GPIO keys and LEDs are not part of the SoC, so move them to top-level to
fix dtbs_check warnings like:
qcom-ipq8064-rb3011.dtb: soc: gpio-keys: {'compatible': ['gpio-keys'], ... should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230924183914.51414-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fixed regulator put under "regulators" node will not be populated,
unless simple-bus or something similar is used. Drop the "regulators"
wrapper node to fix this.
Fixes: 2c5e596524 ("ARM: dts: Add MDM9615 dtsi")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230924183914.51414-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
regulator-fixed does not have a "regulator-type" property:
qcom-apq8060-dragonboard.dtb: regulator-fixed: Unevaluated properties are not allowed ('regulator-type' was unexpected)
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230924183914.51414-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
regulator-fixed does not have a "regulator-type" property:
qcom-apq8064-ifc6410.dtb: regulator-ext-3p3v: Unevaluated properties are not allowed ('regulator-type' was unexpected)
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230924183914.51414-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bindings expect clocks to be in different order:
qcom-sdx65-mtp.dtb: mmc@8804000: clock-names:0: 'iface' was expected
qcom-sdx65-mtp.dtb: mmc@8804000: clock-names:1: 'core' was expected
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230924183335.49961-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DSI node does not accept nor use "label" property:
qcom-apq8064-asus-nexus7-flo.dtb: dsi@4700000: Unevaluated properties are not allowed ('label' was unexpected)
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230924183335.49961-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Switch to GPL version of EXPORT_SYMBOL for Qualcomm SoC drivers.
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Trilok Soni <quic_tsoni@quicinc.com>
Link: https://lore.kernel.org/r/20230922184817.5183-1-quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct qcom_smem.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: llvm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175413.work.929-kees@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing regulator supplies to the ADV7533 HDMI bridge to fix
the following dtbs_check warnings. They are all also supplied by
pm8916_l6 so there is no functional difference.
apq8016-sbc.dtb: bridge@39: 'dvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'pvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'a2vdd-supply' is a required property
from schema display/bridge/adi,adv7533.yaml
Fixes: 28546b0955 ("arm64: dts: apq8016-sbc: Add HDMI display support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230922-db410c-adv7533-regulators-v1-1-68aba71e529b@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In some configurations, the exact placement of the rmtfs shared memory
region isn't so strict. The DeviceTree author can then choose to use the
"size" property and rely on the OS for placement (in combination with
"alloc-ranges", if desired).
But on some platforms the rmtfs memory region may not be allocated
adjacent to regions allocated by other clients. Add support for
discarding the first and last 4k block in the region, if
qcom,use-guard-pages is specified in DeviceTree.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230920-rmtfs-mem-guard-pages-v3-2-305b37219b78@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On some Qualcomm platforms the firwmare, or hardware, does not
gracefully handle memory protection of the rmtfs memory region when
placed adjacent to other protected region. Some DeviceTree authors have
worked around this issue by explicitly reserving the space around the
region, but this prevents such author to use rely on the OS to place the
region, through the use of "size" (instead of a fixed location).
Introduce a flag to indicate that guard pages need be carved at the
beginning and end of the memory region. The user shall account for the
two pages in the defined size.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230920-rmtfs-mem-guard-pages-v3-1-305b37219b78@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Support IGT (Intel GPU Tools) in Mediatek DSI driver.
According to the description of MIPI Alliance Specification for D-PHY
Version 1.1, the maximum supported data rate is 1.5Gbps, so add mode_valid
callback to dsi bridge to filter out the data rate exceeding the
Specification.
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230823092047.32258-1-shuijing.li@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Update the documentation for the KVM_SET_PMU_EVENT_FILTER ioctl
to include a detailed description of how fixed performance events
are handled in the pmu filter. The action and fixed_counter_bitmap
members of the pmu filter to determine whether fixed performance
events can be programmed by the guest. This information is helpful
for correctly configuring the fixed_counter_bitmap and action fields
to filter fixed performance events.
Suggested-by: Like Xu <likexu@tencent.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304150850.rx4UDDsB-lkp@intel.com
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230531075052.43239-1-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Before this patch, the implementation is hacky and hard to understand:
1) md_seq_start set pos to 1;
2) md_seq_show found pos is 1, then print Personalities;
3) md_seq_next found pos is 1, then it update pos to the first mddev;
4) md_seq_show found pos is not 1 or 2, show mddev;
5) md_seq_next found pos is not 1 or 2, update pos to next mddev;
6) loop 4-5 until the last mddev, then md_seq_next update pos to 2;
7) md_seq_show found pos is 2, then print unused devices;
8) md_seq_next found pos is 2, stop;
This patch remove the magic value and use seq_list_start/next/stop()
directly, and move printing "Personalities" to md_seq_start(),
"unsed devices" to md_seq_stop():
1) md_seq_start print Personalities, and then set pos to first mddev;
2) md_seq_show show mddev;
3) md_seq_next update pos to next mddev;
4) loop 2-3 until the last mddev;
5) md_seq_stop print unsed devices;
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230927061241.1552837-3-yukuai1@huaweicloud.com
Add the description for tdp_mmu_page into kvm_mmu_page description.
tdp_mmu_page is a field to differentiate shadow pages from TDP MMU and
non-TDP MMU.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230912184553.1887764-7-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add the description for mmu_valid_gen into kvm_mmu_page description.
mmu_valid_gen is used in shadow MMU for fast zapping. Update the doc to
reflect that.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230912184553.1887764-6-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add the description of tdp_mmu_root_count into kvm_mmu_page description and
combine it with the description of root_count. tdp_mmu_root_count is an
atomic counter used only in TDP MMU. Update the doc.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230912184553.1887764-5-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add the missing description for ptep in kvm_mmu_page description. ptep is
used when TDP MMU is enabled and it shares the storage with parent_ptes.
Update the doc to help readers to get up-to-date info.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230912184553.1887764-4-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Update the field 'gfns' in kvm_mmu_page to 'shadowed_translation' to be
consistent with the code. Also update the corresponding 'gfns' in the
comments. The more detailed description of 'shadowed_translation' is
already inlined in the data structure definition, so no need to duplicate
the text but simply just update the names.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230912184553.1887764-3-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add the missing description for guest_mode in kvm_mmu_page_role
description. guest_mode tells KVM whether a shadow page is used for the L1
or an L2. Update the missing field in documentation.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230912184553.1887764-2-mizhang@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Set KVM_GET_VCPU_EVENTS and KVM_SET_VCPU_EVENTS parameter type to
`struct kvm_vcpu_events`. Events, plural.
Opportunistically fix few other typos.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230814222358.707877-4-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Userspace can directly modify the content of vCPU's CR0, CR3, and CR4 via
KVM_SYNC_X86_SREGS and KVM_SET_SREGS{,2}. Make sure that KVM flushes guest
TLB entries and paging-structure caches if a (partial) guest TLB flush is
architecturally required based on the CRn changes. To keep things simple,
flush whenever KVM resets the MMU context, i.e. if any bits in CR0, CR3,
CR4, or EFER are modified. This is extreme overkill, but stuffing state
from userspace is not such a hot path that preserving guest TLB state is a
priority.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230814222358.707877-3-mhal@rbox.co
[sean: call out that the flushing on MMU context resets is for simplicity]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the vcpu->arch.cr0 assignment after static_call(kvm_x86_set_cr0).
CR0 was already set by {vmx,svm}_set_cr0().
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230814222358.707877-2-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Return an error code if devm_reset_control_get_exclusive() fails.
The current code returns success.
Fixes: 0e864b552b ("i2c: rcar: reset controller is mandatory for Gen3+")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Sometimes, our completions race with new master transfers and override
the bus->operation and bus->master_or_slave variables. This causes
transactions to timeout and kernel crashes less frequently.
To remedy this, we re-order all completions to the very end of the
function.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: William A. Kennington III <william@wkennington.com>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add an atomic_xfer method to the driver so that it behaves correctly
when controlling a PMIC that is responsible for device shutdown.
The atomic_xfer method added is similar to the one from the i2c-mv64xxx
driver. When running an atomic_xfer a bool flag in the driver data is
set, the interrupt is not unmasked on transfer start, and the IRQ
handler is manually invoked while waiting for pending transfers to
complete.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This reverts commit 88428cc4ae.
The problem this commit is intended to fix was comprehensively fixed
in commit 7de62bc09f ("SUNRPC dont update timeout value on connection
reset").
Since then, this commit has been preventing the correct timeout of soft
mounted requests.
Cc: stable@vger.kernel.org # 5.9.x: 09252177d5: SUNRPC: Handle major timeout in xprt_adjust_timeout()
Cc: stable@vger.kernel.org # 5.9.x: 7de62bc09f: SUNRPC dont update timeout value on connection reset
Cc: stable@vger.kernel.org # 5.9.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 4dc73c6791 reintroduces the deadlock that was fixed by commit
aeabb3c961 ("NFSv4: Fix a NFSv4 state manager deadlock") because it
prevents the setup of new threads to handle reboot recovery, while the
older recovery thread is stuck returning delegations.
Fixes: 4dc73c6791 ("NFSv4: keep state manager thread active if swap is enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the NFS4CLNT_RUN_MANAGER flag got set just before we cleared
NFS4CLNT_MANAGER_RUNNING, then we might have won the race against
nfs4_schedule_state_manager(), and are responsible for handling the
recovery situation.
Fixes: aeabb3c961 ("NFSv4: Fix a NFSv4 state manager deadlock")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
rpcauth_checkverf() should return a distinct error code when a
server recognizes the AUTH_TLS probe but does not support TLS so
that the client's header decoder can respond appropriately and
quickly. No retries are necessary is in this case, since the server
has already affirmatively answered "TLS is unsupported".
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct nd_region.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: nvdimm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
nd_region_acquire_lane uses get_cpu, which disables preemption. This is
an issue on PREEMPT_RT kernels, since btt_write_pg and also
nd_region_acquire_lane itself take a spin lock, resulting in BUG:
sleeping function called from invalid context.
Fix the issue by replacing get_cpu with smp_process_id and
migrate_disable when needed. This makes BTT operations preemptible, thus
permitting the use of spin_lock.
BUG example occurring when running ndctl tests on PREEMPT_RT kernel:
BUG: sleeping function called from invalid context at
kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 4903, name:
libndctl
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Preemption disabled at:
[<ffffffffc1313db5>] nd_region_acquire_lane+0x15/0x90 [libnvdimm]
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xb0
__might_resched+0x19b/0x250
rt_spin_lock+0x4c/0x100
? btt_write_pg+0x2d7/0x500 [nd_btt]
btt_write_pg+0x2d7/0x500 [nd_btt]
? local_clock_noinstr+0x9/0xc0
btt_submit_bio+0x16d/0x270 [nd_btt]
__submit_bio+0x48/0x80
__submit_bio_noacct+0x7e/0x1e0
submit_bio_wait+0x58/0xb0
__blkdev_direct_IO_simple+0x107/0x240
? inode_set_ctime_current+0x51/0x110
? __pfx_submit_bio_wait_endio+0x10/0x10
blkdev_write_iter+0x1d8/0x290
vfs_write+0x237/0x330
...
</TASK>
Fixes: 5212e11fde ("nd_btt: atomic sector updates")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Use devm_kstrdup() instead of kstrdup() and check its return value to
avoid memory leak.
Fixes: 49bddc73d1 ("libnvdimm/of_pmem: Provide a unique name for bus provider")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Single fix for libata: older devices don't support command duration
limits (CDL) and some don't support report opcodes, meaning there's no
way to tell if they support the command or not. Reduce the problems of
incorrectly using CDL commands on older devices by checking SCSI spec
compliance at SPC-5 (the spec which introduced the command) before
turning on CDL.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZRQglCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYJdAP4rjE8a
/X3Vs7C0PoFDl6HlkN3w4Eeq54vLMmxNez2tywEA6cB3RdwG58g34p8wBt7Lb6UI
1HAIhRub2mpHZyQH0/U=
=qq6Q
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A single fix for libata: older devices don't support command duration
limits (CDL) and some don't support report opcodes, meaning there's no
way to tell if they support the command or not.
Reduce the problems of incorrectly using CDL commands on older devices
by checking SCSI spec compliance at SPC-5 (the spec which introduced
the command) before turning on CDL"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: ata: Do no try to probe for CDL on old drives
- The new PDS vfio-pci variant driver only supports SR-IOV VF devices
and incorrectly made a direct reference to the physfn field of the
pci_dev. Fix this both by making the Kconfig depend on IOV support
as well as using the correct wrapper for this access. (Shixiong Ou)
- Resolve an error path issue where on unwind of the mdev registration
the created kset is not unregistered and the wrong error code is
returned. (Jinjie Ruan)
-----BEGIN PGP SIGNATURE-----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=yMVA
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.6-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- The new PDS vfio-pci variant driver only supports SR-IOV VF devices
and incorrectly made a direct reference to the physfn field of the
pci_dev. Fix this both by making the Kconfig depend on IOV support
as well as using the correct wrapper for this access (Shixiong Ou)
- Resolve an error path issue where on unwind of the mdev registration
the created kset is not unregistered and the wrong error code is
returned (Jinjie Ruan)
* tag 'vfio-v6.6-rc4' of https://github.com/awilliam/linux-vfio:
vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent()
vfio/pds: Use proper PF device access helper
vfio/pds: Add missing PCI_IOV depends
After a recent change, two variables are only used in an #ifdef:
drivers/gpu/drm/nouveau/dispnv50/disp.c: In function 'nv50_sor_atomic_disable':
drivers/gpu/drm/nouveau/dispnv50/disp.c:1569:13: error: unused variable 'ret' [-Werror=unused-variable]
1569 | int ret;
| ^~~
drivers/gpu/drm/nouveau/dispnv50/disp.c:1568:28: error: unused variable 'aux' [-Werror=unused-variable]
1568 | struct drm_dp_aux *aux = &nv_connector->aux;
| ^~~
Move them into the same conditional block, along with the nv_connector variable
that becomes unused during that fix.
Fixes: 757033808c ("drm/nouveau/kms/nv50-: fixup sink D3 before tearing down link")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925155930.677620-1-arnd@kernel.org
Changing the direct dependencies of IMA_BLACKLIST_KEYRING and
IMA_LOAD_X509 caused them to no longer depend on IMA, but a
a configuration without IMA results in link failures:
arm-linux-gnueabi-ld: security/integrity/iint.o: in function `integrity_load_keys':
iint.c:(.init.text+0xd8): undefined reference to `ima_load_x509'
aarch64-linux-ld: security/integrity/digsig_asymmetric.o: in function `asymmetric_verify':
digsig_asymmetric.c:(.text+0x104): undefined reference to `ima_blacklist_keyring'
Adding explicit dependencies on IMA would fix this, but a more reliable
way to do this is to enclose the entire Kconfig file in an 'if IMA' block.
This also allows removing the existing direct dependencies.
Fixes: be210c6d35 ("ima: Finish deprecation of IMA_TRUSTED_KEYRING Kconfig")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Normally we could be in a deep PkgC state all the way up to the
point when DSB starts its execution at the transcoders undelayed
vblank. The DSB will then have to wait for the hardware to
wake up before it can execute anything. This will waste a huge
chunk of the vblank time just waiting, and risks the DSB execution
spilling into the vertical active period. That will be very bad,
especially when programming the LUTs as the anti-collision logic
will cause DSB to corrupt LUT writes during vertical active.
To avoid these problems we can instruct the DSB to pre-wake the
display engine on a specific scanline so that everything will
be 100% ready to go when we hit the transcoder's undelayed vblank.
One annoyance is that the scanline is specified as just that,
a single scanline. So if we happen to start the DSB execution
after passing said scanline no DEwake will happen and we may drop
back into some PkgC state before reaching the transcoder's undelayed
vblank. To prevent that we'll use the "force DEwake" bit to manually
force the display engine to stay awake. We'll then have to clear
the force bit again after the DSB is done (the force bit remains
effective even when the DSB is otherwise disabled).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-18-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Add a helper to convert our idea of a scanline to the hw's idea
of the same scanline (ie. apply crtc->scanline_offset in reverse).
We'll need this to tell the DSB do stuff on a specific scanline.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-17-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
We want to start the DSB execution from the transcoder's undelayed
vblank, so in order to guarantee atomicity with the all the other
mmio register writes we need to evade both vblanks.
Note that currently we don't add any vblank delay, so this is
effectively a nop. But in the future when we start to program
double buffered registers from the DSB we'll need to delay the
pipe's vblank to provide the register programming "window2"
for the DSB.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-15-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
The DSB has problems writing the legacy LUT. The two workarounds
I've discoverted are:
- write each entry twice back to back
- use non-posted writes
Let's use non-posted writes as that seems a bit more standard.
TODO: measure which is faster
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-14-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
