A series of changes to configure IPU and DSP remoteproc for omap4 & 5.
And a change to configure the default mux for am335x-pocketbeagle, and
a change to use https for external links.
-----BEGIN PGP SIGNATURE-----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=IlyP
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.9/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
More dts changes for omaps for v5.9
A series of changes to configure IPU and DSP remoteproc for omap4 & 5.
And a change to configure the default mux for am335x-pocketbeagle, and
a change to use https for external links.
* tag 'omap-for-v5.9/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
Replace HTTP links with HTTPS ones: OMAP DEVICE TREE SUPPORT
ARM: dts: omap5-uevm: Add watchdog timers for IPU and DSP
ARM: dts: omap4-panda-common: Add watchdog timers for IPU and DSP
ARM: dts: omap5-uevm: Add system timers to DSP and IPU
ARM: dts: omap5-uevm: Add CMA pools and enable IPU & DSP
ARM: dts: omap5: Add aliases for rproc nodes
ARM: dts: omap5: Add DSP and IPU nodes
ARM: dts: omap4-panda-common:: Add system timers to DSP and IPU
ARM: dts: omap4-panda-common: Add CMA pools and enable IPU & DSP
ARM: dts: omap4: Add aliases for rproc nodes
ARM: dts: omap4: Add IPU DT node
ARM: dts: omap4: Update the DSP node
ARM: dts: omap5: Add timer_sys_ck clocks for timers
ARM: dts: omap4: Add timer_sys_ck clocks for timers
ARM: dts: am335x-pocketbeagle: set default mux for gpio pins
Link: https://lore.kernel.org/r/pull-1594838111-649880@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A series of changes to drop remaining USB platform data for omap4/5,
and am4, and dra7.
And a patch to drop AES platform data for omap3.
-----BEGIN PGP SIGNATURE-----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=4iOb
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.9/ti-sysc-drop-pdata-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Drop more legacy platform data for omaps for v5.9
A series of changes to drop remaining USB platform data for omap4/5,
and am4, and dra7.
And a patch to drop AES platform data for omap3.
* tag 'omap-for-v5.9/ti-sysc-drop-pdata-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Drop legacy platform data for omap5 usb host
ARM: OMAP2+: Drop legacy platform data for omap4 usb
ARM: OMAP2+: Drop legacy platform data for dra7 dwc3
ARM: OMAP2+: Drop legacy platform data for omap5 dwc3
ARM: OMAP2+: Drop legacy platform data for am4 dwc3
bus: ti-sysc: Add missing quirk flags for usb_host_hs
ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2
Link: https://lore.kernel.org/r/pull-1594838111-649880@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The watchdog timers have been added for the IPU and DSP remoteproc
devices for the OMAP5 uEVM board. The following timers (same as the
timers on OMAP4 Panda boards) are used as the watchdog timers,
DSP : GPT6
IPU : GPT9 & GPT11 (one for each Cortex-M4 core)
The MPU-side drivers will use this data to initialize the watchdog
timers, and listen for any watchdog triggers. The BIOS-side code
needs to configure and refresh these timers properly to not throw
a watchdog error.
These timers can be changed or removed as per the system integration
needs, alongside appropriate equivalent changes on the firmware side.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The watchdog timers have been added for the IPU and DSP remoteproc
devices on all the OMAP4-based Panda boards. The following timers
are used as the watchdog timers,
DSP : GPT6
IPU : GPT9 & GPT11 (one for each Cortex-M3 core)
The MPU-side drivers will use this data to initialize the watchdog
timers, and listen for any watchdog triggers. The BIOS-side code
needs to configure and refresh these timers properly to not throw
a watchdog error.
These timers can be changed or removed as per the system integration
needs, alongside appropriate equivalent changes on the firmware side.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The BIOS System Tick timers have been added for the IPU and DSP
remoteproc devices for the OMAP5 uEVM boards. The following timers
(same as the timers on OMAP4 Panda boards) are chosen:
IPU : GPT3 (SMP-mode)
DSP : GPT5
IPU has two Cortex-M4 processors, and is currently expected to be
running in SMP-mode, so only a single timer suffices to provide
the BIOS tick timer. An additional timer should be added for the
second processor in IPU if it were to be run in non-SMP mode. The
timer value also needs to be unique from the ones used by other
processors so that they can be run simultaneously.
The timers are optional, but are mandatory to support device
management features such as power management and watchdog support.
The above are added to successfully boot and execute firmware images
configured with the respective timers, images that use internal
processor subsystem timers are not affected. The timers can be
changed or removed as per the system integration needs, alongside
equivalent changes on the firmware side.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The CMA reserved memory nodes have been added for the IPU and DSP
remoteproc devices on the OMAP5 uEVM board. These nodes are assigned
to the respective rproc device nodes, and both the IPU and DSP remote
processors are enabled for this board.
The current CMA pools and sizes are defined statically for each device.
The starting addresses are fixed to meet current dependencies on the
remote processor firmwares, and will go away when the remote-side
code has been improved to gather this information runtime during
its initialization.
An associated pair of the rproc node and its CMA node can be disabled
later on if there is no use-case defined to use that remote processor.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add aliases for the DSP and IPU remoteproc processor
nodes common to all OMAP5 boards. The aliases uses
the stem "rproc", and are identical to the values
chosen on OMAP4 boards.
The aliases can be overridden, if needed, in the
respective board files.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
OMAP5, like OMAP4, also has two remote processor subsystems,
DSP and IPU. The IPU subsystem though has dual Cortex-M4
processors instead of the dual Cortex-M3 processors in OMAP4,
but otherwise has almost the same set of features. Add the
DT nodes for these two processor sub-systems for all OMAP5
SoCs.
The nodes have the 'iommus', 'clocks', 'resets', 'firmware' and
'mboxes' properties added, and are disabled for now. The IPU node
has its L2 RAM memory specified through the 'reg' and 'reg-names'
properties. The DSP node doesn't have these since it doesn't have
any L2 RAM memories, but has an additional 'ti,bootreg' property
instead as it has a specific boot register that needs to be
programmed for booting.
These nodes should be enabled as per the individual product
configuration in the corresponding board dts files.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The BIOS System Tick timers have been added for the IPU and DSP
remoteproc devices on all the OMAP4-based Panda boards. The
following DMTimers are chosen:
IPU : GPT3 (SMP-mode)
DSP : GPT5
IPU has two Cortex-M3 processors, and is currently expected to be
running in SMP-mode, so only a single timer suffices to provide
the BIOS tick timer. An additional timer should be added for the
second processor in IPU if it were to be run in non-SMP mode. The
timer value also needs to be unique from the ones used by other
processors so that they can be run simultaneously.
The timers are optional, but are mandatory to support device
management features such as power management and watchdog support.
The above are added to successfully boot and execute firmware images
configured with the respective timers, images that use internal
processor subsystem timers are not affected. The timers can be
changed or removed as per the system integration needs, alongside
equivalent changes on the firmware side.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The CMA reserved memory nodes have been added for the IPU and DSP
remoteproc devices on all the OMAP4-based Panda boards. These nodes
are assigned to the respective rproc device nodes, and both the
IPU and DSP remote processors are enabled for all these boards.
The current CMA pools and sizes are defined statically for each device.
The starting addresses are fixed to meet current dependencies on the
remote processor firmwares, and will go away when the remote-side
code has been improved to gather this information runtime during
its initialization.
An associated pair of the rproc node and its CMA node can be disabled
later on if there is no use-case defined to use that remote processor.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add aliases for the DSP and IPU remoteproc processor
nodes common to all OMAP4 boards. The aliases uses
the stem "rproc".
The aliases can be overridden, if needed, in the
respective board files.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The DT node for the Dual-Cortex M3 IPU processor sub-system has
been added for OMAP4 SoCs. The L2RAM memory region information
has been added to the node through the 'reg' and 'reg-names'
properties. The node has the 'iommus', 'clocks', 'resets',
'mboxes' and 'firmware' properties also added, and is disabled
for now. It should be enabled as per the individual product
configuration in the corresponding board dts files.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The compatible property for the DSP node is updated to match
the OMAP remoteproc bindings. The node is moved from the soc
node to the ocp node to better reflect the connectivity from
MPU side.
The node is updated with the 'ti,bootreg', 'clocks', 'resets',
'iommus', 'mboxes' and 'firmware' properties. Note that the
node does not have any 'reg' or 'reg-names' properties since
it doesn't have any L2 RAM memory, but only Unicaches.
The node is disabled for now, and should be enabled as per
the individual product configuration in the corresponding
board dts files.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The commit d41e530409 ("clk: ti: omap5: cleanup unnecessary clock
aliases") has cleaned up all timer_sys_ck clock aliases and retained
only the timer_32k_ck clock alias. The OMAP clocksource timer driver
though still uses this clock alias when reconfiguring the parent
clock source for the timer functional clocks, so add these clocks
to all the timer nodes except for the always-on timers 1 and 12.
This is required by the OMAP remoteproc driver to successfully
acquire a timer and configure the source clock to be driven from
timer_sys_ck clock.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The commit 1c7de9f27a ("clk: ti: omap4: cleanup unnecessary clock
aliases") has cleaned up all timer_sys_ck clock aliases and retained
only the timer_32k_ck clock alias. The OMAP clocksource timer driver
though still uses this clock alias when reconfiguring the parent
clock source for the timer functional clocks, so add these clocks
to all the timer nodes.
This is required by the OMAP remoteproc driver to successfully
acquire a timer and configure the source clock to be driven from
timer_sys_ck clock.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
These pins on the PocketBeagle P1 and P2 headers are connected to AM3358
balls with gpio lines, and these pins are not used for any other
peripherals by default. These GPIO lines are unclaimed and could be used
by userspace program through the gpiod ABI.
This patch adds a "default" state in the am33xx_pinmux node and sets the
mux for those pins to gpio (mode 7) and input enable.
The "pinctrl-single,bias-pullup" and "pinctrl-single,bias-pulldown"
pinconf properties are also set for each pin per the ball reset state in
section 4.2 of the datasheet [0].
This is the AM335x pin control register format in Table 9-60 [1]:
bit attribute value
----------------------------------
31-7 reserved 0 on reset
6 slew { 0: fast, 1: slow }
5 rx_active { 0: rx disable, 1: rx enabled }
4 pu_typesel { 0: pulldown select, 1: pullup select }
3 puden { 0: pud enable, 1: disabled }
2 mode 3 bits to selec mode 0 to 7
1 mode
0 mode
The values for the bias pinconf properties are derived as follows:
pinctrl-single,bias-pullup = <[input] [enabled] [disable] [mask]>;
pinctrl-single,bias-pullup = < 0x10 0x10 0x10 0x18 >;
2^5 2^4 2^3 2^2 2^1 2^0 |
0x20 0x10 0x08 0x04 0x02 0x01 |
--------------------------------------------------|
input x 1 0 x x x | 0x10
enabled x 1 0 x x x | 0x10
disabled x 0 0 x x x | 0x00
mask x 1 1 x x x | 0x18
pinctrl-single,bias-pulldown = <[input] [enabled] [disable] [mask]>;
pinctrl-single,bias-pulldown = < 0x0 0x0 0x10 0x18 >;
2^5 2^4 2^3 2^2 2^1 2^0 |
0x20 0x10 0x08 0x04 0x02 0x01 |
--------------------------------------------------|
input x 0 0 x x x | 0x00
enabled x 0 0 x x x | 0x00
disabled x 1 0 x x x | 0x10
mask x 1 1 x x x | 0x18
[0] http://www.ti.com/lit/ds/symlink/am3358.pdf
[1] https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
[tony@atomide.com: fixed typo for am3 vs am4]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Similar to what we have for the legacy platform data, we need to
configure SWSUP_SIDLE and SWSUP_MSTANDBY quirks for usb_host_hs.
These are needed to drop the legacy platform data for usb_host_hs.
Signed-off-by: Tony Lindgren <tony@atomide.com>
for 5.9 please pull the following:
- Rafal specifies the switch ports for various Luxul devices (XAP-1410,
XAP-1510, XAP-1610, XWC-1000, XWC-2000, XWR-1200, XWR-3100, XWR-3150)
- Krzysztof fixes the L2 cache controller node name to conform to
dtschema
- Maxime introduces two new clock providers for Raspberry Pi 4, one to
support firmware based clocks and another one for the DVP block
feeding into the two HDMI blocks.
-----BEGIN PGP SIGNATURE-----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=/iqx
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.9/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.9 please pull the following:
- Rafal specifies the switch ports for various Luxul devices (XAP-1410,
XAP-1510, XAP-1610, XWC-1000, XWC-2000, XWR-1200, XWR-3100, XWR-3150)
- Krzysztof fixes the L2 cache controller node name to conform to
dtschema
- Maxime introduces two new clock providers for Raspberry Pi 4, one to
support firmware based clocks and another one for the DVP block
feeding into the two HDMI blocks.
* tag 'arm-soc/for-5.9/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm: Align L2 cache-controller nodename with dtschema
ARM: dts: BCM5301X: Specify switch ports for Luxul devices
ARM: dts: bcm2711: Add HDMI DVP
ARM: dts: bcm2711: Add firmware clocks node
Link: https://lore.kernel.org/r/20200707045759.17562-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This series of changes configures the GPIO line names for am335x beaglebone
black and pocketbeagle to make it easier to configure the pins. To make use
of the pins, we also add the gpio-ranges for am335x.
We also enable IPU and DSP repmoteproc for am5729-beaglebone-ai, and then
there are two non-urgent dtschema validator warning fixes.
-----BEGIN PGP SIGNATURE-----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=OvXQ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.9/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Device tree changes for omaps for v5.9 merge window
This series of changes configures the GPIO line names for am335x beaglebone
black and pocketbeagle to make it easier to configure the pins. To make use
of the pins, we also add the gpio-ranges for am335x.
We also enable IPU and DSP repmoteproc for am5729-beaglebone-ai, and then
there are two non-urgent dtschema validator warning fixes.
* tag 'omap-for-v5.9/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-pocketbeagle: add gpio-line-names
ARM: dts: am335x-boneblack: add gpio-line-names
ARM: dts: am33xx-l4: add gpio-ranges
ARM: dts: am5729-beaglebone-ai: Disable ununsed mailboxes
ARM: dts: am5729-beaglebone-ai: Enable IPU & DSP rprocs
ARM: dts: am: Align L2 cache-controller nodename with dtschema
ARM: dts: omap: Align L2 cache-controller nodename with dtschema
Link: https://lore.kernel.org/r/pull-1594402929-762188@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add missing interrupts property to support card serial
- fix node names to follow the DT schema
- add clock-names and reset-names to pcie-phy
-----BEGIN PGP SIGNATURE-----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=1kpa
-----END PGP SIGNATURE-----
Merge tag 'uniphier-dt64-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt
UniPhier ARM64 SoC DT updates for v5.9
- add missing interrupts property to support card serial
- fix node names to follow the DT schema
- add clock-names and reset-names to pcie-phy
* tag 'uniphier-dt64-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: Add missing clock-names and reset-names to pcie-phy
arm64: dts: uniphier: Rename ethphy node to ethernet-phy
arm64: dts: uniphier: give fixed port number to support card serial
arm64: dts: uniphier: add interrupts to support card serial
Link: https://lore.kernel.org/r/CAK7LNARK4SKhSW-xwgc3vq7FO7N864jPgzm8NtsGOv8wVFVyBQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add missing interrupts property to support card serial
- fix node names to follow the DT schema
- add PCIe endpoint and PHY nodes for Pro5 SoC
- simplify device hierarchy of support-card.dtsi
-----BEGIN PGP SIGNATURE-----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=d0+s
-----END PGP SIGNATURE-----
Merge tag 'uniphier-dt-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt
UniPhier ARM SoC DT updates for v5.9
- add missing interrupts property to support card serial
- fix node names to follow the DT schema
- add PCIe endpoint and PHY nodes for Pro5 SoC
- simplify device hierarchy of support-card.dtsi
* tag 'uniphier-dt-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
ARM: dts: uniphier: simplify support-card node structure
ARM: dts: uniphier: Add PCIe endpoint and PHY node for Pro5
ARM: dts: uniphier: Rename ethphy node to ethernet-phy
ARM: dts: uniphier: give fixed port number to support card serial
ARM: dts: uniphier: rename support card serial node to fix schema warning
ARM: dts: uniphier: add interrupts to support card serial
Link: https://lore.kernel.org/r/CAK7LNARGDcCKxV3-H7WmuZAVe49n0QF+672-KN0tsP0och0a_A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Also known as the Lenovo IdeaPad Duet Chromebook.
There are different krane boards with shared resources, hence a
mt8183-kukui-krane.dtsi was created for easily introduce future new
boards. The same happens with the baseboard codenamed kukui where
different variants, apart from kukui variant can take advantage of the
shared resources.
Signed-off-by: Ben Ho <Ben.Ho@mediatek.com>
[originally created by Ben Ho but adapted and ported to mainline]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200625101757.101775-8-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add the USB3.0 phyter and controller for the MediaTek's MT8183 SoC.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200625101757.101775-7-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Remove the unit address from the DT nodes that doesn't have a reg
property. This fixes the following unit name warnings:
Warning (unit_address_vs_reg): /soc/pinctrl@10005000/mmc0@0: node has a unit name, but no reg or ranges property
Warning (unit_address_vs_reg): /soc/pinctrl@10005000/mmc1@0: node has a unit name, but no reg or ranges property
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200625101757.101775-6-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Remove the unit address from the DT nodes that doesn't have a reg
property. This fixes the following unit name warnings:
Warning (unit_address_vs_reg): /cpus/idle-states/cluster-sleep@0: node has a unit name, but no reg or ranges property
Warning (unit_address_vs_reg): /cpus/idle-states/cluster-sleep@1: node has a unit name, but no reg or ranges property
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200625101757.101775-5-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The MediaTek's peripheral configuration controller is present on the
MT8183 SoC. Add the node for that controller.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200625101757.101775-4-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The regulators are expected to be instantiated with matching the
device-tree compatible, so add the proper compatible name under the
regulators node.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200625101757.101775-3-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The krane-sku176 is the Lenovo IdeaPad Duet Chromebook. A 2-in-1
detachable device using the MediaTek MT8183 SoC.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200625101757.101775-2-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Re measure capacity-dmips-mhz on elm and hana:
cpu 1: 9502 DMIPS @ 1703 Mhz
cpu 3: 16250 DMIPS @ 2106 Mhz
==> 740 : 1024
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200706083705.2343150-1-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This device hierarchy is needlessly complex.
Remove the support-card node level, and move the ethernet and serial
nodes right under the system-bus node.
This also fixes the following warning from 'make ARCH=arm dtbs_check':
support-card@1,1f00000: $nodename:0: 'support-card@1,1f00000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This adds missing clock-names and reset-names to pcie-phy node according to
Documentation/devicetree/bindings/phy/socionext,uniphier-pcie.yaml.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This renames the node name "ethphy" to "ethernet-phy" according to
Documentation/devicetree/bindings/net/mdio.yaml.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This adds PCIe endpoint controller and PHY nodes for Pro5 SoC,
and also adds pinctrl node for PCIe.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This renames the node name "ethphy" to "ethernet-phy" according to
Documentation/devicetree/bindings/net/mdio.yaml.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit e69f5dc623 ("dt-bindings: serial: Convert 8250 to
json-schema"), the schema for "ns16550a" is checked.
Since then, 'make ARCH=arm64 dtbs_check' is so noisy because the
required property 'interrupts' is missing.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit e69f5dc623 ("dt-bindings: serial: Convert 8250 to
json-schema"), the schema for "ns16550a" is checked.
'make ARCH=arm dtbs_check' emits the following warning:
uart@b0000: $nodename:0: 'uart@b0000' does not match '^serial(@[0-9a-f,]+)*$'
Rename the node to follow the pattern defined in
Documentation/devicetree/bindings/serial/serial.yaml
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit e69f5dc623 ("dt-bindings: serial: Convert 8250 to
json-schema"), the schema for "ns16550a" is checked.
Since then, 'make ARCH=arm dtbs_check' is so noisy because the
required property 'interrupts' is missing.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- The first one based on the enhancements made to clk-raspberrypi, which
is now registered trough DT and provides control over the whole range
of firmware based clocks.
- The second one based on the new clk-bcm2711-dvp driver, which gates
the clocks and reset signals that feed into RPi4's HDMI0/1 blocks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEErOkkGDHCg2EbPcGjlfZmHno8x/4FAl8DWigACgkQlfZmHno8
x/7FcggAhmCkN1I5zf7j3qDFNjIgg2sGl3JVmCasBdT8BK0yx7+5tcT3SHu9mOM0
o+8CngXUV+Tnl7LRIR0SJHtuiQkbh1MW9BAQMGrAMk+HDIzH957ki70kAp6kbLPE
EfQIrp0XCH6TXF0tpDbwpcJNQS3zpBC8cn8XgKnhVJbSnMHznP4a7iM6StvdRAov
umz65w/5QPMddvUFUVzGY1/+NVaEdqyE59xQQeoh0sbniMKuq9AlXF08kLWuyZgX
O3EJcuVgGjxS2gsVtgda74d+54fl1slkRV+T3YxYOtqe2kJcxLJx7gO4wfoM5OaC
4l2Hs3sRARSL005rUndoSMP/6uHmnw==
=+pUx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aAlp
-----END PGP SIGNATURE-----
Merge tag 'tags/bcm2835-dt-next-2020-07-06' into devicetree/next
Maxime Ripard introduces two new clock providers into RPi4's device tree:
- The first one based on the enhancements made to clk-raspberrypi, which
is now registered trough DT and provides control over the whole range
of firmware based clocks.
- The second one based on the new clk-bcm2711-dvp driver, which gates
the clocks and reset signals that feed into RPi4's HDMI0/1 blocks.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fix dtschema validator warnings like:
l2-cache@22000: $nodename:0:
'l2-cache@22000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
All those devices use standard BCM53011 (rev 5) or BCM53012 (rev 0).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
