[ Upstream commit d47f9717e5 ]
The original formula was inaccurate:
dd->async_depth = max(1UL, 3 * q->nr_requests / 4);
For write requests, when we assign a tags from sched_tags,
data->shallow_depth will be passed to sbitmap_find_bit,
see the following code:
nr = sbitmap_find_bit_in_word(&sb->map[index],
min_t (unsigned int,
__map_depth(sb, index),
depth),
alloc_hint, wrap);
The smaller of data->shallow_depth and __map_depth(sb, index)
will be used as the maximum range when allocating bits.
For a mmc device (one hw queue, deadline I/O scheduler):
q->nr_requests = sched_tags = 128, so according to the previous
calculation method, dd->async_depth = data->shallow_depth = 96,
and the platform is 64bits with 8 cpus, sched_tags.bitmap_tags.sb.shift=5,
sb.maps[]=32/32/32/32, 32 is smaller than 96, whether it is a read or
a write I/O, tags can be allocated to the maximum range each time,
which has not throttling effect.
In addition, refer to the methods of bfg/kyber I/O scheduler,
limit ratiois are calculated base on sched_tags.bitmap_tags.sb.shift.
This patch can throttle write requests really.
Fixes: 07757588e5 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/1691061162-22898-1-git-send-email-zhiguo.niu@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b59bc6e372 ]
Tracefs or debugfs maybe cause hundreds to thousands of PATH records,
too many PATH records maybe cause soft lockup.
For example:
1. CONFIG_KASAN=y && CONFIG_PREEMPTION=n
2. auditctl -a exit,always -S open -k key
3. sysctl -w kernel.watchdog_thresh=5
4. mkdir /sys/kernel/debug/tracing/instances/test
There may be a soft lockup as follows:
watchdog: BUG: soft lockup - CPU#45 stuck for 7s! [mkdir:15498]
Kernel panic - not syncing: softlockup: hung tasks
Call trace:
dump_backtrace+0x0/0x30c
show_stack+0x20/0x30
dump_stack+0x11c/0x174
panic+0x27c/0x494
watchdog_timer_fn+0x2bc/0x390
__run_hrtimer+0x148/0x4fc
__hrtimer_run_queues+0x154/0x210
hrtimer_interrupt+0x2c4/0x760
arch_timer_handler_phys+0x48/0x60
handle_percpu_devid_irq+0xe0/0x340
__handle_domain_irq+0xbc/0x130
gic_handle_irq+0x78/0x460
el1_irq+0xb8/0x140
__audit_inode_child+0x240/0x7bc
tracefs_create_file+0x1b8/0x2a0
trace_create_file+0x18/0x50
event_create_dir+0x204/0x30c
__trace_add_new_event+0xac/0x100
event_trace_add_tracer+0xa0/0x130
trace_array_create_dir+0x60/0x140
trace_array_create+0x1e0/0x370
instance_mkdir+0x90/0xd0
tracefs_syscall_mkdir+0x68/0xa0
vfs_mkdir+0x21c/0x34c
do_mkdirat+0x1b4/0x1d4
__arm64_sys_mkdirat+0x4c/0x60
el0_svc_common.constprop.0+0xa8/0x240
do_el0_svc+0x8c/0xc0
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb4
el0_sync+0x160/0x180
Therefore, we add cond_resched() to __audit_inode_child() to fix it.
Fixes: 5195d8e217 ("audit: dynamically allocate audit_names when not enough space is in the names array")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7075b0c91b ]
The HCHAN parameter should be the highest channel number, not the
channel count.
While we're at it, handle LCHAN with the dual __ffs helper.
Fixes: ccc2f0c1b6 ("ASoC: SOF: Intel: hda-mlink: add helper to program SoundWire PCMSyCM registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db07ce5da8 ]
The adreno_is_a20x() and adreno_is_a225() functions rely on the
GPU revision, but such information is retrieved inside adreno_gpu_init(),
which is called afterwards.
Fix this problem by caling adreno_gpu_init() earlier, so that
the GPU information revision is available when adreno_is_a20x()
and adreno_is_a225() run.
Tested on a imx53-qsb board.
Fixes: 21af872cd8 ("drm/msm/adreno: add a2xx")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543456/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ad49d37cf ]
There is a upper bound to "catlen" but no lower bound to prevent
negatives. I don't see that this necessarily causes a problem but we
may as well be safe.
Fixes: e114e47377 ("Smack: Simplified Mandatory Access Control Kernel")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d93cf453f5 ]
Since commit 1e7ac595fa ("drm/msm/dpu: pass irq to
dpu_encoder_helper_wait_for_irq()") the
dpu_encoder_phys_wb_wait_for_commit_done expects the IRQ index rather
than the IRQ index in phys_enc->intr table, however writeback got the
older invocation in place. This was unnoticed for several releases, but
now it's time to fix it.
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550924/
Link: https://lore.kernel.org/r/20230802100426.4184892-2-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2ed165619 ]
of_match_device() may fail and returns a NULL pointer.
Fix this by checking the return value of of_match_device.
Fixes: 8cde3c2153 ("firmware: meson_sm: Rework driver as a proper platform driver")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/tencent_AA08AAA6C4F34D53ADCE962E188A879B8206@qq.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd0ad3b236 ]
Apparently no one noticed that mdp5 plane states leak like a sieve
ever since we introduced plane_state->commit refcount a few years ago
in 21a01abbe3 ("drm/atomic: Fix freeing connector/plane state too
early by tracking commits, v3.")
Fix it by using the right helpers.
Fixes: 21a01abbe3 ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reported-and-tested-by: dorum@noisolation.com
Cc: dorum@noisolation.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/551236/
Link: https://lore.kernel.org/r/20230803204521.928582-1-daniel.vetter@ffwll.ch
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f908786cf ]
This patch fixes the following sparse error:
drivers/soc/qcom/smem.c:738:30: error: incompatible types in comparison expression (different add ress spaces):
drivers/soc/qcom/smem.c:738:30: void *
drivers/soc/qcom/smem.c:738:30: void [noderef] __iomem *
In addr_in_range(), "base" is of type void __iomem *, converting
void *addr to the same type to fix above sparse error.
Fixes: 20bb6c9de1 ("soc: qcom: smem: map only partitions used by local HOST")
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230801094807.4146779-1-chenjiahao16@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c9e45dfee ]
Even though currently there is no consumer for L1B, add the supply
for it anyway.
Fixes: 71342fb91e ("arm64: dts: qcom: Add base SM8550 MTP dts")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230801095246.2884770-1-abel.vesa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42d0d253ed ]
sm8550 has 16 vbif clients.
This fixes the extra 2 clients (DMA4/DMA5) not having their memtype
initialized. This fixes DMA4/DMA5 planes not displaying correctly.
Fixes: efcd010772 ("drm/msm/dpu: add support for SM8550")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Patchwork: https://patchwork.freedesktop.org/patch/550968/
Link: https://lore.kernel.org/r/20230802134900.30435-1-jonathan@marek.ca
[DB: fixed the Fixes tag]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 078f766e16 ]
The regdma is currently not used by the current driver. We have no way
to practically verify that the regdma is described correctly. Drop it
now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/533148/
Link: https://lore.kernel.org/r/20230420222558.1208887-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Stable-dep-of: 42d0d253ed ("drm/msm/dpu: increase memtype count to 16 for sm8550")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a675a8fa5 ]
The connector type and pixel format are missing for this panel,
add them to prevent various drivers from failing to determine
either of those parameters.
Fixes: 7ee933a1d5 ("drm/panel: simple: Add support for AUO T215HVN01")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709134914.449328-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fedf429e07 ]
As the temporary buffer is no longer used to store 8-bit grayscale data,
its size can be reduced to the size needed to store the monochrome
bitmap data.
Fixes: 24c6bedefb ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-6-geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f0d984053 ]
As ffs() returns one more than the index of the first bit set (zero
means no bits set), the color key mode value is shifted one position too
much.
Fix this by using FIELD_GET() instead.
Fixes: c96103b6c4 ("drm/armada: move colorkey properties into overlay plane state")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a4d779d954a7515ddbbf31cb0f0d8184c0e7c879.1689600265.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f81bb0ac78 ]
Aspeed always report the display port as "connected", because it
doesn't set a .detect_ctx callback.
Fix this by providing the proper detect callback for astdp and dp501.
This also fixes the following regression:
Since commit fae7d18640 ("drm/probe-helper: Default to 640x480 if no
EDID on DP") The default resolution is now 640x480 when no monitor is
connected. But Aspeed graphics is mostly used in servers, where no monitor
is attached. This also affects the remote BMC resolution to 640x480, which
is inconvenient, and breaks the anaconda installer.
v2: Add .detect callback to the dp/dp501 connector (Jani Nikula)
v3: Use .detect_ctx callback, and refactors (Thomas Zimmermann)
Add a BMC virtual connector
v4: Better indent detect_ctx() functions (Thomas Zimmermann)
v5: Enable polling of the dp and dp501 connector status
(Thomas Zimmermann)
v6: Change check order in ast_astdp_is_connected (Jammy Huang)
Fixes: fae7d18640 ("drm/probe-helper: Default to 640x480 if no EDID on DP")
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713134316.332502-2-jfalempe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9568d22ce ]
I2C6 and I2C7 use the same interrupts, which is incorrect.
In the downstream kernel, I2C7 has interrupts of 608 instead of 607.
Fixes: 81bee6953b ("arm64: dts: qcom: sm8150: add i2c nodes")
Signed-off-by: Zeyan Li <qaz6750@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/SY7P282MB378712225CBCEA95FE71554DB201A@SY7P282MB3787.AUSP282.PROD.OUTLOOK.COM
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6ce4f0ea1 ]
when kmalloc() fail to allocate memory in kasprintf(), name
or full_name will be NULL, strcmp() will cause
null pointer dereference.
Fixes: 0d638a07d3 ("of: Convert to using %pOF instead of full_name")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230727080246.519539-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 903705111d ]
Device core dump add block method adds hardware blocks to dumping queue
with stack behavior which causes the hardware blocks to be printed in
reverse order. Change the addition to dumping queue data structure
from "list_add" to "list_add_tail" for FIFO queue behavior.
Fixes: 98659487b8 ("drm/msm: add support to take dpu snapshot")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546200/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-1-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44abfa6a95 ]
Several reasons why 'reconfig_mutex' should be held:
1) rdev_for_each() is not safe to be called without the lock, because
rdev can be removed concurrently.
2) mddev_destroy_serial_pool() and mddev_create_serial_pool() should not
be called concurrently.
3) mddev_suspend() from mddev_destroy/create_serial_pool() should be
protected by the lock.
Fixes: 10c92fca63 ("md-bitmap: create and destroy wb_info_pool with the change of backlog")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230706083727.608914-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4d129640f ]
Local variable is definied first in the beginning of backlog_store(),
there is no need to define it again.
Fixes: 8c13ab115b ("md/bitmap: don't set max_write_behind if there is no write mostly device")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230706083727.608914-2-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 673643490b ]
Commit 2ae6aaf769 ("md/raid10: fix io loss while replacement replace
rdev") reads replacement first to prevent io loss. However, there are same
issue in wait_blocked_dev() and raid10_handle_discard(), too. Fix it by
using dereference_rdev_and_rrdev() to get devices.
Fixes: d30588b273 ("md/raid10: improve raid10 discard request")
Fixes: f2e7e269a7 ("md/raid10: pull the code that wait for blocked dev into one function")
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20230701080529.2684932-4-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b99f8fd2d9 ]
Factor out a helper to get 'rdev' and 'replacement' from config->mirrors.
Just to make code cleaner and prepare to fix the bug of io loss while
'replacement' replace 'rdev'.
There is no functional change.
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20230701080529.2684932-3-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: 673643490b ("md/raid10: use dereference_rdev_and_rrdev() to get devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e24ed04389 ]
memalloc_noio_save() is called for the first mddev_suspend(), and
repeated mddev_suspend() only increase 'suspended'. However,
memalloc_noio_restore() is also called for the first mddev_resume(),
which means that memory reclaim will be enabled before the last
mddev_resume() is called, while the array is still suspended.
Fix this problem by restore 'noio_flag' for the last mddev_resume().
Fixes: 78f57ef9d5 ("md: use memalloc scope APIs in mddev_suspend()/mddev_resume()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230628012931.88911-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5befe22b3e ]
Running sparse on fsl_qmc_audio (make C=1) raises the following warnings:
fsl_qmc_audio.c:387:26: warning: restricted snd_pcm_format_t degrades to integer
fsl_qmc_audio.c:389:59: warning: incorrect type in argument 1 (different base types)
fsl_qmc_audio.c:389:59: expected restricted snd_pcm_format_t [usertype] format
fsl_qmc_audio.c:389:59: got unsigned int [assigned] i
fsl_qmc_audio.c:564:26: warning: restricted snd_pcm_format_t degrades to integer
fsl_qmc_audio.c:569:50: warning: incorrect type in argument 1 (different base types)
fsl_qmc_audio.c:569:50: expected restricted snd_pcm_format_t [usertype] format
fsl_qmc_audio.c:569:50: got int [assigned] i
fsl_qmc_audio.c:573:62: warning: incorrect type in argument 1 (different base types)
fsl_qmc_audio.c:573:62: expected restricted snd_pcm_format_t [usertype] format
fsl_qmc_audio.c:573:62: got int [assigned] i
These warnings are due to snd_pcm_format_t values handling done in the
driver. Some macros and functions exist to handle safely these values.
Use dedicated macros and functions to remove these warnings.
Fixes: 075c7125b1 ("ASoC: fsl: Add support for QMC audio")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230726161620.495298-1-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bdfe84fbd ]
The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives.
Enable sata1 node to fix use of SATA drives on the M.2 slot.
Fixes: 2bf2f4d9f6 ("arm64: dts: rockchip: Add Radxa CM3I E25")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230724145213.3833099-1-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a87852e37f ]
Despite its name, the regulator vcc3v3_pcie30x1 has nothing to do with
pcie30x1. Instead, it supply power to VBAT1-5 on the M.2 KEY B port as
seen on page 8 of the schematic [1].
pcie30x1 is used for the mini PCIe slot, and as seen on page 9 the
vcc3v3_minipcie regulator is instead related to pcie30x1.
The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives.
Use correct regulator vcc3v3_minipcie for pcie30x1.
[1] https://dl.radxa.com/cm3p/e25/radxa-e25-v1.4-sch.pdf
Fixes: 2bf2f4d9f6 ("arm64: dts: rockchip: Add Radxa CM3I E25")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230724145213.3833099-1-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0cc8e1512 ]
Fixes the following:
WARNING: min() should probably be min_t(size_t, size, sizeof(ip))
+ ret = copy_to_user(out, &ip, min((size_t)size, sizeof(ip)));
And other style fixes:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Missing a blank line after declarations
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21fc24ee9c ]
According to bindings and Linux driver, there is no VDDA but VIO supply.
Fixes: 4ac46b3682 ("arm64: dts: qcom: msm8996: xiaomi-gemini: Add support for Xiaomi Mi 5")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230720115335.137354-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b6ea15c0a ]
GCC and it's GDSCs are under the RPMh CX power domain. So let's add the
missing RPMh power domain to the GCC node.
Fixes: 6d4cf750d0 ("arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230720054100.9940-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44ad820780 ]
Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that
use a non-default design. They don't include switch but have a single
Ethernet port and BCM54210E PHY connected to the Ethernet controller's
MDIO bus.
Support for those devices regressed due to two changes:
1. Describing MDIO bus with switch
After commit 9fb90ae6ca ("ARM: dts: BCM53573: Describe on-SoC BCM53125
rev 4 switch") Linux stopped probing for MDIO devices.
2. Dropping hardcoded BCM54210E delays
In commit fea7fda7f5 ("net: phy: broadcom: Fix RGMII delays
configuration for BCM54210E") support for other PHY modes was added but
that requires a proper "phy-mode" value in DT.
Both above changes are correct (they don't need to be reverted or
anything) but they need this fix for DT data to be correct and for Linux
to work properly.
Fixes: 9fb90ae6ca ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230713111145.14864-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d281eeaa4d ]
For ADV7533 and ADV7535 low refresh rate is selected using
bits [3:2] of 0x4a main register.
So depending on ADV model write 0xfb or 0x4a register.
Fixes: 2437e7cd88 ("drm/bridge: adv7533: Initial support for ADV7533")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719060143.63649-1-alex@shruggie.ro
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b77904ba17 ]
Backlight is supplied by DC5V regulator. The DTS has no PMIC node, so
just add a regulator-fixed to solve it and fix dtbs_check warning:
s5pv210-smdkv210.dtb: backlight: 'power-supply' is a required property
Link: https://lore.kernel.org/r/20230421095721.31857-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Stable-dep-of: 982655cb0e ("ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41639b3a8b ]
The DRM DP code has macros for the DP HDCP capabilities. Use them in the
anx7625 driver instead of raw numbers.
Fixes: cd1637c7e4 ("drm/bridge: anx7625: add HDCP support")
Suggested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710091203.1874317-1-wenst@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ba776f903 ]
The DRM DP code has macros for the DP power sequencing commands. Use
them in the anx7625 driver instead of raw numbers.
Fixes: 548b512e14 ("drm/bridge: anx7625: send DPCD command to downstream")
Fixes: 27f26359de ("drm/bridge: anx7625: Set downstream sink into normal status")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710090929.1873646-1-wenst@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 548cb93205 ]
Visible glitches have been observed when running graphics applications on
Linux under Xen hypervisor. Those observations have been confirmed with
failures from kms_pwrite_crc Intel GPU test that verifies data coherency
of DRM frame buffer objects using hardware CRC checksums calculated by
display controllers, exposed to userspace via debugfs. Affected
processing paths have then been identified with new IGT test variants that
mmap the objects using different methods and caching modes [1].
When running as a Xen PV guest, Linux uses Xen provided PAT configuration
which is different from its native one. In particular, Xen specific PTE
encoding of write-combining caching, likely used by graphics applications,
differs from the Linux default one found among statically defined minimal
set of supported modes. Since Xen defines PTE encoding of the WC mode as
_PAGE_PAT, it no longer belongs to the minimal set, depends on correct
handling of _PAGE_PAT bit, and can be mismatched with write-back caching.
When a user calls mmap() for a DRM buffer object, DRM device specific
.mmap file operation, called from mmap_region(), takes care of setting PTE
encoding bits in a vm_page_prot field of an associated virtual memory area
structure. Unfortunately, _PAGE_PAT bit is not preserved when the vma's
.vm_flags are then applied to .vm_page_prot via vm_set_page_prot(). Bits
to be preserved are determined with _PAGE_CHG_MASK symbol that doesn't
cover _PAGE_PAT. As a consequence, WB caching is requested instead of WC
when running under Xen (also, WP is silently changed to WT, and UC
downgraded to UC_MINUS). When running on bare metal, WC is not affected,
but WP and WT extra modes are unintentionally replaced with WC and UC,
respectively.
WP and WT modes, encoded with _PAGE_PAT bit set, were introduced by commit
281d4078be ("x86: Make page cache mode a real type"). Care was taken
to extend _PAGE_CACHE_MASK symbol with that additional bit, but that
symbol has never been used for identification of bits preserved when
applying page protection flags. Support for all cache modes under Xen,
including the problematic WC mode, was then introduced by commit
47591df505 ("xen: Support Xen pv-domains using PAT").
The issue needs to be fixed by including _PAGE_PAT bit into a bitmask used
by pgprot_modify() for selecting bits to be preserved. We can do that
either internally to pgprot_modify() (as initially proposed), or by making
_PAGE_PAT a part of _PAGE_CHG_MASK. If we go for the latter then, since
_PAGE_PAT is the same as _PAGE_PSE, we need to note that _HPAGE_CHG_MASK
-- a huge pmds' counterpart of _PAGE_CHG_MASK, introduced by commit
c489f1257b ("thp: add pmd_modify"), defined as (_PAGE_CHG_MASK |
_PAGE_PSE) -- will no longer differ from _PAGE_CHG_MASK. If such
modification of _PAGE_CHG_MASK was irrelevant to its users then one might
wonder why that new _HPAGE_CHG_MASK symbol was introduced instead of
reusing the existing one with that otherwise irrelevant bit (_PAGE_PSE in
that case) added.
Add _PAGE_PAT to _PAGE_CHG_MASK and _PAGE_PAT_LARGE to _HPAGE_CHG_MASK for
symmetry. Split out common bits from both symbols to a common symbol for
clarity.
[ dhansen: tweak the solution changelog description ]
[1] 0f0754413f
Fixes: 281d4078be ("x86: Make page cache mode a real type")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7648
Link: https://lore.kernel.org/all/20230710073613.8006-2-janusz.krzysztofik%40linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43c9835b14 ]
Currently the write_cache attribute allows enabling the QUEUE_FLAG_WC
flag on devices that never claimed the capability.
Fix that by adding a QUEUE_FLAG_HW_WC flag that is set by
blk_queue_write_cache and guards re-enabling the cache through sysfs.
Note that any rescan that calls blk_queue_write_cache will still
re-enable the write cache as in the current code.
Fixes: 93e9d8e836 ("block: add ability to flag write back caching on a device")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230707094239.107968-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4e21bcd0f ]
Get rid of the local queue_wc_store variable and handling setting and
clearing the QUEUE_FLAG_WC flag diretly instead the if / else if.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230707094239.107968-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 43c9835b14 ("block: don't allow enabling a cache on devices that don't support it")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20faf2005e ]
gpu->mmu_context is the MMU context of the last job in the HW queue, which
isn't necessarily the same as the context from the bad job. Dump the MMU
context from the scheduler determined bad submit to make it work as intended.
Fixes: 17e4660ae3 ("drm/etnaviv: implement per-process address spaces on MMUv2")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
