Refactor __ext4_block_zero_page_range() by separating the block zeroing
operations for ordered data mode and journal data mode into two distinct
functions:
- ext4_block_do_zero_range(): handles non-journal data mode with
ordered data support
- ext4_block_journalled_zero_range(): handles journal data mode
Also extract a common helper, ext4_load_tail_bh(), to handle buffer head
and folio retrieval, along with the associated error handling. This
prepares for converting the partial block zero range to the iomap
infrastructure.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260327102939.1095257-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename ext4_block_truncate_page() to ext4_block_zero_eof() and extend
its signature to accept an explicit 'end' offset instead of calculating
the block boundary. This helper function now can replace all cases
requiring zeroing of the partial EOF block, including the append
buffered write paths in ext4_*_write_end().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260327102939.1095257-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a bool *did_zero output parameter to ext4_block_zero_page_range()
and __ext4_block_zero_page_range(). The parameter reports whether a
partial block was zeroed out, which is needed for the upcoming iomap
buffered I/O conversion.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260327102939.1095257-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The formats for non-terminated names should be "%.*s" not "%*.s".
The kernel currently treats "%*.s" as equivalent to "%*s" whereas
userspace requires it be equivalent to "%*.0s".
Neither is correct here.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20260326201804.3881-1-david.laight.linux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
__ext4_link() has two callers.
- ext4_link() calls it during normal handling of the link() system
call or similar
- ext4_fc_replay_link_internal() calls it when replaying the journal
at mount time.
The former needs changes to dcache - instantiating the dentry to the
inode on success. The latter doesn't need or want any dcache
manipulation.
So move the manipulation out of __ext4_link() and do it in ext4_link()
only.
This requires:
- passing the qname from the dentry explicitly to __ext4_link.
The parent dir is already passed. The dentry is still passed
in the ext4_link() case purely for use by ext4_fc_track_link().
- passing the inode separately to ext4_fc_track_link() as the
dentry will not be instantiated yet.
- using __ext4_add_entry() in ext4_link, which doesn't need a dentry.
- moving ihold(), d_instantiate(), drop_nlink() and iput() calls out
of __ext4_link() into ext4_link().
Note that ext4_inc_count() and drop_nlink() remain in __ext4_link()
as both callers need them and they are not related to the dentry.
This substantially simplifies ext4_fc_replay_link_internal(), and
removes a use of d_alloc() which, it is planned, will be removed.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20260320000838.3797494-4-neilb@ownmail.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Testing EXT4_MF_FC_INELIGIBLE is almost always combined with testing
ext4_fc_disabled(). The code can be simplified by combining these two
in a new ext4_fc_eligible().
In ext4_fc_track_inode() this moves the ext4_fc_disabled() test after
ext4_fc_mark_ineligible(), but as that is a non-op when
ext4_fc_disabled() is true, this is no no consequence.
Note that it is important to still call ext4_fc_mark_ineligible() in
ext4_fc_track_inode() even when ext4_fc_eligible() would return true.
ext4_fc_mark_ineligible() does not ONLY set the "INELIGIBLE" flag but
also updates ->s_fc_ineligible_tid to make sure that the flag remains
set until all ineligible transactions have been committed.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20260320000838.3797494-3-neilb@ownmail.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
__ext4_add_entry() is not given a dentry - just inodes and name.
This will help the next patch which simplifies __ex4_link().
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20260320000838.3797494-2-neilb@ownmail.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2_inode fields are updated under journal->j_list_lock, but some paths
read them without holding the lock (e.g. fast commit helpers and ordered
truncate helpers).
READ_ONCE() alone is not sufficient for the dirty range fields when they
are stored as loff_t because 32-bit platforms can observe torn loads.
Store the dirty range in PAGE_SIZE units as pgoff_t instead.
Represent the dirty range end as an exclusive end page. This avoids a
special sentinel value and keeps MAX_LFS_FILESIZE on 32-bit representable.
Publish a new dirty range by updating end_page before start_page, and
treat start_page >= end_page as empty in the accessor for robustness.
Use READ_ONCE() on the read side and WRITE_ONCE() on the write side for the
dirty range and i_flags to match the existing lockless access pattern.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260306085643.465275-5-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ocfs2 journal commit callback reads jbd2_inode dirty range fields without
holding journal->j_list_lock.
Use jbd2_jinode_get_dirty_range() to get the range in bytes.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260306085643.465275-4-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 journal commit callbacks access jbd2_inode dirty range fields without
holding journal->j_list_lock.
Use jbd2_jinode_get_dirty_range() to get the range in bytes, and read
i_transaction with READ_ONCE() in the redirty check.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260306085643.465275-3-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Provide a helper to fetch jinode dirty ranges in bytes. This lets
filesystem callbacks avoid depending on the internal representation,
preparing for a later conversion to page units.
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260306085643.465275-2-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Auditing the jbd2 codebase reveals several legacy J_ASSERT calls
that enforce internal state machine invariants (e.g., verifying
jh->b_transaction or jh->b_next_transaction pointers).
When these invariants are broken, the journal is in a corrupted
state. However, triggering a fatal panic brings down the entire
system for a localized filesystem error.
This patch targets a specific class of these asserts: those
residing inside functions that natively return integer error codes,
booleans, or error pointers. It replaces the hard J_ASSERTs with
WARN_ON_ONCE to capture the offending stack trace, safely drops
any held locks, gracefully aborts the journal, and returns -EINVAL.
This prevents a catastrophic kernel panic while ensuring the
corrupted journal state is safely contained and upstream callers
(like ext4 or ocfs2) can gracefully handle the aborted handle.
Functions modified in fs/jbd2/transaction.c:
- jbd2__journal_start()
- do_get_write_access()
- jbd2_journal_dirty_metadata()
- jbd2_journal_forget()
- jbd2_journal_try_to_free_buffers()
- jbd2_journal_file_inode()
Signed-off-by: Milos Nikic <nikic.milos@gmail.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20260304172016.23525-3-nikic.milos@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In jbd2_journal_get_create_access(), if the caller passes an unlocked
buffer, the code currently triggers a fatal J_ASSERT.
While an unlocked buffer here is a clear API violation and a bug in the
caller, crashing the entire system is an overly severe response. It brings
down the whole machine for a localized filesystem inconsistency.
Replace the J_ASSERT with a WARN_ON_ONCE to capture the offending caller's
stack trace, and return an error (-EINVAL). This allows the journal to
gracefully abort the transaction, protecting data integrity without
causing a kernel panic.
Signed-off-by: Milos Nikic <nikic.milos@gmail.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20260304172016.23525-2-nikic.milos@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The if-else ladder in ext4_mb_normalize_request() manually rounds up
the preallocation size to the next power of two for files up to 1MB,
enumerating each step from 16KB to 1MB individually. Replace this with
a single roundup_pow_of_two() call clamped to a 16KB minimum, which
is functionally equivalent but much more concise.
Also replace raw byte constants with SZ_1M and SZ_16K from
<linux/sizes.h> for clarity, and remove the stale "XXX: should this
table be tunable?" comment that has been there since the original
mballoc code.
No functional change.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Weixie Cui <cuiweixie@gmail.com>
Link: https://patch.msgid.link/tencent_E9C5F1B2E9939B3037501FD04A7E9CF0C407@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A series of patches such as commit 60a70e6143 ("mm: Use
folio_next_pos()") replace folio_pos() + folio_size() by
folio_next_pos(). The former performs x << z + y << z while
the latter performs (x + y) << z, which is slightly more
efficient. This case was not taken into account, perhaps
because the argument is not named folio.
The change was performed using the following Coccinelle
semantic patch:
@@
expression folio;
@@
- folio_pos(folio) + folio_size(folio)
+ folio_next_pos(folio)
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260222125049.1309075-1-Julia.Lawall@inria.fr
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since commit a7ba36bc94 ("ext4: fix fast commit alignment issues"),
both ext4_fc_replay_add_range and ext4_fc_replay_del_range get
ex based on 'val' instead of 'tl'.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260121063805.19863-1-guoqing.jiang@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
i_fc_wait is only initialized in ext4_fc_init_inode() and never used for
waiting or wakeups. Drop it.
Signed-off-by: Li Chen <me@linux.beauty>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260120121941.144192-1-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When delayed block allocation fails (e.g., due to filesystem corruption
detected in ext4_map_blocks()), the writeback error handler calls
mpage_release_unused_pages(invalidate=true) which invalidates affected
folios by clearing their uptodate flag via folio_clear_uptodate().
However, these folios may still be mapped in process page tables. If a
subsequent operation (such as ftruncate calling ext4_block_truncate_page)
triggers a write fault, the existing page table entry allows access to
the now-invalidated folio. This leads to ext4_page_mkwrite() being called
with a non-uptodate folio, which then gets marked dirty, triggering:
WARNING: CPU: 0 PID: 5 at mm/page-writeback.c:2960
__folio_mark_dirty+0x578/0x880
Call Trace:
fault_dirty_shared_page+0x16e/0x2d0
do_wp_page+0x38b/0xd20
handle_pte_fault+0x1da/0x450
The sequence leading to this warning is:
1. Process writes to mmap'd file, folio becomes uptodate and dirty
2. Writeback begins, but delayed allocation fails due to corruption
3. mpage_release_unused_pages(invalidate=true) is called:
- block_invalidate_folio() clears dirty flag
- folio_clear_uptodate() clears uptodate flag
- But folio remains mapped in page tables
4. Later, ftruncate triggers ext4_block_truncate_page()
5. This causes a write fault on the still-mapped folio
6. ext4_page_mkwrite() is called with folio that is !uptodate
7. block_page_mkwrite() marks buffers dirty
8. fault_dirty_shared_page() tries to mark folio dirty
9. block_dirty_folio() calls __folio_mark_dirty(warn=1)
10. WARNING triggers: WARN_ON_ONCE(warn && !uptodate && !dirty)
Fix this by unmapping folios from page tables before invalidating them
using unmap_mapping_pages(). This ensures that subsequent accesses
trigger new page faults rather than reusing invalidated folios through
stale page table entries.
Note that this results in data loss for any writes to the mmap'd region
that couldn't be written back, but this is expected behavior when
writeback fails due to filesystem corruption. The existing error message
already states "This should not happen!! Data will be lost".
Reported-by: syzbot+b0a0670332b6b3230a0a@syzkaller.appspotmail.com
Tested-by: syzbot+b0a0670332b6b3230a0a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b0a0670332b6b3230a0a
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20251205055914.1393799-1-kartikey406@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
While reviewing recent ext4 patch[1], Sashiko raised the following
concern[2]:
> If the filesystem is initially mounted with the discard option,
> deleting files will populate sbi->s_discard_list and queue
> s_discard_work. If it is then remounted with nodiscard, the
> EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is
> neither cancelled nor flushed.
[1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/
[2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev
The concern was valid, but it had nothing to do with the patch[1].
One of the problems with Sashiko in its current (early) form is that
it will detect pre-existing issues and report it as a problem with the
patch that it is reviewing.
In practice, it would be hard to hit deliberately (unless you are a
malicious syzkaller fuzzer), since it would involve mounting the file
system with -o discard, and then deleting a large number of files,
remounting the file system with -o nodiscard, and then immediately
unmounting the file system before the queued discard work has a change
to drain on its own.
Fix it because it's a real bug, and to avoid Sashiko from raising this
concern when analyzing future patches to mballoc.c.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: 55cdd0af2b ("ext4: get discard out of jbd2 commit kthread contex")
Cc: stable@kernel.org
Commit 4865c768b5 ("ext4: always allocate blocks only from groups
inode can use") restricts what blocks will be allocated for indirect
block based files to block numbers that fit within 32-bit block
numbers.
However, when using a review bot running on the latest Gemini LLM to
check this commit when backporting into an LTS based kernel, it raised
this concern:
If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal
group was populated via stream allocation from s_mb_last_groups),
then start will be >= ngroups.
Does this allow allocating blocks beyond the 32-bit limit for
indirect block mapped files? The commit message mentions that
ext4_mb_scan_groups_linear() takes care to not select unsupported
groups. However, its loop uses group = *start, and the very first
iteration will call ext4_mb_scan_group() with this unsupported
group because next_linear_group() is only called at the end of the
iteration.
After reviewing the code paths involved and considering the LLM
review, I determined that this can happen when there is a file system
where some files/directories are extent-mapped and others are
indirect-block mapped. To address this, add a safety clamp in
ext4_mb_scan_groups().
Fixes: 4865c768b5 ("ext4: always allocate blocks only from groups inode can use")
Cc: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun@linux.alibaba.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://patch.msgid.link/20260326045834.1175822-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
ext4_split_extent_at() retries after ext4_ext_insert_extent() fails by
refinding the original extent and restoring its length. That recovery is
only safe for transient resource failures such as -ENOSPC, -EDQUOT, and
-ENOMEM.
When ext4_ext_insert_extent() fails because the extent tree is already
corrupted, ext4_find_extent() can return a leaf path without p_ext.
ext4_split_extent_at() then dereferences path[depth].p_ext while trying to
fix up the original extent length, causing a NULL pointer dereference while
handling a pre-existing filesystem corruption.
Do not enter the recovery path for corruption errors, and validate p_ext
after refinding the extent before touching it. This keeps the recovery path
limited to cases it can actually repair and turns the syzbot-triggered crash
into a proper corruption report.
Fixes: 716b9c23b8 ("ext4: refactor split and convert extents")
Reported-by: syzbot+1ffa5d865557e51cb604@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1ffa5d865557e51cb604
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: hongao <hongao@uniontech.com>
Link: https://patch.msgid.link/EF77870F23FF9C90+20260324015815.35248-1-hongao@uniontech.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
During code review, Joseph found that ext4_fc_replay_inode() calls
ext4_get_fc_inode_loc() to get the inode location, which holds a
reference to iloc.bh that must be released via brelse().
However, several error paths jump to the 'out' label without
releasing iloc.bh:
- ext4_handle_dirty_metadata() failure
- sync_dirty_buffer() failure
- ext4_mark_inode_used() failure
- ext4_iget() failure
Fix this by introducing an 'out_brelse' label placed just before
the existing 'out' label to ensure iloc.bh is always released.
Additionally, make ext4_fc_replay_inode() propagate errors
properly instead of always returning 0.
Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Baokun Li <libaokun@linux.alibaba.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260323060836.3452660-1-libaokun@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Currently there is a race in ext4 when reallocating freed inode
resulting in a deadlock:
Task1 Task2
ext4_evict_inode()
handle = ext4_journal_start();
...
if (IS_SYNC(inode))
handle->h_sync = 1;
ext4_free_inode()
ext4_new_inode()
handle = ext4_journal_start()
finds the bit in inode bitmap
already clear
insert_inode_locked()
waits for inode to be
removed from the hash.
ext4_journal_stop(handle)
jbd2_journal_stop(handle)
jbd2_log_wait_commit(journal, tid);
- deadlocks waiting for transaction handle Task2 holds
Fix the problem by removing inode from the hash already in
ext4_clear_inode() by which time all IO for the inode is done so reuse
is already fine but we are still before possibly blocking on transaction
commit.
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Link: https://lore.kernel.org/all/abNvb2PcrKj1FBeC@ly-workstation
Fixes: 88ec797c46 ("fs: make insert_inode_locked() wait for inode destruction")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260320090428.24899-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Commit b98535d091 ("ext4: fix bug_on in start_this_handle during umount
filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work
to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups
reads during unmount. However, this introduced a use-after-free because
update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which
accesses the kobject's kernfs_node after it has been freed by kobject_del()
in ext4_unregister_sysfs():
update_super_work ext4_put_super
----------------- --------------
ext4_unregister_sysfs(sb)
kobject_del(&sbi->s_kobj)
__kobject_del()
sysfs_remove_dir()
kobj->sd = NULL
sysfs_put(sd)
kernfs_put() // RCU free
ext4_notify_error_sysfs(sbi)
sysfs_notify(&sbi->s_kobj)
kn = kobj->sd // stale pointer
kernfs_get(kn) // UAF on freed kernfs_node
ext4_journal_destroy()
flush_work(&sbi->s_sb_upd_work)
Instead of reordering the teardown sequence, fix this by making
ext4_notify_error_sysfs() detect that sysfs has already been torn down
by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call
in that case. A dedicated mutex (s_error_notify_mutex) serializes
ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs()
to prevent TOCTOU races where the kobject could be deleted between the
state_in_sysfs check and the sysfs_notify() call.
Fixes: b98535d091 ("ext4: fix bug_on in start_this_handle during umount filesystem")
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260319120336.157873-1-jiayuan.chen@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Now, only EXT4_KUNIT_TESTS=Y testcase will be compiled in 'extents.c'.
To solve this issue, the ext4 test code needs to be decoupled. The
'extents-test' module is compiled into 'ext4-test' module.
Fixes: cb1e0c1d1f ("ext4: kunit tests for extent splitting and conversion")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260314075258.1317579-4-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch targets two internal state machine invariants in checkpoint.c
residing inside functions that natively return integer error codes.
- In jbd2_cleanup_journal_tail(): A blocknr of 0 indicates a severely
corrupted journal superblock. Replaced the J_ASSERT with a WARN_ON_ONCE
and a graceful journal abort, returning -EFSCORRUPTED.
- In jbd2_log_do_checkpoint(): Replaced the J_ASSERT_BH checking for
an unexpected buffer_jwrite state. If the warning triggers, we
explicitly drop the just-taken get_bh() reference and call __flush_batch()
to safely clean up any previously queued buffers in the j_chkpt_bhs array,
preventing a memory leak before returning -EFSCORRUPTED.
Signed-off-by: Milos Nikic <nikic.milos@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun@linux.alibaba.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260311041548.159424-1-nikic.milos@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
On the mkdir/mknod path, when mapping logical blocks to physical blocks,
if inserting a new extent into the extent tree fails (in this example,
because the file system disabled the huge file feature when marking the
inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to
reclaim the physical block without deleting the corresponding data in
the extent tree. This causes subsequent mkdir operations to reference
the previously reclaimed physical block number again, even though this
physical block is already being used by the xattr block. Therefore, a
situation arises where both the directory and xattr are using the same
buffer head block in memory simultaneously.
The above causes ext4_xattr_block_set() to enter an infinite loop about
"inserted" and cannot release the inode lock, ultimately leading to the
143s blocking problem mentioned in [1].
If the metadata is corrupted, then trying to remove some extent space
can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE
was passed, remove space wrongly update quota information.
Jan Kara suggests distinguishing between two cases:
1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully
consistent and we must maintain its consistency including all the
accounting. However these errors can happen only early before we've
inserted the extent into the extent tree. So current code works correctly
for this case.
2) Some other error - this means metadata is corrupted. We should strive to
do as few modifications as possible to limit damage. So I'd just skip
freeing of allocated blocks.
[1]
INFO: task syz.0.17:5995 blocked for more than 143 seconds.
Call Trace:
inode_lock_nested include/linux/fs.h:1073 [inline]
__start_dirop fs/namei.c:2923 [inline]
start_dirop fs/namei.c:2934 [inline]
Reported-by: syzbot+512459401510e2a9a39f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1659aaaaa8d9d11265d7
Tested-by: syzbot+1659aaaaa8d9d11265d7@syzkaller.appspotmail.com
Reported-by: syzbot+1659aaaaa8d9d11265d7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=512459401510e2a9a39f
Tested-by: syzbot+1659aaaaa8d9d11265d7@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: syzbot+512459401510e2a9a39f@syzkaller.appspotmail.com
Link: https://patch.msgid.link/tencent_43696283A68450B761D76866C6F360E36705@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code.
Reported-by: syzbot+04c4e65cab786a2e5b7e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=04c4e65cab786a2e5b7e
Signed-off-by: Tejas Bharambe <tejas.bharambe@outlook.com>
Link: https://patch.msgid.link/JH0PR06MB66326016F9B6AD24097D232B897CA@JH0PR06MB6632.apcprd06.prod.outlook.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The commit aa373cf550 ("writeback: stop background/kupdate works from
livelocking other works") introduced an issue where unmounting a filesystem
in a multi-logical-partition scenario could lead to batch file data loss.
This problem was not fixed until the commit d92109891f ("fs/writeback:
bail out if there is no more inodes for IO and queued once"). It took
considerable time to identify the root cause. Additionally, in actual
production environments, we frequently encountered file data loss after
normal system reboots. Therefore, we are adding a check in the inode
release flow to verify whether all dirty pages have been flushed to disk,
in order to determine whether the data loss is caused by a logic issue in
the filesystem code.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260303012242.3206465-1-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
There's issue as follows:
...
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): error count since last fsck: 1
EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760
EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760
...
According to the log analysis, blocks are always requested from the
corrupted block group. This may happen as follows:
ext4_mb_find_by_goal
ext4_mb_load_buddy
ext4_mb_load_buddy_gfp
ext4_mb_init_cache
ext4_read_block_bitmap_nowait
ext4_wait_block_bitmap
ext4_validate_block_bitmap
if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
return -EFSCORRUPTED; // There's no logs.
if (err)
return err; // Will return error
ext4_lock_group(ac->ac_sb, group);
if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable
goto out;
After commit 9008a58e5d ("ext4: make the bitmap read routines return
real error codes") merged, Commit 163a203ddb ("ext4: mark block group
as corrupt on block bitmap error") is no real solution for allocating
blocks from corrupted block groups. This is because if
'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then
'ext4_mb_load_buddy()' may return an error. This means that the block
allocation will fail.
Therefore, check block group if corrupted when ext4_mb_load_buddy()
returns error.
Fixes: 163a203ddb ("ext4: mark block group as corrupt on block bitmap error")
Fixes: 9008a58e5d ("ext4: make the bitmap read routines return real error codes")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260302134619.3145520-1-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
commit 82f80e2e3b ("ext4: add extent status cache support to kunit tests"),
added ext4_es_register_shrinker() in extents_kunit_init() function but
failed to add the unregister shrinker routine in extents_kunit_exit().
This could cause the following percpu_counters list corruption bug.
ok 1 split unwrit extent to 2 extents and convert 1st half writ
slab kmalloc-4k start c0000002007ff000 pointer offset 1448 size 4096
list_add corruption. next->prev should be prev (c000000004bc9e60), but was 0000000000000000. (next=c0000002007ff5a8).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:29!
cpu 0x2: Vector: 700 (Program Check) at [c000000241927a30]
pc: c000000000f26ed0: __list_add_valid_or_report+0x120/0x164
lr: c000000000f26ecc: __list_add_valid_or_report+0x11c/0x164
sp: c000000241927cd0
msr: 800000000282b033
current = 0xc000000241215200
paca = 0xc0000003fffff300 irqmask: 0x03 irq_happened: 0x09
pid = 258, comm = kunit_try_catch
kernel BUG at lib/list_debug.c:29!
enter ? for help
__percpu_counter_init_many+0x148/0x184
ext4_es_register_shrinker+0x74/0x23c
extents_kunit_init+0x100/0x308
kunit_try_run_case+0x78/0x1f8
kunit_generic_run_threadfn_adapter+0x40/0x70
kthread+0x190/0x1a0
start_kernel_thread+0x14/0x18
2:mon>
This happens because:
extents_kunit_init(test N):
ext4_es_register_shrinker(sbi)
percpu_counters_init() x 4; // this adds 4 list nodes to global percpu_counters list
list_add(&fbc->list, &percpu_counters);
shrinker_register();
extents_kunit_exit(test N):
kfree(sbi); // frees sbi w/o removing those 4 list nodes.
// So, those list node now becomes dangling pointers
extents_kunit_init(test N+1):
kzalloc_obj(ext4_sb_info) // allocator returns same page, but zeroed.
ext4_es_register_shrinker(sbi)
percpu_counters_init()
list_add(&fbc->list, &percpu_counters);
__list_add_valid(new, prev, next);
next->prev != prev // list corruption bug detected, since next->prev = NULL
Fixes: 82f80e2e3b ("ext4: add extent status cache support to kunit tests")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/5bb9041471dab8ce870c191c19cbe4df57473be8.1772381213.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.
The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption.
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Link: https://patch.msgid.link/20260223123345.14838-2-ytohnuki@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
When inode metadata is changed, we sometimes just call
ext4_mark_inode_dirty() to track modified metadata. This copies inode
metadata into block buffer which is enough when we are journalling
metadata. However when we are running in nojournal mode we currently
fail to write the dirtied inode buffer during fsync(2) because the inode
is not marked as dirty. Use explicit ext4_write_inode() call to make
sure the inode table buffer is written to the disk. This is a band aid
solution but proper solution requires a much larger rewrite including
changes in metadata bh tracking infrastructure.
Reported-by: Free Ekanayaka <free.ekanayaka@gmail.com>
Link: https://lore.kernel.org/all/87il8nhxdm.fsf@x1.mail-host-address-is-not-set/
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260216164848.3074-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
recently_deleted() checks whether inode has been used in the near past.
However this can give false positive result when inode table is not
initialized yet and we are in fact comparing to random garbage (or stale
itable block of a filesystem before mkfs). Ultimately this results in
uninitialized inodes being skipped during inode allocation and possibly
they are never initialized and thus e2fsck complains. Verify if the
inode has been initialized before checking for dtime.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20260216164848.3074-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Fix an issue arising when ext4 features has_journal, ea_inode, and encrypt
are activated simultaneously, leading to ENOSPC when creating an encrypted
file.
Fix by passing XATTR_CREATE flag to xattr_set_handle function if a handle
is specified, i.e., when the function is called in the control flow of
creating a new inode. This aligns the number of jbd2 credits set_handle
checks for with the number allocated for creating a new inode.
ext4_set_context must not be called with a non-null handle (fs_data) if
fscrypt context xattr is not guaranteed to not exist yet. The only other
usage of this function currently is when handling the ioctl
FS_IOC_SET_ENCRYPTION_POLICY, which calls it with fs_data=NULL.
Fixes: c1a5d5f6ab ("ext4: improve journal credit handling in set xattr paths")
Co-developed-by: Anthony Durrer <anthonydev@fastmail.com>
Signed-off-by: Anthony Durrer <anthonydev@fastmail.com>
Signed-off-by: Simon Weber <simon.weber.39@gmail.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260207100148.724275-4-simon.weber.39@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Add a check in ext4_setattr() to convert files from inline data storage
to extent-based storage when truncate() grows the file size beyond the
inline capacity. This prevents the filesystem from entering an
inconsistent state where the inline data flag is set but the file size
exceeds what can be stored inline.
Without this fix, the following sequence causes a kernel BUG_ON():
1. Mount filesystem with inode that has inline flag set and small size
2. truncate(file, 50MB) - grows size but inline flag remains set
3. sendfile() attempts to write data
4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity)
The crash occurs because ext4_write_inline_data() expects inline storage
to accommodate the write, but the actual inline capacity (~60 bytes for
i_block + ~96 bytes for xattrs) is far smaller than the file size and
write request.
The fix checks if the new size from setattr exceeds the inode's actual
inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to
extent-based storage before proceeding with the size change.
This addresses the root cause by ensuring the inline data flag and file
size remain consistent during truncate operations.
Reported-by: syzbot+7de5fe447862fc37576f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7de5fe447862fc37576f
Tested-by: syzbot+7de5fe447862fc37576f@syzkaller.appspotmail.com
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Link: https://patch.msgid.link/20260207043607.1175976-1-kartikey406@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
There are cases where ext4_bio_write_page() gets called for a page which
has no buffers to submit. This happens e.g. when the part of the file is
actually a hole, when we cannot allocate blocks due to being called from
jbd2, or in data=journal mode when checkpointing writes the buffers
earlier. In these cases we just return from ext4_bio_write_page()
however if the page didn't need redirtying, we will leave stale DIRTY
and/or TOWRITE tags in xarray because those get cleared only in
__folio_start_writeback(). As a result we can leave these tags set in
mappings even after a final sync on filesystem that's getting remounted
read-only or that's being frozen. Various assertions can then get upset
when writeback is started on such filesystems (Gerald reported assertion
in ext4_journal_check_start() firing).
Fix the problem by cycling the page through writeback state even if we
decide nothing needs to be written for it so that xarray tags get
properly updated. This is slightly silly (we could update the xarray
tags directly) but I don't think a special helper messing with xarray
tags is really worth it in this relatively rare corner case.
Reported-by: Gerald Yang <gerald.yang@canonical.com>
Link: https://lore.kernel.org/all/20260128074515.2028982-1-gerald.yang@canonical.com
Fixes: dff4ac75ee ("ext4: move keep_towrite handling to ext4_bio_write_page()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260205092223.21287-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Commit '5f920d5d60 ("ext4: verify fast symlink length")' causes the
generic/475 test to fail during orphan cleanup of zero-length symlinks.
generic/475 84s ... _check_generic_filesystem: filesystem on /dev/vde is inconsistent
The fsck reports are provided below:
Deleted inode 9686 has zero dtime.
Deleted inode 158230 has zero dtime.
...
Inode bitmap differences: -9686 -158230
Orphan file (inode 12) block 13 is not clean.
Failed to initialize orphan file.
In ext4_symlink(), a newly created symlink can be added to the orphan
list due to ENOSPC. Its data has not been initialized, and its size is
zero. Therefore, we need to disregard the length check of the symbolic
link when cleaning up orphan inodes. Instead, we should ensure that the
nlink count is zero.
Fixes: 5f920d5d60 ("ext4: verify fast symlink length")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260131091156.1733648-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The one core change is a re-roll of the tag allocation fix from the
last pull request that uses the correct goto to unroll all the
allocations. The remianing fixes are all small ones in drivers.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCabbZ8xsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIW4hAEAyEbXcyUa4tNTsQfRPeJitgq4WDyPDv83
lnAvY/J5IEoBAJel9hRJ8lJfwziXVhMsxU3XHSXqQdA22N8tS7n4gTtq
=IGTE
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The one core change is a re-roll of the tag allocation fix from the
last pull request that uses the correct goto to unroll all the
allocations. The remianing fixes are all small ones in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Fix NULL pointer exception during user_scan()
scsi: qla2xxx: Completely fix fcport double free
scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend
scsi: core: Fix error handling for scsi_alloc_sdev()
- kprobes: avoid crash when rmmod/insmod after ftrace killed
This fixes a kernel crash caused by kprobes on the symbol in a
module which is unloaded after ftrace_kill() is called.
- kprobes: Remove unneeded warnings from __arm_kprobe_ftrace()
Remove unneeded WARN messages which can be kicked if the kprobe is
using ftrace and it fails to enable the ftrace. Since kprobes
correctly handle such failure, we don't need to warn it.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmm2hk8bHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bBZkH+gP3OllhdIU3AUB+vXEb
UEE3VE5IZRufSgtjbbJnYI3b8U2dWXw7wmb+fBJ0i0Zf6F+2IUr3hUg1pHNARvlL
MMu1YW7PG8gKGUsNc7jpHBVXrnefA4XpzXe7wtxaGvqAV16nL/6xhZlanGgL50Gv
+F9cETMIGZ8duF6XVgEMmUUCg88Iwpp9MjzDQOjpRK7z41LND3ccJ2V88ODzDevj
idnRbnk12Q9b7xZwGL5P5Ab163kHPFExsXQQnPmy/0fLcyGi8U3hY5EwYhOT85J0
qRZVHpR1yrXqBpaxD/7as5/pfuUluxdzwmDkyRuQGYW6y7xkhlVNEGWqsWZeYLuW
IZU=
=Zkm3
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Avoid crash when rmmod/insmod after ftrace killed
This fixes a kernel crash caused by kprobes on the symbol in a module
which is unloaded after ftrace_kill() is called.
- Remove unneeded warnings from __arm_kprobe_ftrace()
Remove unneeded WARN messages which can be triggered if the kprobe is
using ftrace and it fails to enable the ftrace. Since kprobes
correctly handle such failure, we don't need to warn it.
* tag 'probes-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Remove unneeded warnings from __arm_kprobe_ftrace()
kprobes: avoid crash when rmmod/insmod after ftrace killed
- lib/bootconfig: fix off-by-one in xbc_verify_tree() unclosed brace
error; This fixes a wrong error place in unclosed brace error
message.
- lib/bootconfig: check bounds before writing in __xbc_open_brace();
This fixes to check the array index before setting array, so that
the bootconfig can support 16th-depth nested brace correctly.
- lib/bootconfig: fix snprintf truncation check in
xbc_node_compose_key_after(); This fixes to handle the return
value of snprintf() correctly in case of the return value ==
size.
- bootconfig: Add bootconfig tests about braces
Add test cases for checking error position about unclosed brace
and ensuring supporting 16th depth nested braces correctly.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmmz2oUbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bVUsH/RZ1L9qQzbUH5gFtnKuP
cv8R84lVOf9+Yg9H+RCT689qCOTtLIVuK6LaDCChhbeiaF05hXIvRu0Dr1WmVrxc
O7ur1LucRNbEsB2O2UCWZjW1SBbNa9zvgaYGMFhBbkViGUUfj9uJgyn5zin0A6Pl
nwHuN3BNqEmR2aayikdLESwJ3IBYyrtPWg0/lBT+Dy5lcnh6h5+2HP1u70W3i7+c
4psAqA0A+a1nY9yQD+tw8kzUb8ZXgyTrkGkWECRkb/M7K843X/Csi64GYCGNlmuw
FXcIwxgGk5X3yQgDOoPHB6sBB7Cgo6jokxUJwrCiJintZJEQj5Ryzun8FmAi9vvO
NmU=
=15kg
-----END PGP SIGNATURE-----
Merge tag 'bootconfig-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- fix off-by-one in xbc_verify_tree() unclosed brace error. This fixes
a wrong error place in unclosed brace error message
- check bounds before writing in __xbc_open_brace(). This fixes to
check the array index before setting array, so that the bootconfig
can support 16th-depth nested brace correctly
- fix snprintf truncation check in xbc_node_compose_key_after(). This
fixes to handle the return value of snprintf() correctly in case of
the return value == size
- Add bootconfig tests about braces Add test cases for checking error
position about unclosed brace and ensuring supporting 16th depth
nested braces correctly
* tag 'bootconfig-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Add bootconfig tests about braces
lib/bootconfig: fix snprintf truncation check in xbc_node_compose_key_after()
lib/bootconfig: check bounds before writing in __xbc_open_brace()
lib/bootconfig: fix off-by-one in xbc_verify_tree() unclosed brace error
