Setting ACP ACLK as clock source when ACP enters D0 state causing
firmware load failure as mentioned in below scenario.
- Load snd_sof_amd_rembrandt
- Play or Record audio
- Stop audio
- Unload snd_sof_amd_rembrandt
- Reload snd_sof_amd_rembrandt
If acp_clkmux_sel register field is set, then clock source will be
set to ACP ACLK when ACP enters D0 state.
During stream stop, if there is no active stream is running then
acp firmware will set the ACP ACLK value to zero.
When driver is reloaded and clock source is selected as ACP ACLK,
as ACP ACLK is programmed to zero, firmware loading will fail.
For RMB platform, remove the clock mux selection field so that
ACP will use internal clock source when ACP enters D0 state.
Fixes: 41cb85bc4b ("ASoC: SOF: amd: Add support for Rembrandt plaform.")
Reported-by: coolstar <coolstarorganization@gmail.com>
Closes: https://github.com/thesofproject/sof/issues/8137
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230927071412.2416250-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Andrew has changed addresses and the git tree has long since been at a
different location.
-----BEGIN PGP SIGNATURE-----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=SQij
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Jbmx
-----END PGP SIGNATURE-----
Merge tag 'aspeed-6.6-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/fixes
ASPEED Maintainers update
Andrew has changed addresses and the git tree has long since been at a
different location.
* tag 'aspeed-6.6-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
MAINTAINERS: aspeed: Update Andrew's email address
MAINTAINERS: aspeed: Update git tree URL
Link: https://lore.kernel.org/r/CACPK8Xc+D=YBc2Dhk-6-gOuvKN0xGgZYNop6oJVa=VNgaEYOHw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The syscon poweroff and reboot nodes logically belong to the Power
Management Unit so populate possible children.
Without it, the reboot/poweroff feature becomes unavailable.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The reboot and poweroff features are actually part of the Power
Management Unit system controller, thus allow them as its children,
instead of specifying as separate device nodes with syscon phandle.
Without it, the reboot/poweroff feature becomes unavailable.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now, "loongson,ls2k0500-pmc" is used as fallback compatible, so the
ls2k1000 compatible in the driver can be dropped directly.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Loongson-2K series chips (ls2k0500/ls2k1000/ls2k2000) share the same
PM system controller, using ls2k0500 compatible as fallback for the
others.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 67694c076b ("soc: loongson2_pm: add power management
support"), the Loongson-2K PM driver was added, but it didn't update the
Kconfig entry for the INPUT dependency, leading to build errors, so
update the Kconfig entry to depend on INPUT.
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld:
drivers/soc/loongson/loongson2_pm.o: in function `loongson2_power_button_init':
/work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:101:(.text+0x350): undefined reference to `input_allocate_device'
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld:
/work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:109:(.text+0x3dc): undefined reference to `input_set_capability'
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld:
/work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:111:(.text+0x3e4): undefined reference to `input_register_device'
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld:
/work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:125:(.text+0x3fc): undefined reference to `input_free_device'
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: drivers/soc/loongson/loongson2_pm.o: in function `input_report_key':
/work/lnx/next/linux-next-20230825/LOONG64/../include/linux/input.h:425:(.text+0x58c): undefined reference to `input_event'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Starfive:
A fix for the size of the NOR flash that was causing complaints from the
MTD subsystem during boot & two issues that a certain someone introduced
while resolving merge conflicts. Of the latter, one is a cosmetic
ordering change & the other lead to the usb controller being disabled.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZQWTcwAKCRB4tDGHoIJi
0ne4AP9ZmfxP2ddJK1YehAz1UBya0SyepjQKRuYySA9x+x9tGQD9GJo8mZj7RKoT
NLC+pBByca0YfsFKGtTLYQgljOjSUAg=
=noL2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=YF+6
-----END PGP SIGNATURE-----
Merge tag 'riscv-dt-fixes-for-v6.6-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fixes for v6.6-rc3
Starfive:
A fix for the size of the NOR flash that was causing complaints from the
MTD subsystem during boot & two issues that a certain someone introduced
while resolving merge conflicts. Of the latter, one is a cosmetic
ordering change & the other lead to the usb controller being disabled.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.6-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: visionfive 2: Fix uart0 pins sort order
riscv: dts: starfive: visionfive 2: Enable usb0
riscv: dts: starfive: fix NOR flash reserved-data partition size
Link: https://lore.kernel.org/r/20230916-previous-oversold-9d30891ac6cf@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is no code for this config option and enabling it in defconfig
causes warnings from tools which are detecting unused and obsolete
kernel config flags since the flag will be completely missing from
effective build config after "make olddefconfig".
Fixes yocto kernel recipe build time warning:
WARNING: [kernel config]: This BSP contains fragments with warnings:
...
[INFO]: the following symbols were not found in the active
configuration:
- CONFIG_COMMON_CLK_NPCM8XX
The flag was added with commit 45472f1e53
v5.19-rc4-15-g45472f1e5348 so 6.1 and 6.4 stable kernel trees are
affected.
Fixes: 45472f1e53 ("arm64: defconfig: Add Nuvoton NPCM family support")
Cc: stable@kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Cc: Bruce Ashfield <bruce.ashfield@gmail.com>
Cc: Jon Mason <jon.mason@arm.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Ross Burton <ross@burtonini.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes for several ti-sysc interconnect target module driver issues for
external abort on non-linefetch, am35x soc match, and uart module quirks
handling needed for devices to work and to allow device wake-up to work.
Fixes for droid4 boot time errors and warnings as noticed after boot doing
dmesg -lerr,warn. Let's also cut down the debug uart noise by using
overrun-throttle-ms, and downgrade the u-boot version warnings to
debug statements to further reduce the boot time noise with warnings.
-----BEGIN PGP SIGNATURE-----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=MC3p
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=IurW
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v6.6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps and ti-sysc
Fixes for several ti-sysc interconnect target module driver issues for
external abort on non-linefetch, am35x soc match, and uart module quirks
handling needed for devices to work and to allow device wake-up to work.
Fixes for droid4 boot time errors and warnings as noticed after boot doing
dmesg -lerr,warn. Let's also cut down the debug uart noise by using
overrun-throttle-ms, and downgrade the u-boot version warnings to
debug statements to further reduce the boot time noise with warnings.
* tag 'omap-for-v6.6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-up
ARM: omap2+: Downgrade u-boot version warnings to debug statements
ARM: dts: ti: omap: Fix noisy serial with overrun-throttle-ms for mapphone
ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot
ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4
bus: ti-sysc: Fix missing AM35xx SoC matching
bus: ti-sysc: Use fsleep() instead of usleep_range() in sysc_reset()
Link: https://lore.kernel.org/r/pull-1695715881-95183@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the peripherals clock controller driver in the S4 SoC family.
[jbrunet: remove extra new line at end of s4-peripherals.h]
Signed-off-by: Yu Tu <yu.tu@amlogic.com>
Link: https://lore.kernel.org/r/20230904075504.23263-5-yu.tu@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
CPU core bringup on SH-Mobile AG5 uses the SYS Boot Address (SBAR) and
Address Translation Area (APARMBAREA) registers to specify the base
address and size of the boot area of the System CPU. With this enabled,
when the System CPU accesses a physical address in the range from zero
up to the configured size, the top address bits are replaced by those
specified in the SBAR register. Hence any device residing in this low
part of physical address space cannot be accessed.
Prevent conflicts by reserving this memory region using
request_mem_region().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20eb4e7fca9c41a34500fc5984602b41006b4575.1693409184.git.geert+renesas@glider.be
CPU core bringup on R-Car H1 uses the ARM Reset Vector Address Register
(AVECR) to specify the base address and size of the boot area of the
System CPU. With this enabled, when the System CPU accesses a physical
address in the range from zero up to the configured size, the top
address bits are replaced by those specified in the AVECR register.
Hence any device residing in this low part of physical address space
cannot be accessed,
Prevent conflicts by reserving this memory region using
request_mem_region().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/924961188abdf2adb52167edb7ed848a6efcca39.1693409184.git.geert+renesas@glider.be
CPU core bringup on R-Car Gen2 SoCs uses the Cortex-A7/A15 Boot Address
Register to specify the boot area of the System CPU. With this enabled,
when the System CPU accesses a physical address in the range from 0x0 to
0x3ffff, the top address bits are replaced by those specified in the
SBAR register. Hence any device residing in the low 256 KiB of physical
address space cannot be accessed.
Prevent conflicts by reserving this memory region using
request_mem_region().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/091150233acb0557a2ad3294d67b2adb6758670c.1693409184.git.geert+renesas@glider.be
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct uniphier_pinctrl_reg_region.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175006.work.421-kees@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These errors are not quite clear without also logging they device tree node
being parsed, especially when the pinmux node has lots of subnodes. Adding
the node name helps a lot in finding the node that triggers the error.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230926103938.334055-1-luca.ceresoli@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Let the V4L2 core fill in bus_info.
This fixes this warning:
drivers/media/radio/radio-si476x.c: In function 'si476x_radio_querycap':
drivers/media/radio/radio-si476x.c:333:28: warning: '%s' directive output may be truncated writing up to 35 bytes into a region of size 23 [-Wformat-truncation=]
333 | "platform:%s", radio->v4l2dev.name);
| ^~
drivers/media/radio/radio-si476x.c:332:9: note: 'snprintf' output between 10 and 45 bytes into a destination of size 32
332 | snprintf(capability->bus_info, sizeof(capability->bus_info),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
333 | "platform:%s", radio->v4l2dev.name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes this warning:
drivers/media/platform/verisilicon/hantro_drv.c: In function 'hantro_add_func':
drivers/media/platform/verisilicon/hantro_drv.c:902:49: warning: '%s' directive output may be truncated writing up to 127 bytes into a region of size 64 [-Wformat-truncation=]
902 | snprintf(vfd->name, sizeof(vfd->name), "%s-%s", match->compatible,
| ^~
drivers/media/platform/verisilicon/hantro_drv.c:902:9: note: 'snprintf' output between 5 and 132 bytes into a destination of size 64
902 | snprintf(vfd->name, sizeof(vfd->name), "%s-%s", match->compatible,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
903 | funcid == MEDIA_ENT_F_PROC_VIDEO_ENCODER ? "enc" : "dec");
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/platform/verisilicon/hantro_drv.c:902:49: warning: '%s' directive output may be truncated writing up to 127 bytes into a region of size 64 [-Wformat-truncation=]
902 | snprintf(vfd->name, sizeof(vfd->name), "%s-%s", match->compatible,
| ^~
drivers/media/platform/verisilicon/hantro_drv.c:902:9: note: 'snprintf' output between 5 and 132 bytes into a destination of size 64
902 | snprintf(vfd->name, sizeof(vfd->name), "%s-%s", match->compatible,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
903 | funcid == MEDIA_ENT_F_PROC_VIDEO_ENCODER ? "enc" : "dec");
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fill in bus_info with fixed name.
This fixes this compiler warning:
drivers/media/radio/radio-miropcm20.c: In function 'vidioc_querycap':
drivers/media/radio/radio-miropcm20.c:206:57: warning: '%s' directive output may be truncated writing up to 35 bytes into a region of size 28 [-Wformat-truncation=]
206 | snprintf(v->bus_info, sizeof(v->bus_info), "ISA:%s", dev->v4l2_dev.name);
| ^~
drivers/media/radio/radio-miropcm20.c:206:9: note: 'snprintf' output between 5 and 40 bytes into a destination of size 32
206 | snprintf(v->bus_info, sizeof(v->bus_info), "ISA:%s", dev->v4l2_dev.name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This fixes this warning:
drivers/media/radio/radio-isa.c: In function 'radio_isa_querycap':
drivers/media/radio/radio-isa.c:39:57: warning: '%s' directive output may be truncated writing up to 35 bytes into a region of size 28 [-Wformat-truncation=]
39 | snprintf(v->bus_info, sizeof(v->bus_info), "ISA:%s", isa->v4l2_dev.name);
| ^~
drivers/media/radio/radio-isa.c:39:9: note: 'snprintf' output between 5 and 40 bytes into a destination of size 32
39 | snprintf(v->bus_info, sizeof(v->bus_info), "ISA:%s", isa->v4l2_dev.name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Let the V4L2 core fill this in.
Fixes this warning:
drivers/staging/media/deprecated/atmel/atmel-isc-base.c: In function 'isc_querycap':
drivers/staging/media/deprecated/atmel/atmel-isc-base.c:496:28: warning: '%s' directive output may be truncated writing up to 35 bytes into a region of size 23 [-Wformat-truncation=]
496 | "platform:%s", isc->v4l2_dev.name);
| ^~
drivers/staging/media/deprecated/atmel/atmel-isc-base.c:495:9: note: 'snprintf' output between 10 and 45 bytes into a destination of size 32
495 | snprintf(cap->bus_info, sizeof(cap->bus_info),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
496 | "platform:%s", isc->v4l2_dev.name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Let the V4L2 core fill this in.
This fixes this warning:
drivers/media/platform/ti/am437x/am437x-vpfe.c: In function 'vpfe_querycap':
drivers/media/platform/ti/am437x/am437x-vpfe.c:1279:35: warning: '%s' directive output may be truncated writing up to 35 bytes into a region of size 23 [-Wformat-truncation=]
1279 | "platform:%s", vpfe->v4l2_dev.name);
| ^~
drivers/media/platform/ti/am437x/am437x-vpfe.c:1278:9: note: 'snprintf' output between 10 and 45 bytes into a destination of size 32
1278 | snprintf(cap->bus_info, sizeof(cap->bus_info),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1279 | "platform:%s", vpfe->v4l2_dev.name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Fixes this compiler warning:
drivers/media/platform/renesas/rcar_drif.c: In function 'rcar_drif_querycap':
drivers/media/platform/renesas/rcar_drif.c:874:66: warning: '%s' directive output may be truncated writing up to 63 bytes into a region of size 23 [-Wformat-truncation=]
874 | snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
| ^~
drivers/media/platform/renesas/rcar_drif.c:874:9: note: 'snprintf' output between 10 and 73 bytes into a destination of size 32
874 | snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
875 | sdr->vdev->name);
| ~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Let the V4L2 core fill this in.
Fixes these compiler warnings:
drivers/media/platform/microchip/microchip-isc-base.c: In function 'isc_querycap':
drivers/media/platform/microchip/microchip-isc-base.c:486:28: warning: '%s' directive output may be truncated writing up to 35 bytes into a region of size 23 [-Wformat-truncation=]
486 | "platform:%s", isc->v4l2_dev.name);
| ^~
drivers/media/platform/microchip/microchip-isc-base.c:485:9: note: 'snprintf' output between 10 and 45 bytes into a destination of size 32
485 | snprintf(cap->bus_info, sizeof(cap->bus_info),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
486 | "platform:%s", isc->v4l2_dev.name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/platform/microchip/microchip-isc-base.c: In function 'isc_mc_init':
drivers/media/platform/microchip/microchip-isc-base.c:1996:76: warning: '%s' directive output may be truncated writing up to 35 bytes into a region of size 23 [-Wformat-truncation=]
1996 | snprintf(isc->mdev.bus_info, sizeof(isc->mdev.bus_info), "platform:%s",
| ^~
drivers/media/platform/microchip/microchip-isc-base.c:1996:9: note: 'snprintf' output between 10 and 45 bytes into a destination of size 32
1996 | snprintf(isc->mdev.bus_info, sizeof(isc->mdev.bus_info), "platform:%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1997 | isc->v4l2_dev.name);
| ~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes this compiler warning:
drivers/media/test-drivers/vivid/vivid-core.c: In function 'vidioc_querycap':
drivers/media/test-drivers/vivid/vivid-core.c:243:35: warning: '%s' directive output may be truncated writing up to 35 bytes into a region of size 23 [-Wformat-truncation=]
243 | "platform:%s", dev->v4l2_dev.name);
| ^~
drivers/media/test-drivers/vivid/vivid-core.c:242:9: note: 'snprintf' output between 10 and 45 bytes into a destination of size 32
242 | snprintf(cap->bus_info, sizeof(cap->bus_info),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
243 | "platform:%s", dev->v4l2_dev.name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Don't use defines for the size of a name field, everyone
should just use sizeof(). In this case it was never used,
but it is bad practice, so just drop it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Don't rely on a define, let the compiler use the actual
field size.
Remove all uses of the V4L2_SUBDEV_NAME_SIZE define and also
drop the define itself.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes this compiler warning:
drivers/media/pci/zoran/zoran_card.c: In function 'zoran_probe':
drivers/media/pci/zoran/zoran_card.c:1316:62: warning: '%u' directive output may be truncated writing between 1 and 5 bytes into a region of size between 0 and 31 [-Wformat-truncation=]
1316 | snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "%s[%u]",
| ^~
drivers/media/pci/zoran/zoran_card.c:1316:58: note: directive argument in the range [0, 65535]
1316 | snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "%s[%u]",
| ^~~~~~~~
drivers/media/pci/zoran/zoran_card.c:1316:9: note: 'snprintf' output between 4 and 39 bytes into a destination of size 32
1316 | snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "%s[%u]",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1317 | zr->card.name, zr->id);
| ~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Just show the Camera index as input name in VIDIOC_ENUM_INPUT,
no need to show the subdev name as well as that is meaningless for
users anyway.
This fixes this compiler warning:
drivers/media/platform/renesas/renesas-ceu.c: In function 'ceu_enum_input':
drivers/media/platform/renesas/renesas-ceu.c:1195:59: warning: '%s' directive output may be truncated writing up to 47 bytes into a region of size between 14 and 23 [-Wformat-truncation=]
1195 | snprintf(inp->name, sizeof(inp->name), "Camera%u: %s",
| ^~
drivers/media/platform/renesas/renesas-ceu.c:1195:9: note: 'snprintf' output between 10 and 66 bytes into a destination of size 32
1195 | snprintf(inp->name, sizeof(inp->name), "Camera%u: %s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1196 | inp->index, ceusd->v4l2_sd->name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Fixes this compiler warning:
drivers/media/cec/core/cec-core.c: In function 'cec_allocate_adapter':
drivers/media/cec/core/cec-core.c:317:21: warning: '/input0' directive output may be truncated writing 7 bytes into a region of size between 1 and 32 [-Wformat-truncation=]
317 | "%s/input0", adap->name);
| ^~~~~~~
drivers/media/cec/core/cec-core.c:316:9: note: 'snprintf' output between 8 and 39 bytes into a destination of size 32
316 | snprintf(adap->input_phys, sizeof(adap->input_phys),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
317 | "%s/input0", adap->name);
| ~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes this compiler warning:
drivers/media/rc/ati_remote.c: In function 'ati_remote_probe':
drivers/media/rc/ati_remote.c:876:21: warning: ' mouse' directive output may be truncated writing 6 bytes into a region of size between 1 and 80 [-Wformat-truncation=]
876 | "%s mouse", ati_remote->rc_name);
| ^~~~~~
drivers/media/rc/ati_remote.c:875:9: note: 'snprintf' output between 7 and 86 bytes into a destination of size 80
875 | snprintf(ati_remote->mouse_name, sizeof(ati_remote->mouse_name),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
876 | "%s mouse", ati_remote->rc_name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sean Young <sean@mess.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Fixes this compiler warning:
drivers/media/pci/cx18/cx18-driver.c: In function 'cx18_init_struct1':
drivers/media/pci/cx18/cx18-driver.c:688:65: warning: '%s' directive output may be truncated writing up to 35 bytes into a region of size 11 [-Wformat-truncation=]
688 | snprintf(cx->in_workq_name, sizeof(cx->in_workq_name), "%s-in",
| ^~
In function 'cx18_create_in_workq',
inlined from 'cx18_init_struct1' at drivers/media/pci/cx18/cx18-driver.c:724:8:
drivers/media/pci/cx18/cx18-driver.c:688:9: note: 'snprintf' output between 4 and 39 bytes into a destination of size 11
688 | snprintf(cx->in_workq_name, sizeof(cx->in_workq_name), "%s-in",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
689 | cx->v4l2_dev.name);
| ~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Fixes this compiler warning:
In file included from include/linux/property.h:14,
from include/linux/acpi.h:16,
from drivers/media/pci/intel/ipu-bridge.c:4:
In function 'ipu_bridge_init_swnode_names',
inlined from 'ipu_bridge_create_connection_swnodes' at drivers/media/pci/intel/ipu-bridge.c:445:2,
inlined from 'ipu_bridge_connect_sensor' at drivers/media/pci/intel/ipu-bridge.c:656:3:
include/linux/fwnode.h:81:49: warning: '%u' directive output may be truncated writing between 1 and 3 bytes into a region of size 2 [-Wformat-truncation=]
81 | #define SWNODE_GRAPH_PORT_NAME_FMT "port@%u"
| ^~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:384:18: note: in expansion of macro 'SWNODE_GRAPH_PORT_NAME_FMT'
384 | SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/fwnode.h: In function 'ipu_bridge_connect_sensor':
include/linux/fwnode.h:81:55: note: format string is defined here
81 | #define SWNODE_GRAPH_PORT_NAME_FMT "port@%u"
| ^~
In function 'ipu_bridge_init_swnode_names',
inlined from 'ipu_bridge_create_connection_swnodes' at drivers/media/pci/intel/ipu-bridge.c:445:2,
inlined from 'ipu_bridge_connect_sensor' at drivers/media/pci/intel/ipu-bridge.c:656:3:
include/linux/fwnode.h:81:49: note: directive argument in the range [0, 255]
81 | #define SWNODE_GRAPH_PORT_NAME_FMT "port@%u"
| ^~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:384:18: note: in expansion of macro 'SWNODE_GRAPH_PORT_NAME_FMT'
384 | SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:382:9: note: 'snprintf' output between 7 and 9 bytes into a destination of size 7
382 | snprintf(sensor->node_names.remote_port,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
383 | sizeof(sensor->node_names.remote_port),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
384 | SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Fixes these compiler warnings:
drivers/media/test-drivers/vivid/vivid-rds-gen.c: In function 'vivid_rds_gen_fill':
drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:56: warning: '.' directive output may be truncated writing 1 byte into a region of size between 0 and 3 [-Wformat-truncation=]
147 | snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
| ^
drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:52: note: directive argument in the range [0, 9]
147 | snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
| ^~~~~~~~~
drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:9: note: 'snprintf' output between 9 and 12 bytes into a destination of size 9
147 | snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
148 | freq / 16, ((freq & 0xf) * 10) / 16);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Fixes these compiler warnings:
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c: In function 'ia_css_debug_pipe_graph_dump_stage':
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2786:66: warning: '\n' directive output may be truncated writing 2 bytes into a region of size between 0 and 198 [-Wformat-truncation=]
2786 | "%s\\n%s\\n%s",
| ^~~
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2785:49: note: 'snprintf' output between 5 and 302 bytes into a destination of size 200
2785 | snprintf(enable_info, sizeof(enable_info),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2786 | "%s\\n%s\\n%s",
| ~~~~~~~~~~~~~~~
2787 | enable_info1, enable_info2,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
2788 | enable_info3);
| ~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2772:66: warning: '\n' directive output may be truncated writing 2 bytes into a region of size between 0 and 198 [-Wformat-truncation=]
2772 | "%s\\n%s\\n%s",
| ^~~
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2771:49: note: 'snprintf' output between 5 and 302 bytes into a destination of size 200
2771 | snprintf(enable_info, sizeof(enable_info),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2772 | "%s\\n%s\\n%s",
| ~~~~~~~~~~~~~~~
2773 | enable_info1, enable_info2,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
2774 | enable_info3);
| ~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2749:92: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=]
2749 | snprintf(enable_info, sizeof(enable_info), "%s\\n%s",
| ^
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2749:41: note: 'snprintf' output between 3 and 201 bytes into a destination of size 200
2749 | snprintf(enable_info, sizeof(enable_info), "%s\\n%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2750 | enable_info1, enable_info2);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Fixes this compiler warning:
drivers/media/platform/cadence/cdns-csi2tx.c: In function 'csi2tx_get_resources':
drivers/media/platform/cadence/cdns-csi2tx.c:485:63: warning: '%u' directive output may be truncated writing between 1 and 10 bytes into a region of size 8 [-Wformat-truncation=]
485 | snprintf(clk_name, sizeof(clk_name), "pixel_if%u_clk", i);
| ^~
drivers/media/platform/cadence/cdns-csi2tx.c:485:54: note: directive argument in the range [0, 4294967294]
485 | snprintf(clk_name, sizeof(clk_name), "pixel_if%u_clk", i);
| ^~~~~~~~~~~~~~~~
drivers/media/platform/cadence/cdns-csi2tx.c:485:17: note: 'snprintf' output between 14 and 23 bytes into a destination of size 16
485 | snprintf(clk_name, sizeof(clk_name), "pixel_if%u_clk", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Fixes this compile error
drivers/media/platform/allegro-dvt/allegro-mail.c: In function 'msg_type_name':
drivers/media/platform/allegro-dvt/allegro-mail.c:37:48: warning: '%04x' directive output may be truncated writing between 4 and 8 bytes into a region of size 6 [-Wformat-truncation=]
37 | snprintf(buf, sizeof(buf), "(0x%04x)", type);
| ^~~~
drivers/media/platform/allegro-dvt/allegro-mail.c:37:44: note: directive argument in the range [1, 4294967295]
37 | snprintf(buf, sizeof(buf), "(0x%04x)", type);
| ^~~~~~~~~~
drivers/media/platform/allegro-dvt/allegro-mail.c:37:17: note: 'snprintf' output between 9 and 13 bytes into a destination of size 9
37 | snprintf(buf, sizeof(buf), "(0x%04x)", type);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
If CONFIG_FORTIFY_SOURCE=y, then this warning is produced:
In file included from ./include/linux/string.h:254,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:23,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:9,
from ./include/linux/preempt.h:79,
from ./include/linux/spinlock.h:56,
from ./include/linux/mmzone.h:8,
from ./include/linux/gfp.h:7,
from ./include/linux/slab.h:16,
from ./drivers/staging/media/atomisp//include/hmm/hmm.h:26,
from drivers/staging/media/atomisp/pci/sh_css_params.c:26:
In function ‘fortify_memcpy_chk’,
inlined from ‘sh_css_store_sp_group_to_ddr’ at drivers/staging/media/atomisp/pci/sh_css_params.c:3736:3:
./include/linux/fortify-string.h:592:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()?
[-Wattribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The reason is that the memcpy copies two fields (each a u8), when the source
pointer points to the first field. It's a bit unexpected, so just make this
explicit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>