The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB and UFS QMP PHYs on this board, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 12dd4ebda4 ("arm64: dts: qcom: Fix usb entries for SA8155p adp board")
Fixes: 5b85e8f222 ("arm64: dts: qcom: sa8155p-adp: Add base dts file")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-27-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be the lower voltage (~0.8V)
and the vdda-pll supply to be the higher voltage (~1.2V), as used by the
UFS QMP PHY on this SoC. But these two supplies are swapped for the USB
QMP PHY on this board, feeding 1.15V to vdda-phy and 0.72V to vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 49dab7311f ("arm64: dts: qcom: eliza-mtp: Enable USB and ADSP support")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-26-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be the lower voltage (~0.8V)
and the vdda-pll supply to be the higher voltage (~1.2V), as used by the
PCIe and UFS QMP PHYs on this SoC. But these two supplies are swapped for
the USB QMP PHYs on these boards, feeding 1.14V to vdda-phy and 0.72V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 76326da895 ("arm64: dts: qcom: lemans: Refactor ride/ride-r3 boards based on daughter cards")
Fixes: 7bd68ef806 ("arm64: dts: qcom: lemans-evk: Enable first USB controller in device mode")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-25-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be the lower voltage (~0.8V)
and the vdda-pll supply to be the higher voltage (~1.2V), as used by the
DisplayPort QMP PHY on this SoC. But these two supplies are swapped for
the USB QMP PHYs on this board, feeding 1.2V to vdda-phy and 0.72V/0.83V
to vdda-pll.
Fix it by swapping the two supplies back.
Fixes: c8b6302945 ("arm64: dts: qcom: glymur-crd: Enable USB support")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-24-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: b2f036a675 ("arm64: dts: qcom: kaanpaali: Add USB support for MTP platform")
Fixes: 01d15f5f69 ("arm64: dts: qcom: kaanpaali: Add USB support for QRD platform")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-23-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHY on this board, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 6339e41fa3 ("arm64: dts: qcom: sar2130p: add QAR2130P board file")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-22-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 2340f29e2b ("arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform")
Fixes: 530f824a4e ("arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-21-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 6fbdb3c1fa ("arm64: dts: qcom: sm8650: add initial SM8650 MTP dts")
Fixes: a834911d50 ("arm64: dts: qcom: sm8650: add initial SM8650 QRD dts")
Fixes: 0106144102 ("arm64: dts: qcom: sm8650: add support for the SM8650-HDK board")
Fixes: df260487f3 ("arm64: dts: qcom: add basic devicetree for Ayaneo Pocket S2 gaming console")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-20-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 64a0277c98 ("arm64: dts: qcom: Add PURWA-IOT-SOM platform")
Fixes: d3f600dc45 ("arm64: dts: qcom: Add Lenovo ThinkBook 16 G7 QOY device tree")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-19-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 5098ae93ce ("arm64: dts: qcom: Add HAMOA-IOT-SOM platform")
Fixes: af24122589 ("arm64: dts: qcom: Add the Lenovo IdeaCentre Mini X")
Fixes: ae5cee8e73 ("arm64: dts: qcom: x1e80100-crd: Fix USB PHYs regulators")
Fixes: 20676f7819 ("arm64: dts: qcom: x1e80100-qcp: Fix USB PHYs regulators")
Fixes: d0e2f8f62d ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15")
Fixes: 6516961352 ("arm64: dts: qcom: Add support for X1-based Asus Zenbook A14")
Fixes: 45247fe17d ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Fixes: 6f18b8d414 ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Fixes: 0d72ccaa1e ("arm64: dts: qcom: Add support for X1-based Surface Pro 11")
Fixes: 09d77be560 ("arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices")
Fixes: 8cf65490cd ("arm64: dts: qcom: Add dts for Medion SPRCHRGD 14 S1")
Fixes: f5b788d0e8 ("arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345")
Fixes: 7b8a31e82b ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows")
Fixes: 7d1cbe2f49 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6")
Fixes: e7733b4211 ("arm64: dts: qcom: Add support for Dell Inspiron 7441 / Latitude 7455")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-18-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 2ce38cc1e8 ("arm64: dts: qcom: sc8180x: Introduce Primus")
Fixes: 20dea72a39 ("arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-17-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 97a5b73b70 ("arm64: dts: qcom: sc7280-idp: Add device tree files for IDP2")
Fixes: 116f7cc43d ("arm64: dts: qcom: sc7280: Add herobrine-r1")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-16-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 0b766e7fe5 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Fixes: 7ec3e67307 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt")
Fixes: 4a9f8f8f2a ("arm64: dts: qcom: Add Acer Aspire 1")
Fixes: de8eed3597 ("arm64: dts: qcom: Add support for ECS LIVA QC710")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-15-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHY on this board, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 4cbea66876 ("arm64: dts: qcom: sm7225: Add device tree for Fairphone 4")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-14-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 04cf333afc ("arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts")
Fixes: 1cde54c54b ("arm64: dts: qcom: qcs6490: Add Thundercomm AI Mini PC G1 IoT")
Fixes: f055a39f68 ("arm64: dts: qcom: Add qcs6490-rubikpi3 board dts")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-13-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 9af6a9f32a ("arm64: dts: qcom: Add base qcm6490 idp board dts")
Fixes: a319cf4a4b ("arm64: dts: qcom: qcm6490: Introduce the Particle Tachyon")
Fixes: eee9602ad6 ("arm64: dts: qcom: qcm6490: Add device-tree for Fairphone 5")
Fixes: 249666e34c ("arm64: dts: qcom: add QCM6490 SHIFTphone 8")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-12-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHY on this board, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 0b12da4e28 ("arm64: dts: qcom: add base AIM300 dtsi")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-11-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: b5e25ded27 ("arm64: dts: qcom: sm8550: add support for the SM8550-HDK board")
Fixes: 772e6bc4a0 ("arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes")
Fixes: d228efe884 ("arm64: dts: qcom: sm8550-qrd: add QRD8550")
Fixes: 39c596304e ("arm64: dts: qcom: Add SM8550 Xperia 1 V")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-10-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.91V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 067b2b3616 ("arm64: dts: qcom: Add SM8450 HDK DTS")
Fixes: 27a0d0b846 ("arm64: dts: qcom: sm8450-qrd: Enable USB nodes")
Fixes: 1620676b85 ("arm64: dts: qcom: sm8450-nagara: Separate out Nagara platform dtsi")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-9-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 9208c19f21 ("arm64: dts: qcom: Introduce SM8350 HDK")
Fixes: c16160cfa5 ("arm64: dts: qcom: add minimal DTS for Microsoft Surface Duo 2")
Fixes: 054b40a611 ("arm64: dts: qcom: sm8350-mtp: enable USB nodes")
Fixes: 5a077120bc ("arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-8-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 91ed0e90fc ("arm64: dts: qcom: add sm8250 hdk dts")
Fixes: 221f0ef37f ("arm64: dts: sm8250-mtp: enable USB host nodes")
Fixes: 69cdb97ef6 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)")
Fixes: 264beb3cbd ("arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree")
Fixes: 52c90664f1 ("arm64: dts: qcom: qrb5165-rb5: Add USB support")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-7-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 0ab1b2d10a ("arm64: dts: qcom: add sm8150 hdk dts")
Fixes: b33d2868e8 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Fixes: d1f781db47 ("arm64: dts: qcom: add initial device-tree for Microsoft Surface Duo")
Fixes: d0a6ce59ea ("arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-6-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: aab69794b5 ("arm64: dts: qcom: Add support for Huawei MateBook E 2019")
Fixes: 44acee2078 ("arm64: dts: qcom: Add Lenovo Yoga C630")
Fixes: d4b341269e ("arm64: dts: qcom: Add support for Samsung Galaxy Book2")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-5-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 3f72e2d3e6 ("arm64: dts: qcom: Add Dragonboard 845c")
Fixes: a678adbf2d ("arm64: dts: qcom: Add support for Pixel 3 and Pixel 3 XL")
Fixes: 28ae8aa392 ("arm64: dts: qcom: add device tree for LG G7 and LG V35")
Fixes: cfe10d38aa ("arm64: dts: qcom: sdm845-mtp: Add nodes for USB")
Fixes: d711b22eee ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Fixes: 4588245915 ("arm64: dts: qcom: sdm845: add device tree for SHIFT6mq")
Fixes: dd6459a089 ("arm64: dts: qcom: split beryllium dts into common dtsi and tianma dts")
Fixes: be497abe19 ("arm64: dts: qcom: Add support for Xiaomi Mi Mix2s")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-4-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 519183af39 ("arm64: dts: qcom: add SA8540P and ADP")
Fixes: 6be310347c ("arm64: dts: qcom: add SA8540P ride(Qdrive-3)")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-3-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on this board, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 16a7fed117 ("arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-2-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing power-domains property to associate DISPCC with CX rail.
This is to ensure the genpd performance state votes on the GDSC to get
propagated to the CX rail and to avoid the rail under-voltage conditions.
Fixes: a2b3209670 ("arm64: dts: qcom: qcm2290: Add display nodes")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260718-shikra-dispcc-gpucc-v6-12-62703e05ef0f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add gpio-reserved-ranges property to the TLMM node for both Shikra
SoM variants (CQM and IQS). These reserved GPIOs are inaccessible
from the non-secure world and dedicated to fixed functions.
Co-developed-by: Anurag Pateriya <apateriy@qti.qualcomm.com>
Signed-off-by: Anurag Pateriya <apateriy@qti.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-10-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Shikra SoM cards include WCN3988 WiFi/Bluetooth chip, with supplies
provided by on-card PMICs. Enable both interfaces and provide the
required supply and calibration data.
Co-developed-by: Yepuri Siddu <yepuri.siddu@oss.qualcomm.com>
Signed-off-by: Yepuri Siddu <yepuri.siddu@oss.qualcomm.com>
Co-developed-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-9-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce the WiFi hardware description in shikra.dtsi, including
register space, interrupts, IOMMU configuration and reserved memory.
The node is kept disabled by default and is intended to be enabled
by board-specific device trees.
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-8-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The shikra includes one TSENS instance, with a total of 14 thermal
sensors distributed across various locations on the SoC.
The TSENS max/reset threshold is configured to 120°C in the hardware.
Enable all TSENS instances, and define the thermal zones with a hot trip
at 110°C and critical trip at 115°C.
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-7-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add CPU-to-DDR BWMON nodes and their corresponding opp tables for
Shikra SoC. This is necessary to enable power management and optimize
system performance from the perspective of dynamically changing DDR
frequencies.
Signed-off-by: Sayantan Chakraborty <sayantan.chakraborty@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-2-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree support for QUPv3 serial engine protocols on Shikra.
Shikra has 10 QUP serial engines under a single QUP wrapper, all with
support of GPI DMA engines.
Signed-off-by: Xueyao An <xueyao.an@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-1-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Setting CCI supply clock rate to higher value of 37.5MHz allows to
program the controller to configure its I2C bus speed to Fast-mode plus.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260729112719.1151700-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the sound card on the Eliza CQS EVK platform, including the
WSA8845 external speaker path and DMIC microphone capture via VA macro.
Enable the required LPASS WSA macro, VA macro and SoundWire controller
along with the necessary pinctrl configurations for DMIC and WSA
SoundWire interfaces.
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260731084032.3106477-3-ravi.hothi@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add SoC-level LPASS WSA macro, VA macro, SoundWire controller and LPASS
LPI pin controller nodes. DMIC and WSA SoundWire pinctrl states are
defined inside the LPASS LPI pin controller node. The hardware is similar
to the SM8750 platform.
The SoundWire controller is kept disabled so board DTS files can
selectively enable and configure it.
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260731084032.3106477-2-ravi.hothi@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the IMDT QCS8550 SBC which consists of an IMDT QCS8550 SoM
soldered onto an IMDT QCS8550 carrier board.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: William Bright <william.bright@imd-tec.com>
Link: https://lore.kernel.org/r/20260723-imdt-qcs8550-sbc-rfc-v5-2-2fb988854623@imd-tec.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-20-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-19-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-18-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-17-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-16-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-15-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-14-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
