commit 22bec11a56 upstream.
When the function tracing_set_tracer() switched over to using the guard()
infrastructure, it did not need to save the 'ret' variable and would just
return the value when an error arised, instead of setting ret and jumping
to an out label.
When CONFIG_TRACER_SNAPSHOT is enabled, it had code that expected the
"ret" variable to be initialized to zero and had set 'ret' while holding
an arch_spin_lock() (not used by guard), and then upon releasing the lock
it would check 'ret' and exit if set. But because ret was only set when an
error occurred while holding the locks, 'ret' would be used uninitialized
if there was no error. The code in the CONFIG_TRACER_SNAPSHOT block should
be self contain. Make sure 'ret' is also set when no error occurred.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250106111143.2f90ff65@gandalf.local.home
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202412271654.nJVBuwmF-lkp@intel.com/
Fixes: d33b10c0c7 ("tracing: Switch trace.c code over to use guard()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8eb4b09e0b upstream.
Check if a function is already in the manager ops of a subops. A manager
ops contains multiple subops, and if two or more subops are tracing the
same function, the manager ops only needs a single entry in its hash.
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.226762894@goodmis.org
Fixes: 4f554e9556 ("ftrace: Add ftrace_set_filter_ips function")
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38b1406194 upstream.
Function graph uses a subops and manager ops mechanism to attach to
ftrace. The manager ops connects to ftrace and the functions it connects
to is defined by a list of subops that it manages.
The function hash that defines what the above ops attaches to limits the
functions to attach if the hash has any content. If the hash is empty, it
means to trace all functions.
The creation of the manager ops hash is done by iterating over all the
subops hashes. If any of the subops hashes is empty, it means that the
manager ops hash must trace all functions as well.
The issue is in the creation of the manager ops. When a second subops is
attached, a new hash is created by starting it as NULL and adding the
subops one at a time. But the NULL ops is mistaken as an empty hash, and
once an empty hash is found, it stops the loop of subops and just enables
all functions.
# echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# echo "f:myevent2 schedule_timeout" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
trace_initcall_start_cb (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
run_init_process (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
try_to_run_init_process (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
x86_pmu_show_pmu_cap (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
cleanup_rapl_pmus (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_free_pcibus_map (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_types_exit (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_pci_exit.part.0 (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
kvm_shutdown (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
vmx_dump_msrs (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
vmx_cleanup_l1d_flush (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
[..]
Fix this by initializing the new hash to NULL and if the hash is NULL do
not treat it as an empty hash but instead allocate by copying the content
of the first sub ops. Then on subsequent iterations, the new hash will not
be NULL, but the content of the previous subops. If that first subops
attached to all functions, then new hash may assume that the manager ops
also needs to attach to all functions.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.060300046@goodmis.org
Fixes: 5fccc7552c ("ftrace: Add subops logic to allow one ops to manage many")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57b76bedc5 upstream.
The function tracer should record the preemption level at the point when
the function is invoked. If the tracing subsystem decrement the
preemption counter it needs to correct this before feeding the data into
the trace buffer. This was broken in the commit cited below while
shifting the preempt-disabled section.
Use tracing_gen_ctx_dec() which properly subtracts one from the
preemption counter on a preemptible kernel.
Cc: stable@vger.kernel.org
Cc: Wander Lairson Costa <wander@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/20250220140749.pfw8qoNZ@linutronix.de
Fixes: ce5e48036c ("ftrace: disable preemption when recursion locked")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c158647c10 upstream.
The previous implementation incorrectly configured the cmn_interrupt_2_enable
register for interrupt handling. Using cmn_interrupt_2_enable to configure
Tag, Data RAM ECC interrupts would lead to issues like double handling of the
interrupts (EL1 and EL3) as cmn_interrupt_2_enable is meant to be configured
for interrupts which needs to be handled by EL3.
EL1 LLCC EDAC driver needs to use cmn_interrupt_0_enable register to configure
Tag, Data RAM ECC interrupts instead of cmn_interrupt_2_enable.
Fixes: 27450653f1 ("drivers: edac: Add EDAC driver support for QCOM SoCs")
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20241119064608.12326-1-quic_kbajaj@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 860ca5e50f upstream.
Add check for the return value of cifs_buf_get() and cifs_small_buf_get()
in receive_encrypted_standard() to prevent null pointer dereference.
Fixes: eec04ea119 ("smb: client: fix OOB in receive_encrypted_standard()")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4cb7779384 upstream.
Christoph reports that their rk3399 system dies since commit 773c05f417
("irqchip/gic-v3: Work around insecure GIC integrations").
It appears that some rk3399 have secure payloads, and that the firmware
sets SCR_EL3.FIQ==1. Obivously, disabling security in that configuration
leads to even more problems.
Revisit the workaround by:
- making it rk3399 specific
- checking whether Group-0 is available, which is a good proxy
for SCR_EL3.FIQ being 0
- either apply the workaround if Group-0 is available, or disable
pseudo-NMIs if not
Note that this doesn't mean that the secure side is able to receive
interrupts, as all interrupts are made non-secure anyway.
Clearly, nobody ever tested secure interrupts on this platform.
Fixes: 773c05f417 ("irqchip/gic-v3: Work around insecure GIC integrations")
Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250215185241.3768218-1-maz@kernel.org
Closes: https://lore.kernel.org/r/b1266652fb64857246e8babdf268d0df8f0c36d9.camel@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 782cffeec9 upstream.
According to the latest event list, update the event constraint tables
for Lion Cove core.
The general rule (the event codes < 0x90 are restricted to counters
0-3.) has been removed. There is no restriction for most of the
performance monitoring events.
Fixes: a932aa0e86 ("perf/x86: Add Lunar Lake and Arrow Lake support")
Reported-by: Amiri Khalil <amiri.khalil@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250219141005.2446823-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f37d135b42 upstream.
dma_map_single is using physical/bus device (DMA) but dma_unmap_single
is using framework device(NAND controller), which is incorrect.
Fixed dma_unmap_single to use correct physical/bus device.
Fixes: ec4ba01e89 ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d76d22b509 upstream.
Remap the slave DMA I/O resources to enhance driver portability.
Using a physical address causes DMA translation failure when the
ARM SMMU is enabled.
Fixes: ec4ba01e89 ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ede647a6f upstream.
Add a sanity check to madvise_dontneed_free() to address a corner case in
madvise where a race condition causes the current vma being processed to
be backed by a different page size.
During a madvise(MADV_DONTNEED) call on a memory region registered with a
userfaultfd, there's a period of time where the process mm lock is
temporarily released in order to send a UFFD_EVENT_REMOVE and let
userspace handle the event. During this time, the vma covering the
current address range may change due to an explicit mmap done concurrently
by another thread.
If, after that change, the memory region, which was originally backed by
4KB pages, is now backed by hugepages, the end address is rounded down to
a hugepage boundary to avoid data loss (see "Fixes" below). This rounding
may cause the end address to be truncated to the same address as the
start.
Make this corner case follow the same semantics as in other similar cases
where the requested region has zero length (ie. return 0).
This will make madvise_walk_vmas() continue to the next vma in the range
(this time holding the process mm lock) which, due to the prev pointer
becoming stale because of the vma change, will be the same hugepage-backed
vma that was just checked before. The next time madvise_dontneed_free()
runs for this vma, if the start address isn't aligned to a hugepage
boundary, it'll return -EINVAL, which is also in line with the madvise
api.
From userspace perspective, madvise() will return EINVAL because the start
address isn't aligned according to the new vma alignment requirements
(hugepage), even though it was correctly page-aligned when the call was
issued.
Link: https://lkml.kernel.org/r/20250203075206.1452208-1-rcn@igalia.com
Fixes: 8ebe0a5eaa ("mm,madvise,hugetlb: fix unexpected data loss with MADV_DONTNEED on hugetlbfs")
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Florent Revest <revest@google.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56d5f3eba3 upstream.
In [1] it was reported that the acct(2) system call can be used to
trigger NULL deref in cases where it is set to write to a file that
triggers an internal lookup. This can e.g., happen when pointing acc(2)
to /sys/power/resume. At the point the where the write to this file
happens the calling task has already exited and called exit_fs(). A
lookup will thus trigger a NULL-deref when accessing current->fs.
Reorganize the code so that the the final write happens from the
workqueue but with the caller's credentials. This preserves the
(strange) permission model and has almost no regression risk.
This api should stop to exist though.
Link: https://lore.kernel.org/r/20250127091811.3183623-1-quzicheng@huawei.com [1]
Link: https://lore.kernel.org/r/20250211-work-acct-v1-1-1c16aecab8b3@kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Zicheng Qu <quzicheng@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46c7b901e2 upstream.
The spcm->stream[substream->stream].substream is set during open and was
left untouched. After the first PCM stream it will never be NULL and we
have code which checks for substream NULLity as indication if the stream is
active or not.
For the compressed cstream pointer the same has been done, this change will
correct the handling of PCM streams.
Fixes: 090349a9fe ("ASoC: SOF: Add support for compress API for stream data/offset")
Cc: stable@vger.kernel.org
Reported-by: Curtis Malainey <cujomalainey@chromium.org>
Closes: https://github.com/thesofproject/linux/pull/5214
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://patch.msgid.link/20250205135232.19762-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d1f86610f upstream.
Allows the LED on the dedicated mute button on the HP ProBook 450 G4
laptop to change colour correctly.
Signed-off-by: John Veness <john-linux@pelago.org.uk>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/2fb55d48-6991-4a42-b591-4c78f2fad8d7@pelago.org.uk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 822b7ec657 upstream.
Check the return value of snd_ctl_rename_id() in
snd_hda_create_dig_out_ctls(). Ensure that failures
are properly handled.
[ Note: the error cannot happen practically because the only error
condition in snd_ctl_rename_id() is the missing ID, but this is a
rename, hence it must be present. But for the code consistency,
it's safer to have always the proper return check -- tiwai ]
Fixes: 5c219a3408 ("ALSA: hda: Fix kctl->id initialization")
Cc: stable@vger.kernel.org # 6.4+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250213074543.1620-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8c9a45338 upstream.
If 'micfil->quality' received from micfil_quality_set() somehow ends
up with an unpredictable value, switch() operator will fail to
initialize local variable qsel before regmap_update_bits() tries
to utilize it.
While it is unlikely, play it safe and enable a default case that
returns -EINVAL error.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: bea1d61d58 ("ASoC: fsl_micfil: rework quality setting")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250116142436.22389-1-n.zhandarovich@fintech.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8d99c3b5c upstream.
The nullity of sps->cstream should be checked similarly as it is done in
sof_set_stream_data_offset() function.
Assuming that it is not NULL if sps->stream is NULL is incorrect and can
lead to NULL pointer dereference.
Fixes: 090349a9fe ("ASoC: SOF: Add support for compress API for stream data/offset")
Cc: stable@vger.kernel.org
Reported-by: Curtis Malainey <cujomalainey@chromium.org>
Closes: https://github.com/thesofproject/linux/pull/5214
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://patch.msgid.link/20250205135232.19762-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 415cadd505 upstream.
Before this patch the NETDEV_XDP_ACT_NDO_XMIT XDP feature flag is set by
default as part of driver initialization, and is never cleared. However,
this flag differs from others in that it is used as an indicator for
whether the driver is ready to perform the ndo_xdp_xmit operation as
part of an XDP_REDIRECT. Kernel helpers
xdp_features_(set|clear)_redirect_target exist to convey this meaning.
This patch ensures that the netdev is only reported as a redirect target
when XDP queues exist to forward traffic.
Fixes: 39a7f4aa3e ("gve: Add XDP REDIRECT support for GQI-QPL format")
Cc: stable@vger.kernel.org
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20250214224417.1237818-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 878e7b1173 upstream.
Add check for the return value of nfp_app_ctrl_msg_alloc() in
nfp_bpf_cmsg_alloc() to prevent null pointer dereference.
Fixes: ff3d43f756 ("nfp: bpf: implement helpers for FW map ops")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20250218030409.2425798-1-haoxiang_li2024@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 654292a0b2 upstream.
When the user sets a file or directory as read-only (e.g. ~S_IWUGO),
the client will set the ATTR_READONLY attribute by sending an
SMB2_SET_INFO request to the server in cifs_setattr_{,nounix}(), but
cifsInodeInfo::cifsAttrs will be left unchanged as the client will
only update the new file attributes in the next call to
{smb311_posix,cifs}_get_inode_info() with the new metadata filled in
@data parameter.
Commit a18280e7fd ("smb: cilent: set reparse mount points as
automounts") mistakenly removed the @data NULL check when calling
is_inode_cache_good(), which broke the above case as the new
ATTR_READONLY attribute would end up not being updated on files with a
read lease.
Fix this by updating the inode whenever we have cached metadata in
@data parameter.
Reported-by: Horst Reiterer <horst.reiterer@fabasoft.com>
Closes: https://lore.kernel.org/r/85a16504e09147a195ac0aac1c801280@fabasoft.com
Fixes: a18280e7fd ("smb: cilent: set reparse mount points as automounts")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4b78260fc upstream.
import_iovec() says that it should always be fine to kfree the iovec
returned in @iovp regardless of the error code. __import_iovec_ubuf()
never reallocates it and thus should clear the pointer even in cases when
copy_iovec_*() fail.
Link: https://lkml.kernel.org/r/378ae26923ffc20fd5e41b4360d673bf47b1775b.1738332461.git.asml.silence@gmail.com
Fixes: 3b2deb0e46 ("iov_iter: import single vector iovecs as ITER_UBUF")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66314e9a57 upstream.
I received a report from the release engineering side of the house that
xfs_scrub without the -n flag (aka fix it mode) would try to fix a
broken filesystem even on a kernel that doesn't have online repair built
into it:
# xfs_scrub -dTvn /mnt/test
EXPERIMENTAL xfs_scrub program in use! Use at your own risk!
Phase 1: Find filesystem geometry.
/mnt/test: using 1 threads to scrub.
Phase 1: Memory used: 132k/0k (108k/25k), time: 0.00/ 0.00/ 0.00s
<snip>
Phase 4: Repair filesystem.
<snip>
Info: /mnt/test/some/victimdir directory entries: Attempting repair. (repair.c line 351)
Corruption: /mnt/test/some/victimdir directory entries: Repair unsuccessful; offline repair required. (repair.c line 204)
Source: https://blogs.oracle.com/linux/post/xfs-online-filesystem-repair
It is strange that xfs_scrub doesn't refuse to run, because the kernel
is supposed to return EOPNOTSUPP if we actually needed to run a repair,
and xfs_io's repair subcommand will perror that. And yet:
# xfs_io -x -c 'repair probe' /mnt/test
#
The first problem is commit dcb660f922 (4.15) which should have had
xchk_probe set the CORRUPT OFLAG so that any of the repair machinery
will get called at all.
It turns out that some refactoring that happened in the 6.6-6.8 era
broke the operation of this corner case. What we *really* want to
happen is that all the predicates that would steer xfs_scrub_metadata()
towards calling xrep_attempt() should function the same way that they do
when repair is compiled in; and then xrep_attempt gets to return the
fatal EOPNOTSUPP error code that causes the probe to fail.
Instead, commit 8336a64eb7 (6.6) started the failwhale swimming by
hoisting OFLAG checking logic into a helper whose non-repair stub always
returns false, causing scrub to return "repair not needed" when in fact
the repair is not supported. Prior to that commit, the oflag checking
that was open-coded in scrub.c worked correctly.
Similarly, in commit 4bdfd7d157 (6.8) we hoisted the IFLAG_REPAIR
and ALREADY_FIXED logic into a helper whose non-repair stub always
returns false, so we never enter the if test body that would have called
xrep_attempt, let alone fail to decode the OFLAGs correctly.
The final insult (yes, we're doing The Naked Gun now) is commit
48a72f6086 (6.8) in which we hoisted the "are we going to try a
repair?" predicate into yet another function with a non-repair stub
always returns false.
Fix xchk_probe to trigger xrep_probe if repair is enabled, or return
EOPNOTSUPP directly if it is not. For all the other scrub types, we
need to fix the header predicates so that the ->repair functions (which
are all xrep_notsupported) get called to return EOPNOTSUPP. Commit
48a72 is tagged here because the scrub code prior to LTS 6.12 are
incomplete and not worth patching.
Reported-by: David Flynn <david.flynn@oracle.com>
Cc: <stable@vger.kernel.org> # v6.8
Fixes: 8336a64eb7 ("xfs: don't complain about unfixed metadata when repairs were injected")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3a589fd9f upstream.
The cmma_test_essa() inline assembly uses tmp as input and output, however
tmp is specified as output only, which allows the compiler to optimize the
initialization of tmp away.
Therefore the ESSA detection may or may not work depending on previous
contents of the register that the compiler selected for tmp.
Fix this by using the correct constraint modifier.
Fixes: 468a3bc2b7 ("s390/cmma: move parsing of cmma kernel parameter to early boot code")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ae4dca718 upstream.
UART controllers without flow control seem to behave unstable
in case DMA is enabled. The issues were indicated in the message:
https://lore.kernel.org/linux-arm-kernel/CAMdYzYpXtMocCtCpZLU_xuWmOp2Ja_v0Aj0e6YFNRA-yV7u14g@mail.gmail.com/
In case of PX30-uQ7 Ringneck SoM, it was noticed that after couple
of hours of UART communication, the CPU stall was occurring,
leading to the system becoming unresponsive.
After disabling the DMA, extensive UART communication tests for
up to two weeks were performed, and no issues were further
observed.
The flow control pins for uart5 are not available on PX30-uQ7
Ringneck, as configured by pinctrl-0, so the DMA nodes were
removed on SoM dtsi.
Cc: stable@vger.kernel.org
Fixes: c484cf93f6 ("arm64: dts: rockchip: add PX30-µQ7 (Ringneck) SoM with Haikou baseboard")
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250121125604.3115235-3-lukasz.czechowski@thaumatec.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4eee627ea5 upstream.
In the PX30-uQ7 (Ringneck) SoM, the hardware CTS and RTS pins for
uart5 cannot be used for the UART CTS/RTS, because they are already
allocated for different purposes. CTS pin is routed to SUS_S3#
signal, while RTS pin is used internally and is not available on
Q7 connector. Move definition of the pinctrl-0 property from
px30-ringneck-haikou.dts to px30-ringneck.dtsi.
This commit is a dependency to next commit in the patch series,
that disables DMA for uart5.
Cc: stable@vger.kernel.org
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250121125604.3115235-2-lukasz.czechowski@thaumatec.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c8f9a0533 upstream.
The tsadc driver does not handle pinctrl "gpio" and "otpout".
Let's use the correct pinctrl names "default" and "sleep".
Additionally, Alexey Charkov's testing [1] has established that
it is necessary for pinctrl state to reference the &tsadc_shut_org
configuration rather than &tsadc_shut for the driver to function correctly.
[1] https://lkml.org/lkml/2025/1/24/966
Fixes: 32641b8ab1 ("arm64: dts: rockchip: add rk3588 thermal sensor")
Cc: stable@vger.kernel.org
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Link: https://lore.kernel.org/r/20250130053849.4902-1-eagle.alexander923@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70b0d6b0a1 upstream.
OP-TEE supplicant is a user-space daemon and it's possible for it
be hung or crashed or killed in the middle of processing an OP-TEE
RPC call. It becomes more complicated when there is incorrect shutdown
ordering of the supplicant process vs the OP-TEE client application which
can eventually lead to system hang-up waiting for the closure of the
client application.
Allow the client process waiting in kernel for supplicant response to
be killed rather than indefinitely waiting in an unkillable state. Also,
a normal uninterruptible wait should not have resulted in the hung-task
watchdog getting triggered, but the endless loop would.
This fixes issues observed during system reboot/shutdown when supplicant
got hung for some reason or gets crashed/killed which lead to client
getting hung in an unkillable state. It in turn lead to system being in
hung up state requiring hard power off/on to recover.
Fixes: 4fb0a5eb36 ("tee: add OP-TEE driver")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81570d6a7a upstream.
During the locking rework in GPIOLIB, we omitted one important use-case,
namely: setting and getting values for GPIO descriptor arrays with
array_info present.
This patch does two things: first it makes struct gpio_array store the
address of the underlying GPIO device and not chip. Next: it protects
the chip with SRCU from removal in gpiod_get_array_value_complex() and
gpiod_set_array_value_complex().
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250215095655.23152-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67b0025d19 upstream.
At the moment we can't sanely handle queuing an async request from a
multishot context, so disable them. It shouldn't matter as pollable
files / socekts don't normally do async.
Patching it in __io_read() is not the cleanest way, but it's simpler
than other options, so let's fix it there and clean up on top.
Cc: stable@vger.kernel.org
Reported-by: chase xd <sl1589472800@gmail.com>
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7d51732c125159d17db4fe16f51ec41b936973f8.1739919038.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e49477f7f7 upstream.
spin_lock/unlock() functions used in interrupt contexts could
result in a deadlock, as seen in GitLab issue #13399,
which occurs when interrupt comes in while holding a lock.
Try to remedy the problem by saving irq state before spin lock
acquisition.
v2: add irqs' state save/restore calls to all locks/unlocks in
signal_irq_work() execution (Maciej)
v3: use with spin_lock_irqsave() in guc_lrc_desc_unpin() instead
of other lock/unlock calls and add Fixes and Cc tags (Tvrtko);
change title and commit message
Fixes: 2f2cc53b5f ("drm/i915/guc: Close deregister-context race against CT-loss")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13399
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/pusppq5ybyszau2oocboj3mtj5x574gwij323jlclm5zxvimmu@mnfg6odxbpsv
(cherry picked from commit c088387ddd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 166ce267ae upstream.
Fix the port width programming in the DDI_BUF_CTL register on MTLP+,
where this had an off-by-one error.
Cc: <stable@vger.kernel.org> # v6.5+
Fixes: b66a8abaa4 ("drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-3-imre.deak@intel.com
(cherry picked from commit b2ecdabe46)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9275eabe3 upstream.
At the end of a 128b/132b link training sequence, the HW expects the
transcoder training pattern to be set to TPS2 and from that to normal
mode (disabling the training pattern). Transitioning from TPS1 directly
to normal mode leaves the transcoder in a stuck state, resulting in
page-flip timeouts later in the modeset sequence.
Atm, in case of a failure during link training, the transcoder may be
still set to output the TPS1 pattern. Later the transcoder is then set
from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading
to modeset failures later as described above. Fix this by setting the
training patter to TPS2, if the link training failed at any point.
The clue in the specification about the above HW behavior is the
explicit mention that TPS2 must be set after the link training sequence
(and there isn't a similar requirement specified for the 8b/10b link
training), see the Bspec links below.
v2: Add bspec aspect/link to the commit log. (Jani)
Bspec: 54128, 65448, 68849
Cc: stable@vger.kernel.org # v5.18+
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8b4bbaf8dd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07fb70d82e upstream.
Any active plane needs to have its crtc included in the atomic
state. For planes enabled via uapi that is all handler in the core.
But when we use a plane for joiner the uapi code things the plane
is disabled and therefore doesn't have a crtc. So we need to pull
those in by hand. We do it first thing in
intel_joiner_add_affected_crtcs() so that any newly added crtc will
subsequently pull in all of its joined crtcs as well.
The symptoms from failing to do this are:
- duct tape in the form of commit 1d5b09f8da ("drm/i915: Fix NULL
ptr deref by checking new_crtc_state")
- the plane's hw state will get overwritten by the disabled
uapi state if it can't find the uapi counterpart plane in
the atomic state from where it should copy the correct state
Cc: stable@vger.kernel.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212164330.16891-2-ville.syrjala@linux.intel.com
(cherry picked from commit 91077d1deb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8972d5a49 upstream.
In jadard_prepare() a reset pulse is generated with the following
statements (delays ommited for clarity):
gpiod_set_value(jadard->reset, 1); --> Deassert reset
gpiod_set_value(jadard->reset, 0); --> Assert reset for 10ms
gpiod_set_value(jadard->reset, 1); --> Deassert reset
However, specifying second argument of "0" to gpiod_set_value() means to
deassert the GPIO, and "1" means to assert it. If the reset signal is
defined as GPIO_ACTIVE_LOW in the DTS, the above statements will
incorrectly generate the reset pulse (inverted) and leave it asserted
(LOW) at the end of jadard_prepare().
Fix reset behavior by inverting gpiod_set_value() second argument
in jadard_prepare(). Also modify second argument to devm_gpiod_get()
in jadard_dsi_probe() to assert the reset when probing.
Do not modify it in jadard_unprepare() as it is already properly
asserted with "1", which seems to be the intended behavior.
Fixes: 6b818c533d ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240927135306.857617-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927135306.857617-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d7e3fd6582 ]
The jcore-aic irqchip does not have separate interrupt numbers reserved for
cpu-local vs global interrupts. Therefore the device drivers need to
request the given interrupt as per CPU interrupt.
69a9dcbd2d ("clocksource/drivers/jcore: Use request_percpu_irq()")
converted the clocksource driver over to request_percpu_irq(), but failed
to do add all the required changes, resulting in a failure to register PIT
interrupts.
Fix this by:
1) Explicitly mark the interrupt via irq_set_percpu_devid() in
jcore_pit_init().
2) Enable and disable the per CPU interrupt in the CPU hotplug callbacks.
3) Pass the correct per-cpu cookie to the irq handler by using
handle_percpu_devid_irq() instead of handle_percpu_irq() in
handle_jcore_irq().
[ tglx: Massage change log ]
Fixes: 69a9dcbd2d ("clocksource/drivers/jcore: Use request_percpu_irq()")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/all/20250216175545.35079-3-contact@artur-rojek.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3dbc0215e3 ]
Most kernel configs enable multiple Tegra SoC generations, causing this
typo to go unnoticed. But in the case where a kernel config is strictly
for Tegra186, this is a problem.
Fixes: 989863d7cb ("drm/nouveau/pmu: select implementation based on available firmware")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218-nouveau-gm10b-guard-v2-1-a4de71500d48@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5644c6b50f ]
The generic_map_lookup_batch currently returns EINTR if it fails with
ENOENT and retries several times on bpf_map_copy_value. The next batch
would start from the same location, presuming it's a transient issue.
This is incorrect if a map can actually have "holes", i.e.
"get_next_key" can return a key that does not point to a valid value. At
least the array of maps type may contain such holes legitly. Right now
these holes show up, generic batch lookup cannot proceed any more. It
will always fail with EINTR errors.
Rather, do not retry in generic_map_lookup_batch. If it finds a non
existing element, skip to the next key. This simple solution comes with
a price that transient errors may not be recovered, and the iteration
might cycle back to the first key under parallel deletion. For example,
Hou Tao <houtao@huaweicloud.com> pointed out a following scenario:
For LPM trie map:
(1) ->map_get_next_key(map, prev_key, key) returns a valid key
(2) bpf_map_copy_value() return -ENOMENT
It means the key must be deleted concurrently.
(3) goto next_key
It swaps the prev_key and key
(4) ->map_get_next_key(map, prev_key, key) again
prev_key points to a non-existing key, for LPM trie it will treat just
like prev_key=NULL case, the returned key will be duplicated.
With the retry logic, the iteration can continue to the key next to the
deleted one. But if we directly skip to the next key, the iteration loop
would restart from the first key for the lpm_trie type.
However, not all races may be recovered. For example, if current key is
deleted after instead of before bpf_map_copy_value, or if the prev_key
also gets deleted, then the loop will still restart from the first key
for lpm_tire anyway. For generic lookup it might be better to stay
simple, i.e. just skip to the next key. To guarantee that the output
keys are not duplicated, it is better to implement map type specific
batch operations, which can properly lock the trie and synchronize with
concurrent mutators.
Fixes: cb4d03ab49 ("bpf: Add generic support for lookup batch op")
Closes: https://lore.kernel.org/bpf/Z6JXtA1M5jAZx8xD@debian.debian/
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/85618439eea75930630685c467ccefeac0942e2b.1739171594.git.yan@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 487a3ea7b1 ]
nvme_validate_passthru_nsid() logs an err message whose format string is
split over 2 lines. There is a missing space between the two pieces,
resulting in log lines like "... does not match nsid (1)of namespace".
Add the missing space between ")" and "of". Also combine the format
string pieces onto a single line to make the err message easier to grep.
Fixes: e7d4b5493a ("nvme: factor out a nvme_validate_passthru_nsid helper")
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 578539e096 ]
nvme_tcp_init_connection() attempts to receive an ICResp PDU but only
checks that the return value from recvmsg() is non-negative. If the
sender closes the TCP connection or sends fewer than 128 bytes, this
check will pass even though the full PDU wasn't received.
Ensure the full ICResp PDU is received by checking that recvmsg()
returns the expected 128 bytes.
Additionally set the MSG_WAITALL flag for recvmsg(), as a sender could
split the ICResp over multiple TCP frames. Without MSG_WAITALL,
recvmsg() could return prematurely with only part of the PDU.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd513e0434 ]
When compiling with W=1, a warning result for the function
nvme_tcp_set_queue_io_cpu():
host/tcp.c:1578: warning: Function parameter or struct member 'queue'
not described in 'nvme_tcp_set_queue_io_cpu'
host/tcp.c:1578: warning: expecting prototype for Track the number of
queues assigned to each cpu using a global per(). Prototype was for
nvme_tcp_set_queue_io_cpu() instead
Avoid this warning by using the regular comment format for the function
nvme_tcp_set_queue_io_cpu() instead of the kdoc comment format.
Fixes: 3219378987 ("nvme-tcp: Fix I/O queue cpu spreading for multiple controllers")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73f69c6be2 ]
PHY_CMN_CLK_CFG1 register has four fields being used in the driver: DSI
clock divider, source of bitclk and two for enabling the DSI PHY PLL
clocks.
dsi_7nm_set_usecase() sets only the source of bitclk, so should leave
all other bits untouched. Use newly introduced
dsi_pll_cmn_clk_cfg1_update() to update respective bits without
overwriting the rest.
While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to
make the code more readable and obvious.
Fixes: 1ef7c99d14 ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637380/
Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-3-0943b850722c@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a97bc924a ]
PHY_CMN_CLK_CFG1 register is updated by the PHY driver and by a mux
clock from Common Clock Framework:
devm_clk_hw_register_mux_parent_hws(). There could be a path leading to
concurrent and conflicting updates between PHY driver and clock
framework, e.g. changing the mux and enabling PLL clocks.
Add dedicated spinlock to be sure all PHY_CMN_CLK_CFG1 updates are
synchronized.
While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to
make the code more readable and obvious.
Fixes: 1ef7c99d14 ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637378/
Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-2-0943b850722c@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
