[ Upstream commit 0b2761eb12 ]
The P66's device tree includes the reference design dtsi files, which
defines a node and properties for the touchpanel in the common design.
The P66 dts file then overrides all the properties to match its own
design, but as the touchpanel model is different, a different schema
is matched. This other schema uses a different name for the GPIO.
The original submission added the correct GPIO property, but did not
delete the one inherited from the reference design, causing validation
errors.
Explicitly delete the incorrect GPIO property.
Fixes: 2a53aff272 ("ARM: dts: sun5i: Enable touchscreen on Utoo P66")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251225103616.3203473-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7db5fbe508 ]
Trivial change, Analog Devices vendor prefix is "adi", but there is
a valid "ad" vendor prefix of another company, this may explain why
the issue hasn't been discovered by the automatic tests.
A problem of not described compatible value is out of this change scope.
Fixes: c636eeb751 ("arm64: dts: qcom: msm8994-octagon: Add AD7147 and APDS9930 sensors")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251226003923.3341904-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3af51501e2 ]
It seems the USB combo SS1 and SS2 ref clocks have another gate, unlike
the SS0. These gates are part of the TCSR clock controller.
At least on Dell XPS 13 (9345), if the ref clock provided by the TCSR
clock controller for SS1 PHY is disabled on the clk_disable_unused late
initcall, the PHY fails to initialize. It doesn't happen on the SS0 PHY
and the SS2 is not used on this device.
This doesn't seem to be a problem on CRD though. It might be that the
RPMh has a vote for it from some other consumer and does not actually
disable it when ther kernel drops its vote.
Either way, these TCSR provided clocks seem to be the correct ones for
the SS1 and SS2, so use them instead.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251103-dts-qcom-x1e80100-fix-combo-ref-clks-v1-1-f395ec3cb7e8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad33ee060b ]
This regulator is used only for the display, which is enabled by the
bootloader and left on for continuous splash. Mark it as such.
Fixes: 288ef8a426 ("arm64: dts: sdm845: add oneplus6/6t devices")
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-dts-oneplus-regulators-v2-3-3e67cea1e4e7@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9b98b9dad ]
The touchscreen isn't enabled by bootloader and doesn't need to be
enabled at boot, only when the driver probes, thus remove the
regulator-boot-on property.
Fixes: 288ef8a426 ("arm64: dts: sdm845: add oneplus6/6t devices")
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-dts-oneplus-regulators-v2-1-3e67cea1e4e7@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e814796dfc ]
Historically sdm630.dtsi has used 1 byte length for the gpu_speed_bin
cell, although it spans two bytes (offset 5, size 7 bits). It was being
accepted by the kernel because before the commit 7a06ef7510 ("nvmem:
core: fix bit offsets of more than one byte") the kernel didn't have
length check. After this commit nvmem core rejects QFPROM on sdm630 /
sdm660, making GPU and USB unusable on those platforms.
Set the size of the gpu_speed_bin cell to 2 bytes, fixing the parsing
error. While we are at it, update the length to 8 bits as pointed out by
Alexey Minnekhanov.
Fixes: b190fb0106 ("arm64: dts: qcom: sdm630: Add sdm630 dts file")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Link: https://lore.kernel.org/r/20251211-sdm630-fix-gpu-v2-1-92f0e736dba0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e07ebe744 ]
When devm_platform_ioremap_resource() fails, it returns various
error codes. Returning a hardcoded -ENOMEM masks the actual
failure reason.
Use PTR_ERR() to propagate the actual error code returned by
devm_platform_ioremap_resource() instead of -ENOMEM.
Fixes: 75e0a1e301 ("clk: qcom: define probe by index API as common API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251217041338.2432-1-vulab@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53a5c1d98d ]
As per datasheet of the HDMI protection IC the CEC_IC pin has been
configured as open-drain.
Fixes: ddabb3ce3f ("arm64: dts: freescale: add TQMa8MPQL on MBa8MP-RAS314")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8401527abb ]
As per datasheet of the HDMI protection IC the CEC_IC pin has been
configured as open-drain.
Fixes: 418d1d840e ("arm64: dts: freescale: add initial device tree for TQMa8MPQL with i.MX8MP")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be4d4543f7 ]
The FF-A specification allows NOTIFICATION_INFO_GET to return either a
64-bit (FFA_FN64_SUCCESS) or a 32-bit (FFA_SUCCESS) response, depending on
whether the firmware chooses the SMC64 or SMC32 calling convention.
The driver previously detected the response format by checking ret.a0, but
still interpreted the returned ID lists (x3..x17 or w3..w7) as if they always
followed the 64-bit SMC64 layout. In the SMC32 case, the upper 32 bits of
each argument register are undefined by the calling convention, meaning the
driver could read stale or garbage values when parsing notification IDs.
This resulted in incorrectly decoded partition/VCPU IDs whenever the FF-A
firmware used an SMC32 return path.
Fix the issue by:
- Introducing logic to map list indices to the correct u16 offsets,
depending on whether the response width matches the kernel word size
or is a 32-bit response on a 64-bit kernel.
- Ensuring that the packed ID list is parsed using the proper layout,
avoiding reads from undefined upper halves in the SMC32 case.
With this change, NOTIFICATION_INFO_GET now correctly interprets ID list
entries regardless of the response width, aligning the driver with the FF-A
specification.
Fixes: 3522be48d8 ("firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface")
Reported-by: Sourav Mohapatra <sourav.mohapatra@arm.com>
Message-Id: <20251218142001.2457111-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72f1268361 ]
The snprintf() can't really overflow because we're writing a max of 42
bytes to a PAGE_SIZE buffer. But my static checker complains because
the limit calculation doesn't take the first 11 space characters that
we wrote into the buffer into consideration. Fix this for the sake of
correctness even though it doesn't affect runtime.
Also delete an earlier "space -= n;" which was not used.
Fixes: 68d086f89b ("i5400_edac: improve debug messages to better represent the filled memory")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/ccd06b91748e7ed8e33eeb2ff1e7b98700879304.1765290801.git.dan.carpenter@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b5c7e83ac ]
The snprintf() can't really overflow because we're writing a max of 42
bytes to a PAGE_SIZE buffer. But the limit calculation doesn't take
the first 11 bytes that we wrote into consideration so the limit is
not correct. Just fix it for correctness even though it doesn't
affect runtime.
Fixes: 64e1fdaf55 ("i5000_edac: Fix the logic that retrieves memory information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/07cd652c51e77aad5a8350e1a7cd9407e5bbe373.1765290801.git.dan.carpenter@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fe01a7955 ]
Fail the driver probe if the region can't be mapped
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Fixes: 20bb6c9de1 ("soc: qcom: smem: map only partitions used by local HOST")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251209074610.3751781-1-jorge.ramirez@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5669645c05 ]
persistent_ram_save_old() can be called multiple times for the same
persistent_ram_zone (e.g., via ramoops_pstore_read -> ramoops_get_next_prz
for PSTORE_TYPE_DMESG records).
Currently, the function only allocates prz->old_log when it is NULL,
but it unconditionally updates prz->old_log_size to the current buffer
size and then performs memcpy_fromio() using this new size. If the
buffer size has grown since the first allocation (which can happen
across different kernel boot cycles), this leads to:
1. A heap buffer overflow (OOB write) in the memcpy_fromio() calls
2. A subsequent OOB read when ramoops_pstore_read() accesses the buffer
using the incorrect (larger) old_log_size
The KASAN splat would look similar to:
BUG: KASAN: slab-out-of-bounds in ramoops_pstore_read+0x...
Read of size N at addr ... by task ...
The conditions are likely extremely hard to hit:
0. Crash with a ramoops write of less-than-record-max-size bytes.
1. Reboot: ramoops registers, pstore_get_records(0) reads old crash,
allocates old_log with size X
2. Crash handler registered, timer started (if pstore_update_ms >= 0)
3. Oops happens (non-fatal, system continues)
4. pstore_dump() writes oops via ramoops_pstore_write() size Y (>X)
5. pstore_new_entry = 1, pstore_timer_kick() called
6. System continues running (not a panic oops)
7. Timer fires after pstore_update_ms milliseconds
8. pstore_timefunc() → schedule_work() → pstore_dowork() → pstore_get_records(1)
9. ramoops_get_next_prz() → persistent_ram_save_old()
10. buffer_size() returns Y, but old_log is X bytes
11. Y > X: memcpy_fromio() overflows heap
Requirements:
- a prior crash record exists that did not fill the record size
(almost impossible since the crash handler writes as much as it
can possibly fit into the record, capped by max record size and
the kmsg buffer almost always exceeds the max record size)
- pstore_update_ms >= 0 (disabled by default)
- Non-fatal oops (system survives)
Free and reallocate the buffer when the new size differs from the
previously allocated size. This ensures old_log always has sufficient
space for the data being copied.
Fixes: 201e4aca5a ("pstore/ram: Should update old dmesg buffer before reading")
Signed-off-by: Sai Ritvik Tanksalkar <stanksal@purdue.edu>
Link: https://patch.msgid.link/20260201132240.2948732-1-stanksal@purdue.edu
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc2f39d6ac ]
Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread
exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex
lock, a concurrent hwrng_unregister() may call kthread_stop() again on
the same task.
Additionally, if hwrng_unregister() is called immediately after
hwrng_register(), the stopped thread may have never been executed. Thus,
hwrng_fill remains dirty even after hwrng_unregister() returns. In this
case, subsequent calls to hwrng_register() will fail to start new
threads, and hwrng_unregister() will call kthread_stop() on the same
freed task. In both cases, a use-after-free occurs:
refcount_t: addition on 0; use-after-free.
WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0
Call Trace:
kthread_stop+0x181/0x360
hwrng_unregister+0x288/0x380
virtrng_remove+0xe3/0x200
This patch fixes the race by protecting the global hwrng_fill pointer
inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only
once, and calls to kthread_run() and kthread_stop() are serialized
with the lock held.
To avoid deadlock in hwrng_fillfn() while being stopped with the lock
held, we convert current_rng to RCU, so that get_current_rng() can read
current_rng without holding the lock. To remove the lock from put_rng(),
we also delay the actual cleanup into a work_struct.
Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR()
checks are removed from its callers.
With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no
longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns
directly after current_rng is dropped, kthread_stop() would be called on
a freed task_struct later. To fix this, hwrng_fillfn() calls schedule()
now to keep the task alive until being stopped. The kthread_stop() call
is also moved from hwrng_unregister() to drop_current_rng(), ensuring
kthread_stop() is called on all possible paths where current_rng becomes
NULL, so that the thread would not wait forever.
Fixes: be4000bc46 ("hwrng: create filler thread")
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Lianjie Wang <karin0.zst@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e74b96d77d ]
The HW RNG core allows for manual selection of which RNG device to use,
but does not allow for no device to be enabled. It may be desirable to
do this on systems with only a single suitable hardware RNG, where we
need exclusive access to other functionality on this device. In
particular when performing TPM firmware upgrades this lets us ensure the
kernel does not try to access the device.
Before:
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
After:
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
root@debian-qemu-efi:~# echo none > /sys/devices/virtual/misc/hw_random/rng_current
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:none
grep: /sys/devices/virtual/misc/hw_random/rng_quality: No such device
/sys/devices/virtual/misc/hw_random/rng_selected:1
(Observe using bpftrace no calls to TPM being made)
root@debian-qemu-efi:~# echo "" > /sys/devices/virtual/misc/hw_random/rng_current
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
(Observe using bpftrace that calls to the TPM resume)
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: cc2f39d6ac ("hwrng: core - use RCU and work_struct to fix race condition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccb679fdae ]
The starfive_aes_aead_do_one_req() function allocates rctx->adata with
kzalloc() but fails to free it if sg_copy_to_buffer() or
starfive_aes_hw_init() fails, which lead to memory leaks.
Since rctx->adata is unconditionally freed after the write_adata
operations, ensure consistent cleanup by freeing the allocation in these
earlier error paths as well.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 7467147ef9 ("crypto: starfive - Use dma for aes requests")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46a03ea50b ]
Remove duplicate entries from the bprm_stack_limits KUnit test vector
table. The duplicates do not add coverage and only increase test size.
Signed-off-by: Titouan Ameline de Cadeville <titouan.ameline@gmail.com>
Fixes: 60371f43e5 ("exec: Add KUnit test for bprm_stack_limits()")
Link: https://patch.msgid.link/20260203175950.43710-1-titouan.ameline@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94894c9c47 ]
CPU0 becomes overloaded when hosting a CPU-bound RT task, a non-CPU-bound
RT task, and a CFS task stuck in kernel space. When other CPUs switch from
RT to non-RT tasks, RT load balancing (LB) is triggered; with
HAVE_RT_PUSH_IPI enabled, they send IPIs to CPU0 to drive the execution
of rto_push_irq_work_func. During push_rt_task on CPU0,
if next_task->prio < rq->donor->prio, resched_curr() sets NEED_RESCHED
and after the push operation completes, CPU0 calls rto_next_cpu().
Since only CPU0 is overloaded in this scenario, rto_next_cpu() should
ideally return -1 (no further IPI needed).
However, multiple CPUs invoking tell_cpu_to_push() during LB increments
rd->rto_loop_next. Even when rd->rto_cpu is set to -1, the mismatch between
rd->rto_loop and rd->rto_loop_next forces rto_next_cpu() to restart its
search from -1. With CPU0 remaining overloaded (satisfying rt_nr_migratory
&& rt_nr_total > 1), it gets reselected, causing CPU0 to queue irq_work to
itself and send self-IPIs repeatedly. As long as CPU0 stays overloaded and
other CPUs run pull_rt_tasks(), it falls into an infinite self-IPI loop,
which triggers a CPU hardlockup due to continuous self-interrupts.
The trigging scenario is as follows:
cpu0 cpu1 cpu2
pull_rt_task
tell_cpu_to_push
<------------irq_work_queue_on
rto_push_irq_work_func
push_rt_task
resched_curr(rq) pull_rt_task
rto_next_cpu tell_cpu_to_push
<-------------------------- atomic_inc(rto_loop_next)
rd->rto_loop != next
rto_next_cpu
irq_work_queue_on
rto_push_irq_work_func
Fix redundant self-IPI by filtering the initiating CPU in rto_next_cpu().
This solution has been verified to effectively eliminate spurious self-IPIs
and prevent CPU hardlockup scenarios.
Fixes: 4bdced5c9a ("sched/rt: Simplify the IPI based RT balancing logic")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Chen Jinghuang <chenjinghuang2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://patch.msgid.link/20260122012533.673768-1-chenjinghuang2@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cb3b27693 ]
The defer params were not cleared in __dl_clear_params. Clear them.
Without this is some of my test cases are flaking and the DL timer is
not starting correctly AFAICS.
Fixes: a110a81c52 ("sched/deadline: Deferrable dl server")
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260126100050.3854740-2-arighi@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef92b98f5f ]
The interrupt handler iio_trigger_generic_data_rdy_poll() will invoke other
interrupt handlers and this supposed to happen from hard interrupt context.
Use IRQF_NO_THREAD to forbid forced-threading.
Fixes: 0ab13674a9 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-21-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 553b4999cb ]
Using a threaded interrupt without a dedicated primary handler mandates
the IRQF_ONESHOT flag to mask the interrupt source while the threaded
handler is active. Otherwise the interrupt can fire again before the
threaded handler had a chance to run.
Mark explained that this should not happen with this hardware since it
is a slow irqchip which is behind an I2C/ SPI bus but the IRQ-core will
refuse to accept such a handler.
Set IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: 1c6c69525b ("genirq: Reject bogus threaded irq requests")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-16-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c858d6c66 ]
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Fixes: a29d64a45e ("EDAC, altera: Add IRQ Flags to disable IRQ while handling")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-11-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd81f07e9a ]
There is no added value in efct_intr_msix() compared to
irq_default_primary_handler().
Using a threaded interrupt without a dedicated primary handler mandates
the IRQF_ONESHOT flag to mask the interrupt source while the threaded
handler is active. Otherwise the interrupt can fire again before the
threaded handler had a chance to run.
Use the default primary interrupt handler by specifying NULL and set
IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: 4df84e8466 ("scsi: elx: efct: Driver initialization routines")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-8-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28abed6569 ]
There is no added value in btintel_pcie_msix_isr() compared to
irq_default_primary_handler().
Using a threaded interrupt without a dedicated primary handler mandates
the IRQF_ONESHOT flag to mask the interrupt source while the threaded
handler is active. Otherwise the interrupt can fire again before the
threaded handler had a chance to run.
Use the default primary interrupt handler by specifying NULL and set
IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-7-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6bc712877 ]
Passing IRQF_ONESHOT ensures that the interrupt source is masked until the
secondary (threaded) handler is done. If only a primary handler is used
then the flag makes no sense because the interrupt cannot fire (again)
while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
The flag was added to match the flag on the shared handler which uses a
threaded handler and therefore IRQF_ONESHOT. This is no longer needed
because devm_request_irq() now passes IRQF_COND_ONESHOT for this case.
Revert adding IRQF_ONESHOT to irqflags.
Fixes: 8f812373d1 ("platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()")
Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-3-bigeasy@linutronix.de
Closes: https://lore.kernel.org/all/555f1c56-0f74-41bf-8bd2-6217e0aab0c6@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 943b052ded ]
The flag IRQF_COND_ONESHOT was already force-added to request_irq() because
the ACPI SCI interrupt handler is using the IRQF_ONESHOT flag which breaks
all shared handlers.
devm_request_irq() needs the same change since some users, such as
int0002_vgpio, are using this function instead.
Add IRQF_COND_ONESHOT to the flags passed to devm_request_irq().
Fixes: c37927a203 ("genirq: Set IRQF_COND_ONESHOT in request_irq()")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6557f1565d ]
While making some maps in Cilium read-only from the BPF side, we noticed
that the bpf_xdp_store_bytes proto is incorrect. In particular, the
verifier was throwing the following error:
; ret = ctx_store_bytes(ctx, l3_off + offsetof(struct iphdr, saddr),
&nat->address, 4, 0);
635: (79) r1 = *(u64 *)(r10 -144) ; R1=ctx() R10=fp0 fp-144=ctx()
636: (b4) w2 = 26 ; R2=26
637: (b4) w4 = 4 ; R4=4
638: (b4) w5 = 0 ; R5=0
639: (85) call bpf_xdp_store_bytes#190
write into map forbidden, value_size=6 off=0 size=4
nat comes from a BPF_F_RDONLY_PROG map, so R3 is a PTR_TO_MAP_VALUE.
The verifier checks the helper's memory access to R3 in
check_mem_size_reg, as it reaches ARG_CONST_SIZE argument. The third
argument has expected type ARG_PTR_TO_UNINIT_MEM, which includes the
MEM_WRITE flag. The verifier thus checks for a BPF_WRITE access on R3.
Given R3 points to a read-only map, the check fails.
Conversely, ARG_PTR_TO_UNINIT_MEM can also lead to the helper reading
from uninitialized memory.
This patch simply fixes the expected argument type to match that of
bpf_skb_store_bytes.
Fixes: 3f364222d0 ("net: xdp: introduce bpf_xdp_pointer utility routine")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/9fa3c9f72d806e82541071c4df88b8cba28ad6a9.1769875479.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d43252b30 ]
When commit 0e1a4d427f ("crypto: caam: Unembed net_dev structure in
dpaa2") converted embedded net_device to dynamically allocated pointers,
it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in
dpaa2_dpseci_free() for error paths.
This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe
due to DPIO devices not being ready yet. The kernel's deferred probe
mechanism handles the retry successfully, but the netdevs allocated during
the failed probe attempt are never freed, resulting in kmemleak reports
showing multiple leaked netdev-related allocations all traced back to
dpaa2_caam_probe().
Fix this by preserving the CPU mask of allocated netdevs during setup and
using it for cleanup in dpaa2_dpseci_free(). This approach ensures that
only the CPUs that actually had netdevs allocated will be cleaned up,
avoiding potential issues with CPU hotplug scenarios.
Fixes: 0e1a4d427f ("crypto: caam: Unembed net_dev structure in dpaa2")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d3135057f ]
Since the number of devices is limited, and the number
of tfms may exceed the number of devices, to ensure that
tfms can be successfully allocated, support tfms
sharing the same device.
Fixes: e4d9d10ef4 ("crypto: hisilicon/trng - add support for PRNG")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aea2517999 ]
Mahe reported missing function from stack trace on top of kprobe
multi program. The missing function is the very first one in the
stacktrace, the one that the bpf program is attached to.
# bpftrace -e 'kprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
('*' is used for kprobe_multi attachment)
The reason is that the previous change (the Fixes commit) fixed
stack unwind for tracepoint, but removed attached function address
from the stack trace on top of kprobe multi programs, which I also
overlooked in the related test (check following patch).
The tracepoint and kprobe_multi have different stack setup, but use
same unwind path. I think it's better to keep the previous change,
which fixed tracepoint unwind and instead change the kprobe multi
unwind as explained below.
The bpf program stack unwind calls perf_callchain_kernel for kernel
portion and it follows two unwind paths based on X86_EFLAGS_FIXED
bit in pt_regs.flags.
When the bit set we unwind from stack represented by pt_regs argument,
otherwise we unwind currently executed stack up to 'first_frame'
boundary.
The 'first_frame' value is taken from regs.rsp value, but ftrace_caller
and ftrace_regs_caller (ftrace trampoline) functions set the regs.rsp
to the previous stack frame, so we skip the attached function entry.
If we switch kprobe_multi unwind to use the X86_EFLAGS_FIXED bit,
we set the start of the unwind to the attached function address.
As another benefit we also cut extra unwind cycles needed to reach
the 'first_frame' boundary.
The speedup can be measured with trigger bench for kprobe_multi
program and stacktrace support.
- trigger bench with stacktrace on current code:
kprobe-multi : 0.810 ± 0.001M/s
kretprobe-multi: 0.808 ± 0.001M/s
- and with the fix:
kprobe-multi : 1.264 ± 0.001M/s
kretprobe-multi: 1.401 ± 0.002M/s
With the fix, the entry probe stacktrace:
# bpftrace -e 'kprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
__x64_sys_newuname+9
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
The return probe skips the attached function, because it's no longer
on the stack at the point of the unwind and this way is the same how
standard kretprobe works.
# bpftrace -e 'kretprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
Fixes: 6d08340d1e ("Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"")
Reported-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-3-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20a0bc1027 ]
Currently we don't get stack trace via ORC unwinder on top of fgraph exit
handler. We can see that when generating stacktrace from kretprobe_multi
bpf program which is based on fprobe/fgraph.
The reason is that the ORC unwind code won't get pass the return_to_handler
callback installed by fgraph return probe machinery.
Solving this by creating stack frame in return_to_handler expected by
ftrace_graph_ret_addr function to recover original return address and
continue with the unwind.
Also updating the pt_regs data with cs/flags/rsp which are needed for
successful stack retrieval from ebpf bpf_get_stackid helper.
- in get_perf_callchain we check user_mode(regs) so CS has to be set
- in perf_callchain_kernel we call perf_hw_regs(regs), so EFLAGS/FIXED
has to be unset
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: aea2517999 ("x86/fgraph,bpf: Switch kprobe_multi program stack unwind to hw_regs path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5d01b7199 ]
Add ftrace_fill_perf_regs() which should be compatible with the
perf_fetch_caller_regs(). In other words, the pt_regs returned from the
ftrace_fill_perf_regs() must satisfy 'user_mode(regs) == false' and can be
used for stack tracing.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/173518997908.391279.15910334347345106424.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: aea2517999 ("x86/fgraph,bpf: Switch kprobe_multi program stack unwind to hw_regs path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9b55c8912 ]
Add ftrace_partial_regs() which converts the ftrace_regs to pt_regs.
This is for the eBPF which needs this to keep the same pt_regs interface
to access registers.
Thus when replacing the pt_regs with ftrace_regs in fprobes (which is
used by kprobe_multi eBPF event), this will be used.
If the architecture defines its own ftrace_regs, this copies partial
registers to pt_regs and returns it. If not, ftrace_regs is the same as
pt_regs and ftrace_partial_regs() will return ftrace_regs::regs.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Florent Revest <revest@chromium.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Link: https://lore.kernel.org/173518996761.391279.4987911298206448122.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: aea2517999 ("x86/fgraph,bpf: Switch kprobe_multi program stack unwind to hw_regs path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d17932da4 ]
Rename ftrace_regs_return_value to ftrace_regs_get_return_value as same as
other ftrace_regs_get/set_* APIs. arm64 and riscv are already using this
new name.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/172895573350.107311.7564634260652361511.stgit@devnote2
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: aea2517999 ("x86/fgraph,bpf: Switch kprobe_multi program stack unwind to hw_regs path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b582611a8 ]
Since the arch_ftrace_get_regs(fregs) is only valid when the
FL_SAVE_REGS is set, we need to use `&arch_ftrace_regs()->regs` for
ftrace_regs_*() APIs because those APIs are for ftrace_regs, not
complete pt_regs.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/172895572290.107311.16057631001860177198.stgit@devnote2
Fixes: e4cf33ca48 ("ftrace: Consolidate ftrace_regs accessor functions for archs using pt_regs")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: aea2517999 ("x86/fgraph,bpf: Switch kprobe_multi program stack unwind to hw_regs path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4cf33ca48 ]
Most architectures use pt_regs within ftrace_regs making a lot of the
accessor functions just calls to the pt_regs internally. Instead of
duplication this effort, use a HAVE_ARCH_FTRACE_REGS for architectures
that have their own ftrace_regs that is not based on pt_regs and will
define all the accessor functions, and for the architectures that just use
pt_regs, it will leave it undefined, and the default accessor functions
will be used.
Note, this will also make it easier to add new accessor functions to
ftrace_regs as it will mean having to touch less architectures.
Cc: <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241010202114.2289f6fd@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # powerpc
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: aea2517999 ("x86/fgraph,bpf: Switch kprobe_multi program stack unwind to hw_regs path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7888af4166 ]
ftrace_regs was created to hold registers that store information to save
function parameters, return value and stack. Since it is a subset of
pt_regs, it should only be used by its accessor functions. But because
pt_regs can easily be taken from ftrace_regs (on most archs), it is
tempting to use it directly. But when running on other architectures, it
may fail to build or worse, build but crash the kernel!
Instead, make struct ftrace_regs an empty structure and have the
architectures define __arch_ftrace_regs and all the accessor functions
will typecast to it to get to the actual fields. This will help avoid
usage of ftrace_regs directly.
Link: https://lore.kernel.org/all/20241007171027.629bdafd@gandalf.local.home/
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241008230628.958778821@goodmis.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: aea2517999 ("x86/fgraph,bpf: Switch kprobe_multi program stack unwind to hw_regs path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a370b72ec7 ]
To clarify what will be expected on ftrace_regs, add a comment to the
architecture independent definition of the ftrace_regs.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: aea2517999 ("x86/fgraph,bpf: Switch kprobe_multi program stack unwind to hw_regs path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 929e30f931 ]
A socket using sockmap has its own independent receive queue: ingress_msg.
This queue may contain data from its own protocol stack or from other
sockets.
Therefore, for sockmap, relying solely on copied_seq and rcv_nxt to
calculate FIONREAD is not enough.
This patch adds a new msg_tot_len field in the psock structure to record
the data length in ingress_msg. Additionally, we implement new ioctl
interfaces for TCP and UDP to intercept FIONREAD operations.
Note that we intentionally do not include sk_receive_queue data in the
FIONREAD result. Data in sk_receive_queue has not yet been processed by
the BPF verdict program, and may be redirected to other sockets or
dropped. Including it would create semantic ambiguity since this data
may never be readable by the user.
Unix and VSOCK sockets have similar issues, but fixing them is outside
the scope of this patch as it would require more intrusive changes.
Previous work by John Fastabend made some efforts towards FIONREAD support:
commit e5c6de5fa0 ("bpf, sockmap: Incorrectly handling copied_seq")
Although the current patch is based on the previous work by John Fastabend,
it is acceptable for our Fixes tag to point to the same commit.
FD1:read()
-- FD1->copied_seq++
| [read data]
|
[enqueue data] v
[sockmap] -> ingress to self -> ingress_msg queue
FD1 native stack ------> ^
-- FD1->rcv_nxt++ -> redirect to other | [enqueue data]
| |
| ingress to FD1
v ^
... | [sockmap]
FD2 native stack
Fixes: 04919bed94 ("tcp: Introduce tcp_read_skb()")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20260124113314.113584-3-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b40cc5adaa ]
A socket using sockmap has its own independent receive queue: ingress_msg.
This queue may contain data from its own protocol stack or from other
sockets.
The issue is that when reading from ingress_msg, we update tp->copied_seq
by default. However, if the data is not from its own protocol stack,
tcp->rcv_nxt is not increased. Later, if we convert this socket to a
native socket, reading from this socket may fail because copied_seq might
be significantly larger than rcv_nxt.
This fix also addresses the syzkaller-reported bug referenced in the
Closes tag.
This patch marks the skmsg objects in ingress_msg. When reading, we update
copied_seq only if the data is from its own protocol stack.
FD1:read()
-- FD1->copied_seq++
| [read data]
|
[enqueue data] v
[sockmap] -> ingress to self -> ingress_msg queue
FD1 native stack ------> ^
-- FD1->rcv_nxt++ -> redirect to other | [enqueue data]
| |
| ingress to FD1
v ^
... | [sockmap]
FD2 native stack
Closes: https://syzkaller.appspot.com/bug?extid=06dbd397158ec0ea4983
Fixes: 04919bed94 ("tcp: Introduce tcp_read_skb()")
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260124113314.113584-2-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc8ccab150 ]
snp_range_list is only used in __sev_snp_init_locked() in the SNP_INIT_EX
case, move the declaration there and add a __free() cleanup helper for it
instead of waiting until shutdown.
Fixes: 1ca5614b84 ("crypto: ccp: Add support to initialize the AMD-SP for SEV-SNP")
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ceac7fb89e ]
Modify the behavior of implicit SEV initialization in some of the
SEV ioctls to do both SEV initialization and shutdown and add
implicit SNP initialization and shutdown to some of the SNP ioctls
so that the change of SEV/SNP platform initialization not being
done during PSP driver probe time does not break userspace tools
such as sevtool, etc.
Prior to this patch, SEV has always been initialized before these
ioctls as SEV initialization is done as part of PSP module probe,
but now with SEV initialization being moved to KVM module load instead
of PSP driver probe, the implied SEV INIT actually makes sense and gets
used and additionally to maintain SEV platform state consistency
before and after the ioctl SEV shutdown needs to be done after the
firmware call.
It is important to do SEV Shutdown here with the SEV/SNP initialization
moving to KVM, an implicit SEV INIT here as part of the SEV ioctls not
followed with SEV Shutdown will cause SEV to remain in INIT state and
then a future SNP INIT in KVM module load will fail.
Also ensure that for these SEV ioctls both implicit SNP and SEV INIT is
done followed by both SEV and SNP shutdown as RMP table must be
initialized before calling SEV INIT if SNP host support is enabled.
Similarly, prior to this patch, SNP has always been initialized before
these ioctls as SNP initialization is done as part of PSP module probe,
therefore, to keep a consistent behavior, SNP init needs to be done
here implicitly as part of these ioctls followed with SNP shutdown
before returning from the ioctl to maintain the consistent platform
state before and after the ioctl.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: dc8ccab150 ("crypto: ccp - narrow scope of snp_range_list")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d6446f409 ]
It turns out that __run_hrtimer() will trace like:
<idle>-0 [032] d.h2. 20705.474563: hrtimer_cancel: hrtimer=0xff2db8f77f8226e8
<idle>-0 [032] d.h1. 20705.474563: hrtimer_expire_entry: hrtimer=0xff2db8f77f8226e8 now=20699452001850 function=tick_nohz_handler/0x0
Which is a bit nonsensical, the timer doesn't get canceled on
expiration. The cause is the use of the incorrect debug helper.
Fixes: c6a2a17702 ("hrtimer: Add tracepoint for hrtimers")
Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260121143208.219595606@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a32ae26584 ]
When wq__attach() fails, serial_test_wq() returns early without calling
wq__destroy(), leaking the skeleton resources allocated by
wq__open_and_load(). This causes ASAN leak reports in selftests runs.
Fix this by jumping to a common clean_up label that calls wq__destroy()
on all exit paths after successful open_and_load.
Note that the early return after wq__open_and_load() failure is correct
and doesn't need fixing, since that function returns NULL on failure
(after internally cleaning up any partial allocations).
Fixes: 8290dba519 ("selftests/bpf: wq: add bpf_wq_start() checks")
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20260121094114.1801-3-qikeyu2017@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af9e89d8dd ]
sync_linked_regs() copies the id of known_reg to reg when propagating
bounds of known_reg to reg using the off of known_reg, but when
known_reg was linked to reg like:
known_reg = reg ; both known_reg and reg get same id
known_reg += 4 ; known_reg gets off = 4, and its id gets BPF_ADD_CONST
now when a call to sync_linked_regs() happens, let's say with the following:
if known_reg >= 10 goto pc+2
known_reg's new bounds are propagated to reg but now reg gets
BPF_ADD_CONST from the copy.
This means if another link to reg is created like:
another_reg = reg ; another_reg should get the id of reg but
assign_scalar_id_before_mov() sees
BPF_ADD_CONST on reg and assigns a new id to it.
As reg has a new id now, known_reg's link to reg is broken. If we find
new bounds for known_reg, they will not be propagated to reg.
This can be seen in the selftest added in the next commit:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (bf) r2 = r0 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R2=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255)
6: (a5) if r1 < 0xe goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=14,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
7: (35) if r0 >= 0xa goto pc+1 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=9,var_off=(0x0; 0xf))
8: (37) r0 /= 0
div by zero
When 4 is verified, r1's bounds are propagated to r0 but r0 also gets
BPF_ADD_CONST (bug).
When 5 is verified, r0 gets a new id (2) and its link with r1 is broken.
After 6 we know r1 has bounds [14, 259] and therefore r0 should have
bounds [10, 255], therefore the branch at 7 is always taken. But because
r0's id was changed to 2, r1's new bounds are not propagated to r0.
The verifier still thinks r0 has bounds [6, 255] before 7 and execution
can reach div by zero.
Fix this by preserving id in sync_linked_regs() like off and subreg_def.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260115151143.1344724-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e750743962 ]
When all hardware queues are busy and no shareable queue,
new processes fail to apply for queues. To avoid affecting
tasks, support fallback mechanism when hardware queues are
unavailable.
Fixes: c16a70c1f2 ("crypto: hisilicon/sec - add new algorithm mode for AEAD")
Signed-off-by: Qi Tao <taoqi10@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19c2475ce1 ]
In the shared queue design, multiple tfms use same qp, and one qp
need to corresponds to multiple qp_ctx. So use tag to obtain the
req virtual address. Build a one-to-one relationship between tfm
and qp_ctx. finaly remove the old get_tag operation.
Fixes: 2bcf36348c ("crypto: hisilicon/zip - initialize operations about 'sqe' in 'acomp_alg.init'")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 624a6760bf ]
The size of the buffer in alloc_command_queues() is
curr->size + OTX_CPT_NEXT_CHUNK_PTR_SIZE, so used that length for
dma_free_coherent().
Fixes: 10b4f09491 ("crypto: marvell - add the Virtual Function driver for CPT")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
