 queues
- Validates correctness across different mapping scenarios
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add --batch/-b for enabling F_BATCH_IO.
Add batch_01 for covering its basic function.
Add stress_08 and stress_09 for covering stress test.
Add recovery test for F_BATCH_IO in generic_04 and generic_05.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
More tests need to be covered in existing generic tests, and default
45sec isn't enough, and timeout is often triggered, increase timeout
by adding setting file.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for UBLK_U_IO_FETCH_IO_CMDS to enable efficient batch
fetching of I/O commands using multishot io_uring operations.
Key improvements:
- Implement multishot UBLK_U_IO_FETCH_IO_CMDS for continuous command fetching
- Add fetch buffer management with page-aligned, mlocked buffers
- Process fetched I/O command tags from kernel-provided buffers
- Integrate fetch operations with existing batch I/O infrastructure
- Significantly reduce uring_cmd issuing overhead through batching
The implementation uses two fetch buffers per thread with automatic
requeuing to maintain continuous I/O command flow. Each fetch operation
retrieves multiple command tags in a single syscall, dramatically
improving performance compared to individual command fetching.
Technical details:
- Fetch buffers are page-aligned and mlocked for optimal performance
- Uses IORING_URING_CMD_MULTISHOT for continuous operation
- Automatic buffer management and requeuing on completion
- Enhanced CQE handling for fetch command completions
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement UBLK_U_IO_COMMIT_IO_CMDS to enable efficient batched
completion of I/O operations in the batch I/O framework.
This completes the batch I/O infrastructure by adding the commit
phase that notifies the kernel about completed I/O operations:
Key features:
- Batch multiple I/O completions into single UBLK_U_IO_COMMIT_IO_CMDS
- Dynamic commit buffer allocation and management per thread
- Automatic commit buffer preparation before processing events
- Commit buffer submission after processing completed I/Os
- Integration with existing completion workflows
Implementation details:
- ublk_batch_prep_commit() allocates and initializes commit buffers
- ublk_batch_complete_io() adds completed I/Os to current batch
- ublk_batch_commit_io_cmds() submits batched completions to kernel
- Modified ublk_process_io() to handle batch commit lifecycle
- Enhanced ublk_complete_io() to route to batch or legacy completion
The commit buffer stores completion information (tag, result, buffer
details) for multiple I/Os, then submits them all at once, significantly
reducing syscall overhead compared to individual I/O completions.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement support for UBLK_U_IO_PREP_IO_CMDS in the batch I/O framework:
- Add batch command initialization and setup functions
- Implement prep command queueing with proper buffer management
- Add command completion handling for prep and commit commands
- Integrate batch I/O setup into thread initialization
- Update CQE handling to support batch commands
The implementation uses the previously established buffer management
infrastructure to queue UBLK_U_IO_PREP_IO_CMDS commands. Commands are
prepared in the first thread context and use commit buffers for
efficient command batching.
Key changes:
- ublk_batch_queue_prep_io_cmds() prepares I/O command batches
- ublk_batch_compl_cmd() handles batch command completions
- Modified thread setup to use batch operations when enabled
- Enhanced buffer index calculation for batch mode
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the foundational infrastructure for UBLK_F_BATCH_IO buffer
management including:
- Allocator utility functions for small sized per-thread allocation
- Batch buffer allocation and deallocation functions
- Buffer index management for commit buffers
- Thread state management for batch I/O mode
- Buffer size calculation based on device features
This prepares the groundwork for handling batch I/O commands by
establishing the buffer management layer needed for UBLK_U_IO_PREP_IO_CMDS
and UBLK_U_IO_COMMIT_IO_CMDS operations.
The allocator uses CPU sets for efficient per-thread buffer tracking,
and commit buffers are pre-allocated with 2 buffers per thread to handle
overlapping command operations.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since UBLK_F_PER_IO_DAEMON is added, io buffer index may depend on current
thread because the common way is to use per-pthread io_ring_ctx for issuing
ublk uring_cmd.
Add one helper for returning io buffer index, so we can hide the buffer
index implementation details for target code.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace assert() with ublk_assert() since it is often triggered in daemon,
and we may get nothing shown in terminal.
Add ublk_assert(), so we can log something to syslog when assert() is
triggered.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
