A follow on patch will introduce CONFIG_USB_PCI_AMD governing the AMD
quirk and adding its compile time dependency on HAS_IOPORT. In order to
minimize the number of #ifdefs in C files and make that patch easier
to read first group the code together. This is pure code movement
no functional change is intended.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230911125653.1393895-2-schnelle@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert list_for_each() to list_for_each_entry() so that the p/pos
list_head pointer and list_entry() call are no longer needed, which
can reduce a few lines of code. No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230830085658.527752-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently if ucsi_send_command() fails, then we bail out without
clearing EVENT_PENDING flag. So when the next connector change
event comes, ucsi_connector_change() won't queue the con->work,
because of which none of the new events will be processed.
Fix this by clearing EVENT_PENDING flag if ucsi_send_command()
fails.
Cc: stable@vger.kernel.org # 5.16
Fixes: 512df95b94 ("usb: typec: ucsi: Better fix for missing unplug events issue")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/1694423055-8440-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB2412 is a 2-Port USB 2.0 hub controller that provides a reset pin
and a single 3v3 powre source, which makes it suitable to be controlled
by the onboard_hub driver.
This hub has the same reset timings as USB2514/2517 and the same
onboard hub specific-data can be reused for USB2412.
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Cc: stable <stable@kernel.org>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230911-topic-2412_onboard_hub-v1-1-7704181ddfff@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-40-u.kleine-koenig@pengutronix.de
Signed-off-by: Nishanth Menon <nm@ti.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-39-u.kleine-koenig@pengutronix.de
Signed-off-by: Nishanth Menon <nm@ti.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-38-u.kleine-koenig@pengutronix.de
Signed-off-by: Nishanth Menon <nm@ti.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-37-u.kleine-koenig@pengutronix.de
Signed-off-by: Nishanth Menon <nm@ti.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-36-u.kleine-koenig@pengutronix.de
Signed-off-by: Nishanth Menon <nm@ti.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-35-u.kleine-koenig@pengutronix.de
Signed-off-by: Nishanth Menon <nm@ti.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Link: https://lore.kernel.org/r/20230925095532.1984344-34-u.kleine-koenig@pengutronix.de
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI-SCI message protocol provides a way to communicate between
various compute processors with a central system controller entity. It
provides the fundamental device management capability and clock control
in the SOCs that it's used in.
The remove function failed to do all the necessary cleanup if
there are registered users. Some things are freed however which
likely results in an oops later on.
Ensure that the driver isn't unbound by suppressing its bind and unbind
sysfs attributes. As the driver is built-in there is no way to remove
device once bound.
We can also remove the ti_sci_remove call along with the
ti_sci_debugfs_destroy as there are no callers for it any longer.
Fixes: aa276781a6 ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol")
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Closes: https://lore.kernel.org/linux-arm-kernel/20230216083908.mvmydic5lpi3ogo7@pengutronix.de/
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230921091025.133130-1-d-gole@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
We don't want to use the value of ilog2(0) as dummy.buswidth is 0 when
dummy.nbytes is 0. Since we have no dummy bytes, we don't need to
configure the dummy byte bits per clock register value anyway.
Signed-off-by: "William A. Kennington III" <william@wkennington.com>
Link: https://lore.kernel.org/r/20230922182812.2728066-1-william@wkennington.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two places in the code where we retrieve a lookup table using
gpiod_find_lookup_table() (which protects the table list with the lookup
table lock) and then use it after the lock is released.
We need to keep the lookup table mutex locked the entire time we're using
the tables. Remove the locking from gpiod_find_lookup_table() and use
guards to protect the code actually using the table objects.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
- Describe explicitly that sched_rt_runtime_us is allocated from
sched_rt_period_us and hence always less or equal to that value.
- The limit for sched_rt_runtime_us is not INT_MAX-1, but rather it's
limited by the value of sched_rt_period_us. If sched_rt_period_us is
INT_MAX then sched_rt_runtime_us can be set to INT_MAX as well.
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231002115553.3007-3-chrubis@suse.cz
The validation of the value written to sched_rt_period_us was broken
because:
- the sysclt_sched_rt_period is declared as unsigned int
- parsed by proc_do_intvec()
- the range is asserted after the value parsed by proc_do_intvec()
Because of this negative values written to the file were written into a
unsigned integer that were later on interpreted as large positive
integers which did passed the check:
if (sysclt_sched_rt_period <= 0)
return EINVAL;
This commit fixes the parsing by setting explicit range for both
perid_us and runtime_us into the sched_rt_sysctls table and processes
the values with proc_dointvec_minmax() instead.
Alternatively if we wanted to use full range of unsigned int for the
period value we would have to split the proc_handler and use
proc_douintvec() for it however even the
Documentation/scheduller/sched-rt-group.rst describes the range as 1 to
INT_MAX.
As far as I can tell the only problem this causes is that the sysctl
file allows writing negative values which when read back may confuse
userspace.
There is also a LTP test being submitted for these sysctl files at:
http://patchwork.ozlabs.org/project/ltp/patch/20230901144433.2526-1-chrubis@suse.cz/
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231002115553.3007-2-chrubis@suse.cz
fixed m68k compiling issue: mapping table can save code field; storing the
dev_idx as a member of block can reduce unnecessary time and system
resource comsumption of dev_idx mapping every time the block data writing
to the dsp.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20231002090434.1896-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.
Fixes: f9efae9549 ("ASoC: SOF: ipc4-topology: Add support for base config extension")
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZQSr15AYJpDpipg6@work
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy header <linux/gpio.h> but doesn't
use it. Drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20230926-descriptors-asoc-ti-v1-5-60cf4f8adbc5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Pandora uses GPIO descriptors pretty much exclusively, but not
for ASoC, so let's fix it. Register the pins in a descriptor table
in the machine since the ASoC device is not using device tree.
Use static locals for the GPIO descriptors because I'm not able
to experient with better state storage on any real hardware. Others
using the Pandora can come afterwards and improve this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20230926-descriptors-asoc-ti-v1-4-60cf4f8adbc5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The TWL4030 is actually only ever populated from the device tree,
so we can just pass the right device and headphone jack GPIO name
to snd_soc_jack_add_gpios() and it will pick the right GPIO right
from the device tree.
The platform data patch is unused (no in-tree users of the pdata
method) but these can use GPIO descriptor tables rather than global
GPIO numbers if they need this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20230926-descriptors-asoc-ti-v1-3-60cf4f8adbc5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The N810 uses GPIO descriptors pretty much exclusively, but not
for ASoC, so let's fix it. Register the pins in a descriptor table
in the machine since the ASoC device is not using device tree.
Use static locals for the GPIO descriptors because I'm not able
to experient with better state storage on any real hardware. Others
using the N810 can come afterwards and improve this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20230926-descriptors-asoc-ti-v1-1-60cf4f8adbc5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The RX51/Nokia n900 uses the legacy GPIO header to convert a GPIO
back to the global GPIO numberspace and then the jack using it
in the snd_soc_jack_add_gpios() call immediately looks up the
corresponding descriptor again.
The snd_soc_jack_add_gpios() handles GPIOs passed with devices
just fine: pass in the device instead, and rename the GPIO
to match the property in the device tree, and it should work
all the same but without all the trouble.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20230926-descriptors-asoc-ti-v1-2-60cf4f8adbc5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This will attempt to disable the regulators if the initial enable fails
which is a bug.
Fix this bug by modifying the code to the correct sequence.
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_4F37C9B5315B7960041E8E0ADDA869128F08@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 4e08713336 ("ASoC: hdmi-codec: fix channel info for
compressed formats") accidentally changed hcp->chmap_idx from
ca_id, the CEA channel allocation ID, to idx, the index to
the table of channel mappings ordered by preference.
This resulted in wrong channel maps being reported to userspace,
eg for 5.1 "FL,FR,LFE,FC" was reported instead of the expected
"FL,FR,LFE,FC,RL,RR":
~ # speaker-test -c 6 -t sine
...
0 - Front Left
3 - Front Center
1 - Front Right
2 - LFE
4 - Unknown
5 - Unknown
~ # amixer cget iface=PCM,name='Playback Channel Map' | grep ': values'
: values=3,4,8,7,0,0,0,0
Switch this back to ca_id in case of PCM audio so the correct channel
map is reported again and set it to HDMI_CODEC_CHMAP_IDX_UNKNOWN in
case of non-PCM audio so the PCM channel map control returns "Unknown"
channels (value 0).
Fixes: 4e08713336 ("ASoC: hdmi-codec: fix channel info for compressed formats")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20230929195027.97136-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In snp_accept_memory(), the npages variables value is calculated from
phys_addr_t variables but is an unsigned int. A very large range passed
into snp_accept_memory() could lead to truncating npages to zero. This
doesn't happen at the moment but let's be prepared.
Fixes: 6c32117963 ("x86/sev: Add SNP-specific unaccepted memory support")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/6d511c25576494f682063c9fb6c705b526a3757e.1687441505.git.thomas.lendacky@amd.com
SNP retrieves the majority of CPUID information from the SNP CPUID page.
But there are times when that information needs to be supplemented by the
hypervisor, for example, obtaining the initial APIC ID of the vCPU from
leaf 1.
The current implementation uses the MSR protocol to retrieve the data from
the hypervisor, even when a GHCB exists. The problem arises when an NMI
arrives on return from the VMGEXIT. The NMI will be immediately serviced
and may generate a #VC requiring communication with the hypervisor.
Since a GHCB exists in this case, it will be used. As part of using the
GHCB, the #VC handler will write the GHCB physical address into the GHCB
MSR and the #VC will be handled.
When the NMI completes, processing resumes at the site of the VMGEXIT
which is expecting to read the GHCB MSR and find a CPUID MSR protocol
response. Since the NMI handling overwrote the GHCB MSR response, the
guest will see an invalid reply from the hypervisor and self-terminate.
Fix this problem by using the GHCB when it is available. Any NMI
received is properly handled because the GHCB contents are copied into
a backup page and restored on NMI exit, thus preserving the active GHCB
request or result.
[ bp: Touchups. ]
Fixes: ee0bfa08a3 ("x86/compressed/64: Add support for SEV-SNP CPUID table in #VC handlers")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/a5856fa1ebe3879de91a8f6298b6bbd901c61881.1690578565.git.thomas.lendacky@amd.com
The return type of cdns_set_active () is inconsistent
depending on whether CONFIG_PM_SLEEP is enabled, so the
return value is modified to void type.
Reported-by: Pavel Machek <pavel@denx.de>
Closes: https://lore.kernel.org/all/ZP7lIKUzD68XA91j@duo.ucw.cz/
Fixes: 2319b9c87f ("usb: cdns3: Put the cdns set active part outside the spin lock")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230926075333.1791011-1-xiaolei.wang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
amlogic_thermal_disable() always returned zero. Change it to return no
value and then trivially convert the driver to .remove_new() and fix a
whitespace inconsitency en passant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The USB host on Tegra3 works with 32-bit alignment. Previous code tried
to align the buffer, but it did align the wrapper struct instead, so
the buffer was at a constant offset of 8 bytes (two pointers) from
expected alignment. Since kmalloc() guarantees at least 8-byte
alignment already, the alignment-extending is removed.
Fixes: fc53d52790 ("usb: chipidea: tegra: Support host mode")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/a0d917d492b1f91ee0019e68b8e8bca9c585393f.1695934946.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tegra USB controllers seem to issue DMA in full 32-bit words only and thus
may overwrite unevenly-sized buffers. One such occurrence is detected by
SLUB when receiving a reply to a 1-byte buffer (below). Fix this by
allocating a bounce buffer also for buffers with sizes not a multiple of 4.
=============================================================================
BUG kmalloc-64 (Tainted: G B ): kmalloc Redzone overwritten
-----------------------------------------------------------------------------
0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc
Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41
__kmem_cache_alloc_node+0x12f/0x1e4
__kmalloc+0x33/0x8c
usb_get_status+0x2b/0xac
hub_probe+0x5e9/0xcec
usb_probe_interface+0xbf/0x21c
really_probe+0xa5/0x2c4
__driver_probe_device+0x75/0x174
driver_probe_device+0x31/0x94
__device_attach_driver+0x65/0xc0
bus_for_each_drv+0x4b/0x74
__device_attach+0x69/0x120
bus_probe_device+0x65/0x6c
device_add+0x48b/0x5f8
usb_set_configuration+0x37b/0x6b4
usb_generic_driver_probe+0x37/0x68
usb_probe_device+0x35/0xb4
Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0)
Object 0x8555cd00 @offset=3328 fp=0x00000000
Redzone 8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 8555cd40: cc cc cc cc ....
Padding 8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ
CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G B 6.6.0-rc1mq-00118-g59786f827ea1 #1115
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: usb_hub_wq hub_event
[<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14)
[<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c)
[<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4)
[<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290)
[<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8)
[<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128)
[<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac)
[<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec)
[<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c)
[<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4)
[<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174)
[<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94)
usb 1-1: device descriptor read/8, error -71
Fixes: fc53d52790 ("usb: chipidea: tegra: Support host mode")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/ef8466b834c1726f5404c95c3e192e90460146f8.1695934946.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
