This pull request contains device tree changes for ARM NXP LPC32xx intended
for v6.20, please pull the following:
- Frank fixes device tree checker warnings reported for NXP LPC32xx boards,
- Piotr addes a DMA mux block under SCB, DMA properties to controllers and
I2S support for NXP LPC32xx,
- Kuldeep corrects values of PrimeCell PL022 'clocks' and 'clock-names'
properties, this is the change from a waiting queue, recently it was
repeatedly done by Frank, the hesitation was about a probable ABI break,
but here in particular the risk is practically negligible due to the kept
backwards compatibale 'clocks' property,
- Vladimir adds a few missing properties to a number of LPC32xx controllers.
-----BEGIN PGP SIGNATURE-----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=EP7J
-----END PGP SIGNATURE-----
Merge tag 'lpc32xx-dt-for-6.20' of https://github.com/vzapolskiy/linux-lpc32xx into soc/dt
ARM: nxp: lpc: device tree updates for v6.20
This pull request contains device tree changes for ARM NXP LPC32xx intended
for v6.20, please pull the following:
- Frank fixes device tree checker warnings reported for NXP LPC32xx boards,
- Piotr addes a DMA mux block under SCB, DMA properties to controllers and
I2S support for NXP LPC32xx,
- Kuldeep corrects values of PrimeCell PL022 'clocks' and 'clock-names'
properties, this is the change from a waiting queue, recently it was
repeatedly done by Frank, the hesitation was about a probable ABI break,
but here in particular the risk is practically negligible due to the kept
backwards compatibale 'clocks' property,
- Vladimir adds a few missing properties to a number of LPC32xx controllers.
* tag 'lpc32xx-dt-for-6.20' of https://github.com/vzapolskiy/linux-lpc32xx:
arm: dts: lpc32xx: add interrupts property to Motor Control PWM
arm: dts: lpc32xx: add clocks property to Motor Control PWM device tree node
ARM: dts: lpc32xx: Add missing properties to I2S device tree nodes
ARM: dts: lpc32xx: Declare the second AHB master support on PL080 DMA controller
ARM: dts: lpc32xx: Add missing DMA properties
ARM: dts: lpc32xx: Use syscon for system control block
ARM: dts: lpc32xx: describe FLASH_INT of SLC NAND controller
ARM: dts: lpc32xx: change NAND controllers node names
ARM: dts: lpc32xx: Update spi clock properties
ARM: dts: lpc3250-phy3250: replace deprecated at25 properties with new ones
ARM: dts: lpc3250-phy3250: rename nodename at@0 to eeprom@0
ARM: dts: lpc3250-ea3250: add key- prefix for gpio-keys
ARM: dts: lpc32xx: remove usb bus and elevate all children nodes
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
New platforms:
- Facebook Anacapa
The Meta Anacapa BMC is the DC-SCM (Data Center Secure Control
Module) controller for the Meta OCP Open Rack Wide (ORW) compute tray.
This platform is a key component of the AMD Helios AI rack reference
design system, designed for next-generation AI workloads.
The BMC utilizes the Aspeed AST2600 SoC to manage the compute tray, which
contains up to 4 AMD Instinct MI450 Series GPUs (connected via a Broadcom
OCP NIC) and host CPUs. Its primary role is to provide essential system
control, power sequencing, and telemetry reporting for the compute complex
via the OpenBMC software stack.
For more detail on the AMD Helios reference design:
https://www.amd.com/en/blogs/2025/amd-helios-ai-rack-built-on-metas-2025-ocp-design.html
- ASRock Rack ALTRAD8
The ALTRAD8 BMC is an Aspeed AST2500-based BMC for the ASRock Rack
ALTRAD8UD-1L2T and ALTRAD8UD2-1L2Q boards.
Significant changes:
- Switch IBM FSI CFAM nodes to use non-deprecated AT25 properties
Updated platforms:
- bletchley (Facebook): USB-C tweaks
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCaWmZIhwcYW5kcmV3QGNv
ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGmugABAN9BnP/6ziUbNz0ds1yx
ZAs79GBfdb5ayvAs5jMy9a0uAP0ZiQoCTIuzeIY6/9MNdf9WdPKAwe+vtiTYmLpR
HtZKDw==
=C694
-----END PGP SIGNATURE-----
Merge tag 'aspeed-6.20-devicetree-1' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
aspeed: second batch of arm devicetree changes for 6.20
New platforms:
- Facebook Anacapa
The Meta Anacapa BMC is the DC-SCM (Data Center Secure Control
Module) controller for the Meta OCP Open Rack Wide (ORW) compute tray.
This platform is a key component of the AMD Helios AI rack reference
design system, designed for next-generation AI workloads.
The BMC utilizes the Aspeed AST2600 SoC to manage the compute tray, which
contains up to 4 AMD Instinct MI450 Series GPUs (connected via a Broadcom
OCP NIC) and host CPUs. Its primary role is to provide essential system
control, power sequencing, and telemetry reporting for the compute complex
via the OpenBMC software stack.
For more detail on the AMD Helios reference design:
https://www.amd.com/en/blogs/2025/amd-helios-ai-rack-built-on-metas-2025-ocp-design.html
- ASRock Rack ALTRAD8
The ALTRAD8 BMC is an Aspeed AST2500-based BMC for the ASRock Rack
ALTRAD8UD-1L2T and ALTRAD8UD2-1L2Q boards.
Significant changes:
- Switch IBM FSI CFAM nodes to use non-deprecated AT25 properties
Updated platforms:
- bletchley (Facebook): USB-C tweaks
* tag 'aspeed-6.20-devicetree-1' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: ibm: Use non-deprecated AT25 properties
ARM: dts: aspeed: add device tree for ASRock Rack ALTRAD8 BMC
dt-bindings: arm: aspeed: add ASRock Rack ALTRAD8 board
ARM: dts: aspeed: bletchley: Remove try-power-role from connectors
ARM: dts: aspeed: Add Facebook Anacapa platform
dt-bindings: arm: aspeed: Add compatible for Facebook Anacapa BMC
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Just the one patch from Rob adding the device_type property to the memory node
of the NPCM845 EVB DTS.
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCaWmTaRwcYW5kcmV3QGNv
ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGmwhoBALNO5prUzEg8jIylyKug
5bD3y3ngdi/qK4dgHbhqIt21AQC0qfbyPn04OYp7w1cKaYW/sDnm30IVuEcPDh2F
ZCCPDA==
=OGn7
-----END PGP SIGNATURE-----
Merge tag 'nuvoton-arm64-6.20-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
Nuvoton arm64 devicetree changes for 6.20
Just the one patch from Rob adding the device_type property to the memory node
of the NPCM845 EVB DTS.
* tag 'nuvoton-arm64-6.20-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
arm64: dts: nuvoton: Add missing "device_type" property on memory node
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
PCIe-slot-overlay for rk3576-evb1
New peripherals: some of the video decoders on rk3576 and rk3588
Enabled peripherals: many RK3588-NPUs and a lot of other peripherals on
a plethora of boards.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmlmS34QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgXr8B/4/WyFL/k6cg2ekp5kK1FRJwVNV6LlpfsyL
CM2nZxmt9Vg3VNlJK64aVJVA5724EBgHYk7ZYy+syPiisyPQAl9HX3J/oj6ijp3s
o4PxbqX12mtb+lMTHL9B3zRASsKkKKaQ5dJIXNjxmx0RxGWNsg1EnQmhoys7SLkf
+cKqbK6dbMvEc6d+NVUvhn4RWcENsRUxquMQKV3Ydk7CsI+PA2nHX4lZipowdUd5
UFXtFGISK+0mxUYtqbtO4r4ax01p1RRSCOZIB8xKm/kR5QQOHymKCYOHTZPyPIjL
Im+y+VnZy2b5OlVQNyjG7AFXZLPLThxxcIKIt/4zVuclKEpZlMl2
=bSiM
-----END PGP SIGNATURE-----
Merge tag 'v6.20-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: Orange Pi CM5 module + Baseboard, Radxa CM5 module + IO-board.
PCIe-slot-overlay for rk3576-evb1
New peripherals: some of the video decoders on rk3576 and rk3588
Enabled peripherals: many RK3588-NPUs and a lot of other peripherals on
a plethora of boards.
* tag 'v6.20-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (40 commits)
arm64: dts: rockchip: Add the vdpu383 Video Decoder on rk3576
arm64: dts: rockchip: Add the vdpu381 Video Decoders on RK3588
arm64: dts: rockchip: Add rk3588s-orangepi-cm5-base device tree
dt-bindings: arm: rockchip: Add Orange Pi CM5 Base
arm64: dts: rockchip: Enable second HDMI output on CM3588
arm64: dts: rockchip: Add HDMI to Gameforce Ace
arm64: dts: rockchip: Enable analog sound on RK3576 EVB1
arm64: dts: rockchip: Enable HDMI sound on RK3576 EVB1
arm64: dts: rockchip: Enable HDMI sound on Luckfox Core3576
arm64: dts: rockchip: Enable HDMI sound on FriendlyElec NanoPi M5
arm64: dts: rockchip: Use a readable audio card name on NanoPi M5
arm64: dts: rockchip: enable NPU on rk3588-jaguar
arm64: dts: rockchip: enable NPU on rk3588-tiger
dt-bindings: arm: rockchip: fix description for Radxa CM5
dt-bindings: arm: rockchip: fix description for Radxa CM3I
arm64: dts: rockchip: Add missing everest,es8388 supplies to rk3399-roc-pc-plus
arm64: dts: rockchip: Enable PCIe for ArmSoM Sige1
arm64: dts: rockchip: Enable the NPU on Turing RK1
arm64: dts: rockchip: Enable the NPU on FriendlyElec CM3588
arm64: dts: rockchip: Enable the NPU on NanoPC T6/T6-LTS
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This contains a small set of DT updates:
1. Align DTS node naming with established coding style by replacing underscores
with hyphens in node names. This is a safe change and does not affect ABI.
2. Add support for the CMN PMU on the Arm Morello platform, exposing the
CMN-Skeena (CMN-600 r3p1–compatible) PMU via the standard CMN-600 binding.
This enables PMU access on real Morello SDP hardware, where the registers
are functional.
-----BEGIN PGP SIGNATURE-----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=OCA/
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-7.0' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
Armv8 Juno/Vexpress updates for v7.0
This contains a small set of DT updates:
1. Align DTS node naming with established coding style by replacing underscores
with hyphens in node names. This is a safe change and does not affect ABI.
2. Add support for the CMN PMU on the Arm Morello platform, exposing the
CMN-Skeena (CMN-600 r3p1–compatible) PMU via the standard CMN-600 binding.
This enables PMU access on real Morello SDP hardware, where the registers
are functional.
* tag 'juno-updates-7.0' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: arm: Use hyphen in node names
arm64: dts: morello: Add CMN PMU
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Motor Control PWM shares an interrupt line with TIMER4 on MIC interrupt
controller, the interrupt serves as period (timer limit), pulse-width (match)
and capture event interrupt.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Motor Control PWM depends on its own supply clock, the clock gate control
is present in TIMCLK_CTRL1 register.
Fixes: b7d41c937e ("ARM: LPC32xx: Add the motor PWM to base dts file")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Add the vdpu383 Video Decoder variant to the RK3576 device tree.
Also allow using the dedicated SRAM as a pool.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://patch.msgid.link/20251020212009.8852-3-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the vdpu381 Video Decoders to the rk3588-base devicetree.
The RK3588 based SoCs all embed 2 vdpu381 decoders.
This also adds the dedicated IOMMU controllers.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://patch.msgid.link/20251020212009.8852-2-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Orange Pi CM5 Base board is a carrier board for the Orange Pi CM5
compute module. It has 3 ethernet ports, 2 USB ports, one HDMI output
and 4 CSI-2 inputs.
The device tree is split in two files, a .dtsi for the compute module
and a .dts for the carrier board. All the devices present on the carrier
board are enabled and tested, with the exception of the IR receiver due
to missing support for input capture in the PWM device's DT binding (and
driver).
This work is based on a combination of the Orange Pi 5 device tree from
the upstream kernel and the Orange Pi CM5 device tree from the BSP
kernel. All nodes and properties have been carefully checked to the best
of my abilities against the schematics of the carrier board. The
schematics of the compute module is not available publicly, so the
configuration of the PMIC hasn't been double-checked.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20251027215637.20715-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Orange Pi CM5 Base board is a carrier board for the Orange Pi CM5
compute module. It has 3 ethernet ports, 2 USB ports, one HDMI output
and 4 CSI-2 inputs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251027215637.20715-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for the HDMI port for the Gameforce Ace. The HDMI port
has no HPD pin present (the manufacturer's devicetree states the pin
is reused for an additional face button) so add the attribute of
no-hpd to poll for connected devices.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20251119225526.70588-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add 'lli-bus-interface-ahb2' and 'mem-bus-interface-ahb2' properties to
the PL080 DMA controller device tree node, tested with dmatest utility.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Add properties declared in the new DT binding nxp,lpc3220-dmamux.yaml
and corresponding phandles.
[vzapolskiy]:
1. rebased the change,
2. dmamux unit address shall be 0x78 instead of 0x7c,
3. removed unsupported 'dmas' properties from sd, ssp0, ssp1 and HS UARTs,
4. more non-functional updates by reordering properies,
5. minor updates to the commit message.
Link to the original change:
* https://lore.kernel.org/linux-arm-kernel/20240627150046.258795-6-piotr.wojtaszczyk@timesys.com/
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The clock controller is a part of NXP LPC32xx system control block (SCB),
and SCB provides a number of controllers apart of the clock controller.
[vzapolskiy]:
1. kept a simple comment,
2. renamed SoC specific compatible to 'nxp,lpc3220-scb' due to the SoC UM,
3. changed size in 'ranges', since it should cover more SCB functions,
4. updated the commit message.
Link to the original change:
* https://lore.kernel.org/linux-arm-kernel/20240627150046.258795-5-piotr.wojtaszczyk@timesys.com/
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
SLC and MLC NAND flash controllers fire the muxed interrupt FLASH_INT to
the SoC, add the interrupt property to the SLC device tree node.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The device tree node name of NAND controllers shall be 'nand-controller',
while 'flash' name is the name of NAND chip device tree nodes.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
PL022 binding require two clocks to be defined but NXP LPC32xx platform
doesn't comply with the bindings and define only one clock i.e apb_pclk.
Update SPI clocks and clocks-names property by adding appropriate clock
reference to make it compliant with the bindings.
Noteworthy, strictly speaking the change tackles DT ABI by changing
the order in the list of clock-names property values, however this level
of impact is considered as acceptable.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
[vzapolskiy: rebased and minor update to the commit message]
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The at25,* properties have been deprecated since 2012. These platforms
weren't upstream until 2020 and 2023, so it should be safe to switch
over to the "new" properties and just drop the deprecated ones.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
"device_type" is required for memory nodes, but is missing on Nuvoton
npcm845-evb.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The ALTRAD8 BMC is an Aspeed AST2500-based BMC for the ASRock Rack
ALTRAD8UD-1L2T and ALTRAD8UD2-1L2Q boards.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Tested-by: Tan Siewert <tan.siewert@hetzner.com>
Reviewed-by: Tan Siewert <tan.siewert@hetzner.com>
Link: https://patch.msgid.link/20251218161816.38155-3-rebecca@bsdio.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Remove the "try-power-role = sink" property from all USB-C connectors.
The try mechanism is unnecessary and wastes time during connection.
Since power-role = "dual" is already configured, standard USB PD
negotiation is sufficient and more efficient.
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The Meta Anacapa BMC is the DC-SCM (Data Center Secure Control
Module) controller for the Meta OCP Open Rack Wide (ORW) compute tray.
This platform is a key component of the AMD Helios AI rack reference
design system, designed for next-generation AI workloads.
The BMC utilizes the Aspeed AST2600 SoC to manage the compute tray, which
contains up to 4 AMD Instinct MI450 Series GPUs (connected via a Broadcom
OCP NIC) and host CPUs. Its primary role is to provide essential system
control, power sequencing, and telemetry reporting for the compute complex
via the OpenBMC software stack.
For more detail on the AMD Helios reference design:
https://www.amd.com/en/blogs/2025/amd-helios-ai-rack-built-on-metas-2025-ocp-design.html
Signed-off-by: Peter Shen <sjg168@gmail.com>
Link: https://patch.msgid.link/20251219091632.1598603-3-sjg168@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
- Add USB3.2 host and more RSCI serial support for the RZ/G3E SoC and
the RZ/G3E SMARC EVK board,
- Add display and USB3.0 host support for the RZ/V2H and RZ/V2N SoCs
and their EVK boards,
- Add SPI NOR Flash support for the Yuridenki-Shokai Kakip board,
- Add PCIe support for the RZ/G3S SoC and the RZ/G3S SMARC EVK board,
- Add SPI, interrupt controller, and DMAC support for the RZ/T2H,
RZ/N2H, and RZ/V2N SoCs,
- Add NMI wakeup button support for the RZ/V2N EVK board,
- Add thermal support for the RZ/V2N SoC,
- Add system watchdog timer support for R-Car V3H, which is reserved
for secure firmware,
- Add window watchdog timer support for R-Car V3M, V3H, and Gen4 SoCs,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaVvEhQAKCRCKwlD9ZEnx
cGZiAQDwTlmwHs27zAQms6Aw+wNWxB37PcnSI/f7LiPVt5gxogEAxEaSHvoXgdp8
JH+r2ER3kooWi4fzrOpjn8w85lH6LwM=
=mqOa
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jqCw
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.20
- Add USB3.2 host and more RSCI serial support for the RZ/G3E SoC and
the RZ/G3E SMARC EVK board,
- Add display and USB3.0 host support for the RZ/V2H and RZ/V2N SoCs
and their EVK boards,
- Add SPI NOR Flash support for the Yuridenki-Shokai Kakip board,
- Add PCIe support for the RZ/G3S SoC and the RZ/G3S SMARC EVK board,
- Add SPI, interrupt controller, and DMAC support for the RZ/T2H,
RZ/N2H, and RZ/V2N SoCs,
- Add NMI wakeup button support for the RZ/V2N EVK board,
- Add thermal support for the RZ/V2N SoC,
- Add system watchdog timer support for R-Car V3H, which is reserved
for secure firmware,
- Add window watchdog timer support for R-Car V3M, V3H, and Gen4 SoCs,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (41 commits)
arm64: dts: renesas: r8a779h0: Add WWDT nodes
arm64: dts: renesas: r8a779g0: Add WWDT nodes
arm64: dts: renesas: r8a779f0: Add WWDT nodes
arm64: dts: renesas: r8a779a0: Add WWDT nodes
arm64: dts: renesas: r8a77980: Add WWDT nodes
arm64: dts: renesas: r8a77970: Add WWDT nodes
arm64: dts: renesas: condor/v3hsk: Mark SWDT as reserved
arm64: dts: renesas: r8a77980: Add SWDT node
arm64: dts: renesas: r9a09g056: Add TSU nodes
arm64: dts: renesas: r9a09g087: Add DMAC support
arm64: dts: renesas: r9a09g077: Add DMAC support
arm64: dts: renesas: r9a09g087: Add ICU support
arm64: dts: renesas: r9a09g077: Add ICU support
arm64: dts: renesas: r9a09g047e57-smarc: Enable rsci{2,4,9} nodes
arm64: dts: renesas: renesas-smarc2: Move aliases to board DTS
arm64: dts: renesas: r9a09g047: Add RSCI nodes
ARM: dts: renesas: r9a06g032: Add Ethernet switch interrupts
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Add NMI wakeup button support
arm64: dts: renesas: r9a09g056: Add RSPI nodes
arm64: dts: renesas: r9a09g056: Add DMAC nodes
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 6.19, please pull the following:
- Peter enables the random number generator on BCM2712
- Stanimir adds the watchdog Device Tree node for BCM2712
-----BEGIN PGP SIGNATURE-----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=1Fiq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmlekdEACgkQmmx57+YA
GNlqQg/+M5whtchKT1vJudPa3c8hqyt0r8yTBHi1FetMpeAm8FwZ6QY/xga5e38+
N+ym+Sb1NwWjYDRd+fM2ea0ujKnDKRMsicwD4g0lYVQidEHI7auw0iZQI3h/OElB
XykVok7dbM0vq+Qsavg1rB714FTBb6BchXEAux3ZIQNNP4nvil0ChaaAjDbQrcYk
kxxV6LQoMSiFkQfp+hl9zs+fX2s2jrWAtihqmnUSyfut+I2k/IQGOo421ovLUwTi
cJC6jG3J9CXbIUOJ5gXcphDsvGKS2AgSyn0CyETBHBkdt9HELryPYytSGM1dj7JU
AKf9R3QcBbIkEPvd2t1kQ9inGLIuBF2A9qV10Cc8X5Um8b312squ7fYl/OO53BKe
sbKdfwzwLKo52IGLDSL2o9Tq3AtF3obqoGmPj/8mmWxm+ekeJtFUgDhxNYSiirp0
hjVusbQvQhB8W9F7QAi3od4X/1Iu9Q2j2mHXCvb9LkLOG0Cziias1BPZBAb4UEpA
YzMPdLXma+GlmmPHmB1KPilcFODIGi2WneoeEYFVnouQ84urzIYXZQ4Df45Nlf3j
qII9oF4FMG96PEYl+QkAGP+IsMPy6wm2ryjHSLGCRCeiTFsVUxbRKobTD8MRj4As
dof0onpi73/Ml/C3sr5dDT6o8bvmSeJey5gwtGLa4UDl/YzK9jw=
=zKhO
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.19/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tre updates
for 6.19, please pull the following:
- Peter enables the random number generator on BCM2712
- Stanimir adds the watchdog Device Tree node for BCM2712
* tag 'arm-soc/for-6.19/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: Add watchdog DT node
arm64: dts: broadcom: bcm2712: Enable RNG
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rockchip RK3576 EVB1 board uses the typical configuration with an ES8388
analog codec driven from built-in SAI I2S.
Add device tree nodes for it.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://patch.msgid.link/20251229-rk3576-sound-v1-7-2f59ef0d19b1@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
All RK3576 boards get their HDMI sound from SAI6, which is internally
connected to the HDMI codec. Enable this for Rockchip RK3576 EVB1
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://patch.msgid.link/20251229-rk3576-sound-v1-6-2f59ef0d19b1@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
All RK3576 boards get their HDMI sound from SAI6, which is internally
connected to the HDMI codec. Enable this for Luckfox Core3576
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://patch.msgid.link/20251229-rk3576-sound-v1-5-2f59ef0d19b1@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
All RK3576 boards get their HDMI sound from SAI6, which is internally
connected to the HDMI codec. Enable this for FriendlyElec NanoPi M5.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://patch.msgid.link/20251229-rk3576-sound-v1-4-2f59ef0d19b1@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
'simple-audio-card,name' ends up in user visible places such as ALSA mixer
names, so use a more human-readable name instead of realtek,rt5616-codec
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://patch.msgid.link/20251229-rk3576-sound-v1-3-2f59ef0d19b1@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the NPU cores and their mmus and wire up the supply-regulator.
The regulator itself was already defined, but it does not need to be
always on - the npu can control it.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://patch.msgid.link/20250812085213.1071106-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the NPU cores and their mmus and wire up the supply-regulator.
The regulator itself was already defined, but it does not need to be
always on - the npu can control it.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://patch.msgid.link/20250812085213.1071106-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the RTL8125 network controller and corresponding PHY
connected via PCIe on the ArmSoM Sige1.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patch.msgid.link/20260106100000.225445-1-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Pinephone Pro uses STK3311 according to the schematics.
Tests:
~ $ monitor-sensor --light
// When the sensor is exposed, it get's fluctating values such as
Light changed: 1.800000 (lux)
Light changed: 1.700000 (lux)
Light changed: 1.800000 (lux)
Light changed: 1.700000 (lux)
Light changed: 1.600000 (lux)
Light changed: 1.100000 (lux)
// When covering the sensor, it prints a low value and stops printing
Light changed: 0.200000 (lux)
~ $ monitor-sensor --proximity
// When it goes away from an object
Proximity value changed: 0
// When it comes near an object
Proximity value changed: 1
Co-developed-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Link: https://patch.msgid.link/20251225-ppp_light_accel_mag_vol-down-v6-2-8c79a4e87001@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Pinephone Pro uses AF8133J according to the schematic.
The mount-matrix was added by Leonardo on top of Ondrej's work of adding
the magnetometer. It was verified with Leonardo's compass app:
https://gitlab.com/lgtrombetta/compass
Co-developed-by: Leonardo G. Trombetta <lgtrombetta@gmx.com>
Signed-off-by: Leonardo G. Trombetta <lgtrombetta@gmx.com>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Link: https://patch.msgid.link/20251225-ppp_light_accel_mag_vol-down-v6-1-8c79a4e87001@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>